Geology topics

Research about Evansville, Indiana

Source-linked reports with geographic coverage including Evansville, Indiana.

7 recordsLinked to original sources

USGS2012

Understanding earthquake hazards in urban areas - Evansville Area Earthquake Hazards Mapping Project

The region surrounding Evansville, Indiana, has experienced minor damage from earthquakes several times in the past 200 years. Because of this history and the proximity of Evansville to the Wabash Valley and New Madrid seismic zones, there is concern among nearby communities about hazards from earthquakes. Earthquakes currently cannot be predicted, but scientists can estimate how strongly the ground is likely to shake as a result of an earthquake and are able to design structures to withstand this estimated ground shaking. Earthquake-hazard maps provide one way of conveying such information and can help the region of Evansville prepare for future earthquakes and reduce earthquake-caused loss of life and financial and structural loss. The Evansville Area Earthquake Hazards Mapping Project (EAEHMP) has produced three types of hazard maps for the Evansville area: (1) probabilistic seismic-hazard maps show the ground motion that is expected to be exceeded with a given probability within a given period of time; (2) scenario ground-shaking maps show the expected shaking from two specific scenario earthquakes; (3) liquefaction-potential maps show how likely the strong ground shaking from the scenario earthquakes is to produce liquefaction. These maps complement the U.S. Geological Survey's National Seismic Hazard Maps but are more detailed regionally and take into account surficial geology, soil thickness, and soil stiffness; these elements greatly affect ground shaking.

Indiana↗

USGS2012

Modified Mercalli Intensity for scenario earthquakes in Evansville, Indiana

Evansville, Indiana, has experienced minor damage from earthquakes several times in the past 200 years. Because of this history and the fact that Evansville is close to the Wabash Valley and New Madrid seismic zones, there is concern about the hazards from earthquakes. Earthquakes currently cannot be predicted, but scientists can estimate how strongly the ground is likely to shake as a result of an earthquake. Earthquake-hazard maps provide one way of conveying such estimates of strong ground shaking and will help the region prepare for future earthquakes and reduce earthquake-caused losses.

Indiana↗

USGS2012

Publication: Evansville hazard maps

The Evansville (Indiana) Area Earthquake Hazards Mapping Project was completed in February 2012. It was a collaborative effort among the U.S. Geological Survey and regional partners Purdue University; the Center for Earthquake Research and Information at the University of Memphis; the state geologic surveys of Kentucky, Illinois, and Indiana; the Southwest Indiana Disaster Resistant Community Corporation; and the Central U.S. Earthquake Consortium state geologists.

Indiana↗

USGS2011

Liquefaction hazard for the region of Evansville, Indiana

We calculated liquefaction potential index for a grid of sites in the Evansville, Indiana area for two scenario earthquakes-a magnitude 7.7 in the New Madrid seismic zone and a M6.8 in the Wabash Valley seismic zone. For the latter event, peak ground accelerations range from 0.13 gravity to 0.81 gravity, sufficiently high to be of concern for liquefaction. Recently acquired cone-penetrometer test data at 58 sites were used to estimate the factor of safety against liquefaction and liquefaction potential index at each site. To extend the estimation of liquefaction hazard to a grid of sites in the area, the soil columns at these grid sites were divided into three categories, and for each category a sufficient number of cone-penetrometer test sites were available to characterize statistically each group's cone-penetrometer test tip resistance and sleeve friction. At each grid site, Monte Carlo sampling was used to generate values for these two parameters at 2-meter intervals for depths down to 20 meters or bedrock. The groundwater table at each grid site was likewise sampled from a mean value and group-dependent standard deviation. For each grid site, 25,000 realizations of the soil profile were generated and a probability distribution of liquefaction potential index values was obtained. Maps of liquefaction hazard for each scenario earthquake present (1) Mean liquefaction potential index at each site, and (2) Probabilities that liquefaction potential index values exceed 5 (threshold for expression of surface liquefaction) and 12 (threshold for lateral spreading). Values for the liquefaction potential index are high in the River alluvium group, where the soil profiles are predominantly sand, while values in the Lacustrine terrace group are lower, owing to the predominance of clay. Liquefaction potential index values in the Outwash terrace group are less consistent because the soil profiles contain highly variable sequences of silty sand, clayey sand, and sandy clay, justifying the use of the Monte Carlo procedure to capture the consequences of this complexity.

Evansville, Indiana↗

USGS2011

Earthquake scenario ground motions for the urban area of Evansville, Indiana

The Wabash Valley seismic zone and the New Madrid seismic zone are the closest large earthquake source zones to Evansville, Indiana. The New Madrid earthquakes of 1811-1812, over 180 kilometers (km) from Evansville, produced ground motions with a Modified Mercalli Intensity of VII near Evansville, the highest intensity observed in Indiana. Liquefaction evidence has been documented less than 40 km away from Evansville resulting from two large earthquakes in the past 12,000 years in the Wabash Valley. Two earthquake scenarios are described in this paper that demonstrate the expected ground motions for a 33×42-km region around Evansville based on a repeat earthquake from each of these source regions. We perform a one-dimensional analysis for a grid of sites that takes into account the amplification or deamplification of ground motion in the unconsolidated soil layer using a new three-dimensional model of seismic velocity and bedrock depth. There are significant differences in the calculated amplification from that expected for National Earthquake Hazard Reduction Program site class D conditions, with deamplification at many locations within the ancient bedrock valley underlying Evansville. Ground motions relative to the acceleration of gravity (g) in the Evansville area from a simulation of a magnitude (M) 7.7 New Madrid earthquake range from 0.15 to 0.25 g for peak ground acceleration, 0.14 to 0.7 g for 0.2-second (s) spectral acceleration, and 0.05 to 0.25 g for 1.0-s spectral acceleration. Ground motions from a M6.8 Wabash Valley earthquake centered 40 km northwest of the city produce ground motions that decrease with distance from 1.5 to 0.3 g for 0.2-s spectral acceleration when they reach the main part of Evansville, but then increase in amplitude from 0.3 to 0.6 g south of the city and the Ohio River. The densest urbanization in Evansville and Henderson, Ky., is within the area of preferential amplification at 1.0-s period for both scenarios, but the area experiences relatively less amplification than surrounding areas at 0.2 s, consistent with expected resonance periods based on the soil profiles.

Indiana↗

USGS1997

Spatial earthquake hazard assessment of Evansville, Indiana

The earthquake hazard has been evaluated for a 150-square-kilometer area around Evansville, Indiana. GIS-QUAKE, a system that combines liquefaction and ground motion analysis routines with site-specific geological, geotechnical, and seismological information, was used for the analysis. The hazard potential was determined by using 586 SPT borings, 27 CPT sounding, 39 shear-wave velocity profiles and synthesized acceleration records for body-wave magnitude 6.5 and 7.3 mid-continental earthquakes, occurring at distances of 50 km and 250 km, respectively. The results of the GIS-QUAKE hazard analyses for Evansville identify areas with a high hazard potential that had not previously been identified in earthquake zonation studies. The Pigeon Creek area specifically is identified as having significant potential for liquefaction-induced damage. Damage as a result of ground motion amplification is determined to be a moderate concern throughout the area. Differences in the findings of this zonation study and previous work are attributed to the size and range of the database, the hazard evaluation methodologies, and the geostatistical interpolation techniques used to estimate the hazard potential. Further, assumptions regarding the groundwater elevations made in previous studies are also considered to have had a significant effect on the results.

Indiana↗

USGS1951

Report on a pumping test at Evansville, Indiana

The City of Evansville, Ind. has utilized the Ohio River as a source of municipal water supply for many years. The average daily pumpage for the city in 1950 was reported to be about 18.5 million gallons. Because of the extreme variability in the quality of the river water and the extensive treatment necessary, the city considered the possibility of developing a ground-water supply to supplement its present surface-water supply. In February, 1951 Mr. Oliver N. Summers, General Superintendent, Evansville Waterworks Department, in a letter to C.K. Behert, Director, Division of Water Resources, Indiana Department of Conservation, requested the assistance of the Department of Conservation and the United States Geological Survey in conducting a pumping test to determine the hydraulic characteristics of the water-bearing formations in the area. In view of the importance of Evansville as an industrial center and realizing the need for quantitative information in such an area, it was decided that the test should be a part of the statewide investigation of the ground-water resources now being made by the U.S. Geological Survey in cooperation with the Indiana Department of Conservation. This memorandum describes the procedure used in making the test and the results obtained from the test.

Indiana↗