USGS Science⌕ Search

Geology topics

Minerals & deposits

Find USGS publications on mineral resources and deposits. Search commodities and geographic names, then check source reports for geology and assessment methods.

At least 1,693 records · Page 94Linked to original sources

Assessing mineral supply concentration from different perspectives through a case study of zinc

Increasing demand for nonfuel mineral commodities has increased concerns regarding the reliability of their supplies. “Criticality” assessments over the past decade have attempted to capture this concern through a set of indicators, the most common of which quantifies the risk associated with market concentration by applying the Herfindahl-Hirschman Index (HHI) to the world production of a given commodity by country in a given year. Although this approach is useful, it inherently assumes that all of world production is available to the market and is thus potentially at risk. In this analysis, the HHI, as well as HHI weighted by country governance, is calculated for mined and refined zinc using the standard approach of using all world production data and comparing that to the HHI when using the best estimate of what is available to the world market. The results indicate that although the HHI of both mined and refined zinc world production has increased markedly over the past decade, the HHI for what is available to the market for mined and refined zinc has remained relatively constant and low, which is indicative of minimal supply risk. This is mainly owing to the fact that a large and increasing share of the world’s mined and refined zinc production comes from China, but that production supplies domestic consumption as well as small amounts of exports. As a result, the zinc materials that are available to the world market outside of China are produced by a relatively large and diverse set of countries. Although these analyses are specific to zinc, they are likely to be comparable for other commodities of which the largest producers are also the largest consumers and highlight the importance of examining different perspectives in criticality assessments.

Mineral Economics↗

Scanning electron microscopy of clays and clay minerals

The scanning electron microscope (SEM) proves to be ideally suited for studying the configuration, texture, and fabric of clay samples. Growth mechanics of crystalline units—interpenetration and interlocking of crystallites, crystal habits, twinning, helical growth, and topotaxis—also are uniquely revealed by the SEM. Authigenic kaolins make up the bulk of the examples because their larger crystallite size, better crystallinity, and open texture make them more suited to examination by the SEM than most other clay mineral types.

Clays and Clay Minerals↗

Identification of kaolins and associated minerals in altered volcanic rocks by infrared spectroscopy

Mid-infrared spectroscopy (2.5-50 /µm) has been extensively used to identify and characterize clays and associated minerals in rocks and soils, with particular emphasis on the 3-, 10-, and 20-/µm regions (Farmer and Russell, 1967; Farmer, 1968; White, 1971; Van der Marel and Beutelspacher, 1976). However, application of mid-infrared spectroscopy in remote-sensing activities has been restricted because the spectral information occurs only as a small perturbation to the emitted radiation from the earth's surface, and much of that which is especially relevant to clays (e.g., the 3.0-µm region) is obscured by atmospheric absorption.

Clays and Clay Minerals↗

Duration of hydrothermal alteration and mineralization of the Don Manuel porphyry copper system, central Chile

The Don Manuel porphyry copper system, located in the Miocene–Pliocene metallogenic belt of central Chile, contains spatially zoned alteration styles common to other porphyry copper deposits including extensive potassic alteration, propylitic alteration, localized sericite-chlorite alteration and argillic alteration but lacks pervasive hydrolytic alteration typical of some deposits. It is one of the youngest porphyry copper deposits in the Andes. Timing of mineralization and the hydrothermal system at Don Manuel are consistent with emplacement of the associated intrusions (ca. 4 and 3.6 Ma). Two molybdenite samples yielded consistent ages of 3.412 ± 0.037 and 3.425 ± 0.037 Ma. 40 Ar/ 39 Ar ages on hydrothermal biotites (3.57 ± 0.02, 3.51 ± 0.02, 3.41 ± 0.01, and 3.37 ± 0.01 Ma) are associated with potassic alteration. These ages are younger than the youngest intrusion by ~300 k.y. recording the cooling of the system below 350 °C. Such a time gap can be explained by fluxing of hot magmatic fluids from deeper magmatic sources.

central Chile↗

Tungsten skarn quantitative mineral resource assessment and gold, rare earth elements, graphite, and uranium qualitative assessments of the Kuldjuktau and Auminzatau Ranges, in the central Kyzylkum region, Uzbekistan

A new quantitative mineral resource assessment for tungsten skarn was conducted for the Auminzatau and Kuldjuktau mountain ranges in Central Uzbekistan, along with qualitative assessments of orogenic gold, rare earth elements (REEs), amorphous graphite, and uranium. By integrating a variety of geological, geochemical, geophysical, and remote sensing data sets, estimates of undiscovered tungsten skarn deposits in permissive tracts are combined with grade and tonnage distributions of known deposits to generate probabilistic estimates of undiscovered resources. Undiscovered deposits in Auminzatau are estimated to contain median resources of 98 thousand metric tons (kt) of WO 3 with a 70 percent (%) probability of at least 28 kt and a 10% probability of at least 468 kt, of which 16 kt to 293 kt may be economic to extract. In Kuldjuktau, the undiscovered deposits are estimated to contain median resources of 27 kt of WO 3 with a 60% probability of at least 12 kt and a 10% probability of at least 208 kt, of which 5 kt to 132 kt may be economic to extract. Our results suggest that the Auminzatau–Kuldjuktau Mountains area is highly prospective for additional discovery of significant Au and U resources and has low prospectivity for discovery of significant REE and graphite resources.

Minerals↗

Mineral phase-element associations based on sequential leaching of ferromanganese crusts, Amerasia Basin Arctic Ocean

Ferromanganese (FeMn) crusts from Mendeleev Ridge, Chukchi Borderland, and Alpha Ridge, in the Amerasia Basin, Arctic Ocean, are similar based on morphology and chemical composition. The crusts are characterized by a two- to four-layered stratigraphy. The chemical composition of the Arctic crusts differs significantly from hydrogenetic crusts from elsewhere of global ocean by high mean Fe/Mn ratios, high As, Li, V, Sc, and Th concentrations, and high detrital contents. Here, we present element distributions through crust stratigraphic sections and element phase association using several complementary techniques such as SEM-EDS, LA-ICP-MS, and sequential leaching, a widely employed method of element phase association that dissolves mineral phases of different stability step-by-step: Exchangeable cations and Ca carbonates, Mn-oxides, Fe-hydroxides, and residual fraction. Sequential leaching shows that the Arctic crusts have higher contents of most elements characteristic of the aluminosilicate phase than do Pacific crusts. Elements have similar distributions between the hydrogenetic Mn and Fe phases in all the Arctic and Pacific crusts. The main host phases for the elements enriched in the Arctic crusts over Pacific crusts (Li, As, Th, and V) are the Mn-phase for Li and Fe-phase for As, Th, and V; those elements also have higher contents in the residual aluminosilicate phase. Thus, higher concentrations of Li, As, Th, and V likely occur in the dissolved and particulate phases in bottom waters where the Arctic crusts grow, which has been shown to be true for Sc, also highly enriched in the crusts. The phase distributions of elements within the crust layers is mostly consistent among the Arctic crusts, being somewhat different in element concentrations in the residual phase.

Minerals↗

Hydrogen and oxygen isotope exchange reactions between clay minerals and water

The extent of hydrogen and oxygen isotope exchange between clay minerals and water has been measured in the temperature range 100–350° for bomb runs of up to almost 2 years. Hydrogen isotope exchange between water and the clays was demonstrable at 100°. Exchange rates were 3–5 times greater for montmorillonite than for kaolinite or illite and this is attributed to the presence of interlayer water in the montmorillonite structure. Negligible oxygen isotope exchange occurred at these low temperatures. The great disparity in D and O 18 exchange rates observed in every experiment demonstrates that hydrogen isotope exchange occurred by a mechanism of proton exchange independent of the slower process of O 18 exchange. At 350° kaolinite reacted to form pyrophyllite and diaspore. This was accompanied by essentially complete D exchange but minor O 18 exchange and implies that intact structural units in the pyrophyllite were inherited from the kaolinite precursor.

Geochimica et Cosmochimica Acta↗

Geochemical characteristics of igneous rocks associated with epithermal mineral deposits—A review

Newly synthesized data indicate that the geochemistry of igneous rocks associated with epithermal mineral deposits varies extensively and continuously from subalkaline basaltic to rhyolitic compositions. Trace element and isotopic data for these rocks are consistent with subduction-related magmatism and suggest that the primary source magmas were generated by partial melting of the mantle-wedge above subducting oceanic slabs. Broad geochemical and petrographic diversity of individual igneous rock units associated with epithermal deposits indicate that the associated magmas evolved by open-system processes. Following migration to shallow crustal reservoirs, these magmas evolved by assimilation, recharge, and partial homogenization; these processes contribute to arc magmatism worldwide. Although epithermal deposits with the largest Au and Ag production are associated with felsic to intermediate composition igneous rocks, demonstrable relationships between magmas having any particular composition and epithermal deposit genesis are completely absent because the composition of igneous rock units associated with epithermal deposits ranges from basalt to rhyolite. Consequently, igneous rock compositions do not constitute effective exploration criteria with respect to identification of terranes prospective for epithermal deposit formation. However, the close spatial and temporal association of igneous rocks and epithermal deposits does suggest a mutual genetic relationship. Igneous systems likely contribute heat and some of the fluids and metals involved in epithermal deposit formation. Accordingly, deposit formation requires optimization of source metal contents, appropriate fluid compositions and characteristics, structural features conducive to hydrothermal fluid flow and confinement, and receptive host rocks, but not magmas with special compositional characteristics.

Ore Geology Reviews↗

Harding Iceland spar: A new δ18O−δ13C carbonate standard for hydrothermal minerals

An isotopically homogeneous calcite, Harding Iceland Spar (HIS), having 6180 = +11.78 ± 0.07‰ (= +22.15‰ for CO 2 ) and δ 13 C = −4.80 ± 0.02‰, has been prepared in quantities suitable for use as a working standard in mass spectrometric analysis. The isotopic values are well-suited for analysis of minerals of hydrothermal origin.

Chemical Geology↗

Mineral resource management of the Outer Continental Shelf : leasing procedures, evaluation of resources, and supervision of production operations on leased lands of the Outer Continental Shelf

An important function of the Geological Survey is the evaluation and management of the mineral resources of the Outer Continental Shelf, particularly with respect to oil and gas, salt, and sulfur. Production of oil and gas from the Outer Continental Shelf of the United States has increased substantially over the past 20 years and represents an increasing percentage of total United States production. As discovery of major onshore production of oil and gas has become more difficult, the search has moved into the surrounding waters where submerged sedimentary formations are conducive to the accumulation of oil and gas. Increased energy demands of recent years have accelerated the pace of offshore operations with a corresponding improvement in technology as exploration and development have proceeded farther from shore and into deeper water. While improved technology and enforcement of more stringent regulations have made offshore operations safer, it is unrealistic to believe that completely accident-free operations can ever be achieved. Only slightly more than six percent of the world's continental terrace is adjacent to the United States, but less than one percent has been explored for oil and gas. Since the lead time for the development of offshore oil and gas resources can be as much as a decade, they do not provide an immediate energy supply but should be viewed in the light of a near-term source with a potential of becoming a medium-range source of supply pending the development of alternative energy sources. Revenues from the Outer Continental Shelf are deposited to the general fund of the United States Treasury. A major portion of these funds is allocated to the Land and Water Conservation Fund, the largest Federal grant-in-aid program of assistance to States, counties, and cities for the acquisition and development of public parks, open space, and recreation lands and water.

Circular↗

Mineral resource assessment of the Iron River 1° x 2° quadrangle, Michigan and Wisconsin

The Iron River 1? x 2? quadrangle contains identified resources of copper and iron. Copper-rich shale beds in the north part of the quadrangle contain 12.2 billion pounds (5.5 billion kilograms) of copper in well-studied deposits including 9.2 billion pounds (4.2 billion kilograms) that are economically minable by 1980 standards. At least several billion pounds of copper probably exist in other parts of the same shale beds, but not enough data are available to measure the amount. A small amount, about 250 million pounds (113 million kilograms), of native copper is known to remain in one abandoned mine, and additional but unknown amounts remain in other abandoned mines. About 13.25 billion tons (12.02 billion metric tons) of banded iron-formation averaging roughly 30 percent iron are known within 500 feet (152.4 meters) of the surface in the Gogebic, Marquette, and Iron River-Crystal Falls districts. A small percentage of that might someday be minable as taconite, but none is now believed to be economic. Some higher grade iron concentrations exist in the same iron-formations. Such material was the basis of former mining of iron in the region, but a poor market for such ore and depletion of many deposits have led to the decline of iron mining in the quadrangle. Iron mines of the quadrangle were not being worked in 1980. Many parts of the quadrangle contain belts of favorable host rocks for mineral deposits. Although deposits are not known in these belts, undiscovered deposits of copper, zinc, lead, silver, uranium, phosphate, nickel, chromium, platinum, gold, and diamonds could exist.

Michigan, Wisconsin↗

Maps showing the distribution and relationships of selected metals in heavy-mineral concentrates of the Hells Hole Further Planning Area (RARE II), Greenlee County, Arizona, and Grant County, New Mexico

The Wilderness Act (Public Law 99-577, Sept. 3, 1964) and related acts require the U.S. Geological Survey and the U.S. Bureau of Mines to survey certain areas on Federal lands to determine their mineral resource potential. Results must be made available to the public and be submitted to the President and the Congress. This report presents the results of a geochemical survey of the Hells Hole Further Planning Area (RARE II) in the Apache National Forest, Greenlee County, Ariz. and the Gila National Forest, Grant County, N. Mex. The Hells Hole Further Planning Area (03138) was classified as a proposed wilderness and further planning area during the Second Roadless Area Review and Evaluation (RARE II) by the U.S. Forest Service, January 1979.

Arizona, New Mexico↗

Mineral resources map of the Tanacross Quadrangle, Alaska

Areas favorable for the occurrence of two types of mineral deposits are delineated on the map. Known deposits and occurrences are also shown on the map and available data on them are provided in table 1. Information from the known deposits combined with geologic, geochemical, geophysical, and earth satellite data presented in the other components of the Tanacross folio provide the basis for the selection of favorable areas. However because bedrock exposure is poor in the Tanacross quadrangle, types of deposits other than those now known to occur may eventually be found, and boundaries of the area delineated as favorable may change as more information, particularly from drilling, is obtained.

Alaska↗

Distribution and abundance of arsenic in bedrock, mineralized, vein, and altered rock samples, McCarthy quadrangle, Alaska

A geochemical survey was conducted in the McCarthy quadrangle Alaska, to identify areas containing anomalous concentrations of various metallic and nonmetallic elements. This study incorporates the results of analyses for arsenic from 827 rock samples collected in the quadrangle, and analyzed by the U.S. Geological Survey between 1961 and 1976 using semiquantitative emission spectrophotometry. The samples included both unaltered and hydrothermally altered rocks. The hydrothermally altered rock consist of ore grade material, gossans, fault gouge, vein materials, silica-rich boxworks, veins adjacent to faults, and fracture surfaces showing evidence of mineralization. Therefore, the analytical data set may be considered representative of most rock types known to occur in the study area. The accompanying map shows the distribution and relative abundance of arsenic in rocks collected. Geochemical analyses have been grouped and are represented by symbols on a base map, which includes topography and generalized geology. The range of analytical values and the symbol that represents it are shown on the histogram. Graphical representation of analytical values on the map permits easy observation of any large variation resulting from separate or duplicate samples collected at the same or nearby localites. All samples were crushed and ground to pass through a 180 micron opening sieve before being analyzed.

Alaska↗

Spatial Databases of Geological, Geophysical, and Mineral Resource Data Relevant to Sandstone-Hosted Copper Deposits in Central Kazakhstan

Central Kazakhstan is host to one of the world's giant sandstone-hosted copper deposits, the Dzhezkazgan deposit, and several similar, smaller deposits. The United Stated Geological Survey (USGS) is assessing the potential for other, undiscovered deposits of this type in the surrounding region of central Kazakhstan. As part of this effort, Syusyura compiled and partially translated an array of mostly unpublished geologic, geophysical, and mineral resource data for this region in digital format from the archives of the former Union of Soviet Socialists Republics (of which Kazakhstan was one of the member republics until its dissolution in 1991), as well as from later archives of the Republic of Kazakhstan or of the Kazakhstan consulting firm Mining Economic Consulting (MEC). These digital data are primarily map-based displays of information that were transmitted either in ESRI ArcGIS, georeferenced format, or non-georeferenced map image files. Box and Wallis reviewed all the data, translated Cyrillic text where necessary, inspected the maps for consistency, georeferenced the unprojected map images, and reorganized the data into the filename and folder structure of this publication.

Open-File Report↗

Feasibility study for the quantitative assessment of mineral resources in asteroids

This study was undertaken to determine if the U.S. Geological Survey’s process for conducting mineral resource assessments on Earth can be applied to asteroids. Successful completion of the assessment, using water and iron resources to test the workflow, has resulted in identification of the minimal adjustments required to conduct full resource assessments beyond Earth. We also identify the types of future studies that would greatly reduce uncertainties in an actual future assessment. Whereas this is a feasibility study and does not include a complete and robust analysis of uncertainty, it is clear that the water and metal resources in near-Earth asteroids are sufficient to support humanity should it become a fully space-faring species.

Open-File Report↗

Soil anomalies associated with Cu-Ni mineralization in the South Kawishiwi area, northern Lake County, Minnesota

Geochemical sampling in the contact zone between the Giants Range Granite and the Duluth Gabbro Complex along the South Kawishiwi River indicates the presence of extensive soil anomalies associated with the known Cu-Ni-Co-Ag mineralization in the basal part of the Duluth Gabbro Complex. A close spatial relationship was found between the ore bodies and associated anomalies, despite the fact that the parent material of the sampled soils was glacial overburden that mantles the area to a depth of 0-50 feet. The <74 mesh fraction of B-horizon soils was found to be an effective sample type for geochemical exploration in this area. Trace metals are believed to be held primarily by the clay-size hydrated iron oxides and manganese oxide, which are somewhat enriched in the fine fraction of the B-horizon soils.

Minnesota↗

Preliminary report on the geology and gold mineralization of the Gold Basin-Lost Basin mining districts, Mohave County, Arizona

The Gold Basin-Lost Basin mining districts are adjacent to each other in northwestern Arizona, south of Lake Mead, and just west of the Grand Wash Cliffs. Most recorded production from lode deposits is credited to mines in the Gold Basin district, which is in the southern White Hills, whereas the bulk of the placer production has been from placers worked along the eastern flank of the Lost Basin range, about 16 km to the northeast across Hualapai Valley. Gold in quartz veins apparently was first discovered in the 1870's. Recorded production from the districts between 1901 and 1942 includes 13,508 oz gold and 6,857 oz silver, and this recorded production has a dollar value of about $359,000 of which 98 percent is credited to gold. Most known occurrences of lode gold in the districts are associated with widespread quartz-cored pegmatite-vein systems, presumably emplaced episodically during Proterozoic X, Proterozoic Y, and Late Cretaceous time into Proterozoic X metamorphic and igneous rocks. The bulk of the veins apparently were emplaced during the Late Cretaceous, and they were localized along both high- and low-angle structures in the Proterozoic X terrane. These veins appear to be associated genetically with presumably Late Cretaceous, two-mica magmatism. A Late Cretaceous two-mica monzogranite crops out in an approximately 4 to 5 km 2 area in the southern part of the Gold Basin district and includes some facies of episyenite. Some gold is found also in small episyenitic alteration pipes, or in veins caught up tectonically along a regionally extensive, low-angle detachment surface which crops out prominently in the southern White Hills, and has been traced for at least 30 km along the western flank of the White Hills. Hydrothermal micas from selected veins in the districts give K-Ar ages of 822, 712, 69, 68, and 65 m.y. (million years), and from the pipes, ages of 130 and 127 m.y. The oldest ages (822 and 712 m.y.) presumably reflect resetting of veins that probably were emplaced penecontemporaneous with emplacement of the 1,400-m.y. granite of Gold Butte, which crops out just to the north of Lake Mead. The latter ages (130 and 127 m.y.) must reflect either the presence of excess radiogenic argon in the hydrothermal environment of the evolving pipes, or contamination of the dated mineral separates by Proterozoic mica and (or) feldspar. Primary white mica from the two-mica monzogranite gives a K-Ar age of 72 m.y.. Most occurrences of gold in the veins and pipes probably reflect either remobilization of gold from gold-bearing, near-surface Proterozoic source areas, or anatectic incorporation of gold into Late Cretaceous, two-mica magmas from very deep gold-bearing Proterozoic sources. Deposition of gold occurred in a mesothermal environment during the galena-, chalcopyrite-, ferroan-carbonate-bearing stages of the veins. Homogenization studies of fluid inclusions prominent in the veins and pipes yield temperatures mostly in the range 150 to 280°C. Early-stage, trapping temperatures at the pipes probably were about 330°C and pressures in the range 500 to 700 bars can be inferred. Fluids were moderately saline, mostly 4 to 16 weight percent NaC1 equivalent, nonboiling, and also contain appreciable amounts of carbon dioxide and, in places, fluorine. Such fluids associated with the deposition of gold in these districts largely bridge the fluid composition interval between many other epithermal precious-metal and porphyry coper deposits. Approximately 350 compositional analyses obtained from native-gold samples from 20 mines in the Gold Basin district and 48 veins in the Lost Basin district show silver contents that range from 6 to approximately 50 weight percent, and copper from 0.01 to 0.5 weight percent. Metal zonation and possible relation to a porphyry copper system at depth can be inferred from some of these chemical data. The differences in the composition of placer gold from 24 occurrences in the Lost Basin district from that of nearby lode sources suggest that other sources contributed gold to the placers or that locally derived grains were enriched by oxidation and weathering of the lodes.

Arizona↗