Geology topics

Research about Assateague Island

Source-linked reports with geographic coverage including Assateague Island.

12 recordsLinked to original sources

USGS2021

Simulated effects of sea-level rise on the shallow, fresh groundwater system of Assateague Island, Maryland and Virginia

The U.S. Geological Survey, in cooperation with the National Park Service, developed a three-dimensional groundwater-flow model for Assateague Island in eastern Maryland and Virginia to assess the effects of sea-level rise on the groundwater system. Sea-level rise is expected to increase the altitude of the water table in barrier island aquifer systems, possibly leading to adverse effects to ecosystems on the barrier islands. The potential effects of sea-level rise were evaluated by simulating groundwater conditions under sea-level-rise scenarios of 20 centimeters (cm), 40 cm, and 60 cm. Results show that as sea level rises, low-lying areas of the island originally represented as receiving freshwater recharge in the baseline scenario are inundated by saltwater. This change from freshwater recharge to saltwater decreases the overall amount of freshwater recharging the system. As the water table rises in response to the higher sea levels, freshwater flow out of the system changes, with more freshwater leaving as submarine groundwater discharge and less freshwater leaving as seeps and evapotranspiration. At the current land-surface altitude, as much as 50 percent of the island may be inundated with a 60-cm rise in sea level, and the low-lying marshes may change from freshwater to saltwater. Groundwater levels at 32 wells were monitored for as long as 12 months between October 2014 and September 2015 on Assateague Island. Results from objective classification analysis of 14 shallow monitoring wells show two dominant processes affecting groundwater levels in two different settings on the island. On the western side of the island, between the primary dune and the inland bays, water levels clearly respond to precipitation events. This side of the island is more protected from ocean tides and typically is more vegetated than the eastern side. On the eastern side of the island, between the Atlantic Ocean and the primary dune, water levels clearly respond to tidal events. Specific conductance was measured at four wells, two on the western part of the island and two on the eastern part of the island. Specific conductance values in the two wells west of the primary dune show episodic decreases, coinciding with precipitation events. Specific conductance values in the two wells on the eastern side of the primary dune show episodic increases, coinciding with high-tide events. These high frequency monitoring data are intended to aid in designing a monitoring network that can document both short-term and long-term hydrologic processes on Assateague Island National Seashore. This study uses a modeling approach consistent with models developed for Gateway National Recreation Area, Sandy Hook Unit (New Jersey) and Fire Island National Seashore (New York). Combined, these models are meant to improve the regional capabilities for predicting climate-change effects on barrier islands and provide resource managers with a common set of tools for adaptation and mitigation of potentially adverse effects of sea-level rise.

Maryland, Virginia↗

USGS2017

Sand ridge morphology and bedform migration patterns derived from bathymetry and backscatter on the inner-continental shelf offshore of Assateague Island, USA

The U.S. Geological Survey and the National Oceanographic and Atmospheric Administration conducted geophysical and hydrographic surveys, respectively, along the inner-continental shelf of Fenwick and Assateague Islands, Maryland and Virginia over the last 40 years. High resolution bathymetry and backscatter data derived from surveys over the last decade are used to describe the morphology and presence of sand ridges on the inner-continental shelf and measure the change in the position of smaller-scale (10–100 s of meters) seafloor features. Bathymetric surveys from the last 30 years link decadal-scale sand ridge migration patterns to the high-resolution measurements of smaller-scale bedform features. Sand ridge morphology on the inner-shelf changes across-shore and alongshore. Areas of similar sand ridge morphology are separated alongshore by zones where ridges are less pronounced or completely transected by transverse dunes. Seafloor-change analyses derived from backscatter data over a 4–7 year period show that southerly dune migration increases in magnitude from north to south, and the east-west pattern of bedform migration changes ~ 10 km north of the Maryland-Virginia state line. Sand ridge morphology and occurrence and bedform migration changes may be connected to observed changes in geologic framework including topographic highs, deflated zones, and sand availability. Additionally, changes in sand ridge occurrence and morphology may help explain changes in the long-term shoreline trends along Fenwick and Assateague Islands. Although the data presented here cannot quantitatively link sand ridges to sediment transport and shoreline change, it does present a compelling relationship between inner-shelf sand availability and movement, sand ridge occurrence and morphology, geologic framework, and shoreline behavior.

Assateague Island↗

USGS2016

Raw and processed ground-penetrating radar and postprocessed differential global positioning system data collected from Assateague Island, Maryland, October 2014

Scientists from the U.S. Geological Survey, St. Petersburg Coastal and Marine Science Center acquired sediment cores, sediment surface grab samples, ground-penetrating radar (GPR) and Differential Global Positioning System (DGPS) data from Assateague Island, Maryland, in October 2014. The objectives were to identify washover deposits in the stratigraphic record to aid in understanding barrier island evolution. This report serves as an archive of GPR and DGPS data collected from Assateague Island in October 2014. Data products, including raw GPR and processed DGPS data, elevation corrected GPR profiles, and accompanying Federal Geographic Data Committee metadata can be downloaded from the Data Downloads page.

Maryland↗

USGS2016

Sedimentologic characteristics of recent washover deposits from Assateague Island, Maryland

The U.S. Geological Survey has a long history of responding to and documenting the impacts of storms along the Nation’s coasts and incorporating these data into storm impact and coastal change vulnerability assessments. Although physical changes caused by tropical and extratropical storms to the sandy beaches and dunes fronting barrier islands are generally well documented, the interaction between sandy shoreline erosion and overwash with the back-barrier wetland and estuarine environments is poorly constrained. The goal of the Barrier Island and Estuarine Wetland Physical Change Assessment project is to integrate a wetland-change assessment with existing coastal-change assessments for the adjacent sandy dunes and beaches, initially focusing on Assateague Island along the Maryland and Virginia coastline. Assateague Island was impacted by waves and storm surge associated with the passage of Hurricane Sandy in October 2012, causing erosion and overwash along the ocean-facing sandy shoreline as well as erosion and overwash deposition in the back-barrier and estuarine bay environments. This report describes sediment data collected using sand augers in active overwash zones on Assateague Island in Maryland. Samples were collected by the U.S. Geological Survey (USGS) during two surveys in March/April and October 2014 (USGS Field Activity Numbers [FAN] 2014-301-FA and 2014-322-FA, respectively). The physical characteristics (for example, sediment texture or bedding structure) of and spatial differences among these deposits will provide information about overwash processes and sediment transport from the sandy barrier-island reaches to the back-barrier environments. Metrics derived from these data, such as mean grain size or deposit thicknesses, can be used to ground-truth remote sensing and geophysical data and can also be incorporated into sediment transport models. Data products, including sample location tables, descriptive core logs, core photographs and x-radiographs, the results of sediment grain-size analyses, and Geographic Information System (GIS) data files with accompanying formal Federal Geographic Data Committee (FGDC) metadata can be downloaded from the Data Downloads page.

Maryland↗

USGS2015

Using a Bayesian network to predict barrier island geomorphologic characteristics

Quantifying geomorphic variability of coastal environments is important for understanding and describing the vulnerability of coastal topography, infrastructure, and ecosystems to future storms and sea level rise. Here we use a Bayesian network (BN) to test the importance of multiple interactions between barrier island geomorphic variables. This approach models complex interactions and handles uncertainty, which is intrinsic to future sea level rise, storminess, or anthropogenic processes (e.g., beach nourishment and other forms of coastal management). The BN was developed and tested at Assateague Island, Maryland/Virginia, USA, a barrier island with sufficient geomorphic and temporal variability to evaluate our approach. We tested the ability to predict dune height, beach width, and beach height variables using inputs that included longer-term, larger-scale, or external variables (historical shoreline change rates, distances to inlets, barrier width, mean barrier elevation, and anthropogenic modification). Data sets from three different years spanning nearly a decade sampled substantial temporal variability and serve as a proxy for analysis of future conditions. We show that distinct geomorphic conditions are associated with different long-term shoreline change rates and that the most skillful predictions of dune height, beach width, and beach height depend on including multiple input variables simultaneously. The predictive relationships are robust to variations in the amount of input data and to variations in model complexity. The resulting model can be used to evaluate scenarios related to coastal management plans and/or future scenarios where shoreline change rates may differ from those observed historically.

Maryland and Virginia↗

USGS2015

Sedimentological and radiochemical characteristics of marsh deposits from Assateague Island and the adjacent vicinity, Maryland and Virginia, following Hurricane Sandy

The effect of tropical and extratropical cyclones on coastal wetlands and marshes is highly variable and depends on a number of climatic, geologic, and physical variables. The impacts of storms can be either positive or negative with respect to the wetland and marsh ecosystems. Small to moderate amounts of inorganic sediment added to the marsh surface during storms or other events help to abate pressure from sea-level rise. However, if the volume of sediment is large and the resulting deposits are thick, the organic substrate may compact causing submergence and a loss in elevation. Similarly, thick deposits of coarse inorganic sediment may also alter the hydrology of the site and impede vegetative processes. Alternative impacts associated with storms include shoreline erosion at the marsh edge as well as potential emergence. Evaluating the outcome of these various responses and potential long-term implications is possible from a systematic assessment of both historical and recent event deposits. A study was conducted by the U.S. Geological Survey to assess the sedimentological and radiochemical characteristics of marsh deposits from Assateague Island and areas around Chincoteague Bay, Maryland and Virginia, following Hurricane Sandy in 2012. The objectives of this study were to (1) characterize the surficial sediment of the relict to recent washover fans and back-barrier marshes in the study area, and (2) characterize the sediment of six marsh cores from the back-barrier marshes and a single marsh island core near the mainland. These geologic data will be integrated with other remote sensing data collected along Assateague Island in Maryland and Virginia and assimilated into an assessment of coastal wetland response to storms. This report serves as an archive for sedimentological and radiochemical data derived from the surface sediments and marsh cores collected March 26–April 4, 2014. Select surficial data are available for the additional sampling periods October 21–30, 2014. Downloadable data are available as Excel spreadsheets and as JPEG files. Additional files include: Field documentation, x-radiographs, photographs, detailed results of sediment grain size analyses, and formal Federal Geographic Data Committee metadata ( data downloads ).

Maryland, Virginia↗

USGS2015

Back-island and open-ocean shorelines, and sand areas of Assateague Island, Maryland and Virginia, April 12, 1989, to September 5, 2013

Assessing the physical change to shorelines and wetlands is critical in determining the resiliency of wetland systems that protect adjacent habitat and communities. The wetland and back-barrier shorelines of Assateague Island, located in Maryland and Virginia, changed as a result of wave action and storm surge that occurred during Hurricane Sandy in 2012. As part of the U.S. Geological Survey Coastal and Marine Geology Program, the impact of Hurricane Sandy will be assessed and placed in its historical context to understand the future vulnerability of wetland systems. Making these assessments will rely on data extracted from current and historical resources such as maps, aerial photographs, satellite imagery, and lidar elevation data, which document physical changes over time. This Data Series Report includes several open-ocean shorelines, back-island shorelines, back-island shoreline points, sand area polygons, and sand lines for Assateague Island that were extracted from natural-color orthoimagery (aerial photography) dated from April 12, 1989, to September 5, 2013. The images used were 0.3–2-meter (m)-resolution U.S. Geological Survey Digital Orthophoto Quarter Quads (DOQQ), U.S. Department of Agriculture National Agriculture Imagery Program (NAIP) images, and Virginia Geographic Information Network Virginia Base Map Program (VBMP) images courtesy of the Commonwealth of Virginia. The back-island shorelines were hand-digitized at the intersect of the apparent back-island shoreline and transects spaced at 20-m intervals. The open-ocean shorelines were hand-digitized at the approximate still water level, such as tide level, which was fit through the average position of waves and swash apparent on the beach. Hand-digitizing was done at a scale of approximately 1:2,000. The sand polygons were derived by using an image-processing unsupervised classification technique that separates images into classes. The classes were then visually categorized as either sand or not sand. Also included in this report are 20-m-spaced transect lines and the transect base lines.

Maryland, Virginia↗

USGS2013

Effects of sea-level rise on barrier island groundwater system dynamics: ecohydrological implications

We used a numerical model to investigate how a barrier island groundwater system responds to increases of up to 60 cm in sea level. We found that a sea-level rise of 20 cm leads to substantial changes in the depth of the water table and the extent and depth of saltwater intrusion, which are key determinants in the establishment, distribution and succession of vegetation assemblages and habitat suitability in barrier islands ecosystems. In our simulations, increases in water-table height in areas with a shallow depth to water (or thin vadose zone) resulted in extensive groundwater inundation of land surface and a thinning of the underlying freshwater lens. We demonstrated the interdependence of the groundwater response to island morphology by evaluating changes at three sites. This interdependence can have a profound effect on ecosystem composition in these fragile coastal landscapes under long-term changing climatic conditions.

Maryl;Virginia↗

USGS2013

Development of a numerical model to simulate groundwater flow in the shallow aquifer system of Assateague Island, Maryland and Virginia

A three-dimensional groundwater-flow model was developed for Assateague Island in eastern Maryland and Virginia to simulate both groundwater flow and solute (salt) transport to evaluate the groundwater system response to sea-level rise. The model was constructed using geologic and spatial information to represent the island geometry, boundaries, and physical properties and was calibrated using an inverse modeling parameter-estimation technique. An initial transient solute-transport simulation was used to establish the freshwater-saltwater boundary for a final calibrated steady-state model of groundwater flow. This model was developed as part of an ongoing investigation by the U.S. Geological Survey Climate and Land Use Change Research and Development Program to improve capabilities for predicting potential climate-change effects and provide the necessary tools for adaptation and mitigation of potentially adverse impacts.

Open-File Report↗

USGS2007

Geomorphology and depositional sub-environments of Assateague Island MD/VA

The U.S. Geological Survey is studying coastal hazards and coastal change to improve our understanding of coastal ecosystems and to develop better capabilities of predicting future coastal change. One approach to understanding the dynamics of coastal systems is to monitor changes in barrier-island sub-environments through time. This involves examining morphological and topographic change at time scales ranging from millennia to years and space scales ranging from tens of kilometers to meters. Of particular interest are the processes that produce those changes and determining whether or not those processes are likely to persist into the future. In these analyses of hazards and change, both natural and anthropogenic influences are considered. Quantifying past magnitudes and rates of coastal change and knowing the principal factors that govern those changes are critical to predicting what changes are likely to occur under different scenarios, such as short-term impacts of extreme storms or long-term impacts of sea-level rise. Assateague Island MD/VA was selected for detailed mapping of barrier island morphology and topography because the island offers a diversity of depositional sub-environments that are representative of other barrier islands along the middle Atlantic coast. The geomorphology and sub-environment map emphasizes the origins of the surficial features and it also serves as a basis for documenting which sub-environments are relatively stable, such as the barrier island core, and those that are highly dynamic, such as the beach and active overwash zones.

Maryland, Virginia↗

USGS2004

Barrier island morphodynamic classification based on lidar metrics for north Assateague Island, Maryland

In order to reap the potential of airborne lidar surveys to provide geological information useful in understanding coastal sedimentary processes acting on various time scales, a new set of analysis methods are needed. This paper presents a multi-temporal lidar analysis of north Assateague Island, Maryland, and demonstrates the calculation of lidar metrics that condense barrier island morphology and morphological change into attributed linear features that may be used to analyze trends in coastal evolution. The new methods proposed in this paper are also of significant practical value, because lidar metric analysis reduces large volumes of point elevations into linear features attributed with essential morphological variables that are ideally suited for inclusion in Geographic Information Systems. A morphodynamic classification of north Assategue Island for a recent 10 month time period that is based on the recognition of simple patterns described by lidar change metrics is presented. Such morphodynamic classification reveals the relative magnitude and the fine scale alongshore variation in the importance of coastal changes over the study area during a defined time period. More generally, through the presentation of this morphodynamic classification of north Assateague Island, the value of lidar metrics in both examining large lidar data sets for coherent trends and in building hypotheses regarding processes driving barrier evolution is demonstrated

Maryland↗

USGS2000

Airborne laser mapping of Assateague National Seashore Beach

Results are presented from topographic surveys of the Assateague Island National Seashore using an airborne scanning laser altimeter and kinematic Global Positioning System (GPS) technology. The instrument used was the Airborne Topographic Mapper (ATM), developed by the NASA Arctic Ice Mapping (AIM) group from the Goddard Space Flight Center's Wallops Flight Facility. In November, 1995, and again in May, 1996, these topographic surveys were flown as a functionality check prior to conducting missions to measure the elevation of extensive sections of the Greenland Ice Sheet as part of NASA's Global Climate Change program. Differences between overlapping portions of both surveys are compared for quality control. An independent assessment of the accuracy of the ATM survey is provided by comparison to surface surveys which were conducted using standard techniques. The goal of these projects is to make these measurements to an accuracy of ± 10 cm. Differences between the fall 1995 and 1996 surveys provides an assessment of net changes in the beach morphology over an annual cycle.

Maryl↗