USGS Science⌕ Search

Geology topics

Minerals & deposits

Find USGS publications on mineral resources and deposits. Search commodities and geographic names, then check source reports for geology and assessment methods.

At least 577 records · Page 32Linked to original sources

Mineral commodity summaries 2014

Each chapter of the 2014 edition of the U.S. Geological Survey (USGS) Mineral Commodity Summaries (MCS) includes information on events, trends, and issues for each mineral commodity as well as discussions and tabular presentations on domestic industry structure, Government programs, tariffs, 5-year salient statistics, and world production and resources. The MCS is the earliest comprehensive source of 2013 mineral production data for the world. More than 90 individual minerals and materials are covered by two-page synopses. For mineral commodities for which there is a Government stockpile, detailed information concerning the stockpile status is included in the two-page synopsis. Abbreviations and units of measure, and definitions of selected terms used in the report, are in Appendix A and Appendix B, respectively. “Appendix C—Reserves and Resources” includes “Part A—Resource/Reserve Classification for Minerals” and “Part B—Sources of Reserves Data.” A directory of USGS minerals information country specialists and their responsibilities is Appendix D. The USGS continually strives to improve the value of its publications to users. Constructive comments and suggestions by readers of the MCS 2014 are welcomed.

Mineral Commodity Summaries↗

Mineral commodity summaries 2015

Each chapter of the 2015 edition of the U.S. Geological Survey (USGS) Mineral Commodity Summaries (MCS) includes information on events, trends, and issues for each mineral commodity as well as discussions and tabular presentations on domestic industry structure, Government programs, tariffs, 5-year salient statistics, and world production and resources. The MCS is the earliest comprehensive source of 2014 mineral production data for the world. More than 90 individual minerals and materials are covered by two-page synopses. For mineral commodities for which there is a Government stockpile, detailed information concerning the stockpile status is included in the two-page synopsis. Abbreviations and units of measure, and definitions of selected terms used in the report, are in Appendix A and Appendix B, respectively. "Appendix C—Reserves and Resources” includes “Part A—Resource/Reserve Classification for Minerals” and “Part B—Sources of Reserves Data." A directory of USGS minerals information country specialists and their responsibilities is Appendix D. The USGS continually strives to improve the value of its publications to users. Constructive comments and suggestions by readers of the MCS 2015 are welcomed.

Mineral Commodity Summaries↗

Mineral commodity summaries 2024

Each mineral commodity chapter of the 2024 edition of the U.S. Geological Survey (USGS) Mineral Commodity Summaries (MCS) includes information on events, trends, and issues for each mineral commodity as well as discussions and tabular presentations on domestic industry structure, Government programs, tariffs, 5-year salient statistics, and world production, reserves, and resources. The MCS is the earliest comprehensive source of 2023 mineral production data for the world. More than 90 individual minerals and materials are covered by 2-page synopses. Abbreviations and units of measure and definitions of selected terms used in the report are in Appendix A and Appendix B, respectively. Reserves and resources information is in Appendix C, which includes “Part A—Resource and Reserve Classification for Minerals” and “Part B—Sources of Reserves Data.” A directory of USGS minerals information country specialists and their responsibilities is in Appendix D. The USGS continually strives to improve the value of its publications to users. Constructive comments and suggestions by readers of the MCS 2024 are welcomed.

Mineral Commodity Summaries↗

Mineral commodity summaries 2025

Introduction Each mineral commodity chapter of the 2025 edition of the U.S. Geological Survey (USGS) Mineral Commodity Summaries (MCS) includes information on events, trends, and issues for each mineral commodity as well as discussions and tabular presentations on domestic industry structure, Government programs, tariffs, 5-year salient statistics, and world production, reserves, and resources. The MCS is the earliest comprehensive source of 2024 mineral production data for the world. More than 90 individual minerals and materials are covered by two-page synopses. Abbreviations and units of measure and definitions of selected terms used in the report are in Appendix A and Appendix B, respectively. Reserves and resources information is in Appendix C, which includes “Part A—Resource and Reserve Classification for Minerals” and “Part B—Sources of Reserves Data.” A directory of USGS minerals information country specialists and their responsibilities is in Appendix D. The USGS continually strives to improve the value of its publications to users. Constructive comments and suggestions by readers of the MCS 2025 are welcomed.

Mineral Commodity Summaries↗

Mineral commodity summaries 2026

Introduction Each mineral commodity chapter of the 2026 edition of the U.S. Geological Survey (USGS) Mineral Commodity Summaries (MCS) includes information on events, trends, and issues for each mineral commodity as well as discussions and tabular presentations on domestic industry structure, Government programs, tariffs, 5-year salient statistics, and world production, reserves, and resources. The MCS is the earliest comprehensive source of 2025 mineral production data for the world. More than 90 individual minerals and materials are covered by two-page synopses. Abbreviations and units of measure and definitions of selected terms used in the report are in Appendix A and Appendix B, respectively. Reserves and resources information is in Appendix C, which includes “Part A—Resource and Reserve Classification for Minerals” and “Part B—Sources of Reserves Data.” A directory of USGS minerals information country specialists and their responsibilities is in Appendix D. The USGS continually strives to improve the value of its publications to users. Constructive comments and suggestions by readers of the 2026 MCS are welcomed.

Mineral Commodity Summaries↗

Mineral Commodity Summaries 2012

Each chapter of the 2012 edition of the U.S. Geological Survey (USGS) Mineral Commodity Summaries (MCS) includes information on events, trends, and issues for each mineral commodity as well as discussions and tabular presentations on domestic industry structure, Government programs, tariffs, 5-year salient statistics, and world production and resources. The MCS is the earliest comprehensive source of 2011 mineral production data for the world. More than 90 individual minerals and materials are covered by 2-page synopses. For mineral commodities for which there is a Government stockpile, detailed information concerning the stockpile status is included in the two-page synopsis. Abbreviations and units of measure, and definitions of selected terms used in the report, are in Appendix A and Appendix B, respectively. "Appendix C—Reserves and Resources" includes "Part A—Resource/Reserve Classification for Minerals" and "Part B—Sources of Reserves Data." A directory of USGS minerals information country specialists and their responsibilities is Appendix D. The USGS continually strives to improve the value of its publications to users. Constructive comments and suggestions by readers of the MCS 2012 are welcomed.

Mineral Commodity Summaries↗

Mineral commodity summaries 2013

Each chapter of the 2013 edition of the U.S. Geological Survey (USGS) Mineral Commodity Summaries (MCS) includes information on events, trends, and issues for each mineral commodity as well as discussions and tabular presentations on domestic industry structure, Government programs, tariffs, 5-year salient statistics, and world production and resources. The MCS is the earliest comprehensive source of 2012 mineral production data for the world. More than 90 individual minerals and materials are covered by two-page synopses. For mineral commodities for which there is a Government stockpile, detailed information concerning the stockpile status is included in the two-page synopsis. Abbreviations and units of measure, and definitions of selected terms used in the report, are in Appendix A and Appendix B, respectively. “Appendix C—Reserves and Resources” includes “Part A—Resource/Reserve Classification for Minerals” and “Part B—Sources of Reserves Data.” A directory of USGS minerals information country specialists and their responsibilities is Appendix D. The USGS continually strives to improve the value of its publications to users. Constructive comments and suggestions by readers of the MCS 2013 are welcomed.

Mineral Commodity Summaries↗

Assessing the solubilities and reaction kinetics of aluminous minerals in soils

The use of chemical thermodynamics and reaction kinetics is necessary to quantitatively model the transformation of aluminous minerals and their dissolved constituents in soils and other geochemical systems. Soils are thermodynamically open systems subject to atmospheric and biological forces and do not attain overall thermodynamic equilibrium with respect to either mass or time. However, local or partial equilibrium conditions may persist for particular minerals and their dissolved constituents. Igneous and metamorphic primary minerals break down chemically to yield disordered gels or colloids and constituent ions, which can then reorganize or precipitate to form more stable hydrous oxides, silicates, carbonates or other mineral species. Naturally-occurring iron and aluminum hydrous oxides and kaolin clays, abundant in highly weathered soils, are commonly believed to be the ultimate, stable end products of weathering reactions, but usually are thermodynamically metastable with respect to more perfectly ordered, synthetic specimens. Thermodynamic stability is no guaranty of mineral persistence; with sufficient time, even the most perfectly crystallized, stable mineral will yield to the solubilizing assault of undersaturated surface waters. All of the dissolution and precipitation reactions of soil minerals are driven by energy differences in the thermodynamic stabilities of reactants and products, and the velocities (or kinetics) of such reactions are regulated by variables of the hydrogeochemical environment.

Book chapter↗

Trace element abundances in major minerals of Late Permian coals from southwestern Guizhou province, China

Fourteen samples of minerals were separated by handpicking from Late Permian coals in southwestern Guizhou province, China. These 14 minerals were nodular pyrite, massive recrystallized pyrite, pyrite deposited from low-temperature hydrothermal fluid and from ground water; clay minerals; and calcite deposited from low-temperature hydrothermal fluid and from ground water. The mineralogy, elemental composition, and distribution of 33 elements in these samples were studied by optical microscopy, scanning electron microscope equipped with energy-dispersive X-ray spectrometer (SEM-EDX), X-ray diffraction (XRD), cold-vapor atomic absorption spectrometry (CV-AAS), atomic fluorescence spectrometry (AFS), inductively coupled-plasma mass spectrometry (ICP-MS), and ion-selective electrode (ISE). The results show that various minerals in coal contain variable amounts of trace elements. Clay minerals have high concentrations of Ba, Be, Cs, F, Ga, Nb, Rb, Th, U, and Zr. Quartz has little contribution to the concentration of trace elements in bulk coal. Arsenic, Mn, and Sr are in high concentrations in calcite. Pyrite has high concentrations of As, Cd, Hg, Mo, Sb, Se, Tl, and Zn. Different genetic types of calcite in coal can accumulate different trace elements; for example Ba, Co, Cr, Hg, Ni, Rb, Sn, Sr, and Zn are in higher concentrations in calcite deposited from low-temperature hydrothermal fluid than in that deposited from ground water. Furthermore, the concentrations of some trace elements are quite variable in pyrite; different genetic types of pyrites (Py-A, B, C, D) have different concentrations of trace elements, and the concentrations of trace elements are also different in pyrite of low-temperature hydrothermal origin collected from different locations. The study shows that elemental concentration is rather uniform in a pyrite vein. There are many micron and submicron mosaic pyrites in a pyrite vein, which is enriched in some trace elements, such as As and Mo. The content of trace element in pyrite vein depends upon the content of mosaic pyrite and of trace elements in it. Many environmentally sensitive trace elements are mainly contained in the minerals in coal, and hence the physical coal cleaning techniques can remove minerals from coal and decrease the emissions of potentially hazardous trace elements. ?? 2002 Elsevier Science B.V. All rights reserved.

International Journal of Coal Geology↗

Visible and near-infrared (0.4-2.5 μm) reflectance spectra of playa evaporite minerals

Visible and near-infrared (VNIR; 0.4–2.4 μm) reflectance spectra were recorded for 35 saline minerals that represent the wide range of mineral and brine chemical compositions found in playa evaporite settings. The spectra show that many of the saline minerals exhibit diagnostic near-infrared absorption bands, chiefly attributable to vibrations of hydrogen-bonded structural water molecules. VNIR reflectance spectra can be used to detect minor hydrate phases present in mixtures dominated by anhydrous halite or thenardite, and therefore will be useful in combination with X ray diffraction data for characterizing natural saline mineral assemblages. In addition, VNIR reflectance spectra are sensitive to differences in sample hydration state and should facilitate in situ studies of minerals that occur as fragile, transitory dehydration products in natural salt crusts. The use of spectral reflectance measurements in playa studies should aid in mapping evaporite mineral distributions and may provide insight into the geochemical and hydrological controls on playa mineral and brine development.

Journal of Geophysical Research↗

Quantitative estimation of undiscovered mineral resources: A case study of US Forest Service Wilderness tracts in the Pacific Mountain system

The need by land managers and planners for more quantitative measures of mineral values has prompted scientists at the U.S. Geological Survey to test a probabilistic method of mineral resource assessment on a portion of the wilderness lands that have been studied by the Survey during the past 20 years. A quantitative estimate of undiscovered mineral resources is made by linking the techniques of subjective estimation, geologic mineral deposit models, and Monte Carlo simulation. The study, which uses grade-tonnage and occurrence models for 21 geologic deposit types, considers 91 U.S. Forest Service wilderness tracts in California, Nevada, Oregon, and Washington. Estimates of the amounts of the 11 metals contained in undiscovered mineral deposits of the types studied range from negligible to several years of U.S. consumption. Although these estimates are limited to metals contained in undiscovered deposits of a small number of metallic mineral deposit types, the assessment procedure can be expanded by the use of additional deposit models and by using information about identified mineral resources. This will allow models of economic processes such as exploration, development, and production to be applied.

Economic Geology↗

Maps showing mineral resource assessment for vein and replacement deposits of base and precious metals, barite, and fluorspar, Dillon 1° x 2° quadrangle, Idaho and Montana

This report is one of several that assess the mineral resources in the Dillon quadrangle. For the purpose of the assessment, the deposits that are known in the quadrangle, or suspected to be present from a knowledge of the geologic setting, have been grouped into 30 deposit types on the basis of the mineralogy or commodity in the ore and the structural or depositional setting of the deposit. The emphasis in these assessment reports is on metallic minerals, but some important nonmetallic minerals are also considered. Fossil fuels are beyond the scope of this investigation, phosphate and uranium have been investigated previously (Swanson, 1970; Wodzicki and Krason, 1981 ), and certain nonmetallic minerals, including bulk commodities such as sand and gravel, are in large supply and thus are not considered. The mineral resource assessment discussed in this report concentrates on a single deposit type (of the total of 30 types) that we call "vein and replacement deposits of base and precious metals." Base and precious metals produced from such deposits are copper, lead, zinc, gold, and silver. Vein deposits of barite and fluorspar are also discussed, but because they seem to be of minor importance, they are treated briefly. Vein and replacement deposits of base and precious metals are classified as a single deposit type rather than as numerous possible subordinate types that might be distinguished on the basis of mineralogy, metal content, or other factors, because the characteristics of the ore, the ore bodies, and the structural setting are not sufficiently well known to yield a consistent detailed classification for the entire quadrangle. Furthermore, the criteria used here to explain the localization of deposits are too general to allow discrimination among subordinate types at a scale of 1 :250,000 or smaller. In assessing mineral resources, we have adopted a general philosophy similar to that of Harrison and others ( 1986). We attempt to identify parts of the quadrangle that are favorable for the occurrence of mineral resources, and we make an assignment of the relative resource potential of all parts of the quadrangle. We do not attempt to locate specific exploration targets nor to determine the quantity of reserves or resources present.

Idaho, Montana↗

Map showing mineral-resource potential of the King Range and Chemise Mountain Instant Study Areas, Humboldt and Mendocino counties, California

The potential for economic development of energy-related or metallic mineral resources in the King Range and Chemise Mountain Instant Study Areas is low to moderate as indicated by geologic, geophysical, and geochemical investigations. No oil or gas seeps or coal seams were detected within the King Range or Chemise Mountain Study Area. The low porosity and permeability of the Franciscan sandstones that underlie these areas indicate a very low potential for oil or gas. The geothermal resource potential of these areas also is low. Minor manganese resources occur adjacent to the southeast corner of the King Range Instant Study Area near Queen Peak. The manganese forms small stratabound deposits associated with radiolarian chert and pillow basalt. The known deposits are too small and the manganese too low in concentration for further economic exploitation. Similar manganese mineralization may be within the belt of melange in the southeast corner of the King Range area and within the Chemise Mountain Instant Study Area, but economic deposits are unlikely. Although there has been historical base- and precious-metal exploration activity north of the King Range in the Mattole River drainage, our geologic and geochemical field data indicate almost no gold potential and low potentials for lead, zinc, copper, and silver. During this investigation, one high-grade vein and several minor veins containing lead, zinc, copper, and silver were discovered at Point Delgada immediately south of the King Range Instant Study Area. The vein mineralization is Miocene and cuts Cretaceous basalt flows, dikes, flow breccia, and younger overlying sedimentary rocks of the King Range. The vein mineralization at Point Delgada could be remobilized from more extensive unexposed stratabound base-metal mineralization at depth. Traces of lead and zinc detected within the King Range Instant Study Area may have similar stratabound or vein origins, but no resource potential is indicated. Minor copper mineralization with associated lead, zinc, and manganese anomalies within the Chemise Mountain Instant Study Area is of low economic potential because of the shearing, isolation, and lenticularity of the basaltic and cherty rocks within the melange mineralization.

California↗

Topographic and Hydrographic GIS Datasets for the Afghanistan Geological Survey and U.S. Geological Survey 2014 Mineral Areas of Interest

Mineral extraction and associated industries play an important role in the Afghan economy, particularly in the “transitional era” of declining foreign aid and withdrawal of foreign troops post 2014. In addition to providing a substantial source of government revenue, other potential benefits of natural resource development include boosted exports, employment opportunities, and strengthened industrialization (Joya, 2012). Continued exploration and investment in these industries has resulted in large economic improvements since 2007, when this series of studies was initiated. At that time, the “Preliminary Non-Fuel Mineral Resource Assessment of Afghanistan” was completed by members of the U.S. Geological Survey and Afghanistan Geological Survey (Peters and others, 2007). The assessment published a series of country-wide datasets, including a digital elevation model (DEM), elevation contours, hydrography, transportation routes, geophysics, and cultural datasets (Peters and others, 2007). It also delineated 20 mineralized areas for further study using a geologic-based methodology. A second data product, “Summaries of Important Areas for Mineral Investment and Production Opportunities of Nonfuel Minerals in Afghanistan,” was released by Peters and others in 2011. This work highlighted geologic, geohydrologic, and hyperspectral studies that were carried out in specific Areas of Interest (AOIs) to assess the location and characteristics of mineral resources. Also included in the 2011 publication is a collection of appendixes and inventories of Geographic Information System (GIS) datasets for each of the 24 identified AOIs. A third data product was released in 2013 (Casey and Chirico, 2013), publishing datasets for five different AOIs, two subareas, and one AOI extension. Each dataset contains vector shapefiles of the AOI boundary, streams, roads, and contours at 25-, 50-, and 100-meter (m) intervals, as well as raster files of the AOI’s DEM and hillshade. This work represents the fourth installment of the series, and publishes a dataset of eight new AOIs and one subarea within Afghanistan. These areas include Dasht-e-Nawar, Farah, North Ghazni, South Ghazni, Chakhansur, Godzareh East, Godzareh West, and Namaksar-e-Herat AOIs and the Central Bamyan subarea of the South Bamyan AOI (datasets for South Bamyan were published previously in Casey and Chirico, 2013). For each AOI and subarea, this dataset collection consists of the areal extent boundaries, elevation contours at 25-, 50-, and 100-m intervals, and an enhanced DEM. Hydrographic datasets covering the extent of four AOIs and one subarea are also included in the collection. The resulting raster and vector layers are intended for use by government agencies, developmental organizations, and private companies in Afghanistan to support mineral assessments, monitoring, management, and investment.

Open-File Report↗

Heavy mineral prospecting in Pakistan

Heavy-mineral prospecting is a method of tracing potential ore minerals to their source by systematically examining the heavy minerals of stream sands. The heavy minerals are partially concentrated in the field by panning. In the laboratory the heavy minerals are further concentrated by floating off the quartz and feldspar in a heavy liquid, such as bromoform, having a specific gravity of 2.89. Magnetite is separated magnetically and scheelite is identified under short-wave ultraviolet light. To obtain quantitative results on the minerals present, the sample is reduced by coning and quartering, mounted on a slide in oil, and a count of a minimum of 250 grains made. The chi square test applied to the splitting and counting techniques shows them to be statistically valid. The properties of some heavy minerals most useful for their rapid identification are listed. Methods here described are those utilizing a minimum of field and laboratory equipment and may be appropriate for application in many areas of the world.

Open-File Report↗

Heavy-mineral trends in the Beaufort Sea

Sediments of the Beaufort Sea, off the North Slope of Alaska contain a great variety of heavy minerals. These include garnet, chrome spinel, augite, pigeonite, diopside, hornblende, enstatite, hypersthene, epidote, clinozoisite, zoisite, apatite, tourmaline, chloritoid, sphene, zircon, and opaque minerals. Much rarer constituents are glaucophane, lamprobolite, rutile, kyanite, staurolite, and riebeckite. The heavy-mineral fractions that were not treated with hydrochloric acid contain "iron-stained aggregates", grains of unidentifiable material encrusted with limonite. Samples containing relatively high percentages of iron-stained aggregates and altered opaque minerals occur in depths less than 10 m and within 16 km from shore. Garnet increases in abundance from east to west, which corresponds to a similar increase in garnet abundance in coastal outcrops of the Gubik Formation sands. Only garnet and iron-stained aggregates appear to have source-related distribution patterns. The other heavy minerals lack distinct distributive provinces, reflecting an environment dominated by intense mixing by ice-gouging and bioturbation and a homogenous source area. Waves and currents are not strong enough to sort sediments at depths greater than 10 m except during summer storms. The source of the Beaufort Sea heavy minerals is dominated by contributions from the Alaskan North Slope deposits of Tertiary and younger age. The Colville River, largest in the region, is probably the most influential in transporting sediments, but because of wave and current—mixing of sediments on the shelf, exact contributions from each river drainage cannot be ascertained. Coastal erosion of the Gubik Formation is probably at least as important as the Colville River in supplying heavy minerals to the Beaufort Sea.

Alaska↗

Radioactive mineral spring precipitates, their analytical and statistical data and the uranium connection

Major radioactive mineral springs are probably related to deep zones of active metamorphism in areas of orogenic tectonism. The most common precipitate is travertine, a chemically precipitated rock composed chiefly of calcium carbonate, but also containing other minerals. The mineral springs are surface manifestations of hydrothermal conduit systems which extend downward many kilometers to hot source rocks. Conduits are kept open by fluid pressure exerted by carbon dioxide-charged waters rising to the surface propelled by heat and gas (CO2 and steam) pressure. On reaching the surface, the dissolved carbon dioxide is released from solution, and calcium carbonate is precipitated. Springs also contain sulfur species (for example, H2S and HS-), and radon, helium and methane as entrained or dissolved gases. The HS- ion can react to form hydrogen sulfide gas, sulfate salts, and native sulfur. Chemical salts and native sulfur precipitate at the surface. The sulfur may partly oxidize to produce detectable sulfur dioxide gas. Radioactivity is due to the presence of radium-226, radon-222, radium-228, and radon-220, and other daughter products of uranium-238 and thorium-232. Uranium and thorium are not present in economically significant amounts in most radioactive spring precipitates. Most radium is coprecipitated at the surface with barite. Barite (barium sulfate) forms in the barium-containing spring water as a product of the oxidation of sulfur species to sulfate ions. The relatively insoluble barium sulfate precipitates and removes much of the radium from solution. Radium coprecipitates to a lesser extent with manganese-barium- and iron-oxy hydroxides. R-mode factor analysis of abundances of elements suggests that 65 percent of the variance of the different elements is affected by seven factors interpreted as follows: (1) Silica and silicate contamination and precipitation; (2) Carbonate travertine precipitation; (3) Radium coprecipitation; (4) Evaporite precipitation; (5) Hydrous limonite precipitation and coprecipitated elements including uranium; (6) Rare earth elements deposited with detrital contamination (?); (7) Metal carbonate adsorption and precipitation. Economically recoverable minerals occurring at some localities in spring precipitates are ores of iron, manganese, sulfur, tungsten and barium and ornamental travertine. Continental radioactive mineral springs occur in areas of crustal thickening caused by overthrusting of crustal plates, and intrusion and metamorphism. Sedimentary rocks on the lower plate are trapped between the plates and form a zone of metamorphism. Connate waters, carbonate rocks and organic-carbon-bearing rocks react to extreme pressure and temperature to produce carbon dioxide, and steam. Fractures are forced open by gas and fluid pressures. Deep-circulating meteoric waters then come in contact with the reactive products, and a hydrothermal cell forms. When hot mineral-charged waters reach the surface they form the familiar hot mineral springs. Hot springs also occur in relation to igneous intrusive action or volcanism both of which may be products of the crustal plate overthrusting. Uranium and thorium in the sedimentary rocks undergoing metamorphism are sometimes mobilized, but mobilization is generally restricted to an acid hydrothermal environment; much is redeposited in favorable environments in the metamorphosed sediments. Radium and radon, which are highly mobile in both acid and alkaline aqueous media move upward into the hydrothermal cell and to the surface.

Open-File Report↗

Mining properties in Montana that were involved in the DMA, DMEA, OME Mineral Exploration Programs, 1950-1974

Introduction This report and accompanying map (plate 1) presents information on the Defense Minerals Administration (DMA), Defense Minerals Exploration Administration (DMEA), and Office of Minerals Exploration (OME) mineral exploration programs in Montana. Under these programs, the federal government participated in the exploration costs for certain strategic and critical minerals. Federal funds for mineral exploration under the programs were available from 1950 to 1974, although limited funds for OME administrative work were continued until 1979. Federal consideration for exploration at a particular property was initiated by submittal of an application for financial assistance by the owner or operator of the property. Each application received was assigned a docket number and all subsequent correspondence and information resulting from the application was filed under that docket number. The report reviews the three programs and some of the associated regulations and procedures. It also describes the various types of information generated by the programs, presents information on mining properties in Montana that were involved in the exploration programs, and advises on location of compiled mineral exploration information that resulted from the work.

Montana↗