Geology topics

W.A. Elders

Publications and source records attributed to W.A. Elders.

4 recordsLinked to original sources

USGS2012

Composition and origin of rhyolite melt intersected by drilling in the Krafla geothermal field, Iceland

The Iceland Deep Drilling Project Well 1 was designed as a 4- to 5-km-deep exploration well with the goal of intercepting supercritical hydrothermal fluids in the Krafla geothermal field, Iceland. The well unexpectedly drilled into a high-silica (76.5 % SiO 2 ) rhyolite melt at approximately 2.1 km. Some of the melt vesiculated while extruding into the drill hole, but most of the recovered cuttings are quenched sparsely phyric, vesicle-poor glass. The phenocryst assemblage is comprised of titanomagnetite, plagioclase, augite, and pigeonite. Compositional zoning in plagioclase and exsolution lamellae in augite and pigeonite record changing crystallization conditions as the melt migrated to its present depth of emplacement. The in situ temperature of the melt is estimated to be between 850 and 920 °C based on two-pyroxene geothermometry and modeling of the crystallization sequence. Volatile content of the glass indicated partial degassing at an in situ pressure that is above hydrostatic (~16 MPa) and below lithostatic (~55 MPa). The major element and minor element composition of the melt are consistent with an origin by partial melting of hydrothermally altered basaltic crust at depth, similar to rhyolite erupted within the Krafla Caldera. Chondrite-normalized REE concentrations show strong light REE enrichment and relative flat patterns with negative Eu anomaly. Strontium isotope values (0.70328) are consistent with mantle-derived melt, but oxygen and hydrogen isotope values are depleted (3.1 and −118 ‰, respectively) relative to mantle values. The hydrogen isotope values overlap those of hydrothermal epidote from rocks altered by the meteoric-water-recharged Krafla geothermal system. The rhyolite melt was emplaced into and has reacted with a felsic intrusive suite that has nearly identical composition. The felsite is composed of quartz, alkali feldspar, plagioclase, titanomagnetite, and augite. Emplacement of the rhyolite magma has resulted in partial melting of the felsite, accompanied locally by partial assimilation. The interstitial melt in the felsite has similar normalized SiO 2 content as the rhyolite melt but is distinguished by higher K 2 O and lower CaO and plots near the minimum melt composition in the granite system. Augite in the partially melted felsite has re-equilibrated to more calcic metamorphic compositions. Rare quenched glass fragments containing glomeroporphyritic crystals derived from the felsite show textural evidence for resorption of alkali feldspar and quartz. The glass in these fragments is enriched in SiO 2 relative to the rhyolite melt or the interstitial felsite melt, consistent with the textural evidence for quartz dissolution. The quenching of these melts by drilling fluids at in situ conditions preserves details of the melt–wall rock interaction that would not be readily observed in rocks that had completely crystallized. However, these processes may be recognizable by a combination of textural analysis and in situ analytical techniques that document compositional heterogeneity due to partial melting and local assimilation.

Contributions to Mineralogy and Petrology↗

USGS2011

Origin of a rhyolite that intruded a geothermal well while drilling at the Krafla volcano, Iceland

Magma flowed into an exploratory geothermal well at 2.1 km depth being drilled in the Krafla central volcano in Iceland, creating a unique opportunity to study rhyolite magma in situ in a basaltic environment. The quenched magma is a partly vesicular, sparsely phyric, glass containing ∼1.8% of dissolved volatiles. Based on calculated H 2 O-CO 2 saturation pressures, it degassed at a pressure intermediate between hydrostatic and lithostatic, and geothermometry indicates that the crystals in the melt formed at ∼900 °C. The glass shows no signs of hydrothermal alteration, but its hydrogen and oxygen isotopic ratios are much lower than those of typical mantle-derived magmas, indicating that this rhyolite originated by anhydrous mantle-derived magma assimilating partially melted hydrothermally altered basalts.

Krafla volcano↗

USGS1986

SALTON SEA SCIENTIFIC DRILLING PROJECT: SCIENTIFIC PROGRAM.

The Salton Sea Scientific Drilling Project, was spudded on 24 October 1985, and reached a total depth of 10,564 ft. (3. 2 km) on 17 March 1986. There followed a period of logging, a flow test, and downhole scientific measurements. The scientific goals were integrated smoothly with the engineering and economic objectives of the program and the ideal of 'science driving the drill' in continental scientific drilling projects was achieved in large measure. The principal scientific goals of the project were to study the physical and chemical processes involved in an active, magmatically driven hydrothermal system. To facilitate these studies, high priority was attached to four areas of sample and data collection, namely: (1) core and cuttings, (2) formation fluids, (3) geophysical logging, and (4) downhole physical measurements, particularly temperatures and pressures.

Bulletin. Geothermal Resources Council↗

USGS1981

Vitrinite reflectance geothermometry and apparent heating duration in the Cerro Prieto geothermal field

Vitrinite reflectance measured in immersion oil ( R o ) on kerogen extracted from hydrothermally altered mudstones in borehole M-84 at the Cerro Prieto geothermal field exhibit an increase in mean reflectance ( R o "> R o ) from 0.12 per cent at 0.24 km depth to 4.1 per cent at 1.7 km depth. Downhole temperatures measured over this interval increase from about 60° to 340°C. These R o "> R o data plotted against temperature fall along an exponential curve with a coefficient of determination of about 0.8. Other boreholes sampled in the field show similar relationships. A regression curve calculated for temperature and R o "> R o in borehole M-105 correctly predicts temperatures in other boreholes within the central portion of the geothermal system. The correlation between the reflectance values and logged temperature, together with consistent temperature estimates from fluid inclusion and oxygen isotope geothermometry, indicates that changes in R o "> R o are an accurate and sensitive recorder of the maximum temperature attained. Therefore, vitrinite reflectance can be used in this geothermal system to predict the undisturbed temperature in a geothermal borehole during drilling before it regains thermal equilibrium. Although existing theoretical functions which relate R o "> R o to temperature and duration of heating are inaccurate, empirical temperature- R o "> R o curves are still useful for geothermometry. A comparison of temperature- R o "> R o regression curves derived from nine boreholes within the Cerro Prieto system suggests that heating across the central portion of the field occurred penecontemporaneously, but varies near margins. Boreholes M-93 and M-94 appear to have cooled from their maximum temperatures, whereas M-3 and Prian-1 have only recently been heated. Comparison of the temperature- R o "> R o data from the Salton Sea, California, geothermal system indicates that the duration of heating has been longer there than at the Cerro Prieto field.

Geothermics↗