Geology topics

Research about Bonners Ferry, Idaho

Source-linked reports with geographic coverage including Bonners Ferry, Idaho.

4 recordsLinked to original sources

USGS2021

Kootenai River white sturgeon (Acipenser transmontanus) fine-scale habitat selection and preference, Kootenai River near Bonners Ferry, Idaho, 2017

To quantify fine-scale Kootenai River white sturgeon ( Acipenser transmontanus ) staging and spawning habitat selection and preference within a recently restored reach of the Kootenai River, the U.S. Geological Survey, in cooperation with the U.S. Fish and Wildlife Service, integrated acoustic telemetry data with two-dimensional hydraulic model simulations within a 1.5-kilometer reach of the Kootenai River near Bonners Ferry, northern Idaho. Twenty-seven individual Kootenai River white sturgeon were detected in the study reach during May 6–June 30, 2017. The largest concentration of fish positions occurred near the edge of the gravel bar adjacent to the right bank pool-forming structure and additional concentrations of fish positions occurred near two recently constructed rock substrate clusters. The difference in preferred and available depth distributions quantifies that Kootenai River white sturgeon generally preferred depths of 7–11.5 meters, deeper than the most frequently available depths. About 71 percent of the detections occurred within the lower one-third of the water column, placing Kootenai River white sturgeon at or near the channel bed. The difference in available and preferred water velocities indicated that Kootenai River white sturgeon generally preferred a wide range of velocities from 0.0 to 1.0 meters per second, and generally preferred velocities that were less than the most frequently occurring available velocities. Kootenai River white sturgeon generally preferred the downstream part of the study area where water velocities were less than those in the upstream part. This study concludes that Kootenai River white sturgeon generally avoided shallow areas with increased velocities and generally favored deep areas with lower velocities near recently constructed restoration structures.

Idaho↗

USGS2017

Modeling hydraulic and sediment transport processes in white sturgeon spawning habitat on the Kootenai River, Idaho

The Kootenai River white sturgeon currently spawn (2005) in an 18-kilometer reach of the Kootenai River, Idaho. Since completion of Libby Dam upstream from the spawning reach, there has been only one successful year of recruitment of juvenile fish. Where successful in other rivers, white sturgeon spawn over clean coarse material of gravel size or larger. The channel substrate in the current spawning reach is composed primarily of sand and some buried gravel; within a few kilometers upstream there is clean gravel. We used a 2-dimensional flow and sediment-transport model and the measured locations of sturgeon spawning from 1994-2002 to gain insight into the paradox between the current spawning location and the absence of suitable substrate. Spatial correlations between spawning locations and the model simulations of velocity and depth indicate the white sturgeon tend to select regions of highest velocity and depth within any river cross-section to spawn. These regions of high velocity and depth are independent of pre- or post-dam flow conditions. A simple sediment-transport simulation suggests that high discharge and relatively long duration flow associated with pre-dam flow events might be sufficient to scour the sandy substrate and expose existing lenses of gravel and cobble as lag deposits in the current spawning reach.

Idaho↗

USGS2015

Sediment transport and evaluation of sediment surrogate ratings in the Kootenai River near Bonners Ferry, Idaho, Water Years 2011–14

The Kootenai River white sturgeon ( Acipenser transmontanus ) and other native fish species are culturally important to the Kootenai Tribe of Idaho, but their habitat and recruitment have been affected by anthropogenic changes to the river. Although the interconnections among anthropogenic changes and their impacts on fish are complex, the Kootenai Tribe of Idaho, in cooperation with other agencies, has been trying to understand and promote native fish recruitment through the development and implementation of the Kootenai River Habitat Restoration Program. As part of this effort, the U.S. Geological Survey collected sediment and streamflow information and evaluated use of acoustic backscatter as a sediment surrogate for estimating continuous suspended-sediment concentration at three sites in the Kootenai River white sturgeon critical habitat during water years 2011–14. During the study, total suspended-sediment and fines concentrations were driven primarily by contributions from tributaries flowing into the Kootenai River between Libby Dam and the study area and were highest during rain-on-snow events in those tributary watersheds. On average, the relative percentage of suspended-sediment concentration in equal-width-increment samples collected in water years 2011–14 composed of fines less than 0.0625 mm (called washload) was 73, 71, and 70 percent at the Below Moyie, Crossport, and Tribal Hatchery sites, respectively. Suspended sand transport often increased with high streamflows, typically but not always associated with releases from Libby Dam. Bedload measured at the Crossport site was about 5 percent, on average, of the total sediment load measured in samples collected in water years 2011–13 and was positively correlated with suspended-sediment load. Comparisons with regional regression and envelope lines for suspended-sediment and bedload transport in relation to unregulated drainage area (drainage area downstream of Libby Dam) show that sediment transport was substantially less in the Kootenai River than in selected, minimally regulated Rocky Mountain rivers. Acoustic surrogate ratings were developed between backscatter data collected using acoustic Doppler velocity meters (ADVMs) and results of suspended-sediment samples. Ratings were successfully fit to various sediment size classes (total, fines, and sands) using ADVMs of different frequencies (1.5 and 3 megahertz). Surrogate ratings also were developed using variations of streamflow and seasonal explanatory variables. The streamflow surrogate ratings produced average annual sediment load estimates that were 8–32 percent higher, depending on site and sediment type, than estimates produced using the acoustic surrogate ratings. The streamflow surrogate ratings tended to overestimate suspended-sediment concentrations and loads during periods of elevated releases from Libby Dam as well as on the falling limb of the streamflow hydrograph. Estimates from the acoustic surrogate ratings more closely matched suspended-sediment sample results than did estimates from the streamflow surrogate ratings during these periods as well as for rating validation samples collected in water year 2014. Acoustic surrogate technologies are an effective means to obtain continuous, accurate estimates of suspended-sediment concentrations and loads for general monitoring and sediment-transport modeling. In the Kootenai River, continued operation of the acoustic surrogate sites and use of the acoustic surrogate ratings to calculate continuous suspended-sediment concentrations and loads will allow for tracking changes in sediment transport over time.

Idaho↗

USGS2009

Simulation of streamflow using a multidimensional flow model for white sturgeon habitat, Kootenai River near Bonners Ferry, Idaho – Supplement to Scientific Investigations Report 2005-5230

During 2005, the U.S. Geological Survey (USGS) developed, calibrated, and validated a multidimensional flow model for simulating streamflow in the white sturgeon spawning habitat of the Kootenai River in Idaho. The model was developed as a tool to aid understanding of the physical factors affecting quality and quantity of spawning and rearing habitat used by the endangered white sturgeon (Acipenser transmontanus) and for assessing the feasibility of various habitat-enhancement scenarios to re-establish recruitment of white sturgeon. At the request of the Kootenai Tribe of Idaho, the USGS extended the two-dimensional flow model developed in 2005 into a braided reach upstream of the current white sturgeon spawning reach. Many scientists consider the braided reach a suitable substrate with adequate streamflow velocities for re-establishing recruitment of white sturgeon. The 2005 model was extended upstream to help assess the feasibility of various strategies to encourage white sturgeon to spawn in the reach. At the request of the Idaho Department of Fish and Game, the USGS also extended the two-dimensional flow model several kilometers downstream of the white sturgeon spawning reach. This modified model can quantify the physical characteristics of a reach that white sturgeon pass through as they swim upstream from Kootenay Lake to the spawning reach. The USGS Multi-Dimensional Surface-Water Modeling System was used for the 2005 modeling effort and for this subsequent modeling effort. This report describes the model applications and limitations, presents the results of a few simple simulations, and demonstrates how the model can be used to link physical characteristics of streamflow to the location of white sturgeon spawning events during 1994-2001. Model simulations also were used to report on the length and percentage of longitudinal profiles that met the minimum criteria during May and June 2006 and 2007 as stipulated in the U.S. Fish and Wildlife Biological Opinion.

Idaho↗