Geology topics

Groundwater & aquifers

Find USGS groundwater and aquifer publications. Search an aquifer name or place, compare source-supplied dates and open reports for hydrogeology, recharge and water-level studies.

Follow this topic with RSS

At least 1,387 records · Page 77Linked to original sources

USGS2008

Nitrogen biogeochemistry of submarine groundwater discharge

To investigate the role of the seepage zone in transport, chemical speciation, and attenuation of nitrogen loads carried by submarine groundwater discharge, we collected nearshore groundwater samples (n = 328) and examined the distribution and isotopic signature (δ 15 N) of nitrate and ammonium. In addition, we estimated nutrient fluxes from terrestrial and marine groundwater sources. We discuss our results in the context of three aquifer zones: a fresh groundwater zone, a shallow salinity transition zone (STZ), and a deep STZ. Groundwater plumes containing nitrate and ammonium occurred in the freshwater zone, whereas the deep STZ carried almost exclusively ammonium. The distributions of redox-cycled elements were consistent with theoretical thermodynamic stability of chemical species, with sharp interfaces between water masses of distinct oxidation : reduction potential, suggesting that microbial transformations of nitrogen were rapid relative to dispersive mixing. In limited locations in which overlap occurs between distribution of nitrate with that of ammonium and dissolved Fe 2+ , changes in concentration and in δ 15 N suggest loss of all species. Concurrent removal of NO 3 − and NH 4 + , both in freshwater and the deep STZ, might occur through a range of mechanisms, including heterotrophic or autotrophic denitrification, coupled nitrfication : denitrification, anammox, or Mn oxidation of NH 4 + . Loss of nitrogen was not apparent in the shallow STZ, perhaps because of short water residence time. Despite organic Cpoor conditions, the nearshore aquifer and subterranean estuary are biogeochemically active zones, where attenuation of N loads can occur. Extent of attenuation is controlled by the degree of mixing of biogeochemically dissimilar water masses, highlighting the critical role of hydrogeology in N biogeochemistry. Mixing is related in part to thinning of the freshwater lens before discharge and to dispersion at the fresh : saline groundwater interface, features common to all submarine groundwater discharge zones.

Limnology and Oceanography↗

USGS1997

Preliminary assessment of the occurrence and possible sources of MTBE in groundwater in the United States, 1993-1994

The 1990 Clean Air Act Amendments require fuel oxygenates to be added to gasoline used in some metropolitan areas to reduce atmospheric concentrations of carbon monoxide or ozone. Methyl tert-butyl ether (MTBE), is the most commonly used fuel oxygenate and is a relatively new gasoline additive. Nevertheless, out of 60 volatile organic chemicals analyzed, MTBE was the second most frequently detected chemical in samples of shallow ambient groundwater from urban areas that were collected during 1993-94 as part of the U.S. Geological Survey's National Water-Quality Assessment Program. Samples were collected from 5 drinking-water wells, 12 springs, and 1g3 monitoring wells in urban areas. No MTBE was detected in drinking-water wells. At a reporting level of 0.2 ??g/L, MTBE was detected most frequently in shallow groundwater from urban areas (27% of 210 wells and springs sampled in 8 areas) as compared to shallow groundwater from agricultural areas (1.3% of 549 wells sampled in 21 areas) or deeper groundwater from major aquifers (1.0% of 412 wells sampled in 9 areas). Only 3% of the shallow wells sampled in urban areas had concentrations of MTBE that exceed 20 ??g/L, which is the estimated lower limit of the United States Environmental Protection Agency draft lifetime drinking water health advisory. Because MTBE is persistent and mobile in groundwater) it can move from shallow to deeper aquifers with time. In shallow urban groundwater, MTBE generally was not found with benzene, toluene, ethylbenzene, or xylenes (BTEX) compounds which commonly are associated with gasoline spills. This disassociation causes uncertainty as to the source of MTBE. Possible sources of MTBE in groundwater include point sources, such as leaking storage tanks, and nonpoint sources, such as recharge of precipitation and storm-water runoff.

ACS Division of Environmental Chemistry, Preprints↗

USGS2017

Evaluation of bias associated with capture maps derived from nonlinear groundwater flow models

The impact of groundwater withdrawal on surface water is a concern of water users and water managers, particularly in the arid western United States. Capture maps are useful tools to spatially assess the impact of groundwater pumping on water sources (e.g., streamflow depletion) and are being used more frequently for conjunctive management of surface water and groundwater. Capture maps have been derived using linear groundwater flow models and rely on the principle of superposition to demonstrate the effects of pumping in various locations on resources of interest. However, nonlinear models are often necessary to simulate head-dependent boundary conditions and unconfined aquifers. Capture maps developed using nonlinear models with the principle of superposition may over- or underestimate capture magnitude and spatial extent. This paper presents new methods for generating capture difference maps, which assess spatial effects of model nonlinearity on capture fraction sensitivity to pumping rate, and for calculating the bias associated with capture maps. The sensitivity of capture map bias to selected parameters related to model design and conceptualization for the arid western United States is explored. This study finds that the simulation of stream continuity, pumping rates, stream incision, well proximity to capture sources, aquifer hydraulic conductivity, and groundwater evapotranspiration extinction depth substantially affect capture map bias. Capture difference maps demonstrate that regions with large capture fraction differences are indicative of greater potential capture map bias. Understanding both spatial and temporal bias in capture maps derived from nonlinear groundwater flow models improves their utility and defensibility as conjunctive-use management tools.

Groundwater↗

USGS2026

Deep groundwater total dissolved solids mapping in the Dakota Group, Williston Basin, USA

Growing concern about the quantity of available freshwater around the world has led to interest in surveying groundwater total dissolved solids (TDS) below water well depths. Deep TDS has not been systematically mapped, and there is much to learn about the distribution and controls on deeper groundwater. In sedimentary basins across the United States, groundwater resources often overlie hydrocarbon resources, providing an opportunity to use borehole geophysical data collected for hydrocarbons to characterize groundwater and pore space resources. This study adapts a recently developed subsurface geostatistical and geophysical modeling approach to continuously map groundwater TDS, porosity, and temperature in the Dakota Group of the Williston Basin—an undercharacterized regional aquifer system overlying deeper hydrocarbon reservoirs. Groundwater TDS in the Dakota Group ranges from approximately 4800 to 26,900 mg/L. TDS patterns are stratified with higher TDS in the lower and upper Dakota Group, and relatively lower TDS in the middle Dakota Group. The lower TDS in the middle zone may represent a preferential regional flow path for lower-TDS meteoric recharge from the west. The alternating pattern of TDS may also be evidence of higher-TDS inflows into the Dakota Group from underlying and potentially from overlying aquifers. Porosity is lower near the center of the Williston Basin and tends to be higher to the east, which may be related to grain size distributions. The new regional TDS and porosity modeling serves as a quantitative reference for water users and provides supporting evidence for hypotheses on Dakota Group recharge.

Montana, North Dakota, South Dakota↗

USGS2021

Assessment of NMR logging for estimating hydraulic conductivity in glacial aquifers

Glacial aquifers are an important source of groundwater in the United States and require accurate characterization to make informed management decisions. One parameter that is crucial for understanding the movement of groundwater is hydraulic conductivity, K . Nuclear magnetic resonance (NMR) logging measures the NMR response associated with the water in geological materials. By utilizing an external magnetic field to manipulate the nuclear spins associated with 1 H, the time‐varying decay of the nuclear magnetization is measured. This logging method could provide an effective way to estimate K at submeter vertical resolution, but the models that relate NMR measurements to K require calibration. At two field sites in a glacial aquifer in central Wisconsin, we collected a total of four NMR logs and obtained measurements of K in their immediate vicinity with a direct‐push permeameter (DPP). Using a bootstrap algorithm to calibrate the Schlumberger‐Doll Research (SDR) NMR‐ K model, we estimated K to within a factor of 5 of the DPP measurements. The lowest levels of accuracy occurred in the lower‐ K ( K < 10 −4 m/s) intervals. We also evaluated the applicability of prior SDR model calibrations. We found the NMR calibration parameters varied with K , suggesting the SDR model does not incorporate all the properties of the pore space that control K . Thus, the expected range of K in an aquifer may need to be considered during calibration of NMR‐ K models. This study is the first step toward establishing NMR logging as an effective method for estimating K in glacial aquifers.

Groundwater↗

USGS2015

Using noble gas tracers to constrain a groundwater flow model with recharge elevations: A novel approach for mountainous terrain

Environmental tracers provide information on groundwater age, recharge conditions, and flow processes which can be helpful for evaluating groundwater sustainability and vulnerability. Dissolved noble gas data have proven particularly useful in mountainous terrain because they can be used to determine recharge elevation. However, tracer-derived recharge elevations have not been utilized as calibration targets for numerical groundwater flow models. Herein, we constrain and calibrate a regional groundwater flow model with noble-gas-derived recharge elevations for the first time. Tritium and noble gas tracer results improved the site conceptual model by identifying a previously uncertain contribution of mountain block recharge from the Coast Mountains to an alluvial coastal aquifer in humid southwestern British Columbia. The revised conceptual model was integrated into a three-dimensional numerical groundwater flow model and calibrated to hydraulic head data in addition to recharge elevations estimated from noble gas recharge temperatures. Recharge elevations proved to be imperative for constraining hydraulic conductivity, recharge location, and bedrock geometry, and thus minimizing model nonuniqueness. Results indicate that 45% of recharge to the aquifer is mountain block recharge. A similar match between measured and modeled heads was achieved in a second numerical model that excludes the mountain block (no mountain block recharge), demonstrating that hydraulic head data alone are incapable of quantifying mountain block recharge. This result has significant implications for understanding and managing source water protection in recharge areas, potential effects of climate change, the overall water budget, and ultimately ensuring groundwater sustainability.

Water Resources Research↗

USGS1987

Analysis of an anisotropic coastal aquifer system using variable-density flow and solute transport simulation

The groundwater system in southern Oahu, Hawaii consists of a thick, areally extensive freshwater lens overlying a zone of transition to a thick saltwater body. This system is analyzed in cross section with a variable-density groundwater flow and solute transport model on a regional scale. The simulation is difficult, because the coastal aquifer system has a saltwater transition zone that is broadly dispersed near the discharge area, but is very sharply defined inland. Steady-state simulation analysis of the transition zone in the layered basalt aquifer of southern Oahu indicates that a small transverse dispersivity is characteristic of horizontal regional flow. Further, in this system flow is generally parallel to isochlors and steady-state behavior is insensitive to the longitudinal dispersivity. Parameter analysis identifies that only six parameters control the complex hydraulics of the system: horizontal and vertical hydraulic conductivity of the basalt aquifer; hydraulic conductivity of the confining "caprock" layer; leakance below the caprock; specific yield; and aquifer matrix compressibility. The best-fitting models indicate the horizontal hydraulic conductivity is significantly greater than the vertical hydraulic conductivity. These models give values for specific yield and aquifer compressibility which imply a considerable degree of compressive storage in the water table aquifer.

Hawaii↗

USGS2022

Linkages between land-use change and groundwater management foster long-term resilience of water supply in California

Study Region We created a 270-m coupled model of land-use and groundwater conditions, LUCAS-W[ater], for California’s Central Coast. This groundwater-dependent region is undergoing a dramatic reorganization of groundwater management under California’s 2014 Sustainable Groundwater Management Act (SGMA). Study Focus Understanding land-use and land-cover change supports long-term sustainable water management. Anthropogenic water demand has depleted groundwater aquifers worldwide, while future water shortages will likely affect land-use change, creating system feedbacks. Our novel participatory approach fused changes in land-use and associated water use from county-scale data to local water agencies’ estimates of total sustainable supply, scaling up local hydro-geologic knowledge from heterogeneous aquifers and diverse management approaches to a regional level. We assessed five stakeholder-driven scenarios with the same historic rates of urban and agricultural land-use change, but different water and land-use management, analyzing how management strategies altered both the spatial pattern of development and subsequent water sustainability from 2001 to 2061. New Hydrological Insights for the Region Transformative strategies using demand-side interventions that coupled water availability to land-use more effectively achieved long-term sustainability than adaptive strategies using supply-side interventions to increase water supplies. Limiting water withdrawals within SGMA regulated basins resulted in leakage of development into unregulated basins, increasing groundwater pumping there. Protecting ecosystems, farmlands, and recharge areas from development reduced leakage into undeveloped basins without negatively affecting water sustainability.

California↗

USGS2004

Contamination of groundwater under cultivated fields in an arid environment, central Arava Valley, Israel

The purpose of this study is to obtain a better understanding of groundwater contamination processes in an arid environment (precipitation of 50 mm/year) due to cultivation. Additional aims were to study the fate of N, K, and other ions along the whole hydrological system including the soil and vadose zone, and to compare groundwater in its natural state with contaminated groundwater (through the drilling of several wells). A combination of physical, chemical, and isotopic analyses was used to describe the hydrogeological system and the recharge trends of water and salts to the aquifers. The results indicate that intensive irrigation and fertilization substantially affected the quantity and quality of groundwater recharge. Low irrigation efficiency of about 50% contributes approximately 3.5–4 million m 3 /year to the hydrological system, which corresponds to 0.65 m per year of recharge in the irrigated area, by far the most significant recharge mechanism. Two main contamination processes were identified, both linked to human activity: (1) salinization due to circulation of dissolved salts in the irrigation water itself, mainly chloride, sulfate, sodium and calcium, and (2) direct input of nitrate and potassium mainly from fertilizers. The nitrate concentrations in a local shallow groundwater lens range between 100 and 300 mg/l and in the upper sub-aquifer are over 50 mg/l. A major source of nitrate is fertilizer N in the excess irrigation water. The isotopic compositions of δ 15 N–NO 3 (range of 4.9–14.8‰) imply also possible contributions from nearby sewage ponds and/or manure. Other evidence of contamination of the local groundwater lens includes high concentrations of K (20–120 mg/l) and total organic carbon (about 10 mg/l).

Journal of Hydrology↗

USGS2007

Evidence of CFC degradation in groundwater under pyrite-oxidizing conditions

A detailed local-scale monitoring network was used to assess CFC distribution in an unconfined sand aquifer in southwestern Ontario where the zone of 1–5-year-old groundwater was known with certainty because of prior use of a bromide tracer. Groundwater ⩽5 years old was confined to an aerobic zone at ⩽5 m depth and had CFC concentrations consistent with modern atmospheric mixing ratios at recharge temperatures of 7–11 °C, as was observed in the 3-m thick vadose zone at the site. At depths below 6 m, the groundwater became progressively more reducing, however, with a denitrifying horizon at 6–7 m depth, and a Mn and Fe reducing zone below 7 m depth. In the anaerobic zone, 3 H/ 3 He ratios indicated that groundwater-age continued to increase uniformly with depth, to a maximum value of 27 years at 13 m depth. CFC concentrations, however, decreased abruptly within the denitrifying zone, leading to substantial age overestimation compared to the 3 H/ 3 He ages. Noble gas data indicated that the apparent CFC mass loss was not likely the result of gas stripping from possible bubble formation; thus, CFC degradation was indicated in the anoxic zone. The field data are consistent with first-order degradation rates of 0.3 yr −1 for CFC-12, 0.7 yr −1 for CFC-11, and 1.6 yr −1 for CFC-113. CFC attenuation at this site coincides with a zone where reduced S (pyrite) is actively oxidized by NO 3 and dissolved oxygen (DO). Similar behavior has been observed at other sites [Tesoriero, A.J., Liebscher, H., Cox, S.E., 2000. Mechanism and rate of denitrification in an agricultural watershed: electron and mass balance along groundwater flow path. Water Resour. Res. 36 (6), 1545–1559; Hinsby, K., Hojberg, A.L., Engesgaard, P., Jensen, K.H., Larsen, F., Plummer, L.N., Busenberg, E., Accepted for publication. Transport and degradation of chlorofluorocarbons (CFCs) in a pyritic aquifer, Rabis Creek, Denmark. Water Resour. Res.], further demonstrating that the use of CFCs for age-dating anaerobic groundwater should be approached with caution, particularly if the sediment contains pyrite.

Journal of Hydrology↗

USGS2014

Characterization of the porosity distribution in the upper part of the karst Biscayne aquifer using common offset ground penetrating radar, Everglades National Park, Florida

The karst Biscayne aquifer is characterized by a heterogeneous spatial arrangement of porosity and hydraulic conductivity, making conceptualization difficult. The Biscayne aquifer is the primary source of drinking water for millions of people in south Florida; thus, information concerning the distribution of karst features that concentrate the groundwater flow and affect contaminant transport is critical. The principal purpose of the study was to investigate the ability of two-dimensional ground penetrating radar (GPR) to rapidly characterize porosity variability in the karst Biscayne aquifer in south Florida. An 800-m-long GPR transect of a previously investigated area at the Long Pine Key Nature Trail in Everglades National Park, collected in fast acquisition common offset mode, shows hundreds of diffraction hyperbolae. The distribution of diffraction hyperbolae was used to estimate electromagnetic (EM) wave velocity at each diffraction location and to assess both horizontal and vertical changes in velocity within the transect. A petrophysical model (complex refractive index model or CRIM) was used to estimate total bulk porosity. A set of common midpoint surveys at selected locations distributed along the common-offset transect also were collected for comparison with the common offsets and were used to constrain one-dimensional (1-D) distributions of porosity with depth. Porosity values for the saturated Miami Limestone ranged between 25% and 41% for common offset GPR surveys, and between 23% and 39% for common midpoint GPR surveys. Laboratory measurements of porosity in five whole-core samples from the saturated part of the aquifer in the study area ranged between 7.1% and 41.8%. GPR estimates of porosity were found to be valid only under saturated conditions; other limitations are related to the vertical resolution of the GPR signal and the volume of the material considered by the measurement methodology. Overall, good correspondence between GPR estimates and the direct porosity values from the whole-core samples confirms the ability of GPR common offset surveys to provide rapid characterization of porosity variability in the Biscayne aquifer. The common offset survey method has several advantages: (1) improved time efficiency in comparison to other GPR acquisition modes such as common midpoints; and (2) enhanced lateral continuity of porosity estimates, particularly when compared to porosity measurements on 1-D samples such as rock cores. The results also support the presence of areas of low EM wave velocity or high porosity under saturated conditions, causing velocity pull-down areas and apparent sag features in the reflection record. This study shows that GPR can be a useful tool for improving understanding of the petrophysical properties of highly heterogeneous systems such as karst aquifers, and thus may assist with the development of more accurate groundwater flow models, such as those used for restoration efforts in the Everglades.

Florida↗

USGS2022

Effects of imported recharge on fluoride trends in groundwater used for public supply in California

Fluoride is a naturally occurring element in groundwater that supports bone and dental health at low concentrations but can cause health problems at elevated concentrations in drinking water. This study investigates spatial and temporal trends for fluoride concentrations in untreated groundwater from over 20,000 public supply wells in California. The presence of a significant temporal trend in fluoride concentrations in a well was assessed using the Mann-Kendall test and a spatial-weighting approach was used to identify the areal extent of the groundwater resources with significant trends. Less than 2% of the groundwater resources used for public supply in the state have concentrations above the California maximum contaminant level of 2 mg/L. Approximately 14% of the groundwater resource used for public supply show a significant recent trend (2000–2019), with decreasing trends occurring in 10% of the resource. Potential drivers for trends were evaluated in two of the areas in southern California with the greatest prevalence of trends but distinct climate and hydrogeological characteristics. Aquifers in the Mojave and Whitewater River watersheds, located in the desert region, and the Los Angeles Basin, located on the coast, have been replenished with imported and treated water over the last half century to maintain sustainable groundwater levels. The recharge of imported water with different chemistries has altered the geochemical conditions in the aquifers, driving changes in fluoride concentrations.

California↗

USGS2013

Groundwater ages and mixing in the Piceance Basin natural gas province, Colorado

Reliably identifying the effects of energy development on groundwater quality can be difficult because baseline assessments of water quality completed before the onset of energy development are rare and because interactions between hydrocarbon reservoirs and aquifers can be complex, involving both natural and human processes. Groundwater age and mixing data can strengthen interpretations of monitoring data from those areas by providing better understanding of the groundwater flow systems. Chemical, isotopic, and age tracers were used to characterize groundwater ages and mixing with deeper saline water in three areas of the Piceance Basin natural gas province. The data revealed a complex array of groundwater ages (<10 to >50,000 years) and mixing patterns in the basin that helped explain concentrations and sources of methane in groundwater. Age and mixing data also can strengthen the design of monitoring programs by providing information on time scales at which water quality changes in aquifers might be expected to occur. This information could be used to establish maximum allowable distances of monitoring wells from energy development activity and the appropriate duration of monitoring.

Colorado↗

USGS2020

Improved prediction of management-relevant groundwater discharge characteristics throughout river networks

Groundwater discharge zones connect aquifers to surface water, generating baseflow and serving as ecosystem control points across aquatic ecosystems. The influence of groundwater discharge on surface flow connectivity, fate and transport of contaminants and nutrients, and thermal habitat depends strongly on hydrologic characteristics such as the spatial distribution, age, and depth of source groundwater flow paths. Groundwater models have the potential to predict spatial discharge characteristics within river networks, but models are often not evaluated against these critical characteristics and model equifinality with respect to discharge processes is a known challenge. We quantify discharge characteristics across a suite of groundwater models with commonly used frameworks and calibration data. We developed a base model (MODFLOW‐NWT) for a 1,570‐km 2 watershed in the northeastern United States and varied the calibration data, control of river‐aquifer exchange directionality, and resolution. Most models ( n = 11 of 12) fit similarly to calibration metrics, but patterns in discharge location, flow path depth, and subsurface travel time varied substantially. We found (1) a 15% difference in the percent of discharge going to first‐order streams, (2) threefold variations in flow path depth, and (3) sevenfold variations in the subsurface travel times among the models. We recalibrated three models using a synthetic discharge location data set. Calibration with discharge location data reduced differences in simulated discharge characteristics, suggesting an approach to improved equifinality based on widespread field‐based mapping of discharge zones. Our work quantifying variation across common modeling approaches is an important step toward characterizing and improving predictions of groundwater discharge characteristics.

Connecticut, Massachusetts↗

USGS2008

Evaluation of the sustainability of deep groundwater as an arsenic-safe resource in the Bengal Basin

Tens of millions of people in the Bengal Basin region of Bangladesh and India drink groundwater containing unsafe concentrations of arsenic. This high-arsenic groundwater is produced from shallow (<100 m) depths by domestic and irrigation wells in the Bengal Basin aquifer system. The government of Bangladesh has begun to install wells to depths of >150 m where groundwater arsenic concentrations are nearly uniformly low, and many more wells are needed, however, the sustainability of deep, arsenic-safe groundwater has not been previously assessed. Deeper pumping could induce downward migration of dissolved arsenic, permanently destroying the deep resource. Here, it is shown, through quantitative, large-scale hydrogeologic analysis and simulation of the entire basin, that the deeper part of the aquifer system may provide a sustainable source of arsenic-safe water if its utilization is limited to domestic supply. Simulations provide two explanations for this result: deep domestic pumping only slightly perturbs the deep groundwater flow system, and substantial shallow pumping for irrigation forms a hydraulic barrier that protects deeper resources from shallow arsenic sources. Additional analysis indicates that this simple management approach could provide arsenic-safe drinking water to >90% of the arsenic-impacted region over a 1,000-year timescale. This insight may assist water-resources managers in alleviating one of the world's largest groundwater contamination problems.

Proceedings of the National Academy of Sciences of↗

USGS2011

Evaluating impacts of subdivision density on shallow groundwater in Southeastern Wisconsin, USA

Using simple numerical groundwater flow models, we tested the impacts of suburban developments on groundwater levels and discharge to streams. We used lot sizes of 1, 3 and 5 acres (4000, 12,000 and 20,000 m 2 ) with one domestic well per lot that pumped water from shallow aquifers. Our modelling showed that pumping had little impact on water levels and groundwater discharge to streams if the developed area is of a moderate size. However, domestic wells had the potential to impact local groundwater levels and baseflows in large developments. In township-wide development scenarios of 1-acre (4000 m 2 ) lots, simulated drawdowns beneath developed areas ranged from 1 to 18 ft (0.3 to 5.5 m), and baseflow reductions ranged from 20 to 40%. Impacts generally were inversely proportional to lot size, recharge rate and hydraulic conductivity of the aquifer materials. Developments using individual domestic wells have the potential to impact local groundwater levels and surface water features. The impacts can range from negligible to severe, depending on local hydrogeologic conditions and on whether wastewater is recharged onsite or is removed from the basin. An assessment of groundwater impacts should be a part of the planning process for all suburban developments.

Wisconsin↗

USGS2014

Understanding heat and groundwater flow through continental flood basalt provinces: insights gained from alternative models of permeability/depth relationships for the Columbia Plateau, USA

Heat-flow mapping of the western USA has identified an apparent low-heat-flow anomaly coincident with the Columbia Plateau Regional Aquifer System, a thick sequence of basalt aquifers within the Columbia River Basalt Group (CRBG). A heat and mass transport model (SUTRA) was used to evaluate the potential impact of groundwater flow on heat flow along two different regional groundwater flow paths. Limited in situ permeability (k) data from the CRBG are compatible with a steep permeability decrease (approximately 3.5 orders of magnitude) at 600–900 m depth and approximately 40°C. Numerical simulations incorporating this permeability decrease demonstrate that regional groundwater flow can explain lower-than-expected heat flow in these highly anisotropic (k x /k z ~ 10 4 ) continental flood basalts. Simulation results indicate that the abrupt reduction in permeability at approximately 600 m depth results in an equivalently abrupt transition from a shallow region where heat flow is affected by groundwater flow to a deeper region of conduction-dominated heat flow. Most existing heat-flow measurements within the CRBG are from shallower than 600 m depth or near regional groundwater discharge zones, so that heat-flow maps generated using these data are likely influenced by groundwater flow. Substantial k decreases at similar temperatures have also been observed in the volcanic rocks of the adjacent Cascade Range volcanic arc and at Kilauea Volcano, Hawaii, where they result from low-temperature hydrothermal alteration.

Idaho;Oregon;Washington↗

USGS2007

Geochemical interpretations of groundwater flow systems

Interest in the geochemistry of groundwater is increasing owing to the great number of current projects involving underground liquid waste storage, artificial recharge of potable water, accidental contamination of groundwater bodies, sanitary landfills, and pollution monitoring. Geochemical techniques used to facilitate the understanding of a groundwater system range from extremely simple to those requiring sophisticated theories, equipment, and procedures. An interpretation of the simple trilinear diagram for samples collected from the Yucatan Peninsula of Mexico provided evidence that the fresh-water body was only a few tens of meters thick and was underlain everywhere by an extensive body of salt water. A geochemical technique that has been used effectively to identify the source of salt water in coastal aquifers is measurement of the carbon-14 concentrations. Carbon-14 has been used in a regional carbonate aquifer to determine the velocity of groundwater movement, rates of chemical reactions, and distribution of hydraulic conductivity. The application of principles of irreversible thermodynamics to groundwater systems provides a basis for constructing models which permit prediction, over both time and space, of changes in head distribution and chemical character of the water resulting from imposed stresses on the system. In essence, proper application of irreversible thermodynamics combines the potential theory of Hubbert with principles of reversible chemical thermodynamics, such as solution of carbonate minerals, to describe and explain controlling chemical reactions and processes of groundwater systems.

Florida, South Carolina↗