Geology topics

Research about Hawaii

Source-linked reports with geographic coverage including Hawaii.

At least 487 records · Page 27Linked to original sources

USGS2016

Panel regressions to estimate low-flow response to rainfall variability in ungaged basins

Multicollinearity and omitted-variable bias are major limitations to developing multiple linear regression models to estimate streamflow characteristics in ungaged areas and varying rainfall conditions. Panel regression is used to overcome limitations of traditional regression methods, and obtain reliable model coefficients, in particular to understand the elasticity of streamflow to rainfall. Using annual rainfall and selected basin characteristics at 86 gaged streams in the Hawaiian Islands, regional regression models for three stream classes were developed to estimate the annual low-flow duration discharges. Three panel-regression structures (random effects, fixed effects, and pooled) were compared to traditional regression methods, in which space is substituted for time. Results indicated that panel regression generally was able to reproduce the temporal behavior of streamflow and reduce the standard errors of model coefficients compared to traditional regression, even for models in which the unobserved heterogeneity between streams is significant and the variance inflation factor for rainfall is much greater than 10. This is because both spatial and temporal variability were better characterized in panel regression. In a case study, regional rainfall elasticities estimated from panel regressions were applied to ungaged basins on Maui, using available rainfall projections to estimate plausible changes in surface-water availability and usable stream habitat for native species. The presented panel-regression framework is shown to offer benefits over existing traditional hydrologic regression methods for developing robust regional relations to investigate streamflow response in a changing climate.

Hawaii↗

USGS2016

Feasibility study of earthquake early warning (EEW) in Hawaii

The effects of earthquake shaking on the population and infrastructure across the State of Hawaii could be catastrophic, and the high seismic hazard in the region emphasizes the likelihood of such an event. Earthquake early warning (EEW) has the potential to give several seconds of warning before strong shaking starts, and thus reduce loss of life and damage to property. The two approaches to EEW are (1) a network approach (such as ShakeAlert or ElarmS) where the regional seismic network is used to detect the earthquake and distribute the alarm and (2) a local approach where a critical facility has a single seismometer (or small array) and a warning system on the premises. The network approach, also referred to here as ShakeAlert or ElarmS, uses the closest stations within a regional seismic network to detect and characterize an earthquake. Most parameters used for a network approach require observations on multiple stations (typically 3 or 4), which slows down the alarm time slightly, but the alarms are generally more reliable than with single-station EEW approaches. The network approach also benefits from having stations closer to the source of any potentially damaging earthquake, so that alarms can be sent ahead to anyone who subscribes to receive the notification. Thus, a fully implemented ShakeAlert system can provide seconds of warning for both critical facilities and general populations ahead of damaging earthquake shaking. The cost to implement and maintain a fully operational ShakeAlert system is high compared to a local approach or single-station solution, but the benefits of a ShakeAlert system would be felt statewide—the warning times for strong shaking are potentially longer for most sources at most locations. The local approach, referred to herein as “single station,” uses measurements from a single seismometer to assess whether strong earthquake shaking can be expected. Because of the reliance on a single station, false alarms are more common than when using a regional network of seismometers. Given the current network, a single-station approach provides more warning for damaging earthquakes that occur close to the station, but it would have limited benefit compared to a fully implemented ShakeAlert system. For Honolulu, for example, the single-station approach provides an advantage over ShakeAlert only for earthquakes that occur in a narrow zone extending northeast and southwest of O‘ahu. Instrumentation and alarms associated with the single-station approach are typically maintained and assessed within the target facility, and thus no outside connectivity is required. A single-station approach, then, is unlikely to help broader populations beyond the individuals at the target facility, but they have the benefit of being commercially available for relatively little cost. The USGS Hawaiian Volcano Observatory (HVO) is the Advanced National Seismic System (ANSS) regional seismic network responsible for locating and characterizing earthquakes across the State of Hawaii. During 2014 and 2015, HVO tested a network-based EEW algorithm within the current seismic network in order to assess the suitability for building a full EEW system. Using the current seismic instrumentation and processing setup at HVO, it is possible for a network approach to release an alarm a little more than 3 seconds after the earthquake is recorded on the fourth seismometer. Presently, earthquakes having M≥3 detected with the ElarmS algorithm have an average location error of approximately 4.5 km and an average magnitude error of -0.3 compared to the reviewed catalog locations from the HVO. Additional stations and upgrades to existing seismic stations would serve to improve solution precision and warning times and additional staffing would be required to provide support for a robust, network-based EEW system. For a critical facility on the Island of Hawaiʻi, such as the telescopes atop Mauna Kea, one phased approach to mitigate losses could be to immediately install a single station system to establish some level of warning. Subsequently, supporting the implementation of a full network-based EEW system on the Island of Hawaiʻi would provide additional benefit in the form of improved warning times once the system is fully installed and operational, which may take several years. Distributed populations across the Hawaiian Islands, including those outside the major cities and far from the likely earthquake source areas, would likely only benefit from a network approach such as ShakeAlert to provide warnings of strong shaking.

Hawaii↗

USGS2016

Magma decompression rates during explosive eruptions of Kīlauea volcano, Hawaii, recorded by melt embayments

The decompression rate of magma as it ascends during volcanic eruptions is an important but poorly constrained parameter that controls many of the processes that influence eruptive behavior. In this study, we quantify decompression rates for basaltic magmas using volatile diffusion in olivine-hosted melt tubes (embayments) for three contrasting eruptions of Kīlauea volcano, Hawaii. Incomplete exsolution of H 2 O, CO 2 , and S from the embayment melts during eruptive ascent creates diffusion profiles that can be measured using microanalytical techniques, and then modeled to infer the average decompression rate. We obtain average rates of ~0.05–0.45 MPa s −1 for eruptions ranging from Hawaiian style fountains to basaltic subplinian, with the more intense eruptions having higher rates. The ascent timescales for these magmas vary from around ~5 to ~36 min from depths of ~2 to ~4 km, respectively. Decompression-exsolution models based on the embayment data also allow for an estimate of the mass fraction of pre-existing exsolved volatiles within the magma body. In the eruptions studied, this varies from 0.1 to 3.2 wt% but does not appear to be the key control on eruptive intensity. Our results do not support a direct link between the concentration of pre-eruptive volatiles and eruptive intensity; rather, they suggest that for these eruptions, decompression rates are proportional to independent estimates of mass discharge rate. Although the intensity of eruptions is defined by the discharge rate, based on the currently available dataset of embayment analyses, it does not appear to scale linearly with average decompression rate. This study demonstrates the utility of the embayment method for providing quantitative constraints on magma ascent during explosive basaltic eruptions.

Hawaii↗

USGS2016

Insights into shallow magmatic processes at Kīlauea Volcano, Hawaiʻi, from a multiyear continuous gravity time series

Continuous gravity data collected near the summit eruptive vent at Kīlauea Volcano, Hawaiʻi, during 2011–2015 show a strong correlation with summit-area surface deformation and the level of the lava lake within the vent over periods of days to weeks, suggesting that changes in gravity reflect variations in volcanic activity. Joint analysis of gravity and lava level time series data indicates that over the entire time period studied, the average density of the lava within the upper tens to hundreds of meters of the summit eruptive vent remained low—approximately 1000–1500 kg/m 3 . The ratio of gravity change (adjusted for Earth tides and instrumental drift) to lava level change measured over 15 day windows rose gradually over the course of 2011–2015, probably reflecting either (1) a small increase in the density of lava within the eruptive vent or (2) an increase in the volume of lava within the vent due to gradual vent enlargement. Superimposed on the overall time series were transient spikes of mass change associated with inflation and deflation of Kīlauea's summit and coincident changes in lava level. The unexpectedly strong mass variations during these episodes suggest magma flux to and from the shallow magmatic system without commensurate deformation, perhaps indicating magma accumulation within, and withdrawal from, void space—a process that might not otherwise be apparent from lava level and deformation data alone. Continuous gravity data thus provide unique insights into magmatic processes, arguing for continued application of the method at other frequently active volcanoes.

Hawaii↗

USGS2016

Report from the workshop on climate downscaling and its application in high Hawaiian Islands, September 16–17, 2015

In the subtropical and tropical Pacific islands, changing climate is predicted to influence precipitation and freshwater availability, and thus is predicted to impact ecosystems goods and services available to ecosystems and human communities. The small size of high Hawaiian Islands, plus their complex microlandscapes, require downscaling of global climate models to provide future projections of greater skill and spatial resolution. Two different climate modeling approaches (physics-based dynamical downscaling and statistics-based downscaling) have produced dissimilar projections. Because of these disparities, natural resource managers and decision makers have low confidence in using the modeling results and are therefore are unwilling to include climate-related projections in their decisions. In September 2015, the Pacific Islands Climate Science Center (PICSC), the Pacific Islands Climate Change Cooperative (PICCC), and the Pacific Regional Integrated Sciences and Assessments (Pacific RISA) program convened a 2-day facilitated workshop in which the two modeling teams, plus key model users and resource managers, were brought together for a comparison of the two approaches, culminating with a discussion of how to provide predictions that are useable by resource managers. The proceedings, discussions, and outcomes of this Workshop are summarized in this Open-File Report.

Hawaii↗

USGS2016

Community exposure to tsunami hazards in Hawai‘i

Hawai ‘ i has experienced numerous destructive tsunamis and the potential for future inundation has been described over the years using various historical events and scenarios. To support tsunami preparedness and risk-reduction planning in Hawai ‘ i, this study documents the variations among 91 coastal communities and 4 counties in the amounts, types, and percentages of developed land, residents, employees, community-support businesses, dependent-care facilities, public venues, and critical facilities in a composite extreme tsunami-inundation zone associated with two great Aleutian moment magnitude ( M w ) 9.3 and 9.6 earthquake scenarios. These earthquake scenarios are considered to provide the maximum tsunami scenario for the Hawaiian Islands. According to 2010 U.S. Census Bureau data, the Hawa i‘i extreme tsunami-inundation zone contains approximately 248,749 residents and 91,528 households (18 and 20 percent, respectively, of State totals). The residential population in tsunami-prone areas is racially diverse, with most residents identifying themselves as White (47 percent of the total exposed population), Asian (48 percent), or Native Hawaiian and Other Pacific Islander (29 percent), either alone or in combination with one or more other races (note that race categories do not sum to 100 percent because individuals were able to report multiple races in the 2010 U.S. Census). A total of 50,016 households are renter-occupied, making up 55 percent of total households in the extreme inundation zone. The extreme tsunami-inundation zone contains 18,693 businesses (37 percent of State totals) and 245,827 employees (42 percent of the State labor force). The employee population in the extreme tsunami-inundation zone is largely in the accommodation and food services and retail-trade sectors. Although occupancy values are not known for each facility, the extreme tsunami-inundation zone also contains numerous community-support businesses (for example, religious organizations and markets), dependent-care facilities (for example, child-day-care facilities and schools), public venues (for example, colleges and entertainment venues), and critical facilities (for example, fire stations and electric companies). Community exposure to tsunamis in Hawai ‘ i varies considerably—some communities may experience great losses that reflect only a small part of their community and others may experience relatively small losses that devastate them. Among the 91 communities and 4 counties, Urban Honolulu has the highest number of people and businesses in the extreme tsunami-inundation zone, and Hanalei has the highest percentages of its people and businesses in this zone. Urban Honolulu has the highest combination of the number and percentage of people, businesses, and facilities in the hazard zone. This report will further the dialogue on societal risk to tsunami hazards in Hawai ‘ i and help identify future preparedness, mitigation, response, and recovery planning needs within coastal communities and economic sectors of the State of Hawaii.

Hawaii↗

USGS2016

Reconstruction of far-field tsunami amplitude distributions from earthquake sources

The probability distribution of far-field tsunami amplitudes is explained in relation to the distribution of seismic moment at subduction zones. Tsunami amplitude distributions at tide gauge stations follow a similar functional form, well described by a tapered Pareto distribution that is parameterized by a power-law exponent and a corner amplitude. Distribution parameters are first established for eight tide gauge stations in the Pacific, using maximum likelihood estimation. A procedure is then developed to reconstruct the tsunami amplitude distribution that consists of four steps: (1) define the distribution of seismic moment at subduction zones; (2) establish a source-station scaling relation from regression analysis; (3) transform the seismic moment distribution to a tsunami amplitude distribution for each subduction zone; and (4) mix the transformed distribution for all subduction zones to an aggregate tsunami amplitude distribution specific to the tide gauge station. The tsunami amplitude distribution is adequately reconstructed for four tide gauge stations using globally constant seismic moment distribution parameters established in previous studies. In comparisons to empirical tsunami amplitude distributions from maximum likelihood estimation, the reconstructed distributions consistently exhibit higher corner amplitude values, implying that in most cases, the empirical catalogs are too short to include the largest amplitudes. Because the reconstructed distribution is based on a catalog of earthquakes that is much larger than the tsunami catalog, it is less susceptible to the effects of record-breaking events and more indicative of the actual distribution of tsunami amplitudes.

Hawaii↗

USGS2016

Lithospheric flexure under the Hawaiian volcanic load: Internal stresses and a broken plate revealed by earthquakes

Several lines of earthquake evidence indicate that the lithospheric plate is broken under the load of the island of Hawai`i, where the geometry of the lithosphere is circular with a central depression. The plate bends concave downward surrounding a stress-free hole, rather than bending concave upward as with past assumptions. Earthquake focal mechanisms show that the center of load stress and the weak hole is between the summits of Mauna Loa and Mauna Kea where the load is greatest. The earthquake gap at 21 km depth coincides with the predicted neutral plane of flexure where horizontal stress changes sign. Focal mechanism P axes below the neutral plane display a striking radial pattern pointing to the stress center. Earthquakes above the neutral plane in the north part of the island have opposite stress patterns; T axes tend to be radial. The M 6.2 Honomu and M 6.7 Kiholo main shocks (both at 39 km depth) are below the neutral plane and show radial compression, and the M 6.0 Kiholo aftershock above the neutral plane has tangential compression. Earthquakes deeper than 20 km define a donut of seismicity around the stress center where flexural bending is a maximum. The hole is interpreted as the soft center where the lithospheric plate is broken. Kilauea's deep conduit is seismically active because it is in the ring of maximum bending. A simplified two-dimensional stress model for a bending slab with a load at one end yields stress orientations that agree with earthquake stress axes and radial P axes below the neutral plane. A previous inversion of deep Hawaiian focal mechanisms found a circular solution around the stress center that agrees with the model. For horizontal faults, the shear stress within the bending slab matches the slip in the deep Kilauea seismic zone and enhances outward slip of active flanks.

Hawaii↗

USGS2016

Automated tracking of lava lake level using thermal images at Kīlauea Volcano, Hawai’i

Tracking the level of the lava lake in Halema‘uma‘u Crater, at the summit of Kīlauea Volcano, Hawai’i, is an essential part of monitoring the ongoing eruption and forecasting potentially hazardous changes in activity. We describe a simple automated image processing routine that analyzes continuously-acquired thermal images of the lava lake and measures lava level. The method uses three image segmentation approaches, based on edge detection, short-term change analysis, and composite temperature thresholding, to identify and track the lake margin in the images. These relative measurements from the images are periodically calibrated with laser rangefinder measurements to produce real-time estimates of lake elevation. Continuous, automated tracking of the lava level has been an important tool used by the U.S. Geological Survey’s Hawaiian Volcano Observatory since 2012 in real-time operational monitoring of the volcano and its hazard potential.

Hawaii↗

USGS2016

The 2014-2015 Pāhoa lava flow crisis at Kīlauea Volcano, Hawai‘i: Disaster avoided and lessons learned

Lava flow crises are nothing new on the Island of Hawai‘i, where their destructive force has been demonstrated repeatedly over the past several hundred years. The 2014–2015 Pāhoa lava flow crisis, however, was unique in terms of its societal impact and volcanological characteristics. Despite low effusion rates, a long-lived lava flow whose extent reached 20 km (the longest at Kīlauea Volcano in the past several hundred years) was poised for months to impact thousands of people, although direct impacts were ultimately minor (thus far). Careful observation of the flow reaffirmed and expanded knowledge of the processes associated with pāhoehoe emplacement, including the direct correlation between summit pressurization and flow advance, the influence of existing geologic structures on flow pathways, and the possible relationship between effusion rate and flow length. Communicating uncertainty associated with lava flow hazards was a challenge throughout the crisis, but online distribution of information and direct contact with residents proved to be effective strategies for keeping the public informed and educated about flow progress and how lava flows work (including forecasting limitations). Volcanological and sociological lessons will be important for inevitable future lava flow crises in Hawai‘i and, potentially, elsewhere in the world.

Hawaii↗

USGS2016

Reconnaissance sediment budget for selected watersheds of West Maui, Hawai‘i

Episodic runoff brings suspended sediment to the nearshore waters of West Maui, Hawaiʻi. Even small rainfalls create visible plumes over a few hours. We used mapping, field experiments, and analysis of recent (July 19–20, 2014) and historic rainfall to estimate sources of land-based pollution for two watersheds in West Maui: Honolua, and Honokōwai. Former agricultural fields and some unimproved roads are plausible sources for polluted runoff, but have saturated hydraulic conductivities greater than the 10–15 millimeters per hour (mm/hr) rainfalls of July 2014. These fields and roads showed minor evidence for storm runoff, and could not have contributed substantially to July 2014 plume generation. Since 1978, rain at intensities capable of causing runoff from former agricultural fields sustained for 1–2 hours is also rare; such intensities have 2–5 year recurrence rates in the north, and greater than 25 year recurrence rates to the south near Lahaina. Streambanks now eroding into historic terraces of sands, silts, and clays are a more plausible source. Although past large storms contributed to sediment loading, annual plume generation is now caused by smaller rainfalls eroding these near-stream legacy deposits. Treatments of former agricultural fields, roads, and reserve forests are consequently not likely to measurably affect sediment pollution from smaller, more frequent storms. Increased runoff from the development of West Maui has the potential to exacerbate sediment plumes from such storms unless there is an effective strategy to reduce bank erosion. Uncertainties in the extent and erosion rate of historic terraces, however, limit our ability to plan mitigation.

Hawaii↗

USGS2016

Long-distance translocations to create a second millerbird population and reduce extinction risk

Translocation is a conservation tool used with increasing frequency to create additional populations of threatened species. In addition to following established general guidelines for translocations, detailed planning to account for unique circumstances and intensive post-release monitoring to document outcomes and guide management are essential components of these projects. Recent translocation of the critically endangered Nihoa millerbird ( Acrocephalus familiaris kingi ) provides an example of this planning and monitoring. The Nihoa millerbird is a passerine bird endemic to Nihoa Island in the remote Northwestern Hawaiian Islands. The closely related, ecologically similar Laysan millerbird ( Acrocephalus familiaris familiaris ) went extinct on Laysan Island in the early 20th century when the island was denuded by introduced rabbits. To reduce extinction risk, we translocated 50 adult Nihoa millerbirds more than 1000 km by sea to Laysan, which has recovered substantially in the past century and has ample habitat and a rich prey-base for millerbirds. Following five years of intensive background research and planning, including development of husbandry techniques, fundraising, and regulatory compliance, translocations occurred in 2011 and 2012. Of 11 females in each cohort, 8 (2011 cohort) and 11 (2012 cohort) produced at least one brood of fledglings during their first year on Laysan. At the conclusion of monitoring in September 2014, 37 of the translocated birds were known to survive, and the population was estimated at 164 birds. The reintroduction of millerbirds to Laysan represents a milestone in the island's ongoing restoration.

Hawaii↗

USGS2016

Ca, Sr and Ba stable isotopes reveal the fate of soil nutrients along a tropical climosequence

Nutrient biolifting is an important pedogenic process in which plant roots obtain inorganic nutrients such as phosphorus (P) and calcium (Ca) from minerals at depth and concentrate those nutrients at the surface. Here we use soil chemistry and stable isotopes of the alkaline earth elements Ca, strontium (Sr) and barium (Ba) to test the hypothesis that biolifting of P has been an important pedogenic process across a soil climosequence developed on volcanic deposits at Kohala Mountain, Hawaii. The geochemical linkage between these elements is revealed as generally positive site-specific relationships in soil mass gains and losses, particularly for P, Ba and Ca, using the ratio of immobile elements titanium and niobium (Ti/Nb) to link individual soil samples to a restricted compositional range of the chemically and isotopically diverse volcanic parent materials. At sites where P is enriched in surface soils relative to abundances in deeper soils, the isotope compositions of exchangeable Ca, Sr and Ba in the shallowest soil horizons (< 10 cm depth) are lighter than those of the volcanic parent materials and trend toward those of plants growing on fresh volcanic deposits. In contrast the isotope composition of exchangeable Ba in deeper soil horizons (> 10 cm depth) at those sites is consistently heavier than the volcanic parent materials. The isotope compositions of exchangeable Ca and Sr trend toward heavier compositions with depth more gradually, reflecting increasing leakiness from these soils in the order Ba < Sr < Ca and downward transfer of light biocycled Ca and Sr to deeper exchange sites. Given the long-term stability of ecosystem properties at the sites where P is enriched in surface soils, a simple box model demonstrates that persistence of isotopically light exchangeable Ca, Sr and Ba in the shallowest soil horizons requires that the uptake flux to plants from those near-surface layers is less than the recycling flux returned to the surface as litterfall. This observation implicates an uptake flux from an additional source which we attribute to biolifting. We view the heavy exchangeable Ba relative to soil parent values in deeper soils at sites where P is enriched in surface soils, and indeed at all but the wettest site across the climosequence, to represent the complement of an isotopically light Ba fraction removed from these soils by plant roots consistent with the biolifting hypothesis. We further suggest that decreasing heaviness of depth-integrated exchangeable Ba in deeper soils with increasing median annual precipitation across the climosequence reflects greater reliance on shallow nutrient sources as site water balance increases. While the Ca, Sr and Ba isotopes considered together were useful in confirming an important role for nutrient biolifting across the climosequence, the Ba isotopes provided the most robust tracer of biolifting and have the greatest potential to find application as an isotopic proxy for P dynamics in soils.

Hawaii↗

USGS2016

Observations of nearshore groundwater discharge: Kahekili Beach Park submarine springs, Maui, Hawaii

Study region The study region encompasses the nearshore, coastal waters off west Maui, Hawaii. Here abundant groundwater—that carries with it a strong land-based fingerprint—discharges into the coastal waters and over a coral reef. Study focus Coastal groundwater discharge is a ubiquitous hydrologic feature that has been shown to impact nearshore ecosystems and material budgets. A unique combined geochemical tracer and oceanographic time-series study addressed rates and oceanic forcings of submarine groundwater discharge at a submarine spring site off west Maui, Hawaii. New hydrological insights for the region Estimates of submarine groundwater discharge were derived for a primary vent site and surrounding coastal waters off west Maui, Hawaii using an excess 222 Rn ( t 1/2 = 3.8 d) mass balance model. Such estimates were complemented with a novel thoron ( 220 Rn, t 1/2 = 56 s) groundwater discharge tracer application, as well as oceanographic time series and thermal infrared imagery analyses. In combination, this suite of techniques provides new insight into the connectivity of the coastal aquifer with the near-shore ocean and examines the physical drivers of submarine groundwater discharge. Lastly, submarine groundwater discharge derived constituent concentrations were tabulated and compared to surrounding seawater concentrations. Such work has implications for the management of coastal aquifers and downstream nearshore ecosystems that respond to sustained constituent loadings via this submarine route.

Hawaii↗

USGS2016

Joint analysis of geodetic and earthquake fault-plane solution data to constrain magmatic sources: A case study from Kīlauea Volcano

A joint analysis of geodetic and seismic datasets from Kīlauea Volcano during a period of magmatic unrest in 2006 demonstrates the effectiveness of this combination for testing and constraining models of magma dynamics for a complex, multi-source system. At the end of 2003, Kīlauea's summit began a four-year-long period of inflation due to a surge in magma supply to the volcano. In 2006, for the first time since 1982, Kīlauea's Southwest Rift Zone (SWRZ) also experienced inflation. To investigate the characteristics of active magma sources and the nature of their interactions with faults in the SWRZ during 2006, we integrate, through Coulomb stress modeling, contemporary geodetic data from InSAR and GPS with a new catalogue of double-couple fault-plane solutions for volcano-tectonic earthquakes. We define two periods of inflation during 2006 based on the rate of deformation measured in daily GPS data, spanning February to 15 March 2006 (Period 1) and 16 March to 30 September 2006 (Period 2). InSAR data for these two periods are inverted to determine the position, change in size, and shape of inflation sources in each period. Our new models are consistent with microseismic activity from each period. They suggest that, during Period 1, deformation in the SWRZ can be explained by pressurization of magma in a spherical reservoir beneath the south caldera, and that, during Period 2, magma was also aseismically intruded farther to the southwest into the SWRZ along a sub-horizontal plane. Our Coulomb stress analysis shows that the microseismicity recorded in the SWRZ is induced by overpressurization of the south caldera reservoir, and not by magma intrusion into the SWRZ. This study highlights the importance of a joint analysis of independent geophysical datasets to fully constrain the nature of magma accumulation.

Hawaii↗

USGS2016

Magma transport and olivine crystallization depths in Kīlauea’s East Rift Zone inferred from experimentally rehomogenized melt inclusions

Concentrations of H 2 O and CO 2 in olivine-hosted melt inclusions can be used to estimate crystallization depths for the olivine host. However, the original dissolved CO 2 concentration of melt inclusions at the time of trapping can be difficult to measure directly because in many cases substantial CO 2 is transferred to shrinkage bubbles that form during post-entrapment cooling and crystallization. To investigate this problem, we heated olivine from the 1959 Kīlauea Iki and 1960 Kapoho (Hawai‘i) eruptions in a 1-atm furnace to temperatures above the melt inclusion trapping temperature to redissolve the CO 2 in shrinkage bubbles. The measured CO 2 concentrations of the experimentally rehomogenized inclusions (⩽590 ppm for Kīlauea Iki [n=10]; ⩽880 ppm for Kapoho, with one inclusion at 1863 ppm [n=38]) overlap with values for naturally quenched inclusions from the same samples, but experimentally rehomogenized inclusions have higher within-sample median CO 2 values than naturally quenched inclusions, indicating at least partial dissolution of CO 2 from the vapor bubble during heating. Comparison of our data with predictions from modeling of vapor bubble formation and published Raman data on the density of CO 2 in the vapor bubbles suggests that 55-85% of the dissolved CO 2 in the melt inclusions at the time of trapping was lost to post-entrapment shrinkage bubbles. Our results combined with the Raman data demonstrate that olivine from the early part of the Kīlauea Iki eruption crystallized at <6 km depth, with the majority of olivine in the 1-3 km depth range. These depths are consistent with the interpretation that the Kīlauea Iki magma was supplied from Kīlauea’s summit magma reservoir (&sim;2-5 km depth). In contrast, olivine from Kapoho, which was the rift zone extension of the Kīlauea Iki eruption, crystallized over a much wider range of depths (&sim;1-16 km). The wider depth range requires magma transport during the Kapoho eruption from deep beneath the summit region and/or from deep beneath Kīlauea’s east rift zone. The deeply derived olivine crystals and their host magma mixed with stored, more evolved magma in the rift zone, and the mixture was later erupted at Kapoho.

Hawaii↗

USGS2016

Isotopic constraints on the genesis and evolution of basanitic lavas at Haleakala, Island of Maui, Hawaii

To understand the dynamics of solid mantle upwelling and melting in the Hawaiian plume, we present new major and trace element data, Nd, Sr, Hf, and Pb isotopic compositions, and 238 U– 230 Th– 226 Ra and 235 U– 231 Pa– 227 Ac activities for 13 Haleakala Crater nepheline normative basanites with ages ranging from ∼900 to 4100 yr B.P. These basanites of the Hana Volcanics exhibit an enrichment in incompatible trace elements and a more depleted isotopic signature than similarly aged Hawaiian shield lavas from Kilauea and Mauna Loa. Here we posit that as the Pacific lithosphere beneath the active shield volcanoes moves away from the center of the Hawaiian plume, increased incorporation of an intrinsic depleted component with relatively low 206 Pb/ 204 Pb produces the source of the basanites of the Hana Volcanics. Haleakala Crater basanites have average ( 230 Th/ 238 U) of 1.23 ( n = 13), average age-corrected ( 226 Ra/ 230 Th) of 1.25 ( n = 13), and average ( 231 Pa/ 235 U) of 1.67 ( n = 4), significantly higher than Kilauea and Mauna Loa tholeiites. U-series modeling shows that solid mantle upwelling velocity for Haleakala Crater basanites ranges from ∼0.7 to 1.0 cm/yr, compared to ∼10 to 20 cm/yr for tholeiites and ∼1 to 2 cm/yr for alkali basalts. These modeling results indicate that solid mantle upwelling rates and porosity of the melting zone are lower for Hana Volcanics basanites than for shield-stage tholeiites from Kilauea and Mauna Loa and alkali basalts from Hualalai. The melting rate, which is directly proportional to both the solid mantle upwelling rate and the degree of melting, is therefore greatest in the center of the Hawaiian plume and lower on its periphery. Our results indicate that solid mantle upwelling velocity is at least 10 times higher at the center of the plume than at its periphery under Haleakala.

Hawaii↗

USGS2016

Quantification of the intrusion process at Kīlauea volcano, Hawai'i

The characteristic size of two types of intrusions identified beneath Kīlauea's East Rift zone are uniquely estimated by combining time constraints from fractional crystallization and the rates of magma solidification during cooling. Some intrusions were rapidly emplaced as dikes, but stalled before reaching the surface, and cooled and crystallized to feed later fractionated eruptions. More specifically, using the observed time interval between initial emplacement and eruption of fractionated lava, whose degree of fractionation is estimated from petrologic mixing calculations, the extent of solidification or cooling needed to produce this amount of fractionation can be directly inferred. And from the known erupted volumes the spatial extent or size of this fractionated volume can be analytically related to the full size of the source body itself. Two examples yield dike widths of 82 and 68 m. Other intrusions remain close to the east rift magma transport path and are observed to last for decades or longer as viable magma bodies that may participate in feeding later eruptions. The thickness of semi-permanent reservoirs near the East Rift Zone magma transport path can be estimated by assuming a resupply rate that is sufficiently frequent to restrict cooling to < 10 °C. It is inferred that both types of intrusions likely began as dike offshoots from the East Rift Zone magma transport path, but the frequently resupplied bodies may have later been converted to sills or laccoliths of heights estimated at 43–62 m. Our modeled intrusions contrast with models of rapidly emplaced thinner dikes feeding shallow intrusions, which are accompanied by intense rift earthquake swarms and are often associated with eruptions. These calculations show that long-term heating of the wallrock of the magma transport paths serves to slow conduit cooling, which may be partly responsible for sustaining long East Rift Zone eruptions. Adjacent to the vertical transport path beneath Kīlauea's summit, the combined effects of heating and ever-increasing magma supply rate may have forced a commensurate enlarging of the conduit, perhaps explaining the occurrence of a temporary burst of deep (5–15 km) long-period earthquake swarms between 1987 and 1992.

Hawaii↗