Geology topics

Groundwater & aquifers

Find USGS groundwater and aquifer publications. Search an aquifer name or place, compare source-supplied dates and open reports for hydrogeology, recharge and water-level studies.

Follow this topic with RSS

At least 1,225 records · Page 68Linked to original sources

USGS1987

Preliminary assessment of water quality and its relation to hydrogeology and land use: Potomac-Raritan-Magothy aquifer system, New Jersey

The relation of water quality to hydrogeology and land use was evaluated using analysis of water samples from 71 wells in the northern part of the Potomac-Raritan-Magothy aquifer system in New Jersey. The sampling network was evaluated for variations in hydrogeology. Well depths, pumping rates, and the number of wells in the confined and unconfined parts of the aquifer system did not differ among land-use groups. The influences of hydrogeologic factors on water quality were evaluated without considering land use. Shallow wells had the highest specific conductance and major ion concentrations. Water from wells in the unconfined part of the aquifer system had the highest dissolved organic carbon concentration. Dissolved oxygen and nitrate concentrations were lowest, trace metals concentrations were highest, and phenols were detected most frequently in groundwater from undeveloped land. Major ions and trace metals concentrations were lowest, dissolved oxygen and copper concentrations were highest, and pesticides were most frequently detected in groundwater from agricultural land. Nitrate concentrations were highest and orthophosphate, nitrite, and purgeable organics were detected most frequently in groundwater from urban land. These water quality data were compared to data from the same aquifer system in southern New Jersey. Frequencies of detection of purgeable organics among land-use groups were similar in the northern and southern areas.

New Jersey↗

USGS2015

Sequence stratigraphic framework of upper pliocene to holocene sediments of the Los Angeles Basin, California: Implications for aquifer architecture

Executive Summary Groundwater provides more than one-third of the municipal water supply for the coastal Los Angeles Basin and defining the aquifer architecture is a high priority for ground-water managers. Sequence stratigraphy, the state-of-the-art method for delineating reservoir geometry and continuity in the petroleum industry, is now being incorporated into ground water resource assessments and environmental investigations. By evaluating subsurface data using sequence stratigraphy, the geometry and distribution of aquifer and aquitard sediments are linked to the original depositional processes that formed the sediments. Skyline Ridge, Inc., the U.S. Geological Survey (USGS), in cooperation with Los Angeles County Department of Public Works (LACDPW) and the Water Replenishment District of Southern California (WRDSC) completed an investigation of the Wilmington – Long Beach area by integrating data from new exploratory research boreholes, marine reflection seismic, vintage land reflection seismic, and high-resolution gravity measurements. Sequence stratigraphy is shown to define pathways for saltwater intrusion into freshwater coastal aquifers by integrating preexisting data with (1) the new borehole observations and (2) structural and physical properties data derived from the geophysical measurements. By constructing a series of seismic reflection and well log cross sections (presented as sheets), this investigation further defines and delineates ten sequences of Late Pliocene to Holocene age in the Wilmington – Long Beach area of the Los Angeles Basin. These sequences were first described by Ponti and others (2007), and the implications for sea water intrusion was discussed by Edwards and others (2009a). In addition, this investigation presents regional seismic facies – environment of deposition maps for the five youngest sequences: 1) the Dominquez Sequence; 2) the Mesa Sequence; 3) the Pacific Sequence; the Harbor Sequence; and 4) the Bent Spring Sequence. The stratigraphic framework established in the Wilmington – Long Beach area is extended into the Central Basin of the greater Los Angeles area by utilizing 1980s and older vintage petroleum exploration land seismic reflection data. Tying this data to the available groundwater monitoring well network in the Central and West Coast Basins demonstrate aquifer correlation problems, and may provide insights into establishing a more robust groundwater model for the greater Los Angeles Basin area.

Book↗

USGS1987

Estimation of the recharge area contributing water to a pumped well in a glacial-drift, river-valley aquifer

The highly permeable, unconfined, glacial drift aquifers that occupy most New England river valleys constitute the principal source of drinking water for many communities that obtain part or all of their public water supply from groundwater. Analytical , two-dimensional numerical and three-dimensional numerical models were used to delineate contributing areas of groundwater pollution. These methods of analysis were compared by applying them to hypothetical aquifer having the dimensions and geometry of a typical glacial drift, river valley aquifer. In the model analyses, factors that control the size and shape of a contributing area were varied over ranges of values common to glacial drift aquifers in New England. These controlling factors include the rate of well discharge, rate of recharge to the aquifer from precipitation and from adjacent till and bedrock uplands, distance of a pumping well from a stream or other potential source of induced recharge, degree of hydraulic connection of the aquifer with a stream, horizontal hydraulic conductivity of the aquifer, ratio of horizontal to vertical hydraulic conductivity, and degree of well penetration. Numerical models of valley aquifers are deemed best suited to determine the approximate contributing area of a well because of their capability to simulate more accurately the variable geohydrologic conditions typical of glacial drift valley aquifers. On the basis of results obtained with the two-dimensional numerical model, for which a wide range of hydrologic conditions were simulated, the contributing area in a typical glacial drift, river valley setting for a well pumped at a rate of 1.0 million gal/day--a common pumping rate--can be expected to range from about 0.9 to 1.8 sq mi. Model analysis also shows that the contributing area of pumped wells may be expected to extend to the opposite side of the river and to include significant areas of till uplands adjacent to the aquifer on both sides of the valley. Simulations with the three-dimensional model allow a full delineation of the zone of contribution for a pumped well. For the relatively thin (100 ft or less) unconfined aquifers considered in this analysis, the model showed that the zone of contribution extended throughout the entire saturated thickness of aquifer. (Lantz-PTT)

Open-File Report↗

USGS1993

Saltwater in shallow aquifers in east-central and northeastern Louisiana and southeastern Arkansas

The chemistry of water from irrigation and monitor wells in east-central Louisiana indicates the presence of saltwater in the Mississippi River alluvial aquifer and the uppermost part of the Jasper aquifer system. The salinity of this groundwater makes it unsuitable for use in irrigation of salt-sensitive crops. The geochemistry of bromide (Br) and chloride (Cl) ions and strontium (Sr) isotopes indicated that this saltwater could have originated from the mixing of freshwater with briny water originating from the Carrizo-Wilcox aquifer at altitudes from 5,800 to 6,800 feet below sea level. However, in the absence of data on the concentrations of Br and Cl ions and the values of (87)Sr/(86)Sr in water from the Catahoula, Cockfield, and Sparta aquifers within the study area, no conclusive statement can be made on the origin of saltwater in the alluvial aquifer and the uppermost part of the Jasper aquifer system. Analyses of water from irrigation wells in northeastern Louisiana and southeastern Arkansas indicated the presence of saltwater in the Mississippi River alluvial aquifer. Saltwater probably moves from southern Chicot County, Arkansas, into northeastern Louisiana by flowing to the southwest along a fluvial channel eroded into the Cockfield Formation. Saltwater in the Mississippi River alluvial aquifer in northeastern Louisiana and southeastern Arkansas can be hazardous to salt-sensitive crops, such as rice, when used for irrigation. The geochemistry of Br and Cl ions indicated that saltwater in the Mississippi River alluvial aquifer of southern Chicot County in southeastern Arkansas has two geochemically distinct sources. One source, which has Br/Cl ratios less than that of modern seawater, could be derived from saltwater present in aquifers of Tertiary age; this saltwater could enter the alluvial aquifer by upward flow from below as part of the natural regional groundwater flow pattern. The other source, which has Br/Cl ratios greater than that of modern sea- water, could be derived, in part, from briny water present in the Smackover Formation at altitudes from 5,500 to 6,500 feet below sea level. This briny water could enter the alluvial aquifer by upward migration along a fault that penetrates from near land surface into the Smackover Formation.

Open-File Report↗

USGS1996

Summary of the Snake River plain Regional Aquifer-System Analysis in Idaho and eastern Oregon

Regional aquifers underlying the 15,600-square-mile Snake River Plain in southern Idaho and eastern Oregon was studied as part of the U.S. Geological Survey's Regional Aquifer-System Analysis program. The largest and most productive aquifers in the Snake River Plain are composed of Quaternary basalt of the Snake River Group, which underlies most of the 10,8000-square-mile eastern plain. Aquifer tests and simulation indicate that transmissivity of the upper 200 feet of the basalt aquifer in the eastern plain commonly ranges from about 100,000 to 1,000,000 feet squared per day. However, transmissivity of the total aquifer thickness may be as much as 10 million feet squared per day. Specific yield of the upper 200 feet of the aquifer ranges from about 0.01 to 0.20. Average horizontal hydraulic conductivity of the upper 200 feet of the basalt aquifer ranges from less than 100 to 9,000 feet per day. Values may be one to several orders of magnitude higher in parts in individual flows, such as flow tops. Vertical hydraulic conductivity is probably several orders of magnitude lower than horizontal hydraulic conductivity and is generally related to the number of joints. Pillow lava in ancestral Snake River channels has the highest hydraulic conductivity of all rock types. Hydraulic conductivity of the basalt decreases with depth because of secondary filling of voids with calcite and silica. An estimated 80 to 120 million acre-feet of water is believed to be stored in the upper 200 feet of the basalt aquifer in the eastern plain. The most productive aquifers in the 4,800-square-mile western plain are alluvial sand and gravel in the Boise River valley. Although aquifer tests indicate that transmissivity of alluvium in the Boise River valley ranges from 5,000 to 160,000 feet squared per day, simulation suggests that average transmissivity of the upper 500 feet is generally less than 20,000 feet squared per day. Vertically averaged horizontal hydraulic conductivity of the upper 500 feet of alluvium ranges from about 4 to 40 feet per day; higher values can be expected in individual sand and gravel zones. Vertical hydraulic conductivity is considerably lower because of the presence of clay layers. Hydraulic heads measured in piezometers, interpreted from diagrams showing ground-water flow and equipotential lines and estimated by computer simulation, demonstrate that water movement is three dimensional through the rock framework. Natural recharge takes place along the margins of the plain where head decreases with depth; discharge takes place near some reaches of the Snake River and the Boise River where head increases with depth. Geothermal water in rhyolitic rocks in the western plain and western part of the eastern plain has higher hydraulic head than the overlying cold water. Geothermal water, therefore, moves upward and merges into the cold-water system. Basin water-budget analyses indicate that the volume of cold water. Carbon-14 age determinations, which indicate that residence time of geothermal water is 17,700 to 20,300 years, plus or minus 4,000 years, imply slow movement of water through the geothermal system. Along much of its length, the Snake River gains large quantities of ground water. On the eastern plain, the river gained about 1.9 million acre-feet of water between Blackfoot and Neeley, Idaho, in 1980. Between Milner and King Hill, Idaho, the river gained 4.7 million acre-feet, mostly as spring flow from the north side. Upstream from Blackfoot and in the vicinity of Lake Walcott, the rover loses flow to ground water during parts or all of the year. On the western plain, river gains from ground water are small relative to those on the eastern plain; most are from seepage. Streams in tributary drainage basins supply calcium/bicarbonate type and calcium/magnesium/bicarbonate type water to the plain. Water type is a reflection of the chemical composition of rocks in the drainage basin, Concentrations of dissolved solids are smallest, about 50 milligrams per liter, in streams such as the Boise River that drain areas of granitic rocks; concentrations are greatest, about 400 milligrams per liter, in streams such as the Owyhee and Raft Rivers that drain area of sedimentary rocks. Water chemistry reflects the interaction of surface water and ground water. The chemical composition of ground water in the plain is essentially the same as that in streamflow and groundwater discharge from tributary drainage basins. Tributary drainage basins supplied 85 percent of the ground-water recharge in the eastern plain during 1980 and a nearly equivalent percentage of the solute load in ground water; human activities and dissolution of minerals supplied the other solutes. Dissolved-solids concentrations in ground water were generally less than 400 milligrams per liter. Water from the lower geothermal system is chemically different from water from the upper cold-water system. Geothermal water typically has greater concentrations of sodium, bicarbonate, sulfate, chloride, fluoride, silica, arsenic, boron, and lithium and smaller concentrations of calcium, magnesium, and hydrogen. Difference are attributed to ion exchange as geothermal moves through the rock framework. Irrigation, mostly on the Snake River Plain, accounted for about 96 percent of consumptive water use in Idaho during 1980. The use of surface water for irrigation for more than 100 years has caused major changes in the hydrologic system on the plain. Construction of dams, reservoirs, and diversifications effected planned changes in the surface-water system but resulted in largely unplanned changes in the ground-water system. During those years of irrigation, annual recharge in the main part of the eastern plain increased to about 6.7 million acre-feet in 1980, or by about 70 percent. Most of the increase was from percolation of surface water diverted for irrigation. From preirrigation to 1952, groundwater storage increased about 24 million acre-feet, and storage decreased from 1952 to 1964 and from 1976 to 1980 because of below-normal precipitation and increased withdrawals of ground water for irrigation. Annual ground-water discharge increased to about 7.1 million acre-feet in 1980, or about 80 percent since the start of irrigation. About 10 percent of the 1980 total discharge was ground-water pumpage. About 3.1 million acres, or almost one-third of the plain, was irrigated during 1980: 2.0 million acres with surface water, 1.0 million acres with ground water, and 0.1 million acres with combined surface and ground water. About 8.9 million acre-feet of Snake River water was diverted for irrigation during 1980 and 2.3 million acre-feet of ground water was pumped from 5,300 wells. Most irrigation wells on the eastern plain are open to basalt. About two-thirds of them yield more than 1,500 gallons per minute with a reported maximum of 7,240 gallons per minute; drawdown is less than 20 feet in two-thirds of the wells. Most irrigation wells on the western plain are open to sedimentary rocks. About one-third of them yield more than 1,00 gallons per minute with a reported maximum of 3,850 gallons per minute; drawndown is less than 20 feet in about one-fifth of the wells. The major instream use of water on the Snake River Plain is hydroelectric power generation. Fifty-two million acre-feet of water generated 2.6 million megawatthours of electricity during 1980. Digital computer ground-water flows models of the eastern and western plain reasonably simulated regional changes in water levels and ground-water discharges from 1880 (preirrigation) to 1980. Model results support the concept of three-dimensional flow and the hypotheses of no underflow between the eastern and western plain. Simulation of the regional aquifer system in the eastern plain indicates that is 1980 hydrologic conditions, including pumpage, were to remain the same for another 30 years, moderate declines in ground-water levels and decreases in spring discharges would continue. Increased ground-water pumpage to irrigate an additional 1 million acres could cause ground-water levels to decline a few tens of feet in the central part of the plain and could cause corresponding decreases in ground-water discharge. A combination of actions such as increased ground-water pumpage and decreased use of surface water for irrigation (resulting in reduced recharge) would accentuate the changes.

Idaho;Oregon↗

USGS2017

Groundwater quality for 75 domestic wells in Lycoming County, Pennsylvania, 2014

Groundwater is a major source of drinking water in Lycoming County and adjacent counties in north-central and northeastern Pennsylvania, which are largely forested and rural and are currently undergoing development for hydrocarbon gases. Water-quality data are needed for assessing the natural characteristics of the groundwater resource and the potential effects from energy and mineral extraction, timber harvesting, agriculture, sewage and septic systems, and other human influences. This report, prepared in cooperation with Lycoming County, presents analytical data for groundwater samples from 75 domestic wells sampled throughout Lycoming County in June, July, and August 2014. The samples were collected using existing pumps and plumbing prior to any treatment and analyzed for physical and chemical characteristics, including nutrients, major ions, metals and trace elements, volatile organic compounds, gross-alpha particle and gross beta-particle activity, uranium, and dissolved gases, including methane and radon-222. Results indicate groundwater quality generally met most drinking-water standards, but that some samples exceeded primary or secondary maximum contaminant levels (MCLs) for arsenic, iron, manganese, total dissolved solids (TDS), chloride, pH, bacteria, or radon-222. Arsenic concentrations were higher than the MCL of 10 micrograms per liter (µg/L) in 9 of the 75 (12 percent) well-water samples, with concentrations as high as 23.6 μg/L; arsenic concentrations were higher than the health advisory level (HAL) of 2 μg/L in 23 samples (31 percent). Total iron concentrations exceeded the secondary maximum contaminant level (SMCL) of 300 μg/L in 20 of the 75 samples. Total manganese concentrations exceeded the SMCL of 50 μg/L in 20 samples and the HAL of 300 μg/L in 2 of those samples. Three samples had chloride concentrations that exceeded the SMCL of 250 milligrams per liter (mg/L); two of those samples exceeded the SMCL of 500 mg/L for TDS. The pH ranged from 5.3 to 9.15 and did not meet the SMCL range of 6.5 to 8.5 in 22 samples, with 17 samples having a pH less than 6.5 and 8 samples having pH greater than 8.5. Generally, the samples that had elevated TDS, chloride, or arsenic concentrations had high pH. Total coliform bacteria were detected in 39 of 75 samples (52 percent), with Escherichia coli detected in 10 of those 39 samples. Radon-222 activities ranged from non-detect to 7,420 picocuries per liter (pCi/L), with a median of 863 pCi/L, and exceeded the proposed drinking-water standard of 300 pCi/L in 50 (67 percent) of the 75 samples; radon-222 activities were higher than the alternative proposed standard of 4,000 pCi/L in 3 samples. Water from 15 of 75 (20 percent) wells had concentrations of methane greater than the reporting level of 0.01 mg/L; detectable methane concentrations ranged from 0.04 to 16.8 mg/L. Two samples had methane concentrations (13.1 and 16.8 mg/L) exceeding the action level of 7 mg/L. Low levels of ethane (up to 0.12 mg/L) were present in the five samples with the highest methane concentrations (near or above 1 mg/L) that were analyzed for hydrocarbon compounds and isotopic composition. The isotopic composition of methane in four of these groundwater samples, from the Catskill and Lock Haven Formations and the Hamilton Group, have sample carbon isotopic ratio delta values (carbon-13/carbon-12) ranging from –42.36 to –36.08 parts per thousand (‰) and hydrogen isotopic ratio delta values (deuterium/protium) ranging from –212.0 to –188.4 ‰, which are consistent with the isotopic compositions reported for mud-gas logging samples from these geologic units and a thermogenic source of the methane. However, the isotopic composition and ratios of methane to ethane in a fifth sample indicate the methane in that sample may be of microbial origin that subsequently underwent oxidation. The fifth sample had the highest concentration of methane, 16.8 mg/L, with an carbon isotopic ratio delta values of -50.59 ‰ and a hydrogen isotopic ratio delta values of -209.7 ‰. The six well-water samples with the highest methane concentrations also had among the highest pH values (8.25 to 9.15) and elevated concentrations of sodium, lithium, boron, fluoride, arsenic, and bromide. Relatively elevated concentrations of some other constituents, such as barium, strontium, and chloride, commonly were present in, but not limited to, those well-water samples with elevated methane. Three of the six groundwater samples with the highest methane concentrations had chloride/bromide ratios that indicate mixing with a small amount of brine (0.02 percent or less) similar in composition to those reported at undetermined depth below the freshwater aquifer and for gas and oil well brines in Pennsylvania. The sample with the highest methane concentration and most other samples with low methane concentrations (less than about 1 mg/L) have chloride/bromide ratios that indicate predominantly anthropogenic sources of chloride, such as road-deicing salt, septic systems, and (or) animal waste. Brines that are naturally present may originate from deeper parts of the aquifer system, while anthropogenic sources are more likely to affect shallow groundwater because they occur on or near the land-surface. The spatial distribution of groundwater compositions generally indicate that (1) uplands along the western border of Lycoming County usually have dilute, slightly acidic oxygenated, calcium-bicarbonate type waters; (2) intermediate altitudes or areas of carbonate bedrock usually have water of near neutral pH, with highest amounts of hardness (calcium and magnesium); (3) stream valleys, low elevations where groundwater may be discharging, and deep wells in uplands usually have water with pH values greater than 8 and highest arsenic, sodium, lithium, bromide concentrations. Geochemical modeling indicated that for samples with elevated pH, sodium, lithium, bromide, and alkalinity, the water chemistry could have resulted by dissolution of calcite (calcium carbonate) combined with cation-exchange and mixing with a small amount of brine. Through cation-exchange reactions between water and bedrock, which are equivalent to processes in a water softener, calcium ions released by calcite dissolution are exchanged for sodium ions on clay minerals. Thus, the assessment of groundwater quality in Lycoming County indicates groundwater is generally of good quality, but various parts of Lycoming County can have groundwater with low to moderate concentrations of methane and other constituents that appear in naturally present brine and produced waters from gas and oil wells at high concentrations."

Pennsylvania↗

USGS2001

Ground-water flow in the shallow aquifer system at the Naval Weapons Station Yorktown, Virginia

The Environmental Directorate of the Naval Weapons Station Yorktown, Virginia, is concerned about possible contamination of ground water at the Station. Ground water at the Station flows through a shallow system of layered aquifers and leaky confining units. The units of the shallow aquifer system are the Columbia aquifer, the Cornwallis Cave confining unit, the Cornwallis Cave aquifer, the Yorktown confining unit, and the Yorktown-Eastover aquifer. The Eastover-Calvert confining unit separates the shallow aquifer system from deeper confined aquifers beneath the Station. A three-dimensional, finite-difference, ground-water flow model was used to simulate steady-state ground-water flow of the shallow aquifer system in and around the Station. The model simulated ground-water flow from the peninsular drainage divide that runs across the Lackey Plain near the southern end of the Station north to King Creek and the York River and south to Skiffes Creek and the James River. The model was calibrated by minimizing the root mean square error between 4 7 measured and corresponding simulated water levels. The calibrated model was used to determine the ground-water budget and general directions of ground-water flow. A particle-tracking routine was used with the calibrated model to estimate groundwater flow paths, flow rates, and traveltimes from selected sites at the Station. Simulated ground-water flow velocities of the Station-area model were small beneath the interstream areas of the Lackey Plain and Croaker Flat, but increased outward toward the streams and rivers where the hydraulic gradients are larger. If contaminants from the land surface entered the water table at or near the interstream areas of the Station, where hydraulic gradients are smaller, they would migrate more slowly than if they entered closer to the streams or the shores of the rivers where gradients commonly are larger. The ground-water flow simulations indicate that some ground water leaks downward from the water table to the Yorktown confining unit and, where the confining unit is absent, to the Yorktown-Eastover aquifer. The velocities of advective-driven contaminants would decrease considerably when entering the Yorktown confining unit because the hydraulic conductivity of the confining unit is small compared to that of the aquifers. Any contaminants that moved with advective ground-water flow near the groundwater divide of the Lackey Plain would move relatively slowly because the hydraulic gradients are small there. The direction in which the contaminants would move, however, would be determined by precisely where the contaminants entered the water table. The model was not designed to accurately simulate ground-water flow paths through local karst features. Beneath Croaker Flat, ground water flows downward through the Columbia aquifer and the Yorktown confining unit into the Yorktown-Eastover aquifer. Analyses of the movement of simulated particles from two adjacent sites at Croaker Flat indicated that ground-water flow paths were similar at first but diverged and discharged to different tributaries of Indian Field Creek or to the York River. These simulations indicate that complex and possibly divergent flow paths and traveltimes are possible at the Station. Although the Station-area model is not detailed enough to simulate ground-water flow at the scales commonly used to track and remediate contaminants at specific sites, general concepts about possible contaminant migration at the Station can be inferred from the simulations.

Virginia↗

USGS2024

Land-use interactions, Oil-Field infrastructure, and natural processes control hydrocarbon and arsenic concentrations in groundwater, Poso Creek Oil Field, California, USA

Like many hydrocarbon production areas in the U.S., the Poso Creek Oil Field in California includes and is adjacent to other land uses (agricultural and other developed lands) that affect the hydrology and geochemistry of the aquifer overlying and adjacent to oil development. We hypothesize that the distributions of hydrocarbons and arsenic in groundwater in such areas will be controlled by complex interactions between mixed land uses, oil-field infrastructure, and natural processes. In 2020–2021, samples of groundwater and surface water were collected and analyzed for a large suite of inorganic and organic chemicals and isotope and gas tracers to test this hypothesis. Those data are supplemented with ancillary data on historical geochemistry, hydrology, geology, and oil-field infrastructure. Hydrocarbons in groundwater (e.g., methane through pentane gases and benzene) are associated with natural processes (e.g., fault offsets or transition in sediment depositional environment) and oil-field infrastructure (e.g., fluid-migration pathways associated with uncemented annulus in oil wells or unlined pits). Arsenic concentrations >10 μg per liter (μg/L; maximum concentration 12.9 μg/L) are associated with natural processes in old, high-pH groundwater, and more recent recharge of water from natural and/or engineered recharge processes. Along the southwest margin of the oil field, pumping for drinking-water and irrigation supplies in combination with engineered groundwater recharge produce a depression in groundwater elevations where groundwater with elevated sulfate concentrations from agricultural areas and groundwater with hydrocarbons from the oil field mix to produce a zone of sulfate reduction that removes hydrocarbons and arsenic from groundwater but produces elevated sulfide (S 2- ) concentrations (maximum concentration 29 mg per liter, mg/L). In this study, multiple approaches were required to resolve the overlapping effects of land uses, oil-field infrastructure, and natural processes on the distributions of hydrocarbons and arsenic in groundwater. The combined use of geographic, historical, physical, chemical, isotopic, and other information to constrain processes could be a useful approach for studies in other hydrocarbon-production areas. This is particularly important where land uses affect aquifer hydrology to an extent that causes mixing of groundwaters with different chemical compositions.

California↗

USGS2025

Using hydrogeologic context and water budgets to evaluate the potential for groundwater contributions to contaminants in Lake Superior

This study presents a synthesis of the hydrogeology in the U.S. Lake Superior watershed and the contribution of groundwater to the water budget of the U.S. Lake Superior basin. Much of the shoreline of Lake Superior in Minnesota and Michigan is composed of hydrogeologic units contributing very little direct groundwater discharge to the lake. Groundwater in watersheds adjacent to the lake typically flows in short, local flow systems characterized by thin glacial sediments with active groundwater flow in fractured bedrock within the top 60–90 m below land surface. The complex groundwater system in Wisconsin’s Bayfield Peninsula has the largest groundwater reservoir near the lake, characterized by thick sand and gravel glacial deposits and underlying sandstone aquifer. Although these thick sandy glacial deposits are not in direct contact with the lake at the shoreline, groundwater discharge may still be significant via subsurface exposures beyond the shoreline or flow through the underlying sandstone aquifer. Overall, most groundwater in the watershed is contributed as indirect base flow in streams around the lakeshore and comprises about 60 percent of the upland water budget. Direct groundwater flow to the shoreline contributes 2 to 9 percent of the inflow. Identifying possible contamination sources through direct sampling of groundwater would be an inefficient way to detect problems if sources are unknown, particularly for some chemicals of concern such as PFAS, pesticides, PCBs, chloride, and nutrients. Evaluating the chemical characteristics of contamination is also important to consider in evaluating how groundwater may contribute to pollution in Lake Superior.

Lake Superior↗

USGS2010

Combined use of groundwater dating, chemical, and isotopic analyses to resolve the history and fate of nitrate contamination in two agricultural watersheds, Atlantic coastal plain, Maryland

The history and fate of groundwater nitrate (NO 3 − ) contamination were compared in 2 small adjacent agricultural watersheds in the Atlantic coastal plain by combined use of chronologic (CCl 2 F 2 , 3 H), chemical (dissolved solids, gases), and isotopic (δ 15 N,δ 13 C, δ 34 S) analyses of recharging groundwaters, discharging groundwaters, and surface waters. The results demonstrate the interactive effects of changing agricultural practices, groundwater residence times, and local geologic features on the transfer of NO 3 − through local flow systems. Recharge dates of groundwaters taken in 1990–1992 from the surficial aquifer in the Chesterville Branch and Morgan Creek watersheds near Locust Grove, Maryland, ranged from pre-1940 to the late 1980’s. When corrected for localized denitrification by use of dissolved gas concentrations, the dated waters provide a 40-year record of the recharge rate of NO 3 − , which increased in both watersheds by a factor of 3–6, most rapidly in the 1970's. The increase in groundwater NO 3 − over time was approximately proportional to the documented increase in regional N fertilizer use, and could be accounted for by oxidation and leaching of about 20–35% of the fertilizer N. Groundwaters discharging upward beneath streams in both watersheds had measured recharge dates from pre-1940 to 1975, while chemical data for second-order reaches of the streams indicated average groundwater residence times in the order of 20+ years. At the time of the study, NO 3 − discharge rates were less than NO 3 − recharge rates for at least two reasons: (1) discharge of relatively old waters with low initial NO 3 − concentrations, and (2) local denitrification. In the Chesterville Branch watershed, groundwaters remained oxic throughout much of the surficial aquifer and discharged relatively unaltered to the stream, which had a relatively high NO 3 − concentration (9–10 mg/L as N). In the Morgan Creek watershed, groundwaters were largely reduced and denitrified before discharging to the stream, which had a relatively low NO 3 − concentration (2–3 mg/L as N). Chemical and isotopic data indicate that quantitative denitrification occurred within buried calcareous glauconitic marine sediments that are present at relatively shallow depths beneath the Morgan Creek watershed. NO 3 − removal by forests, wetlands, and shallow organic-rich soils in near-stream environments was largely avoided by groundwaters that followed relatively deep flow paths before converging and discharging rapidly upward to the streams.

Maryland↗

USGS1998

Evaluating the source and residence times of groundwater seepage to streams, New Jersey Coastal Plain

A conceptual model of the patterns and residence times of groundwater seepage to gaining streams indicates that groundwater seepage originates from sources that are both near and far from the stream. Consequently, the age of groundwater seepage across a stream-channel transect increases from its banks to its center and becomes progressively older with distance downstream. A groundwater flow model and particle-tracking analysis of the Cohansey River Basin in the New Jersey Coastal Plain supports this conceptual model and demonstrates that the orientation of the stream channels with respect to the regional groundwater flow direction, and the heterogeneities of the aquifer and stream-channel patterns, can shift source area locations and distributions of groundwater residence time from those expected. Groundwater samples collected from stream transects were analyzed for nitrogen, representative of widespread agricultural land use in the basin in recent decades, and for chlorofluorocarbons, used to estimate groundwater ages. The patterns of nitrogen concentration and the age of groundwater entering the stream channel corroborate model inferences. The conceptual model of groundwater seepage to streams presented herein is relevant to unconfined aquifer systems with gaining streams and demonstrates how nonpoint-source contaminants are transported to streams by groundwater. Results are useful for the design of programs needed to monitor stream-water quality.

New Jersey↗

USGS2023

Quality of groundwater used for domestic supply in the Modesto, Turlock, and Merced Subbasins of the San Joaquin Valley, California

Summary More than 2 million Californians rely on groundwater from privately owned domestic wells for drinking-water supply. This report summarizes a water-quality survey of domestic and small-system drinking-water supply wells in the Modesto, Turlock, and Merced subbasins of the San Joaquin Valley where more than 78,000 residents are estimated to use privately owned domestic wells. Results indicate that inorganic and organic constituents in groundwater were respectively present above regulatory (maximum contaminant level, MCL) benchmarks for public drinking-water quality in 37 percent and 9 percent of the aquifer area used for domestic drinking-water supplies (herein, “domestic groundwater resources”). The most prevalent inorganic constituents exceeding regulatory benchmarks were nitrate, uranium, and arsenic. The only organic constituents exceeding regulatory benchmarks were the fumigant constituents 1,2,3-trichloropropane (1,2,3-TCP) and 1,2-dibromo-3-chloropropane (DBCP), but the herbicides atrazine and simazine were detected at low concentrations below one-tenth of regulatory benchmarks in 30 percent of domestic groundwater resources. Total dissolved solids (TDS) and manganese exceeded aesthetic-based (secondary maximum contaminant level [SMCL]) benchmarks for drinking water in 3 percent and 13 percent of domestic groundwater resources, respectively. Per- and polyfluoroalkyl substances (PFAS) were detected in 23 percent of domestic groundwater resources, with 4 percent exceeding California state notification or response levels for specific compounds. Total coliform bacteria were detected in 20 percent of domestic groundwater resources. Elevated concentrations of nitrate, uranium, TDS, and pesticides (fumigant constituents and herbicides) are related to agricultural land use and were typically present at shallow depths up to 75 meters below land surface. Agriculturally derived constituents were detected in wells screened below the Corcoran Clay Member of the Tulare Formation (herein, “Corcoran Clay”) in the southeastern part of the study area, where the Corcoran Clay tends to be shallower and thinner than in areas to the northwest. Nitrate, uranium, and TDS were most prevalent in the northwest part of the study area proximal to the valley trough where soils are poorly drained and agricultural land uses are predominantly grain, alfalfa, and dairy farms. Pesticides tended to occur in groundwater below coarse-grained surficial deposits and within a northwest to southeast trending band along the eastern extent of the Corcoran Clay that typically demarcates the western extent of well-drained soils associated with perennial orchard crops. Elevated concentrations of arsenic tended to occur west of this band in reducing groundwater but also sometimes co-occurred with elevated nitrate in oxic groundwater, most likely because of geochemical conditions in agriculturally affected groundwater that can enhance the mobility of arsenic from aquifer sediments.

California↗

USGS2015

Potentiometric surface of the Catahoula aquifer in central Louisiana, 2013

The Catahoula aquifer is an important source of fresh groundwater in central Louisiana. In 2010, about 3.96 million gallons per day (Mgal/d) were withdrawn from the Catahoula aquifer in Louisiana. In 2012, the U.S. Geological Survey in cooperation with the Louisiana Department of Natural Resources began a study to document current water levels in selected aquifers in Louisiana. This report presents water-level data and a map that illustrates the potentiometric surface of the Catahoula aquifer in 2013. The Catahoula aquifer crops out in a narrow band across north-central Louisiana. This band is broken by alluvial deposits in the valleys of the Red, Little, and Ouachita Rivers that have incised into the aquifer. Saltwater ridges under the Red, Little, and Tensas River Valleys divide the freshwater extents of the Catahoula aquifer and limit the flow of freshwater between these areas. The Catahoula aquifer generally ranges in thickness from about 50 feet (ft) in the outcrop area to about 450 ft in southern Vernon Parish. Sand beds in the aquifer are generally discontinuous, lenticular, and interbedded with silts and clays. The potentiometric surface of the Catahoula aquifer was constructed by using the altitude of water levels measured at 29 wells during the period May through September 2013. The altitude of water levels ranged from 0.02 ft above the National Geodetic Vertical Datum of 1929 (NGVD 29) in well Co-51 to 238 ft above NGVD 29 in well Na-317. Groundwater movement in the Catahoula aquifer is generally to the southeast and towards discharge areas beneath the Sabine, Red, Little, and Tensas River Valleys.

Louisiana↗

USGS2009

Characterization of Interactions between Surface Water and Near-Stream Groundwater along Fish Creek, Teton County, Wyoming, by Using Heat as a Tracer

Fish Creek, a tributary of the Snake River, is about 25 river kilometers long and is located in Teton County in western Wyoming near the town of Wilson. Local residents began observing an increase in the growth of algae and aquatic plants in the stream during the last decade. Due to the known importance of groundwater to surface water in the area, the U.S. Geological Survey (USGS), in cooperation with the Teton Conservation District, conducted a study to characterize the interactions between surface water and near-stream groundwater along Fish Creek. The study has two main objectives: (1) develop an improved spatial and temporal understanding of water flow (fluxes) between surface water and groundwater, and (2) use a two-dimensional groundwater-flow and heat-transport model to interpret observed temperature and hydraulic-head distributions and to describe groundwater flow near Fish Creek. The study is intended to augment hydrologic information derived from previously published results of a seepage investigation on Fish Creek. Seepage measurements provide spatially averaged gains and losses over an entire reach for one point in time, whereas continuous temperature and water-level measurements provide continuous estimates of gain and loss at a specific location. Stage, water-level, and temperature data were collected from surface water and from piezometers completed in an alluvial aquifer at three cross sections on Fish Creek at Teton Village, Resor's Bridge, and Wilson from October 2004 to October 2006. The flow and energy (heat) transport model VS2DH was used to simulate flow through the streambed of Fish Creek at the Teton Village cross section from April 15 to October 14, 2006, (183 recharge periods) and at the Resor's Bridge and Wilson cross sections from June 6, 2005, to October 14, 2006 (496 recharge periods). A trial-and-error technique was used to determine the best match between simulated and measured data. These results were then used to calibrate the cross-sectional models and determine horizontal and vertical hydraulic conductivities. The fluxes of groundwater into the stream or fluxes of stream water into the alluvial aquifer were estimated by using the calibrated VS2DH model for each cross section. Results of the simulations indicated that surface water/groundwater interaction and hydraulic properties were different at the three cross sections. At the most upstream cross section, Teton Village, Fish Creek flowed intermittently and continually gained relatively large quantities of water from April through September. During other times of the year, the stream was dry near the cross section. Saturated hydraulic conductivity set at 1x10-4 m/s in both the horizontal and vertical directions resulted in the best match between simulated and measured temperatures. The Resor's Bridge cross section, about midway between the other two cross sections, was near the point where perennial flow begins. At this cross section, the stream gained water from groundwater during high flow in late spring and summer, was near equilibrium with groundwater during August and September, and lost water to groundwater during the remainder of the year. Horizontal hydraulic conductivity set at 5x10-5 m/s and vertical hydraulic conductivity set at 1x10-5 m/s resulted in the best match between simulated and measured temperatures. The Wilson cross section, the most downstream site, was at USGS streamflow-gaging station 13016450. This part of the stream is perennial and was almost always gaining a small volume of water from groundwater. Saturated hydraulic conductivity set at 1x10-4 m/s in the horizontal direction and at 5x10-6 m/s in the vertical direction resulted in the best match between simulated and measured temperatures. Quantitative values of the flux from groundwater into surface water were estimated by using VS2DH and ranged from 1.1 to 6.6 cubic meters per day (m3/d) at the Teton Village cross section, from -3.8 to 7.4 m3/d at t

Scientific Investigations Report↗

USGS2015

Hydrogeology, hydrologic effects of development, and simulation of groundwater flow in the Borrego Valley, San Diego County, California

Executive Summary The Borrego Valley is a small valley (110 square miles) in the northeastern part of San Diego County, California. Although the valley is about 60 miles northeast of city of San Diego, it is separated from the Pacific Ocean coast by the mountains to the west and is mostly within the boundaries of Anza-Borrego Desert State Park. From the time the basin was first settled, groundwater has been the only source of water to the valley. Groundwater is used for agricultural, recreational, and municipal purposes. Over time, groundwater withdrawal through pumping has exceeded the amount of water that has been replenished, causing groundwater-level declines of more than 100 feet in some parts of the basin. Continued pumping has resulted in an increase in pumping lifts, reduced well efficiency, dry wells, changes in water quality, and loss of natural groundwater discharge. As a result, the U.S. Geological Survey began a cooperative study of the Borrego Valley with the Borrego Water District (BWD) in 2009. The purpose of the study was to develop a greater understanding of the hydrogeology of the Borrego Valley Groundwater Basin (BVGB) and to provide tools to help evaluate the potential hydrologic effects of future development. The objectives of the study were to (1) improve the understanding of groundwater conditions and land subsidence, (2) incorporate this improved understanding into a model that would assist in the management of the groundwater resources in the Borrego Valley, and (3) use this model to test several management scenarios. This model provides the capability for the BWD and regional stakeholders to quantify the relative benefits of various options for increasing groundwater storage. The study focuses on the period 1945–2010, with scenarios 50 years into the future. This report documents and presents (1) an analysis of the conceptual model, (2) a description of the hydrologic features, (3) a compilation and analysis of water-quality data, (4) the measurement and analysis of land subsidence by using geophysical and remote sensing techniques, (5) the development and calibration of a two-dimensional borehole-groundwater-flow model to estimate aquifer hydraulic conductivities, (6) the development and calibration of a three-dimensional (3-D) integrated hydrologic flow model, (7) a water-availability analysis with respect to current climate variability and land use, and (8) potential future management scenarios. The integrated hydrologic model, referred to here as the “Borrego Valley Hydrologic Model” (BVHM), is a tool that can provide results with the accuracy needed for making water-management decisions, although potential future refinements and enhancements could further improve the level of spatial and temporal resolution and model accuracy. Because the model incorporates time-varying inflows and outflows, this tool can be used to evaluate the effects of temporal changes in recharge and pumping and to compare the relative effects of different water-management scenarios on the aquifer system. Overall, the development of the hydrogeologic and hydrologic models, data networks, and hydrologic analysis provides a basis for assessing surface and groundwater availability and potential water-resource management guidelines.

California↗

USGS2025

Multidecadal change in pesticide concentrations relative to human health benchmarks in the Nation’s groundwater

Groundwater-quality trend assessments identify aquifers that are responding to changes in pesticide use and the compounds that may pose a threat to water availability. The U.S. Geological Survey has been monitoring pesticide concentrations in groundwater for 25 principal aquifers across the conterminous United States since 1993. The groundwater well locations represent a range of soils, climate, and landforms. The wells are used to monitor groundwater underlying selected agricultural and urban settings and groundwater used for domestic supply. This study examined changes in relative concentrations, defined here as the percentage of wells with pesticide concentrations exceeding a human health benchmark (HHB). HHBs used in this report are legally enforceable drinking-water standards and nonenforceable drinking water levels. Relative pesticide concentration increases may lead to decreased water availability, as restrictions may be put in place for groundwater used as a drinking-water source. This study focused on concentration changes in 22 pesticides that were included in laboratory analysis from 1993 to 2023. The analysis and interpretation of these pesticide concentrations in groundwater have been separated into approximate decadal intervals (decade 1 (1993–2001), decade 2 (2002–12), and decade 3 (2013–22). For one pesticide, 1,2-dibromo-3-chloropropane (DBCP), concentration data were also collected in decade 4 (2023–onward). Atrazine, deethylatrazine, alachlor, prometon, and simazine were 5 pesticides detected at moderate concentrations (greater than 10 percent of the HHB but less than or equal to the HHB). The percentage of wells that had groundwater pesticide concentrations in the moderate concentration category decreased from 7 percent in decade 1 to 2 percent in decade 3. The agricultural networks had the highest percentages of wells with moderate concentrations, and these percentages decreased from 13 percent in decade 1 to 4 percent in decade 3. Moderate concentrations in the urban networks decreased between decades 1 and 2 from 4 percent to 0 percent. No moderate concentrations occurred in the urban networks in decade 3. The percentage of wells with moderate concentrations in the domestic supply networks (1 percent) was the lowest of all the network types and did not change across the three decades. Moderate atrazine or deethylatrazine concentrations occurred across all three decades in aggregated ecoregions representing similar soils, climate, and landforms in the Semiarid West, Midcontinent, and Northeastern United States. Moderate concentrations of prometon, alachlor, and simazine also occurred in the Midcontinent, Arid West, Northeast, South Atlantic Gulf, and Semiarid West regions, but the moderate concentrations did not persist across all three decades. DBCP was the only pesticide that exceeded its respective HHB, and the exceedances occurred across all four decades. In this report, the DBCP analysis was limited to one well network in the Central Valley, California. Agricultural use of DBCP was suspended in 1977. Forty-five years after being banned, DBCP concentrations were greater than the maximum contaminant level of 2 micrograms per liter (μg/L), but the number of exceedances decreased from 50 percent to 15 percent of the samples between 1993 and 2023. This assessment of decadal groundwater pesticide concentrations provides a characterization of changes in water availability because of pesticide contamination in areas where groundwater is used as a drinking-water source. The results highlight the importance of continued long-term monitoring and assessment of groundwater pesticides to identify locations and specific compounds that may pose a potential risk to human health.

continental United States↗

USGS2019

Guidelines and standard procedures for high-frequency groundwater-quality monitoring stations—Design, operation, and record computation

High-frequency water-quality monitoring stations measure and transmit data, often in near real-time, from a wide range of aquatic environments to assess the quality of the Nation’s water resources. Common instrumentation for high-frequency water-quality data collection uses a multi-parameter sonde, which typically has sensors that measure and record water temperature, specific conductance, pH, and dissolved oxygen. Nitrate, turbidity, and fluorescent dissolved organic matter can also be monitored at high frequency. High-frequency groundwater-quality monitoring stations provide high-resolution time-series data to improve understanding of the timing of water-quality changes in the subsurface, especially for aquifer systems with short groundwater-residence times. High-frequency time-series data are used to monitor surface-water to groundwater interaction, quantify contaminant transport rates, and study water-quality variability in relation to variability of precipitation and groundwater pumping rates. High-frequency monitoring for contaminants or their surrogates have the added benefit of providing an early warning to protect valuable or sensitive aquifer resources. High-frequency time-series data also reveal short-term trends in groundwater quality, which may not be identifiable from monthly or annual sampling programs which facilitate the interpretation of decadal conditions. Systematic application of water-quality sonde operational procedures and a standard record-computation process are part of the required quality assurance for producing and documenting complete and accurate high-frequency groundwater-quality monitoring records. To collect quality high-frequency groundwater times-series data, water-quality sondes and sensors require careful field operation, cleaning, and calibration, as well as specific procedures for data computation, evaluation, review, and publication of final records. This report provides guidelines for the use of water-quality sondes and sensors for high-frequency groundwater-quality monitoring and updates the guidance pertaining to standardized records computation procedures for a wide range of groundwater environments. This report builds on previous continuous surface-water-quality monitoring guidance documentation for water temperature, specific conductance, pH, dissolved oxygen, and nitrate. The specific groundwater-quality monitoring guidelines presented in this report address station selection, design, installation, and operations; sonde and sensor inspections and cleaning and calibration methods; troubleshooting procedures; data evaluations, data corrections, and record computations; and record review, approval, and auditing procedures for the groundwater environment.

Techniques and Methods↗

USGS2013

Variable contributions of mercury from groundwater to a first-order urban coastal plain stream in New Jersey, USA

Filtered total mercury (FTHg) concentrations in a rapidly urbanizing area ranged from 50 to 250 ng/L in surface waters of the Squankum Branch, a tributary to a major river (Great Egg Harbor River (GEHR)) traversing both urban and forested/wetland areas in the Coastal Plain of New Jersey. An unsewered residential area with Hg-contaminated well water (one of many in the region) is adjacent to the stream’s left bank. Although the region’s groundwater contains total Hg (THg) at background levels of <10 ng/L, water from about 700 domestic wells in urbanized areas completed in the acidic, quartzose unconfined aquifer typically at depths 20 to 30 m below land surface has been found to exceed 2,000 ng/L (the USEPA maximum contaminant level). Within urbanized areas, THg concentrations in shallow groundwater (<20 m below land surface at or near the water table) and the potential for Hg transport were not well known, representing a considerable knowledge gap. Sampling of streamwater in, and groundwater discharge to, the Squankum Branch watershed revealed that concentrations of THg generally were in the range of 1 to 10 ng/L, but narrow plumes (“plumelets”) of shallow groundwater discharging to the stream from the opposing banks contained FTHg at a concentration > 5,000 ng/L (left bank) and nearly 2,000 ng/L (right bank). The Hg content of bankside soils and sediments was high (up to 12 mg/kg) and mostly acid leachable where groundwater with high Hg concentrations discharged, indicating contributions of Hg by both runoff and shallow groundwater. Elevated concentrations of nutrients and chloride in some groundwater plumelets likely indicated inputs from septic-system effluent and (or) fertilizer applications. The Hg probably derives mainly from mercurial pesticide applications to the former agricultural land being urbanized. The study results show that soil disturbance and introduction of anthropogenic substances can mobilize Hg from soils to shallow groundwater and the Hg contamination travels in narrow plumelets to discharge points such as stream tributaries. In the entire GEHR watershed, THg concentrations in groundwater discharging to streams in urban areas tended to be higher than concentrations in water discharging to streams of forested areas, consistent with the results from this small watershed. Other areas with similar quartzose coastal aquifers, land-use history, and hydrogeology may be similarly vulnerable to Hg contamination of shallow groundwater and associated surface water.

New Jersey↗