Geology topics

Minerals & deposits

Find USGS publications on mineral resources and deposits. Search commodities and geographic names, then check source reports for geology and assessment methods.

Follow this topic with RSS

At least 1,333 records · Page 74Linked to original sources

USGS1999

Land and federal mineral ownership coverage for southern Wyoming

This Arc/Info coverage contains land status and Federal mineral ownership for approximately 37,800 square miles in southern Wyoming. The polygon coverage (which is also provided here as a shapefile) contains two attributes of ownership information for each polygon. One attribute indicates where the surface is State owned, privately owned, or, if Federally owned, which Federal agency manages the land surface. The other attribute indicates which minerals, if any, are owned by the Federal govenment. This coverage is based on land status and Federal mineral ownership data compiled by the U.S. Geological Survey (USGS) and the Wyoming State Bureau of Land Management (BLM) at a scale of 1:24,000. This coverage was compiled primarily to serve the USGS National Oil and Gas Resource Assessment and National Coal Resource Assessment Projects in the Northern Rocky Mountains/Great Plains Region.

Wyoming↗

USGS1999

Geochemical data for stream-sediment, heavy-mineral-concentrate, and rock samples collected from the Fortyseven Creek gold-arsenic-antimony-tungsten prospect, southwestern Alaska

In the summer of 1991, we conducted a reconnaissance geochemical survey around the Fortyseven Creek Au-As-Sb-W prospect that is located in the southwestern part of the Sleetmute quadrangle. At that time, this project was a small part of a more comprehensive Alaska Mineral Resource Assessment Program (AMRAP) study of the Sleemute quadrangle. AMRAP studies were conducted by the U.S. Geological Survey (USGS) to fulfill requirements of the Alaska National Interests Lands Conservation Act (Public Law 96-487, 1980) to survey certain federal lands to determine their mineral potential. Although AMRAP is no longer in operation, this study represents a small topical study that was conducted during the Sleetmute quadrangle AMRAP study. The objective of the Fortyseven Creek work was to characterize the geochemistry of samples collected downstream from the Fortyseven Creek prospect, as well as mineralized and altered rock samples collected from the prospect. In this report, we describe the samples collected in 1991, the methods used for the analysis of the samples, and the geochemical data for these samples. The data in this report are also available in digital form on computer diskette in Gray and others (1999). An interpretation of these data appears in Gray and others (1998).

Alaska↗

USGS2017

Environmental considerations related to mining of nonfuel minerals

Throughout most of human history, environmental stewardship during mining has not been a priority partly because of the lack of applicable laws and regulations and partly because of ignorance about the effects that mining can have on the environment. In the United States, the National Environmental Policy Act of 1969, in conjunction with related laws, codified a more modern approach to mining, including the responsibility for environmental stewardship, and provided a framework for incorporating environmental protection into mine planning. Today, similar frameworks are in place in the other developed countries of the world, and international mining companies generally follow similar procedures wherever they work in the world. The regulatory guidance has fostered an international effort among all stakeholders to identify best practices for environmental stewardship. The modern approach to mining using best practices involves the following: (a) establishment of a pre-mining baseline from which to monitor environmental effects during mining and help establish geologically reasonable closure goals; (b) identification of environmental risks related to mining through standardized approaches; and (c) formulation of an environmental closure plan before the start of mining. A key aspect of identifying the environmental risks and mitigating those risks is understanding how the risks vary from one deposit type to another—a concept that forms the basis for geoenvironmental mineral-deposit models. Accompanying the quest for best practices is the goal of making mining sustainable into the future. Sustainable mine development is generally considered to be development that meets the needs of the present generation without compromising the ability of future generations to meet their own needs. The concept extends beyond the availability of nonrenewable mineral commodities and includes the environmental and social effects of mine development. Global population growth, meanwhile, has decreased the percentage of inhabitable land available to support society’s material needs. Presently, the land area available to supply the mineral resources, energy resources, water, food, shelter, and waste disposal needs of all Earth’s inhabitants is estimated to be 135 square meters per person. Continued global population growth will only increase the challenges of sustainable mining. Current trends in mining are also expected to lead to new environmental challenges in the future, among which are mine-waste management issues related to mining larger deposits for lower ore grade; water-management issues related to both the mining of larger deposits and the changes in precipitation brought about by climate change; and greenhouse gas issues related to reducing the carbon footprint of larger, more energy-intensive mining operations.

Professional Paper↗

USGS2007

Surface-water, ground-water, and sediment geochemistry of epizonal and shear-hosted mineral deposits in the Tintina Gold Province--Arsenic and antimony distribution and mobility

Epigenetic mineral deposits in the Tintina Gold Province are generally characterized by high concentrations of arsenic and antimony in their mineral assemblage. A total of 347 samples (ground water, surface water, and stream sediment) were collected to investigate the distribution and mobility of arsenic and antimony in the environment near known mineral deposits. Samples were collected from east to west at Keno Hill and Brewery Creek, Yukon, Canada; and Cleary Hill, True North, Scrafford Mine, Fairbanks, Ryan Lode, Stampede Creek, Slate Creek, and Donlin Creek, all in Alaska. Surface- and ground-water samples are all slightly acidic to near-neutral in pH (5-8), have a wide range in specific conductance (surface water 17-2,980 microsiemens per centimeter and ground water 170-2,940 microsiemens per centimeter), and show elevated dissolved arsenic and antimony concentrations (arsenic in surface water is less than 1 to 380 micrograms per liter and in ground water is less than 1 micrograms per liter to 1.5 milligrams per liter; antimony in surface water is less than 2 to 660 micrograms per liter and in ground water is less than 2 to 60 micrograms per liter). Stream sediments downstream from these deposits have high concentrations of arsenic and antimony (arsenic median is 1,670 parts per million, maximum is 10,000 parts per million; antimony median is 192 parts per million, maximum is 7,200 parts per million). The mobility of arsenic and antimony is controlled by the local redox environment, with arsenic being less mobile in oxidized surface waters relative to antimony, and arsenic more mobile in reduced ground water. These factors suggest that both antimony and arsenic may be useful pathfinder elements in water and sediment for targeting similar style deposits elsewhere in the Tintina Gold Province.

Alaska, Yukon↗

USGS2014

A geologic and mineral exploration spatial database for the Stillwater Complex, Montana

The Stillwater Complex is a Neoarchean, ultramafic to mafic layered intrusion exposed in the Beartooth Mountains in south-central Montana. This igneous intrusion contains magmatic mineralization that is variably enriched in strategic and critical commodities such as chromium, nickel, and the platinum-group elements. One deposit, the J-M Reef, is the sole source of primary production and reserves for platinum-group elements in the United States. A large amount of information has been collected on the Stillwater Complex. In the 1930s, academics, the U.S. Geological Survey, and the [U.S.] Bureau of Mines initiated geologic investigations on the Stillwater Complex. Since that time, more than 600 publications on the Stillwater Complex have appeared in the scientific literature. Exploration and mining companies have collected even more information since the 1920s. This report provides essential spatially referenced datasets based on geologic mapping and mineral exploration activities conducted from the 1920s to the 1990s. This information will facilitate research on the complex and provide background material needed to explore for mineral resources and to develop sound land-management policy.

Montana↗

USGS2019

Effect of size-biased sampling on resource predictions from the three-part method for quantitative mineral resource assessment—A case study of the gold mines in the Timmins-Kirkland Lake area of the Abitibi greenstone belt, Canada:

The three-part method for quantitative mineral resource assessment is used by the U.S. Geological Survey to predict, within a specified assessment area, the number of undiscovered mineral deposits and the quantity of mineral resources in those undiscovered deposits. The effects of size-biased sampling on such predictions are evaluated in a case study that involves gold mines from the Timmins-Kirkland Lake area of the Abitibi greenstone belt, Canada. The gold mines are divided, based upon the time of the assessment, into two groups: existing mines and future mines. The total produced gold for the existing mines are used to predict, with the three-part method, the total produced gold for the future mines. Then the predictions are compared to the known, total produced gold for the future mines. For comparisons using the mean, the predictions are 1.6 to 12 times too high, depending upon the time of the assessment and the probability density function characterizing the total produced gold in the existing mines. For comparisons using the median, the predictions are 1.3 to 10 times too high, depending upon the time of the assessment. The reason for these excessively high predictions is that the three-part method is based on the assumption that the total produced gold from the existing mines is representative of the total produced gold in the future mines; this assumption is inappropriate because of size-biased sampling. There is reason to be concerned that size-biased sampling adversely affected the resource predictions of previous U.S. Geological Survey assessments that were conducted with the three-part method.

Ontario Province, Quebec Province↗

USGS2025

World minerals outlook—Cobalt, gallium, helium, lithium, magnesium, palladium, platinum, and titanium through 2029

Given the rapid expansion in the demand for mineral commodities that underpin worldwide economic growth and technological advancement, information regarding expected country-level mine production and production capacity is becoming increasingly important to industry stakeholders, end users, and policymakers. Production capacity can limit future supply, depending on how rapidly that capacity is able to expand. Current capacity can be evaluated on the basis of past production. Decreases to future capacity can be taken into account from announcements of planned shutdowns of mines or processing facilities, which are frequently publicized well in advance of such closures. Likewise, capacity expansions, which usually involve multiple stages—such as permitting, financing, and construction (all of which take time)—can also be estimated. As such, it is possible to evaluate midterm future capacity based on estimates of today’s capacities along with consideration of future investment plans. This World Minerals Outlook provides estimated capacities for cobalt, gallium, helium, lithium, magnesium, palladium, platinum, and titanium for 2025 through 2029. The results of this analysis indicate that two mineral commodities important to the manufacture of lithium-ion batteries—cobalt and lithium—are expected to have large capacity growth in the next few years, likely owing to expectations for increased demand for these batteries. For gallium, helium, palladium, and platinum, capacity is expected to remain stable or exhibit moderate growth. Still, these expected capacity levels are higher than current production, allowing for future production growth. The production capacity outlook is opaque for magnesium and titanium metal, which have a significant fraction of current production in nonmarket economies, such as China and Russia. Ultimately, though, where free market conditions prevail, full utilization of capacity potential for those commodities is likely to depend on supply deficits and prices that are above production costs.

Scientific Investigations Report↗

USGS1988

Water resources of Miner County, South Dakota

Miner County is a rural agricultural area of 572 sq mi in east-central South Dakota. All streams in the county are intermittent and usually are recharged only from spring snowmelt and precipitation. Most ponds and sloughs may go dry in summer and during drought conditions, while larger lakes and ponds will contain water year round. Three major confined glacial aquifers underlie Miner County. The Floyd aquifer, buried beneath 25-150 ft of glacial drift, ranges from 10-100 ft in thickness. Water levels in the Floyd range from flowing to 56 ft below land surface. Properly constructed wells in the aquifer may produce as much as 1,200 gal/min. The Floyd aquifer offers the greatest potential for irrigation or other large yield development. Predominant chemical constituents in water from the Floyd aquifer are sodium, calcium and sulfate; however, there is a wide variation in the chemical composition of the water. For the most part it is suitable for irrigation. The Howard aquifer, is buried beneath 80-350 ft of glacial drift and ranges from 4-170 ft in thickness. Water levels in the Howard aquifer range from 16-200 ft below land surface. The Ramona aquifer underlies about 70 sq mi and is buried beneath 25-170 ft of glacial drift and ranges from 4-32 ft in thickness. Water levels in the Ramona range from 10-105 ft below land surface. Four bedrock aquifers underlie Miner County. The uppermost aquifer is the Niobrara Formation, buried by 60-600 ft of Pierre Shale and/or glacial drift with a thickness ranging from 10-120 ft. Water levels in the aquifer range from 6 ft above land surface to 200 ft below land surface. The Codell Sandstone Member of the Carlile Shale which underlies the Niobrara Formation is at depths ranging from 120-720 ft below land surface. It ranges from 10-120 ft in thickness. Water levels in the Codell aquifer range from flowing at land surface to 235 ft below land surface. Water from the aquifer generally is not suitable for irrigation. The Dakota Formation is buried by 400-1,000 ft of bedrock and glacial drift and is separated from the Codell aquifer by overlying carbonate rock and shale. The Dakota aquifer ranges from 10-400 ft in thickness. Water levels in the aquifer range from 25 ft above land surface to 260 ft below land surface. Water from the aquifer generally is not suitable for irrigation. (Lantz-PTT)

Water-Resources Investigations Report↗

USGS2023

Beyond conductive targets: Characterizing lithium-prospective lacustrine evaporite mineral systems of North America’s Basin and Range Province with regional-scale AEM

The Basin and Range province of North America hosts substantial lacustrine evaporite mineral systems prospective for lithium, a critical mineral currently listed for mineral resource assessment by the U.S. Geological Survey. Airborne electromagnetic (AEM) surveys are being conducted to support these assessments by identifying shallow clays and brines, as well as through improving the shallow subsurface geologic framework of the regional fluid flow system. In 2022-2023, three focus areas with proven lithium resources or considered highly prospective for lithium are being surveyed. Results from this effort can help to improve our understanding of the geologic conditions and geophysical signatures associated with known resource regions and benefit future lithium resource assessments by identifying regions with similar geophysical and geologic characteristics.

Arizona, California, Idaho, Nevada, Oregon, Utah↗

USGS1981

Physical factors that could restrict mineral supply

Stages in the metal supply process are affected by each of the following physical (geologic) factors: (1) geographic distribution of concentrations of potential ore minerals, (2) depth of these concentrations, (3) mineralogy, (4) grain size of the minerals, and (5) grade and (6) tonnages of the concentrations. For mineral deposits of each type in each geologic and political environment, the lowest cost metal will tend to be produced first because: (1) the largest deposits tend to be found first, (2) the few largest deposits should reap the benefits of economies of scale and will tend to account for the lion’s share of total metal, (3) higher grade deposits that require substantially less energy per ton of metal than do lower grade deposits will be mined first, and (4) deposits that have the mineralogy and grain sizes that are relatively cheap to process will be produced first. Shallow deposits that are relatively cheap to find and mine and deposits near existing infrastructure will also be produced first. Because stages in the supply process are sequential, problems at any stage caused by the physical factors are reflected in subsequent stages and adversely affect production costs. In the long term, effects of such problems will be not physical shortages of metals but a rapid or persistent increase in real prices of metals.

Economic Geology↗

USGS1951

Fluorometric determination of zirconium in minerals

The increasing use of zirconium in alloys and in the ceramics industry has created renewed interest in methods for its determination. It is a common constituent of many minerals, but is usually present in very small amounts. Published methods tend to be tedious, time-consuming, and uncertain as to accuracy. A new fluorometric procedure, which overcomes these objections to a large extent, is based on the blue fluorescence given by zirconium and flavonol in sulfuric acid solution. Hafnium is the only element that interferes. The sample is fused with borax glass and sodium carbonate and extracted with water. The residue is dissolved in sulfuric acid, made alkaline with sodium hydroxide to separate aluminum, and filtered. The precipitate is dissolved in sulfuric acid and electrolysed in a Melaven cell to remove iron. Flavonol is then added and the fluorescence intensity is measured with a photo-fluorometer. Analysis of seven standard mineral samples shows excellent results. The method is especially useful for minerals containing less than 0.25% zirconium oxide.

Analytical Chemistry↗

USGS1984

LASER MICROPROBE 40Ar/39Ar DATING OF MINERAL GRAINS IN SITU.

A laser-microprobe attached to a mass spectrometer for **4**0Ar/**3**9Ar age determination of single mineral grains in geological materials has been made operational at the US Geological Survey, Reston, VA. This microanalytical technique involves focusing a pulsed laser beam onto a sample contained in an ultra-high vacuum chamber attached to a rare-gas mass spectrometer. Argon in the neutron-irradiated sample is released by heating with the laser pulse and its isotopic composition is measured to yield an **4**0Ar/**3**9Ar age. Laser probe **4**0Ar/**3**9Ar ages of single mineral grains measured in situ can aid greatly in understanding the chronology of many geological situations where datable minerals are present but are not physically separable in quantities needed for conventional age dating.

Scanning Electron Microscopy↗

USGS1985

DISTRIBUTION OF TRACE ELEMENTS IN COAL MINERALS OF SELECTED EASTERN UNITED STATES COALS.

The association of 34 elements with minerals found in coal was determined by a combination of analytical techniques on size and density fractions of low-temperature ash (LTA). Instrumental neutron activation analysis was used to determine the concentrations of the elements, and X-ray diffraction analysis, scanning electron microscopy, and scanning transmission electron microscopy were used to identify the minerals present in the LTA. The distribution of elemental and mineral concentrations in different size fractions was also determined. Between 35 and 60 weight percent of the LTA was composed of particles smaller than 2 mu m.

Conference Paper↗

USGS1985

MARINE MINERAL RESOURCES - AN UPDATE AND INTRODUCTION.

This article briefly traces the status of marine minerals development, and it describes papers presented in this special issue on the subject. Subjects covered include types of deposits, marine mining in Canada, Manganese nodules, metalliferous sulfides as seabed minerals, metallurgical processes for reducing sulfide minerals, U. S. phosphate industry, construction materials and placers, and industry problems.

Marine Technology Society Journal↗

USGS1984

U. S. GEOLOGICAL SURVEY MARINE-MINERALS RESEARCH.

Summary form only given. The US Exclusive Economic Zone is an area approximately one and two-thirds the size of the land area of the United States. In this frontier area, US Geological Survey (USGS) research in marine minerals is aimed at three objectives: (1) defining geologic settings of potential mineral resources; (2) understanding the processes by which seafloor nonliving resources form; and (3) estimating the resource potential. Potential resources of primary interest are cobalt-rich manganese seafloor crusts, polymetallic sulfides in hydrothermal vent areas on the seafloor, and heavy-mineral placer deposits. Research activities include studies of manganese-crust samples from oceanographic-institution archives and a USGS research cruise through the central and southern Pacific. Preliminary results confirm that cobalt is concentrated by as much as 2. 5% in the manganese crusts at water depths of 1000-2600 m; further research on the precipitation processes and patterns of crust formation will be needed to understand the origin, occurrence patterns, and resource potential of these crusts. Research cruises have revealed a zone of polymetallic sulfide vent deposits a few hundred meters long in the Juan de Fuca spreading center.

Conference Paper↗

USGS1984

NONFUEL MINERAL RESOURCES OF THE PACIFIC EXCLUSIVE ECONOMIC ZONE.

The Pacific Exclusive Economic Zone contains a variety of hard mineral resources. Sand and gravel and their associated placer deposits of heavy minerals are the most likely to be developed in the near future, but offshore and deep water deposits of phosphorite, abyssal manganese nodules, ferromanganese crusts enriched in cobalt, and massive sulfide deposits all represent future resources. The distribution, extent, and formation of these deposits are poorly understood and will be clarified only with additional exploration, framework geologic mapping, and study of the processes by which these resources form. It is pointed out that the initial discovery of most hard-mineral resources in the EEZ was made during routine scientific marine-geologic surveys aimed at understanding the framework geology and geologic processes of an offshore region.

Conference Paper↗

USGS1984

Mineral resources of the Atlantic Exclusive Economic Zone

Potential mineral resources of the Atlantic Exclusive Economic Zone (including the Gulf of Mexico and US Caribbean areas) include petroleum, sand and gravel, phosphorite, placer deposits of heavy mineral sands, ferromanganese nodules, and fresh water. Although major efforts have been made to search for petroleum, the oil and gas resources of the region are well known only in the western Gulf Shelf and more exploration is under way. Heavy-mineral placer deposits, which may be sources of titanium, gold, rare earths, etc. , have been sampled, but the extent and, therefore, economic value of the deposits have not been identified. Sand and gravel, phosphorite, and ferromanganese nodules all are represented by fairly well established deposits, and only modified market conditions would be necessary to cause detailed exploration and mining.

Conference Paper↗

USGS1987

LEAD, TIN, AND PRECIOUS-METAL MINERALIZATION IN THE U. S. VIRGIN ISLANDS.

This regional geochemical study of the U. S. Virgin Islands demonstrates the presence of a widespread base-metal (primarily Pb, Sn, Cu) and precious-metal (primarily Ag) mineralization on all three of the islands. The overall association: Au, Ag, Te, Sn, Pb, Cu, Zn, Sb, Bi, Mo, As and Ba shows a great similarity to that of the Bolivian silver-tin district. The single divergence from the Bolivian association is tungsten, which is totally lacking in the U. S. Virgin Islands. The delineated geochemical patterns transect all exposed rock types on the islands, including the Kingshill Marl of late Miocene age, on St. Croix. Some relationship between the geochemical patterns and the major mapped faults can be seen - especially on St. Croix. K-Ar age dating of rocks from St. Thomas and St. John indicates that they are of Tertiary rather than Cretaceous age. This and the apparent contemporaneity of the mineralization with the St. Croix graben infilling indicate a very late Miocene age for the mineralization.

Conference Paper↗