Geology topics

Minerals & deposits

Find USGS publications on mineral resources and deposits. Search commodities and geographic names, then check source reports for geology and assessment methods.

Follow this topic with RSS

At least 1,729 records · Page 96Linked to original sources

USGS1968

Mineral equilibria in the system nepheline-alkali feldspar-plagioclase and their petrological significance

The purpose of this work is a theoretical consideration of equilibrium conditions in the system nepheline - alkali feldspar - plagioclase - alkali chloride aqueous solution based on the thermodynamic treatment of experimental data (Orville, 1963; Iiyama et al., 1963; Debron et al., 1961) for particular systems. The excess thermodynamic functions (Z E , S E , H E , V E ) of solid solutions were calculated for it. These data enable us to derive the diagrams of isotherms for the distribution of sodium components between nepheline and alkali feldspar ; between plagioclase and alkali feldspar ; and among plagioclase , nepheline , and alkali feldspar for the temperature range 400-1000° C. In order to check the calculated diagrams we analysed the minerals from the binary and ternary assemblages of the systems nepheline $ alkali feldspar $ plagioclase from various igneous massifs of nepheline syenites of the world. Temperatures obtained from different geothermometers were found to coincide satisfactorily.

Journal of Petrology↗

USGS2020

Evaluating the mineral commodity supply risk of the U.S. manufacturing sector

Trade tensions, resource nationalism, and various other factors are increasing concerns regarding the supply reliability of nonfuel mineral commodities. This is especially the case for commodities required for new and emerging technologies ranging from electric vehicles to wind turbines. In this analysis, we utilize a conventional risk-modeling framework to develop and apply a new methodology for assessing the supply risk to the U.S. manufacturing sector. Specifically, supply risk is defined as the confluence of three factors: the likelihood of a foreign supply disruption, the dependency of U.S. manufacturers on foreign supplies, and the ability of U.S. manufacturers to withstand a supply disruption. The methodology is applied to 52 commodities for the decade spanning 2007-2016. The results indicate that a subset of 23 commodities, including cobalt, niobium, rare earth elements, and tungsten, pose the greatest supply risk. Importantly, this supply risk is dynamic, shifting with changes in global market conditions.

Science Advances↗

USGS1970

Petrology of unshocked crystalline rocks and shock effects in lunar rocks and minerals

On the basis of rock modes, textures, and mineralogy, unshocked crystalline rocks are classified into a dominant ilmenite-rich suite (subdivided into intersertal, ophitic, and hornfels types) and a subordinate feldspar-rich suite (subdivided into poikilitic and granular types). Weakly to moderately shocked rocks show high strain-rate deformation and solid-state transformation of minerals to glasses; intensely shocked rocks are converted to rock glasses. Data on an unknown calcium-bearing iron metasilicate are presented.

Science↗

USGS1965

Isotopic ages of minerals from granitic rocks of the central Sierra Nevada and Inyo Mountains, California

Potassium-argon ages of biotite and hornblende from specimens of 17 granitic plutons in the central Sierra Nevada and the western Inyo Mountains, California, range from 69 to 183 m. y. The Mount Givens, Lamarck. and Round Valley Peak Granodiorites and related younger and more felsic quartz monzonites represent a pulse of magma emplaced in the general time interval of 80-90 million years ago, during Cretaceous time. Mineral ages of granitic rocks that flank these plutons on both the east and the west have been reduced during the emplacement of the Cretaceous intrusive rocks and are minimum ages for the time of crystallization. The ages of hornblende from the Tinemaha Granodiorite (150 to 180 m. y.) may approach crystallization dates. In conjunction with ages for other intrusive rocks in the Sierra Nevada and adjacent desert ranges they strongly suggest a magmatic episode during the Early Jurassic.

California↗

USGS2007

Metallogeny of the nikolai large igneous province (LIP) in southern alaska and its influence on the mineral potential of the talkeetna mountains

Recent geologic mapping has identified areas of extrusive basalts of the Middle to Late Triassic Nikolai Greenstone within the Wrangellia terrane that extend at least 80 km southwest of their previously known extent. Abundant dolerite sills of similar composition intrude Paleozoic and Mesozoic stratigraphy below the Nikolai throughout the central Talkeetna Mountains. The Talkeetna Mountains, therefore, have newly identified potential for copper, nickel, and platinum-group elements (PGEs) as disseminated, net-textured, or massive magmatic sulfide deposits hosted in mafic and ultramafic sill-form complexes related to emplacement of the Nikolai. Because of their potential high grades, similar magmatic sulfide targets have been the focus of increasing mineral exploration activity over the last decade in the Amphitheater Mountains and central Alaska Range, 100-200 km to the northeast. The Nikolai Greenstone, associated intrusions, and their metamorphosed equivalents also have potential to host stratabound disseminated "basaltic copper" deposits. Sedimentary and metasedimentary rocks overlying the Nikolai have the potential to host stratabound, disseminated, or massive "reduced-facies" type Cu-Ag deposits. Ultramafic rocks have been identified only in the extreme northeastern Talkeetna Mountains to date. However, coincident gravity and magnetic highs along the leading (northwestern) edge of and within Wrangellia in the Talkeetna and Clearwater Mountains suggest several areas that are highly prospective for ultramafic rocks related to extrusion of Nikolai lavas. In particular, the distribution, geometry, and composition of sills within the pre-Nikolai stratigraphy and the structural and tectonic controls on intrusive versus extrusive rock distribution deserve serious examination. Copyright ?? 2007 The Geological Society of America.

Special Paper of the Geological Society of America↗

USGS2015

Widespread groundwater-level offsets caused by the M w 5.8 Mineral, Virginia, earthquake of 23 August 2011

Groundwater levels were offset in bedrock observation wells, measured by the U.S. Geological Survey or others, as far as 553 km from the M w 5.8 Mineral, Virginia (USA), earthquake on 23 August 2011. Water levels dropped as much as 0.47 m in 34 wells and rose as much as 0.15 m in 12 others. In some wells, which are as much as 213 m deep, the water levels recovered from these deviations in hours to days, but in others the water-level offset may have persisted. The groundwater-level offsets occurred in locations where the earthquake was at least weakly felt, and the maximum water-level excursion increased with felt intensity, independent of epicentral distance. Coseismic static strain from the earthquake was too small and localized to have contributed significantly to the groundwater-level offsets. The relation with intensity is consistent with ground motion from seismic waves leading to the water-level offsets. Examination of the hydrographs indicates that short-period ground motion most likely affected the permeability of the bedrock aquifers monitored by the wells.

GSA Special Papers↗

USGS2015

Ground motion simulation for the 23 August 2011, Mineral, Virginia earthquake using physics-based and stochastic broadband methods

Three broadband simulation methods are used to generate synthetic ground motions for the 2011 Mineral, Virginia, earthquake and compare with observed motions. The methods include a physics‐based model by Hartzell et al. (1999, 2005), a stochastic source‐based model by Boore (2009), and a stochastic site‐based model by Rezaeian and Der Kiureghian (2010, 2012). The ground‐motion dataset consists of 40 stations within 600 km of the epicenter. Several metrics are used to validate the simulations: (1) overall bias of response spectra and Fourier spectra (from 0.1 to 10 Hz); (2) spatial distribution of residuals for GMRotI50 peak ground acceleration (PGA), peak ground velocity, and pseudospectral acceleration (PSA) at various periods; (3) comparison with ground‐motion prediction equations (GMPEs) for the eastern United States. Our results show that (1) the physics‐based model provides satisfactory overall bias from 0.1 to 10 Hz and produces more realistic synthetic waveforms; (2) the stochastic site‐based model also yields more realistic synthetic waveforms and performs superiorly for frequencies greater than about 1 Hz; (3) the stochastic source‐based model has larger bias at lower frequencies (<0.5  Hz) and cannot reproduce the varying frequency content in the time domain. The spatial distribution of GMRotI50 residuals shows that there is no obvious pattern with distance in the simulation bias, but there is some azimuthal variability. The comparison between synthetics and GMPEs shows similar fall‐off with distance for all three models, comparable PGA and PSA amplitudes for the physics‐based and stochastic site‐based models, and systematic lower amplitudes for the stochastic source‐based model at lower frequencies (<0.5  Hz).

Bulletin of the Seismological Society of America↗

USGS2012

Initial assessment of the intensity distribution of the 2011 M w 5.8 Mineral, Virginia, earthquake

The intensity data collected by the U.S. Geological Survey (USGS) "Did You Feel It?" (DYFI) Website (USGS, DYFI; http://earthquake.usgs.gov/earthquakes/dyfi/events/se/082311a/us/index.html, last accessed Sept 2011) for the M w 5.8 Mineral, Virginia, earthquake, are unprecedented in their spatial richness and geographical extent. More than 133,000 responses were received during the first week following the earthquake. Although intensity data have traditionally been regarded as imprecise and generally suspect (e.g., Hough 2000), there is a growing appreciation for the potential utility of spatially rich, systematically determined DYFI data to address key questions in earthquake ground-motions science (Atkinson and Wald, 2007; Hauksson et al., 2008).

Virginia↗

USGS1958

Technique for the extraction and partial chemical analysis of fluid-filled inclusions from minerals

A method has been developed for the extraction and limited chemical analysis of the materials in solution in the fluid from the very minute fluid-filled inclusions such as commonly occur in whitish or milky quartz. The method may also be applied, with some reservations, to a variety of other minerals. As the amounts of substances in the fluid are small compared with possible contaminants, great care is needed in sample purification and cleaning; an electrolytic method has been found to be the only satisfactory final cleaning step. Following this, the inclusions are opened by ball milling of the cleaned sample, with deionized water, in an alumina ball mill using alumina grinding media. The ions present in the resultant slurry are separated from the ground quartz by electrodialysis and analyzed. Other methods, such as the decrepitation of a sample in an absorption train, are used to estimate the amount of H2O and CO2 in the inclusions. The most significant part of the analytical work has been to determine the ratios between the alkali metals. The materials in solution in the fluid-filled inclusions from 11 samples of quartz have been analyzed by the ball milling-electrodialysis method. Although there are large differences between samples, the average weights of the alkali metal ions found, for all samples, in milligrams per kilogram of quartz, are: Li+-0.92, Na+-99, K+-133, Rb+-0.45, Cs+-0.38 (atomic ratios, in the same sequence: 0.03/1.00/0.79/0.001/0.0007). In addition, 27 to 193 milligrams of CI", and 5 to 140 milligrams of SOr were found, per kilogram of quartz. H2O and COa were determined on only one sample. Six of the samples were from gold-quartz veins in the Grass Valley district, California. In these six the Na+/K+ ratios were all very similar, but the amounts of Li+, Rb+ and Cs+ found varied greatly. Although there are serious limitations to this and to all other techniques developed, it is felt that the results presented are sufficiently encouraging to warrant further study and possible application to specific geologic problems, such as the identification of epochs of quartz deposition

Economic Geology↗

USGS1964

Veins of hypogene manganese oxide minerals in the southwestern United States

Characteristic minerals are psilomelane, hollandite, cryptomelane, and coronadite, more rarely ramsdellite and pyrolusite. Host rocks are Mn-deficient; 80 percent of examples are middle to late Tertiary layered volcanics. Though deposits are shallow, mostly mined to only 100-200 feet (maximum 500 feet), a hypogene origin is indicated by their persistent association with barite and fluorite, a peripheral position in the zonal pattern of some metal-mining districts, alteration of plagioclase to K-spar, and abundance of W, Pb, Cu, Mo, Ti, As, Sb. They represent the subzone of Mn-bearing epithermal vein deposits lying nearest the surface, succeeded in depth by four other subzones: barite, fluorite, gold-silver, and base metals.

Arizona, California, Colorado, Nevada, New Mexico,↗

USGS1966

Sulfide-mineral zoning in the basal nonesuch shale, Northern Michigan

A zone, 1 to 50 feet thick, at the base of the Nonesuch Shale , is relatively rich in copper, chiefly as chalcocite. Pyrite is the characteristic sulfide mineral of the overlying 400 to 600 feet of the formation. The boundary of the cupriferous zone with the pyrite zone regionally transgresses both stratigraphic layering and fades gradations indicative of ancient environmental boundaries. The top of the cupriferous zone is marked by the upward sequence, chalcocite-bornite-chalcopyrite-pyrite, and by the cadmium sulfide , greenockite. The sulfide zoning does not appear to be syngenetic. The regional configuration of the cupriferous zone suggests, instead, that the copper was introduced after deposition of the entire 50-foot sequence of strata. The area in which the top of the cupriferous zone is stratigraphically highest is related spatially, and probably genetically, to a zone of wedging in the underlying Copper Harbor Conglomerate.

Michigan↗

USGS1970

Distribution of silver and copper in placer gold derived from the northeastern part of the Colorado Mineral Belt

Placer gold grains from the modern streams originating in the Colorado Mineral Belt were examined for silver and copper content on a quantitative basis utilizing the electron microprobe. The variation among grains from a particular locality is large, but the mean silver content of the interior of the placer gold grains from each locality and (or) the variation in copper content may be of value in distinguishing lode sources and gold mining districts. Microprobe analysis of the interior of gold grains is independent of chemical actions that affect the border of placer gold grains during their transport history, and it is shown that distinct compositional groups of different lode sources may be identified even in a single sample--information that may aid in recognizing the existence of concealed lodes that once contributed to a placer environment.

Colorado↗

USGS1971

A paleohydrologic model for mineralization of the White Pine copper deposit, northern Michigan

Pertinent physical properties of the upper Keweenawan rocks can be measured or inferred within a sufficiently narrow range to make the quantitative evaluation of various paleohydrologic models for the origin of the White Pine copper deposit feasible. The approach is illustrated here by calculations for models that involve lateral migration of fluids through the subjacent Copper Harbor Conglomerate to the site of the deposit and stripping of copper from these solutions where they percolated upward through the Nonesuch Shale. The calculations reveal limitations to theories of origin that would not be evident from purely qualitative consideration; some of these limitations could be useful to exploration. For example, if the water was yielded by compaction of the Copper Harbor Conglomerate and contained 50 ppm Cu, there must have been significant convergence of solution paths toward White Pine. Surface water entering the Copper Harbor Conglomerate on the north limb of the Lake Superior syncline is an adequate source if it could be shown that the point of entry was once significantly higher in altitude than the water table at White Pine; this model implies a major copper deposit at great depth north of the axis of the syncline. Ground water entering the Nonesuch Shale up dip from White Pine is not a possible source of mineralizing solutions.

Michigan↗

USGS1974

K-Ar Age Relations of Granodiorite Emplacement and Tungsten and Gold Mineralization near the Getchell Mine, Humboldt County, Nevada

A granodiorite stock intrudes complexly folded and thrust-faulted Paleozoic sedimentary rocks in the Osgood Mountains of eastern Humboldt County, Nevada. Within the metamorphic aureole surrounding the pluton, the sedimentary rocks are converted to cordierite hornfels and marble; tungsten-bearing tactites developed along the contacts of the granodiorite. Cutting the granodiorite and sedimentary rocks is the Getchell fault, along which the disseminated gold ore bodies of the Getchell mine are localized. K-Ar ages of the granodiorite, andesite porphyry, tungsten-bearing tactites, and altered granodiorite from the Getchell mine indicate that emplacement, alteration, and mineralization are all part of a magmatic-thermal episode which took place approximately 90 m.y. ago.

Nevada↗

USGS1985

U-Pb isochron age and Pb isotope systematics of the Golden Fleece vein; implications for the relationship of mineralization to the Lake City caldera, western San Juan Mountains, Colorado

A U-Pb isochron age of 27.5 + or - 0.5 m.y. has been determined for the Golden Fleece vein, southwestern Colorado, which contains an assemblage of pitchblende and gold-silver tellurides unique within the Lake City area. Initial Pb isotope ratios of ore samples from the vein ( 206 Pb/ 204 Pb = 19.08-19.58; 207 Pb/ 204 Pb = 15.643-15.682; 208 Pb/ 204 Pb = 38.533-38.84) are among the most radiogenic values reported from the San Juan Mountains and suggest that a significant component of common Pb, and possibly other metals, was derived from upper crustal Precambrian rocks by deeply circulating hydrothermal fluids. The 27.5-m.y. age of the Golden Fleece vein is identical, within analytical uncertainty, to the age of the quartz latite lavas that it cuts. This clearly documents the relationship of the vein to the waning stages of activity associated with the Uncompahgre caldera (27-29 m.y.) rather than to early activity related to the 23.1-m.y.-old Lake City caldera. Other veins in the Lake City area have Pb isotope ratios and mineral assemblages that are distinctly different from the Golden Fleece, and most of these veins are thought to be genetically related to the younger Lake City caldera.

Economic Geology↗

USGS1985

The Schwartzwalder uranium deposit, II: Age of uranium mineralization and lead isotope constraints on genesis

U-Pb isotope analyses of ores from the Schwartzwalder uranium mine, Colorado, show that these ores have high amounts of initial (common) Pb and that the initial Pb was both variable and relatively radiogenic in its Pb isotope ratios ( 206 Pb/ 204 Pb = 26-30). As a result, the only useful approach to dating these ores is with U-Pb isochrons, and even so, some means of dealing with the variable initial Pb isotope ratios is required. Because the common Pb in these ores was apparently derived from sources of similar age and Th/U, the observed 208 Pb/ 204 Pb of these Th-free ores can be used either to identify sample suites with similar initial Pb isotope ratios or to normalize for the variable initial Pb isotope ratios. The resulting U-Pb isochrons indicate an age of mineralization for both Illinois vein and Titan vein ores of 69.3 + or - 1.1 m.y., suggesting that the deposit was formed during the earliest stages of Laramide uplift and under at least 3 km of Phanerozoic cover. The initial Pb isotope systematics of the ores show that the metals in the Schwartzwalder ores were derived from source(s) of 1,730 + or - 130-m.y.-age, with a Th/U of 2.2 + or - 0.2 and 238 U/ 204 Pb of 30 to 60. These restrictions on the source(s) of the metals rule out the possibility that the deposit could have been formed by remobilization of a Proterozoic uranium deposit, and both the 69.3-m.y.-age of the ores and their initial Pb isotope ratios preclude any contribution of metals to the deposit by younger volcanics such as those in the Denver Formation.

Economic Geology↗

USGS1989

The Relief Canyon gold deposit, Nevada: A mineralized solution breccia

The Relief Canyon gold deposit in the Humboldt Range of western Nevada is a low-grade, high-tonnage orebody of Tertiary or younger age. The host rocks include limestones of the Triassic Cane Spring Formation, which are overlain by shales of the Triassic Grass Valley Formation. The rocks were folded and metamorphosed to greenschist grade during Jurassic and Cretaceous regional tectonic activity. Mesozoic thrusting may have occurred along the shale-limestone contact, but evidence has been obscured by later hydrothermal activity. The sedimentary rocks were nominally offset along several Late Tertiary normal faults related to uplift of the range.The upper part of the Cane Spring Formation is composed of a poorly sorted breccia composed of limestone clasts with a clay matrix. Irregular pockets within this zone are filled with clay- to pebble-sized fragments derived from the Grass Valley shale. The enclosing limestone beds were tilted moderately to the southwest during Mesozoic deformation, whereas bedding within these pockets is generally horizontal, indicating post-tilting deposition of the sediments. The sediments show graded bedding and other sedimentary features that indicate deposition from flowing water. Thermally mature carbon derived from the limestone is also concentrated in small pockets in the matrix. The breccia unit is likely the product of low-temperature solution brecciation. Ground water dissolved much of the limestone directly beneath the shales, progressively creating irregular cavities and the breccia. Sediments derived from the overlying Grass Valley shale were fiuvially deposited as a matrix to the developing solution breccia.Episodic pulses of hydrothermal fluids were introduced along faults and possibly mixed with the ground water in the breccia zone. Initially, jasperoids formed along the faults, but later hydrothermal pulses introduced gold, silica, and fluorine into both the early jasperoids and the unconsolidated cave-fill sediments to form the orebody. Continued solution-related brecciation chaotically disrupted the gold deposit.Gold, fluorite, pyrite, silver, calcite, and fine-grained silica are the principal hydrothermal minerals in the deposit. Gold was deposited as micron-sized flakes of native gold and rarely as electrum during a relatively late stage of silicification of the jasperoids, the carbon-rich zones, and the clay-rich matrix of the breccia. Fluorite was deposited with and later than the gold in the jasperoids, and it in part replaced the clay-rich breccia matrix. Antimony, arsenic, mercury, and thallium are directly associated with gold in the orebody.The deposit formed at a relatively shallow depth. On the basis of fluid inclusion data, late-stage hydrothermal fluids related to gold and fluorite deposition were extremely dilute and had temperatures near 200 degrees C. The fluid inclusions in fluorite show no evidence for boiling, but porous crackle breccias in the jasperoids suggest that hydrobrecciation took place.

Economic Geology↗

USGS1987

Diagenesis and fluid flow in the San Juan Basin, New Mexico - regional zonation in the mineralogy and stable isotope composition of clay minerals in sandstone.

The Westwater Canyon Member of the Upper Jurassic Morrison Formation is a relatively homogeneous, hydrologically continuous 100-m-thick sequence of massive fluvial sandstone, bounded above and below by relatively heterogeneous, hydrologically discontinuous units and has served as a primary conduit for fluids within this stratigraphic interval. Patterns of mineral-fluid reactions suggest a basinwide hydrologic regime in which warm, evolved fluids migrated up-dip from the center of the basin under the influence of a regional hydraulic head. -from Authors

American Journal of Science↗