Geology topics

Groundwater & aquifers

Find USGS groundwater and aquifer publications. Search an aquifer name or place, compare source-supplied dates and open reports for hydrogeology, recharge and water-level studies.

Follow this topic with RSS

At least 1,261 records · Page 70Linked to original sources

USGS2012

Groundwater quality in the Mojave area, California

Groundwater provides more than 40 percent of California’s drinking water. To protect this vital resource, the State of California created the Groundwater Ambient Monitoring and Assessment (GAMA) Program. The Priority Basin Project of the GAMA Program provides a comprehensive assessment of the State’s groundwater quality and increases public access to groundwater-quality information. Four groundwater basins along the Mojave River make up one of the study areas being evaluated. The Mojave study area is approximately 1,500 square miles (3,885 square kilometers) and includes four contiguous groundwater basins: Upper, Middle, and Lower Mojave River Groundwater Basins, and the El Mirage Valley (California Department of Water Resources, 2003). The Mojave study area has an arid climate, and is part of the Mojave Desert. Average annual rainfall is about 6 inches (15 centimeters). Land use in the study area is approximately 82 percent (%) natural (mostly shrubland), 4% agricultural, and 14% urban. The primary crops are pasture and hay. The largest urban areas are the cities of Victorville, Hesperia, and Apple Valley (2010 populations of 116,000, 90,000 and 69,000, respectively). Groundwater in these basins is used for public and domestic water supply and for irrigation. The main water-bearing units are gravel, sand, silt, and clay derived from surrounding mountains. The primary aquifers in the Mojave study area are defined as those parts of the aquifers corresponding to the perforated intervals of wells listed in the California Department of Public Health database. Public-supply wells in the Mojave study area are completed to depths between 200 and 600 feet (18 to 61 meters), consist of solid casing from the land surface to a depth of 130 to 420 feet (40 to 128 meters), and are screened or perforated below the solid casing. Recharge to the groundwater system is primarily runoff from the mountains to the south, mostly through the Mojave River channel. The primary sources of discharge are pumping wells and evapotranspiration.

California↗

USGS2020

Groundwater withdrawals and regional flow paths at and near Willow Grove and Warminster, Pennsylvania—Data compilation and preliminary simulations for conditions in 1999, 2010, 2013, 2016, and 2017

In 2014, groundwater samples from residential and public supply wells in the vicinity of two former U.S. Navy bases at Willow Grove and Warminster, and an active Air National Guard Station at Horsham, Bucks and Montgomery Counties, Pennsylvania, were found to have concentrations of perfluorooctanoic acid (PFOA) and perfluorooctane sulfonate (PFOS), which are per- and polyfluoroalkyl substances (PFAS), above U.S. Environmental Protection Agency (EPA) provisional health advisory (HA) levels for drinking water. Five supply wells near the bases were shut down because of PFAS contamination. In 2016, after EPA established a Lifetime HA for PFAS in drinking water that is lower than the provisional HA in place in 2014, at least 13 additional supply wells near the bases were shut down because of PFAS contamination. At the request of the U.S. Navy, and in consultation with other Federal and State agencies and local stakeholders, the U.S. Geological Survey used historical and recent data on well withdrawals, recharge rates, aquifer properties, groundwater levels, and stream base flow to evaluate regional groundwater-flow paths from identified areas of PFAS groundwater contamination or potential PFAS sources at the bases. Groundwater withdrawals near the bases from public supply and other large wells decreased substantially from the 1990s to 2017, increasing the proportion of groundwater recharge that discharged to local streams. A preliminary groundwater-flow model, calibrated using 1,009 groundwater levels and 17 stream base flow estimates, simulated regional flow paths from the bases and showed that recharge at the bases discharged to withdrawal wells and local streams, generally within a mile or two of the bases. Supply and remediation wells at the bases captured some of the recharge on base areas of possible PFAS contamination, whereas other base recharge was simulated to flow to nearby public supply wells and streams, depending on water use and aquifer recharge conditions between 1999 and 2017. The locations of many residential wells near the bases that were identified by the Navy and Air National Guard as having elevated PFAS concentrations were generally consistent with the simulated flow paths from possible sources at the bases. However, there are some areas of observed PFAS contamination where no flow paths from base sources were simulated. Additionally, no data were available on PFAS concentrations in groundwater in some areas of simulated flow paths from base sources. Data and models used for this study are provided in this report and in digital data releases to support further investigations and model revisions.

Pennsylvania↗

USGS1979

Water budget and mathematical model of the Coconino Aquifer, southern Navajo County, Arizona

The main source of water in the 3,400-square-mile area of southern Navajo County is the large volume of ground water in storage in the Coconino aquifer, which consists of the Coconino Sandstone, the uppermost part of the underlying Supai Formation, and the overlying Kaibab Limestone. The amount of water withdrawn from the aquifer increased from about 13,800 acre-feet in 1960 to 38,400 acre-feet in 1972. As industrial and agricultural development continues, the amount of withdrawal probably will increase greatly. Aquifer tests indicate that the hydraulic conductivity of the aquifer ranges from 8 to 40 feet per day; however, a flow-net analysis indicates that the hydraulic conductivity may be as much as 80 feet per day in the north-central part of the area. In the southern and central parts of the area the aquifer is unconfined, and the storage coefficient is estimated to be about 0.15. In the northern and eastern parts the aquifer is confined, and the storage coefficient ranges from 0.00013 to 0.0014. A mathematical model was developed to simulate the groundwater system and to provide a management tool for estimating the effects of present and future ground-water withdrawals. The model indicates that the inflow to and outflow from the aquifer were about 105,600 acre-feet in 1960 prior to extensive ground-water development and that about 192,000 acre-feet of water was derived from groundwater storage between 1960 and 1972. The mathematical model provides an approximation of the Coconino aquifer and can be used to estimate the future response of the aquifer.

Arizona↗

USGS2012

Quantification of aquifer properties with surface nuclear magnetic resonance in the Platte River valley, central Nebraska, using a novel inversion method

Surface nuclear magnetic resonance, a noninvasive geophysical method, measures a signal directly related to the amount of water in the subsurface. This allows for low-cost quantitative estimates of hydraulic parameters. In practice, however, additional factors influence the signal, complicating interpretation. The U.S. Geological Survey, in cooperation with the Central Platte Natural Resources District, evaluated whether hydraulic parameters derived from surface nuclear magnetic resonance data could provide valuable input into groundwater models used for evaluating water-management practices. Two calibration sites in Dawson County, Nebraska, were chosen based on previous detailed hydrogeologic and geophysical investigations. At both sites, surface nuclear magnetic resonance data were collected, and derived parameters were compared with results from four constant-discharge aquifer tests previously conducted at those same sites. Additionally, borehole electromagnetic-induction flowmeter data were analyzed as a less-expensive surrogate for traditional aquifer tests. Building on recent work, a novel surface nuclear magnetic resonance modeling and inversion method was developed that incorporates electrical conductivity and effects due to magnetic-field inhomogeneities, both of which can have a substantial impact on the data. After comparing surface nuclear magnetic resonance inversions at the two calibration sites, the nuclear magnetic-resonance-derived parameters were compared with previously performed aquifer tests in the Central Platte Natural Resources District. This comparison served as a blind test for the developed method. The nuclear magnetic-resonance-derived aquifer parameters were in agreement with results of aquifer tests where the environmental noise allowed data collection and the aquifer test zones overlapped with the surface nuclear magnetic resonance testing. In some cases, the previously performed aquifer tests were not designed fully to characterize the aquifer, and the surface nuclear magnetic resonance was able to provide missing data. In favorable locations, surface nuclear magnetic resonance is able to provide valuable noninvasive information about aquifer parameters and should be a useful tool for groundwater managers in Nebraska.

Nebraska↗

USGS2022

Groundwater-level contour map of Fauquier County, Virginia, October-November 2018

Groundwater withdrawals provide most public-water supplies and all private-domestic users in Fauquier County, Virginia, a fast-growing rural area southwest of Washington, D.C. Groundwater levels were measured in 129 wells during a county-wide synoptic survey from October 29 through November 2, 2018. Field measurements, combined with datapoints from the National Hydrography Dataset, were used to develop a county-wide groundwater-level contour map. Groundwater levels and withdrawals during the synoptic survey were near or slightly above long-term medians. Error analysis indicated that the estimated groundwater-level contours generally were lower than observed measurements, with a root-mean-squared error of 33.52 feet. Groundwater levels in Fauquier County are controlled largely by topography: low levels in the crystalline Blue Ridge aquifers in the northwestern part of the county contrast markedly with higher levels in the sedimentary Mesozoic Basin aquifers in the southeast. At current levels of groundwater withdrawal, and at the scale and scope of the synoptic survey, no cones of depression in the groundwater surface were detected. The Fauquier County groundwater-level contour map is available as a U.S. Geological Survey data release.

Virginia↗

USGS2012

TracerLPM (Version 1): An Excel® workbook for interpreting groundwater age distributions from environmental tracer data

TracerLPM is an interactive Excel® (2007 or later) workbook program for evaluating groundwater age distributions from environmental tracer data by using lumped parameter models (LPMs). Lumped parameter models are mathematical models of transport based on simplified aquifer geometry and flow configurations that account for effects of hydrodynamic dispersion or mixing within the aquifer, well bore, or discharge area. Five primary LPMs are included in the workbook: piston-flow model (PFM), exponential mixing model (EMM), exponential piston-flow model (EPM), partial exponential model (PEM), and dispersion model (DM). Binary mixing models (BMM) can be created by combining primary LPMs in various combinations. Travel time through the unsaturated zone can be included as an additional parameter. TracerLPM also allows users to enter age distributions determined from other methods, such as particle tracking results from numerical groundwater-flow models or from other LPMs not included in this program. Tracers of both young groundwater (anthropogenic atmospheric gases and isotopic substances indicating post-1940s recharge) and much older groundwater (carbon-14 and helium-4) can be interpreted simultaneously so that estimates of the groundwater age distribution for samples with a wide range of ages can be constrained. TracerLPM is organized to permit a comprehensive interpretive approach consisting of hydrogeologic conceptualization, visual examination of data and models, and best-fit parameter estimation. Groundwater age distributions can be evaluated by comparing measured and modeled tracer concentrations in two ways: (1) multiple tracers analyzed simultaneously can be evaluated against each other for concordance with modeled concentrations (tracer-tracer application) or (2) tracer time-series data can be evaluated for concordance with modeled trends (tracer-time application). Groundwater-age estimates can also be obtained for samples with a single tracer measurement at one point in time; however, prior knowledge of an appropriate LPM is required because the mean age is often non-unique. LPM output concentrations depend on model parameters and sample date. All of the LPMs have a parameter for mean age. The EPM, PEM, and DM have an additional parameter that characterizes the degree of age mixing in the sample. BMMs have a parameter for the fraction of the first component in the mixture. An LPM, together with its parameter values, provides a description of the age distribution or the fractional contribution of water for every age of recharge contained within a sample. For the PFM, the age distribution is a unit pulse at one distinct age. For the other LPMs, the age distribution can be much broader and span decades, centuries, millennia, or more. For a sample with a mixture of groundwater ages, the reported interpretation of tracer data includes the LPM name, the mean age, and the values of any other independent model parameters. TracerLPM also can be used for simulating the responses of wells, springs, streams, or other groundwater discharge receptors to nonpoint-source contaminants that are introduced in recharge, such as nitrate. This is done by combining an LPM or user-defined age distribution with information on contaminant loading at the water table. Information on historic contaminant loading can be used to help evaluate a model's ability to match real world conditions and understand observed contaminant trends, while information on future contaminant loading scenarios can be used to forecast potential contaminant trends.

Techniques and Methods↗

USGS1987

Regional Aquifer-System Analysis Program of the US Geological Survey; bibliography, 1978-86

The Regional Aquifer-System Analysis Program of the U.S. Geological Survey was initiated in 1978. The purpose of this program is to define the regional geohydrology and establish a framework of background information on geology, hydrology, and geochemistry of the Nation 's important aquifer systems. This information is needed to develop an understanding of the Nation 's major groundwater flow systems and to support better groundwater resources management. As of 1986, investigations of 28 regional aquifer systems were planned, investigations of 9 regional aquifer systems were completed, and 11 regional aquifer systems were being studied. This report is a bibliography of reports completed under the Regional Aquifer-System Analysis Program from 1978 through 1986. The reports resulting from each regional aquifer-system study are listed after an introduction to the study. During 1978-86, 488 reports were completed under the Regional Aquifer-System Analysis Program, and 168 reports which were partially funded by the Regional Aquifer-System Analysis Program were completed under the National Research Program. (Author 's abstract)

Water-Resources Investigations Report↗

USGS2018

Interstate water management of a “hidden” resource - Physical principles of groundwater hydrology

Groundwater systems are dynamic geologic environments in which water continuously flows from recharge areas to discharge areas at streams, springs, wetlands, coastal waters, and wells. Natural, predevelopment conditions within groundwater systems are changed by the introduction of wells and other human stresses that modify existing groundwater levels, flow paths, and hydrologic budgets. Groundwater serves the Nation as an important water supply, but in some instances such stresses can have adverse impacts that include excessive ground water-level declines, aquifer-storage reductions, and streamflow depletions. Many of the Nation’s aquifer systems extend over thousands of square miles and their hydrologic boundaries may be distant from jurisdictional boundaries that can be the focus of groundwater disputes. Effective interstate management of groundwater resources is benefited by an understanding of the regional-scale controls that affect groundwater conditions at the local scale. Numerical models are the most effective approach for accounting for all of the relevant hydrologic processes that affect groundwater systems and their response to natural and manmade stresses. This paper provides a brief background on some of the basic principles of groundwater hydrology that are relevant to interstate management of this important natural resource.

Conference Paper↗

USGS1983

Groundwater observation network design for the Kansas groundwater management districts, U.S.A.

Concerns about the efficiency and economic soundness of the Kansas groundwater monitoring program led to a systematic redesign of this network, a tentative phase of which is presented in this study. The objectives of this paper include monitoring of major aquifers within each groundwater management district at a spatially more uniform level of accuracy, elimination of redundant measurements and optimization of the information gained from each observation well. The theory of regionalized variables is employed to estimate the amount of spatial variability of the water table, on which the network design is based. This study shows that it is not practical to attempt to reduce the already existing level of uncertainty uniformly throughout the various districts; to do so would tremendously increase the cost of well monitoring, which is already very high. Assuming that the currently existing network is satisfactory for the State's objectives, a reduced network consisting of one well every 6.4 km is equally satisfactory. The reduced network yields district-wide maps that do not differ significantly from those produced using the present network and at the same time it reduces the already-existing network by 18–47%. Therefore, adoption of a rearranged square well network is recommended, which is reduced to a 6.4-km spacing to achieve both a uniform level of information about the water table and a minimum required accuracy.

Kansas↗

USGS1987

The local effects of groundwater pumpage within a fault-influenced groundwater basin, Ash Meadows, Nye County, Nevada, U.S.A.

Large-scale groundwater pumpage and water-level decline data are used in a preliminary attempt to identify the hydraulic connection between several wells and Devils Hole, a small pond in Nye County, Nevada, U.S.A. Results indicate that despite the discontinuous nature of the local aquifers, many wells have good hydraulic connection with Devils Hole. Hydraulic connection between the wells and Devils Hole exhibits a complex spatial variability typical of carbonate terrane. Zones or directions of minimal hydraulic connection may result from fault-controlled structural discontinuities. Zones or directions of enhanced hydraulic connection point to the presence of large-scale groundwater flow through fractures or conduits. The orientation of waterbearing fractures or conduits inferred from this study is qualitatively consistent with the major orientation of local and regional structural features.

Nevada↗

USGS2003

Spatial variability of groundwater recharge and its effect on shallow groundwater quality in southern New Jersey

Point estimates of groundwater recharge at 48 sediment-coring locations vary substantially (−18.5–1840 cm yr −1 ) in a 930-km 2 area of southern New Jersey. Darcian estimates of steady, long-term recharge made at depth in the unsaturated zone were estimated using pedotransfer functions of soil texture and interpolated (mapped) with nonparametric methods to assess aquifer vulnerability in the area. The probability of exceeding the median recharge (29.1 cm yr −1 ) is low in the southwestern and northeastern portions of the study area and high in the eastern and southeastern portions. Estimated recharge is inversely related to measured percentage clay and positively related to the percentage of well-drained soils near wells. Spatial patterns of recharge estimates, exceedance probabilities, and clay content indicate that sediment texture controls recharge in the study area. Relations with land elevation and a topographic wetness index were statistically insignificant. Nitrate concentration and atrazine (6-chloro- N 2 -ethyl- N 4 -isopropyl-1,3,5-triazine-2,4-diamine) percentage detection in samples of shallow groundwater (typically <10 m) are higher for low recharge sites (≤29.1 cm yr −1 ) than for high recharge sites (>29.1 cm yr −1 ) in agricultural and urban areas. Differences between high and low recharge sites in these areas are highly significant for NO 3 concentration, but not for atrazine concentration.

New Jersey↗

USGS2013

Groundwater resources of the Wood River Valley, Idaho--A groundwater-flow model for resource management

The U.S. Geological Survey (USGS), in collaboration with the Idaho Department of Water Resources (IDWR), will use the current understanding of the Wood River Valley aquifer system to construct a MODFLOW numerical groundwater-flow model to simulate potential anthropogenic and climatic effects on groundwater and surface-water resources. This model will serve as a tool for water rights administration and water-resource management and planning. The study will be conducted over a 3-year period from late 2012 until model and report completion in 2015.

Idaho↗

USGS2026

Groundwater tracing used to delineate recharge areas and map karst groundwater pathways for subterranean streams at Oregon Caves National Monument and Preserve

Oregon Caves National Monument and Preserve in southwestern Oregon is a 4,554-acre area managed by the National Park Service that is home to several cave systems, including Oregon Caves, which is the longest cave in Oregon, with 3.03 miles of mapped passages. Because of the interconnected nature of karst hydrologic systems, it is critical to understand the areas that can influence water quality and quantity in karst environments. Toward this goal, dye tracing was conducted by the U.S. Geological Survey from 2021 to 2024 to better understand the pathways that karst groundwater follows at Oregon Caves National Monument and Preserve and to delineate recharge areas for two caves, Oregon Caves and Cave Next Door. During the project, eight dye injections were conducted, delineating a 0.51-square-mile recharge area for Oregon Caves and a 0.69-square-mile recharge area for Cave Next Door. Additionally, the study helped to identify three resurgences associated with Oregon Caves that were previously unknown and showed that the recharge areas for the two caves were distinct from one another. The dye traces also illuminated some unique recharge characteristics of the karst at Oregon Caves, including a high variance in karst groundwater velocities, retention within the karst aquifers, and a significant diffuse-flow component.

Oregon↗

USGS2002

Estimates of recharge to unconfined aquifers and leakage to confined aquifers in the seven-county metropolitan area of Minneapolis-St. Paul, Minnesota

Recharge to unconfined aquifers in the seven-county Twin Cities metropolitan area of Minnesota was estimated by five methods. Mean recharge estimated as a percentage (27 percent) of precipitation ranged from 7.7 to 8.3 in./yr across the study area. The median recharge estimated from automated analyses of streamflow-recession displacements for seven basins ranged from 1.2 to 12.2 in./yr. Median recharge estimated from graphical analyses of groundwater level fluctuations for 11 wells ranged from 4.5 to 13.6 in./yr. Recharge estimated by age dating of shallow ground water at a nested well site was 8.8 in./yr. Minimal ground-water recharge estimated by statistical analyses of watershed characteristics (geologic data and streamflow records) ranged from less than 0.1 to 5.6 in./yr. Leakage, considered recharge to confined aquifers, in the seven-county Twin Cities metropolitan area was estimated by two methods. Leakage estimated by analyses of ground-water level fluctuations for 11 wells ranged from 3.2x10 -3 to 1.1x10 -2 in./yr. Leakage estimated by analyses of vertical-hydraulic gradients based on application of the Darcy flow equation for seven nested well sites ranged from 4.6x10 -5 to 1.1x10 -1 in./yr. Recharge estimates, which generally varied within 10 in./yr for each of the methods, generally were largest based on the precipitation, ground-water level fluctuation, and age dating of shallow ground water methods, slightly smaller based on the streamflow-recession displacement method, and smallest based on the watershed characteristics method. Leakage, which was less than 1 in./yr, varied within 1 order of magnitude based on the ground-water level fluctuation method and as much as 4 orders of magnitude based on analyses of vertical-hydraulic gradients.

Minnesota↗

USGS2025

Accurate simulation of flow through dipping aquifers with MODFLOW 6 using enhanced cell connectivity

In simulations of groundwater flow through dipping aquifers, layers of model cells are often “deformed” to follow the top and bottom elevations of the aquifers. When this approach is used in MODFLOW, adjacent cells within the same model layer are vertically offset from one another, and the standard conductance-based (two-point) formulation for flow between cells does not rigorously account for these offsets. The XT3D multi-point flow formulation in MODFLOW 6 is designed to account for geometric irregularities in the grid, including vertical offsets, and to provide accurate results for both isotropic and anisotropic groundwater flow. A recent study evaluated the performance of the standard formulation and XT3D using a simple, synthetic benchmark model of a steeply dipping aquifer. Although XT3D generally improved the accuracy of flow simulations relative to the standard formulation as expected, neither formulation produced accurate flows in cases that involved large vertical offsets. In this paper, we explain that the inability of XT3D to produce accurate flows in the steeply dipping aquifer benchmark was not due to an inherent limitation of the flow formulation, but rather to the limited cell connectivity inherent in the most commonly used discretization packages in MODFLOW 6. Furthermore, we demonstrate that XT3D is able to produce the expected accuracy when adequate cell connectivity is introduced using MODFLOW's unstructured grid type and the aquifer is discretized vertically using at least two model layers.

Groundwater↗

USGS2000

Determining timescales for groundwater flow and solute transport

One of the principal uses of environmental tracers is for determining the ages of soil waters and groundwaters. (We may refer to this as ‘hydrochronology’by analogy with the dating of solid materials known as geochronology.) Information on soil water and groundwater age enables timescales for a range of subsurface processes to be determined. For example, ‘groundwater stratigraphy’is used increasingly to decipher past recharge rates and conditions in unconfined aquifers, in much the same way that sedimentary stratigraphy yields information about past depositional environments. The use of environmental tracers to determine water ages allows groundwater recharge rates and flow velocities to be determined independently, and commonly more accurately, than with traditional hydraulic methods where hydraulic properties of aquifers are poorly known or spatially variable. Studies of groundwater residence times in association with groundwater contamination studies can enable historic release rates of contaminants and contaminant transport rates to be determined. Where input rates are known, measurements of groundwater contaminant concentrations, together with groundwater dating, can sometimes be used for estimating chemical reaction rates. The combination of these dating methods with stable isotope measurements has sometimes allowed changes in contaminant sources over time to be determined.

Book chapter↗

USGS2020

Rethinking groundwater flow on the South Rim of the Grand Canyon, USA: Characterizing recharge sources and flow paths with environmental tracers

In the arid landscape south of the Grand Canyon, natural springs and seeps are a critical resource for endemic species and Native American tribes. Groundwater is potentially threatened by expanding populations, visitations, and mineral extraction activities. Environmental tracers including noble gases, stable isotopes of hydrogen and oxygen in water, tritium, and carbon-14 were used to characterize recharge sources and flow paths in South Rim aquifers. Results confirm the regional Redwall-Muav Aquifer as the primary groundwater source to springs. However, a second local recharge source is required to explain the detection of tritium. Two probable sources are identified as: low-elevation infiltration of surface run-off with warm noble gas recharge temperatures, high excess air, and relatively low fractions of winter recharge, and high-elevation plateau recharge with cool recharge temperatures, low excess air, and fraction of winter recharge of ~ 1. Previous investigators have linked spring occurrence with regional faults and fractures. We show such features are also the likely control chemical mixing between the regional and local groundwater sources, the transport of deeply sourced and local recharge fluids, groundwater age, and thus the relative vulnerability of groundwater to depletion and contamination. The new conceptual model of groundwater sources and flow paths suggest many South Rim springs may respond on the order of 10s to 100s of years to groundwater depletion and contamination, even though the majority of groundwater flow is along longer flow paths with longer lag times. The magnitude of response to short term changes in the flow system remains unclear.

Arizona↗

USGS1987

Origins of seawater intrusion in a coastal aquifer - A case study of the Pajaro Valley, California

Seawater may enter and contaminate stratified coastal aquifers through a number of different pathways. These pathways and their relative contribution are examined in the Pajaro Valley, California, a coastal area with extensive groundwater development. This study considers three pathways of possible intrusion of the primary confined aquifer: (1) onshore leakage from brackish sources, the estuary and sloughs, through the confining layer; (2) near-shore leakage from the ocean through the confining layer; and (3) offshore flow from the ocean through the submarine canyon outcrop of the aquifer. Groundwater flow and seawater intrusion are simulated using an areal, two-dimensional solute-transport computer model. This analysis indicates that leakage through confining layers is the principal mechanism of recharge to the aquifer. Although lateral flow through the offshore outcrop contaminates the aquifer, as a whole, at a higher rate, vertical leakage through the sea floor initially is the main pathway of seawater intrusion to the onshore portion of the aquifer. It is likely that leakage generally is the dominant mechanism of recharge and initial cause of seawater intrusion for poorly-confined, stratified coastal aquifers. This analysis suggests that a significant time interval follows the initial observation of seawater intrusion, during which remedial action can be taken to control lateral flow through the offshore outcrop, which ultimately will be the largest component of future intrusion in these aquifers.

California↗