Geology topics

W.L. Watney

Publications and source records attributed to W.L. Watney.

10 recordsLinked to original sources

USGS2008

Flow unit modeling and fine-scale predicted permeability validation in Atokan sandstones: Norcan East Kansas

Characterizing the reservoir interval into flow units is an effective way to subdivide the net-pay zone into layers for reservoir simulation. Commonly used flow unit identification techniques require a reliable estimate of permeability in the net pay on a foot-by-foot basis. Most of the wells do not have cores, and the literature is replete with different kinds of correlations, transforms, and prediction methods for profiling permeability in pay. However, for robust flow unit determination, predicted permeability at noncored wells requires validation and, if necessary, refinement. This study outlines the use o f a spreadsheet-based permeability validation technique to characterize flow units in wells from the Norcan East field, Clark County, Kansas, that produce from Atokan aged fine- to very fine-grained quartzarenite sandstones interpreted to have been deposited in brackish-water, tidally dominated restricted tidal-flat, tidal-channel, tidal-bar, and estuary bay environments within a small incised-valley-fill system. The methodology outlined enables the identification of fieldwide free-water level and validates and refines predicted permeability at 0.5-ft (0.15-m) intervals by iteratively reconciling differences in water saturation calculated from wire-line log and a capillary-pressure formulation that models fine- to very fine-grained sandstone with diagenetic clay and silt or shale laminae. The effectiveness of this methodology was confirmed by successfully matching primary and secondary production histories using a flow unit-based reservoir model of the Norcan East field without permeability modifications. The methodologies discussed should prove useful for robust flow unit characterization of different kinds of reservoirs. Copyright ?? 2008. The American Association of Petroleum Geologists. All rights reserved.

American Association of Petroleum Geologists Bulle↗

USGS2008

Clarification and changes in Permian stratigraphic nomenclature in Kansas

This paper outlines Permian nomenclature changes to Zeller (1968) that have been adopted by the Kansas Geological Survey. The Permian System/ Period, Cisuralian Series/Epoch, and Asselian Stage/Age are established at the base of the Bennett Shale Member of the Red Eagle Limestone. Series/epoch names Wolfcampian, Leonardian, and Guadalupian are retained and usage of Gearyan, Cimarronian, and Custerian is abandoned. The repositioned Carboniferous-Permian boundary divides the Council Grove Group into Carboniferous (Upper Pennsylvanian Series/Epoch; Virgilian Stage/Age) and Permian (Wolfcampian Series Epoch) segments.

Current Research in Earth Sciences↗

USGS2007

Dominant factors in controlling marine gas pools in South China

In marine strata from Sinian to Middle Triassic in South China, there develop four sets of regional and six sets of local source rocks, and ten sets of reservoir rocks. The occurrence of four main formation periods in association with five main reconstruction periods, results in a secondary origin for the most marine gas pools in South China. To improve the understanding of marine gas pools in South China with severely deformed geological background, the dominant control factors are discussed in this paper. The fluid sources, including the gas cracked from crude oil, the gas dissolved in water, the gas of inorganic origin, hydrocarbons generated during the second phase, and the mixed pool fluid source, were the most significant control factors of the types and the development stage of pools. The period of the pool formation and the reconstruction controlled the pool evolution and the distribution on a regional scale. Owing to the multiple periods of the pool formation and the reconstruction, the distribution of marine gas pools was complex both in space and in time, and the gas in the pools is heterogeneous. Pool elements, such as preservation conditions, traps and migration paths, and reservoir rocks and facies, also served as important control factors to marine gas pools in South China. Especially, the preservation conditions played a key role in maintaining marine oil and gas accumulations on a regional or local scale. According to several dominant control factors of a pool, the pool-controlling model can be constructed. As an example, the pool-controlling model of Sinian gas pool in Weiyuan gas field in Sichuan basin was summed up. ?? Higher Education Press and Springer-Verlag 2007.

Frontiers of Earth Science in China↗

USGS2005

Use of XML and Java for collaborative petroleum reservoir modeling on the Internet

The GEMINI (Geo-Engineering Modeling through INternet Informatics) is a public-domain, web-based freeware that is made up of an integrated suite of 14 Java-based software tools to accomplish on-line, real-time geologic and engineering reservoir modeling. GEMINI facilitates distant collaborations for small company and academic clients, negotiating analyses of both single and multiple wells. The system operates on a single server and an enterprise database. External data sets must be uploaded into this database. Feedback from GEMINI users provided the impetus to develop Stand Alone Web Start Applications of GEMINI modules that reside in and operate from the user's PC. In this version, the GEMINI modules run as applets, which may reside in local user PCs, on the server, or Java Web Start. In this enhanced version, XML-based data handling procedures are used to access data from remote and local databases and save results for later access and analyses. The XML data handling process also integrates different stand-alone GEMINI modules enabling the user(s) to access multiple databases. It provides flexibility to the user to customize analytical approach, database location, and level of collaboration. An example integrated field-study using GEMINI modules and Stand Alone Web Start Applications is provided to demonstrate the versatile applicability of this freeware for cost-effective reservoir modeling. ?? 2005 Elsevier Ltd. All rights reserved.

Computers & Geosciences↗

USGS2000

High-resolution seismic reflection to delineate shallow gas in Eastern Kansas

Unique amplitude characteristics of shallow gas sands within Pennsylvanian clastic-carbonate dominated sequences are discernible on high-resolution seismic reflection data in eastern Kansas. Upward grading sequences of sand into shale represent a potential gas reservoir with a low-impedence acoustic contrast at the base of the encasing layer. The gas sand and encasing shale, which define the gas reservoir studied here, are part of an erosional incised valley where about 30 m of carbonates and shale have been replaced by sandstone and shale confined to the incised valley. These consolidated geologic settings would normally possess high impedence gas sand reservoirs as defined by abrupt contacts between the gas sand and encasing shale. Based orr core and borehole logs, the gas sand studied here grades from sand into shale in a fashion analogous to that observed in classic low-impedance environments. Amplitude and phase characteristics of high-resolution seismic data across this approximately 400-m wide gas sand are indicative of a low-impedance reservoir. Shot gathers possess classic amplitude with offsett-dependent characteristics which are manifeted on the stacked section as "bright spots." Dominant Frequencies of around 120 Hz allow detection of several reflectors within the 30+ meters of sand/shale that make up this localized gas-rich incised valley fill. The gradational nature of the trapping mechanism observed in this gas reservoir would make detection with conventional seismic reflection methods unlikely.

The Compass: Earth Science Journal of Sigma Gamma ↗

USGS1998

Petrofacies Analysis - A Petrophysical Tool for Geologic/Engineering Reservoir Characterization

Petrofacies analysis is defined as the characterization and classification of pore types and fluid saturations as revealed by petrophysical measurements of a reservoir. The word "petrofacies" makes an explicit link between petroleum engineers' concerns with pore characteristics as arbiters of production performance and the facies paradigm of geologists as a methodology for genetic understanding and prediction. In petrofacies analysis, the porosity and resistivity axes of the classical Pickett plot are used to map water saturation, bulk volume water, and estimated permeability, as well as capillary pressure information where it is available. When data points are connected in order of depth within a reservoir, the characteristic patterns reflect reservoir rock character and its interplay with the hydrocarbon column. A third variable can be presented at each point on the crossplot by assigning a color scale that is based on other well logs, often gamma ray or photoelectric effect, or other derived variables. Contrasts between reservoir pore types and fluid saturations are reflected in changing patterns on the crossplot and can help discriminate and characterize reservoir heterogeneity. Many hundreds of analyses of well logs facilitated by spreadsheet and object-oriented programming have provided the means to distinguish patterns typical of certain complex pore types (size and connectedness) for sandstones and carbonate reservoirs, occurrences of irreducible water saturation, and presence of transition zones. The result has been an improved means to evaluate potential production, such as bypassed pay behind pipe and in old exploration wells, or to assess zonation and continuity of the reservoir. Petrofacies analysis in this study was applied to distinguishing flow units and including discriminating pore type as an assessment of reservoir conformance and continuity. The analysis is facilitated through the use of colorimage cross sections depicting depositional sequences, natural gamma ray, porosity, and permeability. Also, cluster analysis was applied to discriminate petrophysically similar reservoir rock.

AAPG Memoir↗

USGS1997

Kansas geological survey's Digital Petroleum Atlas (DPA) project

The Kansas Digital Petroleum Atlas (DPA) is a new approach to generating and publishing petroleum reservoir, field, play and basin studies. Atlas products are available anywhere in the world using a standard point-and-click World-Wide-Web interface. All information and technology in the DPA can be accessed, manipulated and downloaded in order to provide efficient transfer of the technology for client-defined solutions. The DPA design provides a dynamic product that is constantly evolving through new information structures, the latest research results, and incorporation of additional data. Through complete and flexible user access to both interpretative products and underlying reservoir and well data, the DPA significantly alters the relationship between research results, data access, and the transfer of technology.

Proceedings - SPE Annual Technical Conference and ↗

USGS1994

Dissolution of bedded rock salt: A seismic profile across the active eastern margin of the Hutchinson Salt Member, central Kansas

Since late Tertiary, bedded rock salt of the Permian Hutchinson Salt Member has been dissolved more-or-less continuously along its active eastern margin in central Kansas as a result of sustained contact with unconfined, undersaturated groundwater. The associated westward migration of the eastern margin has resulted in surface subsidence and the contemporaneous sedimentation of predominantly valley-filling Quarternary alluvium. In places, these alluvium deposits extend more than 25 km to the east of the present-day edge of the main body of contiguous rock salt. The margin could have receded this distance during the past several million years. From an environmental perspective, the continued leaching of the Hutchinson Salt is a major concern. This predominantly natural dissolution occurs in a broad zone across the central part of the State and adversely affects groundwater and surface-water quality as nonpoint source pollution. Significant surface subsidence occurs as well. Most of these subsidence features have formed gradually; others developed in a more catastrophic manner. The latter in particular pose real threats to roadways, railways, and buried oil and gas pipelines. In an effort to further clarify the process of natural salt dissolution in central Kansas and with the long-term goal of mitigating the adverse environmental affects of such leaching, the Kansas Geological Survey acquired a 4-km seismic profile across the eastern margin of the Hutchinson Salt in the Punkin Center area of central Kansas. The interpretation of these seismic data (and supporting surficial and borehole geologic control) is consistent with several hypotheses regarding the process and mechanisms of dissolution. More specifically these data support the theses that: 1. (1) Dissolution along the active eastern margin of the Hutchinson Salt Member was initiated during late Tertiary. Leaching has resulted in the steady westward migration of the eastern margin, surface subsidence, and the contemporaneous deposition of predominantly valley-filling Quarternary alluvium. 2. (2) Along the active eastern margin, the rock salt has been leached vertically from the top down, and horizontally along the uppermost remnant bedded soluble layer(s). As a result, the eastern margin thickens gradually (up to 90 m) and in a stepwise manner from east to west for distances on the order 5-15 km. 3. (3) In places, the Hutchinson Salt Member has been leached locally along NNE-trending paleoshear zones situated to the west of the present-day edge of the main body of contiguous rock salt. Leaching at these sites initiated when the main dissolution front impinged upon preexisting shear zones. ?? 1994.

Computers & Geosciences↗

USGS1988

Composition and stable-isotope geochemistry of natural gases from Kansas, Midcontinent, U.S.A.

More than 28??1012 ft.3 (79??1010 m3) of natural gas and 5.3??109 bbl (8.4??108 m3) of oil have been produced in Kansas, U.S.A., from Paleozoic carbonate and sandstone reservoirs on structural uplifts and shallow embayments along the northern margin of the Anadarko basin. A heavily-explored, geologically well-characterized state, Kansas is an excellent place to study hydrocarbon migration and to test geochemical models for the origin of natural gases. Immature to marginally-mature rocks of eastern Kansas (Cherokee and Forest City basins) produce mixed microbial and thermogenic gases. Gases in this region have wetness = 0.03-51%, methane ??13C = -65 to -43??? and methane ??D = -260 to -150???. Gases from central and western Kansas (Nemaha uplift to Hugoton embayment) are entirely thermogenic and have wetness =4-51%, methane ??13C = -48 to -39??? and methane ??D = -195 to -140???. Ethane and propane ??13C-values throughout Kansas vary from -38 to -28??? and from -35 to -24???, respectively. Mature thermogenic gas (generated from source rocks in southwestern Kansas and the Anadarko basin with 1.0% ??? Ro ??? 1.4%) is recognized throughout the state. Lateral migration into shallow reservoirs on the Central Kansas and northern Nemaha uplifts and in the Cherokee basin probably occurred along basal Pennsylvanian conglomerates and weathered Lower Paleozoic carbonates at the regional sub-Pennsylvanian unconformity. Early thermogenic gas (generated by local source rocks with Ro ??? 0.7%) is recognized in isolated fields in the Salina and Forest City basins, in Ordovician reservoirs beneath the sub-Pennsylvanian unconformity in the Cherokee basin, and in reservoirs generally above the unconformity in the Cherokee and Sedgwick basins, the eastern Central Kansas uplift and the Hugoton embayment. ?? 1988.

Chemical Geology↗

USGS1985

Resolving controls on epeiric sedimentation using trend surface analysis

An understanding of patterns of regional sedimentation is crucial to identifying trends of perspective petroleum reservoirs. The Upper Pennsylvanian, Missourian Kansas City Group consists of repetitions of widespread carbonate rock and shale. Each of four cyclothems chosen for subsurface study of western Kansas contains transgressive and regressive lithofacies with evidence of extensive subaerial exposure across the entire paleoshelf. Distribution of carbonate facies on the 350+ km-wide shelf was affected strongly by slight changes in structural configuration of the shelf and variations in sea level. Polynomial trend surface models prepared from selected wireline log information for four successive cyclothems assist in resolving regional and local patterns of sedimentation and help to access the effect of subtle structural deformation on sedimentation. Isopachs of marine portions of four cyclothems were fit by fourth-order trend surfaces, optimizing fit by comparing goodness-of-fit and minimizing skewness of residuals using the smallest order surface. Several cyclothems showed simple patterns of regional, basinward thickening with local, strike-elongated anomalies where goodness-of-fit was maximized with increasing order. One cyclothem did not converge to a good fit at small orders nor did distribution of residuals indicate convergence toward zero. Both anomalies reflected a more complex surface. Rather than thickening regionally, the pattern created by this anomalous cyclothem was more irregular. Mapped patterns resemble those of the present-day structural configuration of these horizons suggesting a general persistence in similar epeirogenic deformation. ?? 1985 Plenum Publishing Corporation.

Journal of the International Association for Mathe↗