Geology topics

Walter Roest

Publications and source records attributed to Walter Roest.

6 recordsLinked to original sources

USGS2011

Unique U.S. magnetic anomaly data base forthcoming

The year 2004 will offer an exciting and cost-effective opportunity to acquire a new U.S. magnetic anomaly data base. High Altitude Mapping Missions Inc. (HAMM) is currently planning an airborne mission to collect high-resolution Interferometric Synthetic Aperture Radar (IFSAR) imagery at an altitude of about 15 km, with a flight-line spacing of about 14 km over the conterminous United States and Alaska. Total and vector magnetic field data will also be collected with a “piggy-back” magnetometer system as a secondary mission objective. Because HAMM would fund the main flight costs of the mission, the geomagnetic community would acquire invaluable magnetic data at a nominal cost. These unique data will provide new insights on fundamental tectonic and thermal processes and give a new view of the structural and lithologic framework of continental areas and offshore regions.

Eos Science News↗

USGS2002

Magnetic anomaly map of North America

This digital Magnetic Anomaly database and map for the North American continent is the result of a joint effort by the Geological Survey of Canada (GSC), U.S. Geological Survey (USGS), and Consejo de Recursos Minerales of Mexico (CRM). The database and map represent a substantial upgrade from the previous compilation of Magnetic Anomaly data for North America, now over a decade old (Committee for the Magnetic Anomaly Map of North America, 1987). This integrated, readily accessible, modern digital database of magnetic anomaly data will be a powerful tool for further evaluation of the structure, geologic processes, and tectonic evolution of the continent and may also be used to help resolve societal and scientific issues that span national boundaries. The North American magnetic anomaly map derived from the digital database provides a comprehensive magnetic view of continental-scale trends not available in individual data sets, helps link widely separated areas of outcrop, and unifies disparate geologic studies. This booklet outlines the data processing and compilation procedures used to produce the magnetic anomaly database and map that accompany this booklet.

Special Map↗

USGS2002

Rationale and operational plan for a U.S. high-altitude magnetic survey

On August 8, 2002, twenty-one scientists from the federal, private and academic sectors met at a workshop in Denver, Co., to discuss the feasibility of collecting magnetic anomaly data on a Canberra aircraft (Figure 1). The need for this 1-day workshop arose because of an exciting and cost-effective opportunity to collect invaluable magnetic anomaly data during a Canberra mission over the U.S. in 2003 and 2004. High Altitude Mapping Missions (HAMM) is currently planning a mission to collect Interferometric Synthetic Aperture Radar (IFSAR) imagery at an altitude of about 15 km and with a flight-line spacing of about 18 km over the conterminous U.S. and Alaska. The additional collection of total and vector magnetic field data would represent a secondary mission objective (i.e., a "piggy-back" magnetometer system). Because HAMM would fund the main flight costs of the mission, the geomagnetic community would obtain invaluable magnetic data at a nominal cost. These unique data would provide new insights on fundamental tectonic and thermal processes and give a new view of the structural and lithologic framework of the crust and possibly the upper mantle. This document highlights: (1) the reasons to conduct this national survey and (2) a preliminary operational plan to collect high-altitude magnetic data of a desired quality and for the expected resources. Although some operational plan issues remain to be resolved, the important conclusions of the workshop are that the Canberra is a very suitable platform to measure the magnetic field and that the planned mission will result in quality high-altitude magnetic data to greatly expand the utility of our national magnetic database.

Open-File Report↗

USGS2002

Digital data grids for the magnetic anomaly map of North America

The digital magnetic anomaly database and map for the North American continent is the result of a joint effort by the Geological Survey of Canada (GSC), U. S. Geological Survey (USGS), and Consejo de Recursos Minerales of Mexico (CRM). This integrated, readily accessible, modern digital database of magnetic anomaly data is a powerful tool for further evaluation of the structure, geologic processes, and tectonic evolution of the continent and may also be used to help resolve societal and scientific issues that span national boundaries. The North American magnetic anomaly map derived from the digital database provides a comprehensive magnetic view of continental-scale trends not available in individual data sets, helps link widely separated areas of outcrop, and unifies disparate geologic studies. This open-file report presents three unique, gridded data sets used to make the magnetic anomaly map of North America. Subsets of these three grids that span only the United States were also created, giving a total of six grids. Details on the data processing and compilation procedures used to produce the grids are described in the booklet that accompanies the North American magnetic anomaly map. All three grids have 1-km spacing and are projected to the DNAG projection (spherical transverse mercator, central meridian of 100 o W, base latitude of 0o, scale factor of 0.926 and Earth radius of 6,371,204 m.) More details are given in the metadata files that accompany the gridded data files. These grids are presented in Geosoft binary grid format, with two files describing each of the six grids (suffixes .grd and .gi). This format can be easily converted to numerous other formats using the free conversion software offered by this company at http://www.geosoft.com/. The first grids (NAmag_origmrg.grd and USmag_origmrg.grd) show the magnetic field at 305 m. above terrain. For the second grids (NAmag_hp500.grd and USmag_hp500.grd) we removed long-wavelength anomalies (500 km and greater) from the first grid. This grid was used for the published map. Although the North American merged grid represents a significant upgrade to older compilations, the existing patchwork of surveys is inherently unable to accurately represent anomalies with long (greater than roughly 150 km) wavelengths, particularly in the US and Canada (U.S. Magnetic-Anomaly Data Set Task Group, 1994). The lack of information about long wavelength anomalies is primarily related to datum shifts between merged surveys, caused by data acquisition at widely different times and by differences in merging procedures. Therefore, we removed anomalies with wavelengths greater than 500 km from the merged grid to reduce the effects caused by the spurious long wavelengths but still maintain the continuity of anomalies. The correction was accomplished by transforming the merged grid to the frequency domain, filtering the transformed data with a long-wavelength cutoff at 500 km, and subtracting the long-wavelength data grid from the merged grid. In addition to the 500-km high pass filter, an equivalent source method, based on long-wavelength characterization using satellite data (CHAMP satellite anomalies, Maus and others, 2002), was also used to correct for spurious shifts in the original magnetic anomaly grid (Ravat and others, 2002). These results are presented in the third grids (NAmag_CM.grd and USmag_CM.grd), in which the wavelengths longer than 500 km have been replaced by downward-continued satellite data. The steps used to create the third long-wavelength-corrected grid are: 0. The North American 1-km merged grid was decimated to 5 km. 1. This 5-km grid was converted to a 0.05 degree grid and was low-pass filtered using a Gaussian filter with a 500-km cutoff, then decimated to 1 degree. 2. A joint inversion of this 1-degree low-pass aeromagnetic grid and satellite data, with the aeromagnetic data weighted very low, was used to produce a stabilized downward continuation of the satellite data. 3. The inverted data were interpolated to 0.05 degrees and again low-pass filtered using the same Gaussian 500-km filter to remove short-wavelength artifacts. 4. The low-pass grid from step 1 was subtracted from the original 0.05-degree aeromagnetic grid to create a 500-km high-pass aeromagnetic grid. This grid was added to the low-pass inverted grid from step 3 to get a corrected 0.05-degree aeromagnetic grid. 5. The corrected 0.05-degree aeromagnetic grid was projected to the DNAG projection and regridded to 5 km. This was subtracted from the decimated 5-km aeromagnetic grid to generate a 5-km correction grid. A matched filter was used to remove short-wavelength artifacts resulting from the projection and regridding process. 6. The resulting 5-km correction grid was regridded to the original 1-km grid and subtracted from the original 1-km aeromagnetic grid to generate the final 1-km corrected aeromagnetic grid. The six grids described in this report are available for download. Two metadata files, one for the North American grids and one for the United States grids, are also included with the gridded data.

Open-File Report↗

USGS2002

Rationale and operational plan to upgrade the U.S. gravity database

A concerted effort is underway to prepare a substantially upgraded digital gravity anomaly database for the United States and to make this data set and associated usage tools available on the internet. This joint effort, spearheaded by the geophysics groups at the National Imagery and Mapping Agency (NIMA), University of Texas at El Paso (UTEP), U.S. Geological Survey (USGS), and National Oceanic and Atmospheric Administration (NOAA), is an outgrowth of the new geoscientific community initiative called Geoinformatics (www.geoinformaticsnetwork.org). This dominantly geospatial initiative reflects the realization by Earth scientists that existing information systems and techniques are inadequate to address the many complex scientific and societal issues. Currently, inadequate standardization and chaotic distribution of geoscience data, inadequate accompanying documentation, and the lack of easy-to-use access tools and computer codes for analysis are major obstacles for scientists, government agencies, and educators. An example of the type of activities envisioned, within the context of Geoinformatics, is the construction, maintenance, and growth of a public domain gravity database and development of the software tools needed to access, implement, and expand it. This product is far more than a high quality database; it is a complete data system for a specific type of geophysical measurement that includes, for example, tools to manipulate the data and tutorials to understand and properly utilize the data. On August 9, 2002, twenty-one scientists from the federal, private and academic sectors met at a workshop to discuss the rationale for upgrading both the United States and North American gravity databases (including offshore regions) and, more importantly, to begin developing an operational plan to effectively create a new gravity data system. We encourage anyone interested in contributing data or participating in this effort to contact G.R. Keller or T.G. Hildenbrand. This workshop was the first step in building a web-based data system for sharing quality gravity data and methodology, and it builds on existing collaborative efforts. This compilation effort will result in significant additions to and major refinement of the U.S. database that is currently released publicly by NOAA’s National Geophysical Data Center and will also include an additional objective to substantially upgrade the North American database, released over 15 years ago (Committee for the Gravity Anomaly Map of North America, 1987).

Open-File Report↗

USGS1996

Rationale and preliminary operational plan for a high-altitude magnetic survey over the United States

A proposed high-altitude survey of the U.S. with an ER-2 to collect radar data offers an exciting and cost-effective opportunity to collect magnetic anomaly data. At this workshop, a group of magnetic specialists addressed this opportunity by discussing the need for high-altitude magnetic data and by formulating a preliminary operational plan to acquire such data. The high-altitude aeromagnetic survey would provide critical data needed to expand our knowledge of the geomagnetic field, with applications to a variety of earth science issues including geology, tectonics, core-processes, and rock-magnetism. Test flights with a cesium magnetometer indicate that the ER-2 has the potential to measure the magnetic field at an accuracy of 2 nT or better along flight lines. If the national ER-2 survey is carried out, the successful collection of high-altitude magnetic data hinges on establishing a consortium of federal and state agencies, private industry, and academic institutions to provide the identified resources.

Open-File Report↗