USGS Science⌕ Search

Geology topics

Minerals & deposits

Find USGS publications on mineral resources and deposits. Search commodities and geographic names, then check source reports for geology and assessment methods.

At least 1,531 records · Page 85Linked to original sources

Geology of the Silsilah ring complex, and associated tin mineralization, Kingdom of Saudi Arabia - a synopsis.

A tin greisen deposit is associated with an alkali-feldspar granite that forms part of a ring complex at Jabal as Silsilah. The petrological and geochemical characteristics of the Fawwarah alkali-feldspar granite resemble those of granites located elsewhere that are also associated with deposits of Sn, W and rare metals. The alkali-feldspar granite is peraluminous, incompatible trace-element-enriched, and is characterized by a flat chondrite-normalized REE pattern that includes a very large, negative Eu anomaly. The distinctive mineralogy of the alkali-feldspar granite includes zinnwaldite and topaz. Differentiation and mineral fractionation controlled magma evolution while components of the ring complex were sequentially emplaced. Evolution of the ring complex and its associated tin deposit concluded with local, intense alteration of the Fawwarah alkali-feldspar granite to a cassiterite-bearing greisen. Samples of greisens suggest that the locus of economic tin deposits is not restricted to the two known, strongly mineralized greisens.-J.A.Z.

American Mineralogist↗

TRENDS IN BOREHOLE GEOPHYSICS FOR MINERAL EXPLORATION: ASSAYING AND REMOTE DETECTION.

Several borehole geophysical techniques have been developed in recent years. Assaying technique development has been concentrated on nuclear methods, with some progress being made on using electrical and magnetic properties for mineral identification. Adaptation of conventional surface geophysical techniques to the borehole for locating near-misses of mineralized zones has led to the development of borehole resistivity, electromagnetic (EM), gravity and magnetic methods to the borehole environment. This paper discusses some of the applications and pitfalls of these new techniques.

Conference Paper↗

REMOTE-SENSING MINERAL DISCOVERIES IN THE MOJAVE DESERT OF CALIFORNIA.

As a result of remote sensing studies in the Mojave Desert of California three previously unknown stockwork molybdenum systems have been discovered. It is not known if economic deposits of molybdenum and associated minerals occur in these areas; there is, however, sufficient data to judge that these areas are worthy of further exploration. The purpose of this paper is to present case histories of two of these discoveries. These discoveries have been made from laboratory analyses of Landsat multispectral scanner images to map limonitic materials and from field reconnaissance to determine if the limonite is due to hydrothermal alteration. In those areas that seemed most promising, airborne spectrometer surveys were employed to mapped Al-OH minerals, and audio-magnetotelluric (AMT) and telluric-traversing surveys were performed to obtain information at depth.

Conference Paper↗

Mineralogical studies of the nitrate deposits of Chile. V. Iquiqueite, Na4K3Mg(CrO4)B24O39(OH).12H2O, a new saline mineral.

Iquiqueite (Na4K3Mg(CrO4)B24O39(OH).12H2O, a 11.6369(14), c 30.158(7) A, P31c, Z = 3) occurs as a widespread minor constituent in the nitrate fields of northern Chile. It is particularly abundant in the vicinity of Zapiga, Tarapaca province. Associated minerals include nitratite, halite, nitre, darapskite, blodite, glauberite, dietzeite, bruggenite, ulexite and gypsum. Iquiqueite forms thin, yellow, hexagonal platelets (5-50 mu m in diameter, <5 mu m in thickness) that are disseminated singly or in vermiform aggregates in nitrate ore. Observed forms are c(0001) and m(1010). Cleavage is perfect on (0001) and imperfect on (1010); H. = or <2. D(calc.) 2.05 g/cm3 and measured sp. gr. 2.05 + or - 0.09. The mineral is uniaxial negative, epsilon 1.447(2), omega 1.502(2). The XRD pattern has the six strongest lines 3.02(100), 2.856(100), 10.11(85), 6.04(85), 3.28(85), 3.22(85) A. The name is for the city of Iquique, Chile.-J.A.Z.

American Mineralogist↗

Emerald mineralization and metasomatism of amphibolite, khaltaro granitic pegmatite - Hydrothermal vein system, Haramosh Mountains, Northern Pakistan

Emerald mineralization is found within 0.1- to 1-m-thick hydrothermal veins and granitic pegmatites cutting amphibolite within the Nanga Parbat - Haramosh massif, in northern Pakistan. The amphibolite forms a sill-like body within garnet-mica schist, and both are part of a regional layered gneiss unit of Proterozoic (?) age. The 40Ar/39Ar data for muscovite from a pegmatite yield a plateau age of 9.13 ?? 0.04 Ma. Muscovite from mica schist and hornblende from amphibolite yield disturbed spectra with interpreted ages of 9 to 10 Ma and more than 225 Ma, respectively, which indicate that peak Tertiary metamorphism reached 325 to 550??C prior to 10 Ma. Pegmatites were emplaced after peak metamorphism during this interval and are older than pegmatites farther south in the massif. At Khaltaro, simply zoned albite-rich miarolitic pegmatites and hydrothermal veins containing various proportions of quartz, albite, tourmaline, muscovite, and beryl are associated with a 1- to 3-m-thick heterogeneous leucogranite sill, that is locally albitized. The pegmatites likely crystallized at 650 to 600??C at pressures of less than 2 kbar. Crystals of emerald form within thin (<30 cm) veins of quartz and tourmaline-albite, and more rarely in pegmatite, near the contacts with altered amphibolite. The emerald-green coloration is produced by Cr and Fe. The Cr and total Fe contents, expressed as Cr2O3 and Fe2O3, respectively, decrease systematically from emerald (>0.20, 0.54-0.89 wt%), to pale blue beryl (<0.07, 0.10-0.63%), to colorless beryl (<0.07, 0.07-0.28%). The amphibolite is metasomatized in less than 20-cm-wide selvages that are symmetrically zoned around veins or pegmatites. A sporadic inner zone containing F-rich biotite, tourmaline, and fluorite, with local albite, muscovite, quartz, and rare beryl, gives way to an intermediate zone containing biotite and fluorite with local plagioclase and quartz, and to an outer zone of amphibolite containing sparse biotite and local quartz. The inner and intermediate zones experienced gains of K, H, F, B, Li, Rb, Cs, Be, Ta, Nb, As, Y and Sr, and losses of Si, Mg, Ca, Fe, Cr, V and Sc. The outer alteration zone has gained F, Li, Rb, Cs, and As. Oxygen isotope analyses of igneous and hydrothermal minerals indicate that a single fluid of magmatic origin with ??18OH2O = 8??? produced the pegmatite-vein system and hydrothermal alteration at temperatures between 550 and 400??C. The formation of emerald results from introduction of HF-rich magmatic-hydrothermal fluids into the amphibolite, which caused hydrogen ion metasomatism and released Cr and Fe into the pegmatite-vein system.

Canadian Mineralogist↗

Phosphovanadylite: a new vanadium phosphate mineral with a zeolite-type structure

Phosphovanadylite, whose simplified formula is (Ba,Ca,K,Na)x([(Va,Al)4P2(P,OH)16].12H2), is a new vanadium phosphate zeolite mineral found in the Phosphoria Formation at Monsanto's Enoch Valley Mine, Soda Springs, Idaho. Its formula in more detail is (Ba0.38Ca0.20K0.006Na0.02)??0.66 [P2(V3.44Al0.046)??3.90O10.34(OH)5.66] .12H2O. The drusy mineral occurs as pale greenish-blue euhedral cubes (20-50 ??m edge) coating phosphatic, organic-rich mudstone. The chemical composition determined by electron microprobe is (in weight percent) V-28.02, P-9.91, Al-1.97, Ca-1.31, Ba-8.28, Cd-0.09, Zn-0.34, Na-0.15, K-0.73, O-46.57, and F-0.03. The index of refraction is nD = 1.566 (4) and specific gravity is 2.16 (3). The X-ray powder pattern shows strong reflections at 3.16 A (422), 2.58 (600), 2.44 (620), and 7.73 (200), which are indexed on the basis of a cubic body-centered unit cell with a = 15.470 (4) A. From the single-crystal structure analysis, its space group was determined to be I43m, Z = 6, and its structure consists of V4O18 16 octahedral clusters linked to each other by P atoms to form a cubic lattice, creating cavities 7.0 and 5.5 A in diameter where mainly H2O resides. Final residual indexes are R = 0.066, Rw = 0.061, goodness-of-fit = 0.75, and 93 observations and 24 parameters.

American Mineralogist↗

Mineral resources of Peru's ancient societies

Northern Peru has an exceptionally rich archaeological heritage that includes metalwork, ceramics and textiles. The success of at least a half-dozen pre-Columbian societies dating back 3,000 years and subsequent Spanish colonization in the 1400s has rested on the effective use of northern Peru's abundant resources. In the summer of 2000, my son Matt and I learned about that connection firsthand by volunteering at the Santa Rita B archaeological site in the Chao Valley near Trujillo in northern Peru. Riding donkey-back through the Andes and talking with local people, we got our hands dirty in the rich archaeology and geology of the area. We were able to correlate mineral occurrences to their various roles in society - opening a window into the region's fascinating past. From construction to metallurgy, pre-Columbian societies flourished and advanced because of their understanding and use of the available mineral resources.

Geotimes↗

Mineral resource of the month: gypsum

You may not realize it, but the walls of your office are probably made from a mineral: gypsum. Gypsum is an abundant, evaporite-derived sedimentary mineral with deposits located throughout the world. It is often associated with paleoenvironmental lake and marine environments. In its pure form, gypsum consists of calcium sulfate dihydrate, although most crude gypsum naturally occurs in combination with anhydrite, clay, dolomite and/or limestone.

Earth↗

US nonfuel mineral exploration: Selected findings for 1995-2009 from the USGS

The U.S. Geological Survey (USGS) has been systematically monitoring global nonfuel mineral exploration activities to anticipate the location and quantity of future nonfuel minerals supply for about 100 commodities, with an emphasis on precious and base metals. Since 1995, the USGS has developed an annual list of 100 noteworthy prospects that were considered to have a high level of potential for near-term development based on such criteria as intensity of drilling, level of capital investment, and size of resource. This study reviews the status of the U.S. sites included on these lists as of July 2011 and addresses domestic prospects not included on the lists that have come into production since 1995.

Mining Engineering↗

Mineral resource of the month: indium

Geologically, the occurrence of indium minerals is rare. The element most often occurs as a sulfide inclusion or substitutes in other base-metal minerals, including cassiterite, chalcopyrite, sphalerite and stannite. Indium’s abundance in the crust is estimated to be 0.05 parts per million, which makes it more abundant than silver, but it is so widely disseminated that it does not occur in high enough concentrations to form mineable deposits. Therefore, indium is most often recovered from byproduct residues produced during the refining of lead and zinc. But only about one-quarter of the indium mined worldwide is refined into metal, as many indium-bearing concentrates are sent to refineries that do not have the capability of recovering the metal.

Earth↗

Mineral resource of the month: potash

The article offers basic information about the mineral resource potash. According to the author, potash is the generic term for a variety of mined and manufactured salts that contain the mineral potassium in a water-soluble form. The author adds that potash is used in fertilizers, soaps and detergents, glass and ceramics, and alkaline batteries.

Earth↗

Earth mineral resource of the month: asbestos

The article discusses the characteristics and feature of asbestos. According to the author, asbestos is a generic name for six needle-shaped minerals that possess high tensile strengths, flexibility, and resistance to chemical and thermal degradation. These minerals are actinolite, amosite, anthophyllite, chrysolite, crocilodite and tremolite. Asbestos is used for strengthening concrete pipe, plastic components, and gypsum plasters.

Earth↗

Age of volcanism, intrusion, and mineralization in the Thomas Range, Keg Mountain, and Desert Mountain, western Utah

Twenty-six new age determinations by the fission-track method establish a chronology for volcanism, intrusion, and mineralization in the Thomas Range, Keg Mountain, and Desert Mountain, in western Utah. The fission-track ages confirm D. R. Shawe's three-fold classification of igneous rocks. The oldest group of rocks consists of flows, agglomerates, and some ash-flow tuffs that were deposited 38-39 m.y. ago. The middle group contains widespread rhyolitic ash-flow tuffs that originated from local volcanic centers 30-32 m.y. ago. A dike emplaced along the probable ring-fracture zone of the Keg caldera about 31 m.y. ago indicates that caldera collapse occurred soon after eruption of ash-flow tuffs. Rocks believed to belong-to the middle group also were intruded by the quartz monzonite of Desert Mountain 27-30 m.y. ago. Little or no igneous activity took place within the next 20 m.y., during which time the region was strongly broken by Basin-and-Range faulting. Rhyolites of the youngest group were extruded 8-10 m.y. ago in the Keg Mountain area and 6-7 m.y. ago in the Thomas Range. The beryllium-fluorite mineralization at Spor Mountain occurred after the rhyolitic volcanism in the Thomas Range.

Utah↗

Supply of and demand for selected energy related mineral commodities

In this report, subjects discussed include components of mineral supply, production, and consumption data, and information on selected mineral commodities in which the Energy Critical Elements Study Group has an interest, and U.S. Geological Survey (USGS) recycling studies, with some results of these studies.

Conference Paper↗

Mineral resource of the month: Phosphate rock

As a mineral resource, “phosphate rock” is defined as unprocessed ore and processed concentrates that contain some form of apatite, a group of calcium phosphate minerals that is the primary source for phosphorus in phosphate fertilizers, which are vital to agriculture.

Earth↗

Statistical guides to estimating the number of undiscovered mineral deposits: an example with porphyry copper deposits

Estimating numbers of undiscovered mineral deposits is a fundamental part of assessing mineral resources. Some statistical tools can act as guides to low variance, unbiased estimates of the number of deposits. The primary guide is that the estimates must be consistent with the grade and tonnage models. Another statistical guide is the deposit density (i.e., the number of deposits per unit area of permissive rock in well-explored control areas). Preliminary estimates and confidence limits of the number of undiscovered deposits in a tract of given area may be calculated using linear regression and refined using frequency distributions with appropriate parameters. A Poisson distribution leads to estimates having lower relative variances than the regression estimates and implies a random distribution of deposits. Coefficients of variation are used to compare uncertainties of negative binomial, Poisson, or MARK3 empirical distributions that have the same expected number of deposits as the deposit density. Statistical guides presented here allow simple yet robust estimation of the number of undiscovered deposits in permissive terranes.

Conference Paper↗

Evaluation of LANDSAT-1 image applications to geologic mapping, structural analysis and mineral resource inventory of South America with special emphasis on the Andes Mountain region: Type III final report for period January 1973 to July 1974

The author has identified the following significant results. The discovery of copper mineralization along a lineament mapped in Area 7 (La Paz) has lent credence to the use of LANDSAT 1 data as a basic step in mineral exploration. In Area 9 (Copiapo Region), a number of lineaments were found to be associated with the largest copper deposits of the region. In Area 12 (Magallanes), the identification of what is believed to be a tertiary basin from LANDSAT 1 data has resulted in a new area for petroleum exploration. Band 7 images, as black and white transparencies, were found to be the most useful for geologic interpretation in both tropical vegetated areas and desert regions. Color composites made by the diazochrome process, chromaline process, and from color additive viewers provided additional information. Mosaics of LANDSAT 1 data covering 4 x 6 degrees of latitude and longitude compiled at the 1:1,000,000 scale were found to be an ideal size and format for most users.

Araqua, Belo Horizonte, Copiapo, La Paz, Magallane↗