USGS Science⌕ Search

Geology topics

Faults & earthquakes

Explore USGS earthquake and fault publications. Search fault names, locations and seismic hazards; follow the original report for maps, methods and publication context.

Follow this topic with RSS
At least 415 records · Page 23Linked to original sources
USGS2010

Prehistoric earthquakes on the Caribbean-South American plate boundary, Central Range Fault, Trinidad

Recent geodetic studies suggest that the Central Range fault is the principal plate-boundary structure accommodating strike-slip motion between the Caribbean and South American plates. Our study shows that the fault forms a topographically prominent lineament in central Trinidad. Results from a paleoseismic investigation at a site where Holocene sediments have been deposited across the Central Range fault indicate that it ruptured the ground surface most recently between 2710 and 550 yr B.P. If the geodetic slip rate of 9–15 mm/yr is representative of Holocene slip rates, our paleoseismic data suggest that at least 4.9 m of potential slip may have accumulated on the fault and could be released during a future large earthquake (M > 7).

Geology↗
USGS2004

Ground motion in Anchorage, Alaska, from the 2002 Denali fault earthquake: Site response and displacement pulses

Data from the 2002 Denali fault earthquake recorded at 26 sites in and near Anchorage, Alaska, show a number of systematic features important in studies of site response and in constructing long-period spectra for use in earthquake engineering. The data demonstrate that National Earthquake Hazards Reduction Program (NEHRP) site classes are a useful way of grouping stations according to site amplification. In general, the sites underlain by lower shear-wave velocities have higher amplification. The amplification on NEHRP class D sites exceeds a factor of 2 relative to an average of motions on class C sites. The amplifications are period dependent. They are in rough agreement with those from previous studies, but the new data show that the amplifications extend to at least 10 sec, periods longer than considered in previous studies. At periods longer than about 14 sec, all sites have motion of similar amplitude, and the ground displacements are similar in shape, polarization, and amplitude for all stations. The displacement ground motion is dominated by a series of four pulses, which are associated with the three subevents identified in inversion studies (the first pulse is composed of P waves from the first subevent). Most of the high-frequency ground motion is associated with the S waves from subevent 1. The pulses from subevents 1 and 2, with moment releases corresponding to M 7.1 and 7.0, are similar to the pulse of displacement radiated by the M 7.1 Hector Mine earthquake. The signature from the largest subevent (M 7.6) is more subdued than those from the first two subevents. The two largest pulses produce response spectra with peaks at a period of about 15 sec. The spectral shape at long periods is in good agreement with the recent 2003 NEHRP code spectra but is in poor agreement with the shape obtained from Eurocode 8.

Alaska↗
USGS2010

A magnitude 7.1 earthquake in the Tacoma Fault Zone— A plausible scenario for the southern Puget Sound region, Washington

The U.S. Geological Survey and cooperating scientists have recently assessed the effects of a magnitude 7.1 earthquake on the Tacoma Fault Zone in Pierce County, Washington. A quake of comparable magnitude struck the southern Puget Sound region about 1,100 years ago, and similar earthquakes are almost certain to occur in the future. The region is now home to hundreds of thousands of people, who would be at risk from the shaking, liquefaction, landsliding, and tsunamis caused by such an earthquake. The modeled effects of this scenario earthquake will help emergency planners and residents of the region prepare for future quakes.

Washington↗
USGS2025

Relationship of basin structure and bedrock lithology to faulting in the 2019 Ridgecrest earthquake region, California, from gravity and aeromagnetic data

We investigate patterns of cumulative offsets on the faults that ruptured in 2019 and along the Garlock Fault in the Ridgecrest region, California using recently published gravity and aeromagnetic data. We also examine the relationship of basin structure and bedrock structure to the 2019 M7.1 Ridgecrest earthquake ruptures (Fig. 1A), which were primarily along a dextral northwest-striking fault system, and along a sinistral northeast-striking fault, which ruptured hours earlier with a M6.4 event.

California↗
USGS1978

How often will earthquakes recur on the San Andreas Fault?

The relationship between magnitude and abundance of earthquakes, called a recurrence curve, has been derived for many regions of the world from seismographic records. AS an example, Clarence Allen and his associates at the California Institute of Technology have obtained recurrence rates for the southern California region by incorporating data from over 10,000 earthquakes recorded between 1934 and 1963. My own approach to estimating average recurrence intervals has been somewhat different. I have used the history of slip rates along the San Andreas fault that are preserved in the geologic record. The main advantage in this method is that is samples a very long period of time, which gives a better estimate of the recurrence of small earthquakes.

California↗
USGS2015

Delayed dynamic triggering of deep tremor along the Parkfield-Cholame section of the San Andreas Fault following the 2014 M6.0 South Napa earthquake

Large, distant earthquakes are known to trigger deep tectonic tremor along the San Andreas Fault and in subduction zones. However, there are relatively few observations of triggering from regional distance earthquakes. Here we show that a small tremor episode about 12–18 km NW of Parkfield was triggered during and immediately following the passage of surface waves from the 2014 M w 6.0 South Napa main shock. More notably, a major tremor episode followed, beginning about 12 h later, and centered SE of Parkfield near Cholame. This major episode is one of the largest seen over the past several years, containing intense activity for ~3 days and taking more than 3 weeks to return to background levels. This episode showed systematic along-strike migration at ~5 km/d, suggesting that it was driven by a slow-slip event. Our results suggest that moderate-size earthquakes are capable of triggering major tremor and deep slow slip at regional distances.

California↗
USGS1994

Earthquake mechanism and predictability shown by a laboratory fault

Slip events generated in a laboratory fault model consisting of a circulinear chain of eight spring-connected blocks of approximately equal weight elastically driven to slide on a frictional surface are studied. It is found that most of the input strain energy is released by a relatively few large events, which are approximately time predictable. A large event tends to roughen stress distribution along the fault, whereas the subsequent smaller events tend to smooth the stress distribution and prepare a condition of simultaneous criticality for the occurrence of the next large event. The frequency-size distribution resembles the Gutenberg-Richter relation for earthquakes, except for a falloff for the largest events due to the finite energy-storage capacity of the fault system. Slip distributions, in different events are commonly dissimilar. Stress drop, slip velocity, and rupture velocity all tend to increase with event size. Rupture-initiation locations are usually not close to the maximum-slip locations. ?? 1994 Birkha??user Verlag.

Pure and Applied Geophysics PAGEOPH↗
USGS2001

Long-term monitoring of creep rate along the Hayward fault and evidence for a lasting creep response to 1989 Loma Prieta earthquake

We present results from over 30 yr of precise surveys of creep along the Hayward fault. Along most of the fault, spatial variability in long-term creep rates is well determined by these data and can help constrain 3D-models of the depth of the creeping zone. However, creep at the south end of the fault stopped completely for more than 6 years after the M7 1989 Loma Prieta Earthquake (LPEQ), perhaps delayed by stress drop imposed by this event. With a decade of detailed data before LPEQ and a decade after it, we report that creep response to that event does indeed indicate the expected deficit in creep.

Geophysical Research Letters↗
USGS2004

Fine-scale structure of the San Andreas fault zone and location of the SAFOD target earthquakes

We present results from the tomographic analysis of seismic data from the Parkfield area using three different inversion codes. The models provide a consistent view of the complex velocity structure in the vicinity of the San Andreas, including a sharp velocity contrast across the fault. We use the inversion results to assess our confidence in the absolute location accuracy of a potential target earthquake. We derive two types of accuracy estimates, one based on a consideration of the location differences from the three inversion methods, and the other based on the absolute location accuracy of “virtual earthquakes.” Location differences are on the order of 100–200 m horizontally and up to 500 m vertically. Bounds on the absolute location errors based on the “virtual earthquake” relocations are ∼50 m horizontally and vertically. The average of our locations places the target event epicenter within about 100 m of the SAF surface trace.

California↗
USGS2003

Using 1-Hz GPS data to measure deformations caused by the denali fault earthquake

The 3 November 2002 moment magnitude 7.9 Denali fault earthquake generated large, permanent surface displacements in Alaska and large-amplitude surface waves throughout western North America. We find good agreement between strong ground-motion records integrated to displacement and 1-hertz Global Positioning System (GPS) position estimates collected ??? 140 kilometers from the earthquake epicenter. One-hertz GPS receivers also detected seismic surface waves 750 to 3800 kilometers from the epicenter, whereas these waves saturated many of the seismic instruments in the same region. High-frequency GPS increases the dynamic range and frequency bandwidth of ground-motion observations, providing another tool for studying earthquake processes.

Science↗
USGS1976

Oroville earthquakes: Normal faulting in the Sierra Nevada foothills

Aftershocks of the Oroville, California, earthquake of 1 August 1975 define a 16- by 12-kilometer fault plane striking north-south and dipping 60 degrees to the west to a depth of 10 kilometers. Focal mechanisms from P-wave first motions indicate normal faulting with the western, Great Valley side downdropped relative to the Sierra Nevada block. The northward projection of the fault plane passes beneath Oroville Dam and crops out under the reservoir.

California↗
USGS2013

A record of large earthquakes during the past two millennia on the southern Green Valley Fault, California

We document evidence for surface-rupturing earthquakes (events) at two trench sites on the southern Green Valley fault, California (SGVF). The 75-80-km long dextral SGVF creeps ~1-4 mm/yr. We identify stratigraphic horizons disrupted by upward-flowering shears and in-filled fissures unlikely to have formed from creep alone. The Mason Rd site exhibits four events from ~1013 CE to the Present. The Lopes Ranch site (LR, 12 km to the south) exhibits three events from 18 BCE to Present including the most recent event (MRE), 1610 ±52 yr CE (1σ) and a two-event interval (18 BCE-238 CE) isolated by a millennium of low deposition. Using Oxcal to model the timing of the 4-event earthquake sequence from radiocarbon data and the LR MRE yields a mean recurrence interval (RI or μ) of 199 ±82 yr (1σ) and ±35 yr (standard error of the mean), the first based on geologic data. The time since the most recent earthquake (open window since MRE) is 402 yr ±52 yr, well past μ~200 yr. The shape of the probability density function (pdf) of the average RI from Oxcal resembles a Brownian Passage Time (BPT) pdf (i.e., rather than normal) that permits rarer longer ruptures potentially involving the Berryessa and Hunting Creek sections of the northernmost GVF. The model coefficient of variation (cv, σ/μ) is 0.41, but a larger value (cv ~0.6) fits better when using BPT. A BPT pdf with μ of 250 yr and cv of 0.6 yields 30-yr rupture probabilities of 20-25% versus a Poisson probability of 11-17%.

California↗
USGS2000

Preliminary simulation of a M6.5 earthquake on the Seattle Fault using 3D finite-difference modeling

A three-dimensional finite-difference simulation of a moderate-sized (M 6.5) thrust-faulting earthquake on the Seattle fault demonstrates the effects of the Seattle Basin on strong ground motion in the Puget lowland. The model area includes the cities of Seattle, Bremerton and Bellevue. We use a recently developed detailed 3D-velocity model of the Seattle Basin in these simulations. The model extended to 20-km depth and assumed rupture on a finite fault with random slip distribution. Preliminary results from simulations of frequencies 0.5 Hz and lower suggest amplification can occur at the surface of the Seattle Basin by the trapping of energy in the Quaternary sediments. Surface waves generated within the basin appear to contribute to amplification throughout the modeled region. Several factors apparently contribute to large ground motions in downtown Seattle: (1) radiation pattern and directivity from the rupture; (2) amplification and energy trapping within the Quaternary sediments; and (3) basin geometry and variation in depth of both Quaternary and Tertiary sediments

Open-File Report↗
USGS1994

Fault-zone waves observed at the southern Joshua Tree earthquake rupture zone

Waveform and spectral characteristics of several aftershocks of the M 6.1 22 April 1992 Joshua Tree earthquake recorded at stations just north of the Indio Hills in the Coachella Valley can be interpreted in terms of waves propagating within narrow, low-velocity, high-attenuation, vertical zones. Evidence for our interpretation consists of: (1) emergent P arrivals prior to and opposite in polarity to the impulsive direct phase; these arrivals can be modeled as headwaves indicative of a transfault velocity contrast; (2) spectral peaks in the S wave train that can be interpreted as internally reflected, low-velocity fault-zone wave energy; and (3) spatial selectivity of event-station pairs at which these data are observed, suggesting a long, narrow geologic structure. The observed waveforms are modeled using the analytical solution of Ben-Zion and Aki (1990) for a plane-parallel layered fault-zone structure. Synthetic waveform fits to the observed data indicate the presence of NS-trending vertical fault-zone layers characterized by a thickness of 50 to 100 m, a velocity decrease of 10 to 15% relative to the surrounding rock, and a P -wave quality factor in the range 25 to 50.

Bulletin of the Seismological Society of America↗
USGS1993

Geologic investigations of Australian earthquakes: Paleoseismicity and the recurrence of surface faulting in the stable regions of continents

Earthquakes that occur in the stable regions of continents are very rare compared to those that occur along plate margins, such as the San Andreas fault system of western California. Worldwide, only 11 historic earthquakes in stable continental regions are known to have produced surface ruptures. Five of these have occurred in Australia since 1968 (see map, next page).

Earthquakes & Volcanoes (USGS)↗