USGS ScienceSearch

Geology topics

Thomas F. Cuffney

Publications and source records attributed to Thomas F. Cuffney.

30 records · Page 2Linked to original sources

Selected Physical, Chemical, and Biological Data Used to Study Urbanizing Streams in Nine Metropolitan Areas of the United States, 1999-2004

This report documents and summarizes physical, chemical, and biological data collected during 1999-2004 in a study titled Effects of Urbanization on Stream Ecosystems, undertaken as part of the U.S. Geological Survey's National Water-Quality Assessment Program. Data-collection methods and data processing are described in this report for streamflow; stream temperature; instream chemistry; instream aquatic habitat; and algal, macroinvertebrate, and fish communities. Data summaries prepared for analytical use are presented in downloadable data tables.

Data Series

Derivation of Nationally Consistent Indices Representing Urban Intensity Within and Across Nine Metropolitan Areas of the Conterminous United States

Two nationally consistent multimetric indices of urban intensity were developed to support studies of the effects of urbanization on streams in nine metropolitan areas of the conterminous United States: Atlanta, Georgia; Birmingham, Alabama; Boston, Massachusetts; Dallas-Fort Worth, Texas; Denver, Colorado; Milwaukee-Green Bay, Wisconsin; Portland, Oregon; Raleigh, North Carolina; and Salt Lake City, Utah. These studies were conducted as a part of the U.S. Geological Survey's National Water-Quality Assessment Program. These urban intensity indices were used to define gradients of urbanization and to interpret biological, physical, and chemical changes along these gradients. Ninety census, land-cover, and infrastructure variables obtained from nationally available databases were evaluated. Only variables that exhibited a strong and consistent linear relation with 2000 population density were considered for use in the indices. Housing-unit density (HUDEN), percentage of basin area in developed land (P_NLCD1_2), and road density (ROADDEN) were selected as the best representatives of census, land-cover, and infrastructure variables. The metropolitan area national urban intensity index (MA-NUII) was scaled to represent urban intensity within each metropolitan area and ranged from 0 (little or no urban) to 100 (maximum urban) for sites within each metropolitan area. The national urban intensity index (NUII) was scaled to represent urban intensity across all nine metropolitan areas and ranged from 0 to 100 for all sites. The rates at which HUDEN, P_NLCD1_2, and ROADDEN changed with changes in population density varied among metropolitan areas. Therefore, these variables were adjusted to obtain a more uniform rate of response across metropolitan areas in the derivation of the NUII. The NUII indicated that maximum levels of urban intensity occurred in the West and Midwest rather than in the East primarily because small inner-city streams in eastern metropolitan areas are buried and converted to storm drains or sewers and because of higher density development in the Western and Central United States. The national indices (MA-NUII, NUII) were compared to indices that were derived independently for each metropolitan area (MA-UII) based on variables that were of local interest. The MA-UIIs, which were based on 5 to 40 variables, tended to overestimate urban intensity relative to the national indices particularly when the MA-UII was composed of large numbers of variables that were not linearly related to population density as in Denver, Dallas-Fort Worth, and Milwaukee-Green Bay.

Scientific Investigations Report

Methods for Processing and Summarizing Time-Series Temperature Data Collected as Part of the National Water-Quality Assessment Program Studies on the Effects of Urbanization on Stream Ecosystems

Temperature data and summary statistics are presented for 256 sites in 9 metropolitan areas as part of the U.S. Geological Survey National Water-Quality Assessment Program studies of the effects of urbanization on stream ecosystems. The computer program (GRAN) that was developed to derive uniform data granularity and calculate temperature statistics (means, standard deviations, rates of change, degree days) is described, as are the methods used to estimate missing daily mean temperatures, degree days (annual and summer periods), and 7-day running averages of daily mean temperatures.

Data Series

Selected Physical, Chemical, and Biological Data for 30 Urbanizing Streams in the North Carolina Piedmont Ecoregion, 2002-2003

This report provides summarized physical, chemical, and biological data collected during a study of the effects of urbanization on stream ecosystems as part of the U.S. Geological Survey's National Water-Quality Assessment study. The purpose of this study was to examine differences in biological, chemical, and physical characteristics of streams across a gradient of urban intensity. Thirty sites were selected along an urbanization gradient that represents conditions in the North Carolina Piedmont ecoregion, including the cities of Raleigh, Durham, Cary, Greensboro, Winston-Salem, High Point, Asheboro, and Oxford. Data collected included streamflow variability, stream temperature, instream chemistry, instream aquatic habitat, and collections of the algal, macroinvertebrate, and fish communities. In addition, ancillary data describing land use, socioeconomic conditions, and urban infrastructure were compiled for each basin using a geographic information system analysis. All data were processed and summarized for analytical use and are presented in downloadable data tables, along with the methods of data collection and processing.

North Carolina

The effects of urbanization on the biological, physical, and chemical characteristics of coastal New England streams

During August 2000, responses of biological communities (invertebrates, fish, and algae), physical habitat, and water chemistry to urban intensity were compared among 30 streams within 80 miles of Boston, Massachusetts. Sites chosen for sampling represented a gradient of the intensity of urban development (urban intensity) among drainage basins that had minimal natural variability. In this study, spatial differences were used as surrogates for temporal changes to represent the effects of urbanization over time. The degree of urban intensity for each drainage basin was characterized with a standardized urban index (0-100, lowest to highest) derived from land cover, infrastructure, and socioeconomic variables. Multivariate and multimetric analyses were used to compare urban index values with biological, physical, and chemical data to determine how the data indicated responses to urbanization. Multivariate ordinations were derived for the invertebrate-, fish-, and algae-community data by use of correspondence analysis, and ordinations were derived for the chemical and physical data by use of principal-component analysis. Site scores from each of the ordinations were plotted in relation to the urban index to test for a response. In all cases, the primary axis scores showed the strongest response to the urban index, indicating that urbanization was a primary factor affecting the data ordination. For the multimetric analyses, each of the biological data sets was used to calculate a series of community metrics. For the sets of chemical and physical data, the individual variables and various combinations of individual variables were used as measured and derived metrics, respectively. Metrics that were generally most responsive to the urban index for each data set included: EPT (Ephemeroptera, Plecoptera, Trichoptera) taxa for invertebrates; cyprinid taxa for fish; diatom taxa for algae; bicarbonate, conductivity, and nitrogen for chemistry; and water depth and temperature for physical habitat. The slopes of the responses generally were higher between the urban index values of 0 to 35, indicating that the greatest change in aquatic health may occur between low and moderate levels of urban intensity. Additionally, many of the responses showed that at urban index values greater than 35, there was a threshold effect where the response variable no longer changed with respect to urban intensity. Recognizing and understanding this type of response is important in management and monitoring programs that rely on decisive interpretations of variable responses. Any biological, physical, or chemical variable that is used to characterize stream health over a gradient of disturbance would not be a reliable indicator when a level of disturbance is reached where the variable does not respond in a predictable manner.

Maine, Massachusetts, New Hampshire

User's Manual for the National Water-Quality Assessment Program Invertebrate Data Analysis System (IDAS) Software: Version 3

The Invertebrate Data Analysis System (IDAS) software provides an accurate, consistent, and efficient mechanism for analyzing invertebrate data collected as part of the National Water-Quality Assessment Program and stored in the Biological Transactional Database (Bio-TDB). The IDAS software is a stand-alone program for personal computers that run Microsoft (MS) Windows?. It allows users to read data downloaded from Bio-TDB and stored either as MS Excel? or MS Access? files. The program consists of five modules. The Edit Data module allows the user to subset, combine, delete, and summarize community data. The Data Preparation module allows the user to select the type(s) of sample(s) to process, calculate densities, delete taxa based on laboratory processing notes, combine lifestages or keep them separate, select a lowest taxonomic level for analysis, delete rare taxa, and resolve taxonomic ambiguities. The Calculate Community Metrics module allows the user to calculate over 130 community metrics, including metrics based on organism tolerances and functional feeding groups. The Calculate Diversities and Similarities module allows the user to calculate nine diversity and eight similarity indices. The Data export module allows the user to export data to other software packages and produce tables of community data that can be imported into spreadsheet and word-processing programs. Though the IDAS program was developed to process invertebrate data downloaded from USGS databases, it will work with other data sets that are converted to the USGS (Bio-TDB) format. Consequently, the data manipulation, analysis, and export procedures provided by the IDAS program can be used by anyone involved in using benthic macroinvertebrates in applied or basic research.

Open-File Report

Water-quality and physical characteristics of streams in the Treyburn development area of Falls Lake watershed, North Carolina, 1994–98

Treyburn is a 5,400-acre planned, mixed-use development in the upper Neuse River Basin of North Carolina. The development, which began in 1986, is located in the Falls Lake watershed near three water-supply reservoirs-Lake Michie to the north, Falls Lake to the southeast, and Little River Reservoir to the west. A study began in 1988 to determine the water-quality characteristics of surface waters in and around the Treyburn development area. Data to characterize water quality at five different sites were collected from July 1994 through September 1998. Data from a previous study are available for some sites for the period 1988–93. The sites were selected to characterize water quality and quantity in and near the Treyburn development and included an undeveloped basin, a relatively small basin containing single-family residences and a golf course, a basin downstream from the western part of the development with some industrial land use, and two basins unaffected by the development where agricultural land is being converted to urban and forested land use. Suspended-sediment concentrations ranged from less than 1 to 581 milligrams per liter and were fairly uniform among the five sites. Median suspended-sediment concentrations ranged from 12 to 21 milligrams per liter. Few concentrations of metals and trace elements, except aluminum, iron, and manganese, exceeded the laboratory reporting levels or water-quality criteria. At one site, concentrations of silver exceeded both the action level and the reporting level; copper was detected at each site and exceeded the action level of 7 micrograms per liter at one site. The lowest range and median concentrations of total organic nitrogen, nitrate, ammonia, total phosphorus, and orthophosphorus occurred in the relatively undisturbed, forested site. The maximum concentration of organic nitrogen (1.97 milligrams per liter) occurred at one of the sites unaffected by the Treyburn development where agricultural land is being converted to urban land use. At all sites, ammonia concentrations ranged from less than 0.02 to 0.36 milligram per liter, and median concentrations were near the reporting level. Nitrate concentrations ranged from less than 0.05 to 0.80 milligram per liter. Phosphorus concentrations at all of the Treyburn study sites were low compared to phosphorus concentrations that typically exceed 0.1 milligram per liter at sites sampled nationally for the U.S. Geological Survey National Water-Quality Assessment Program, including the Albemarle-Pamlico study area in North Carolina. Total phosphorus concentrations ranged from less than 0.01 to 0.87 milligram per liter, and orthophosphorus concentrations ranged from less than 0.01 to 0.76 milligram per liter as phosphorus. The maximum concentrations of total phosphorus and orthophosphorus occurred at the Treyburn residential and golf-course site, likely as a result of the fertilizer applications associated with these two types of land use. Of the 119 different pesticides tested, 11 were detected in concentrations that exceeded the laboratory reporting levels, though in very low concentrations. Water samples from the residential and golf-course site contained the greatest number of pesticides (10). Five of six samples collected at this site had detectable concentrations of simazine, atrazine, and pendimethalin-all herbicides used to control weeds in crops or turf. Channel geometry was assessed at eight sites in the study area in February 1997. These sites were separated into three groups based on mean bank angle and mean channel width-to-depth ratios. Channel gradient ranged from 0.04 to 1.63 percent, and mean cross sectional area ranged from 31 to 1,227 square feet. Three macroinvertebrate samples were collected from each of 10 sites. These three samples were from areas designated as richest targeted habitats, depositional targeted habitats, and qualitative multitargeted habitats. Over 230 taxa were identified fromthese 10 sites. The North Carolina Biotic Indices ranged from 4.98 (excellent) to 6.82 (fair). River sites tended to have higher total taxa richness (91-108) than did the small, intermittent streams (49–84) or the midsize Mountain Creek (85). Intermittent streams represent fairly hostile environments for most aquatic organisms. Samples from richest targeted habitats typically were more than twice as rich as samples from depositional targeted habitats and represented from 50 to 75 percent of the taxa found at each site (mean of 62 percent). The industrial site lacked many of the mayfly taxa that were present at the undeveloped site. Mayflies are very sensitive to metals contamination, and their absence may indicate a possible problem. The supporting chemical information is not available for the industrial site, and additional study would be necessary to substantiate this possibility. The two sites with residential and golf-course land use tended to support more different types of sensitive invertebrates (that is, mayflies, stoneflies, and caddis flies) than did the forested/residential site, though the abundances of these taxa were very similar. Land-use effects were not evident based on a comparison among these sites. Indirect gradient analysis was used to determine patterns in the distribution of invertebrates and to examine the relations between these patterns and physical and chemical site characteristics determined in this study. This analysis supports the contention that the dominant factors accounting for the distribution of benthic invertebrates are associated with natural factors, such as basin size, rather than land use. Constituent loads at five study sites were calculated for nutrients, suspended sediment, and total organic carbon. The median annual total nitrogen yield ranged from 0.635 to 1.63 tons per square mile. The median annual phosphorus yield ranged from 0.046 to 0.619 ton per square mile, and the median annual orthophosphate yield ranged from 0.022 to 0.379 ton per square mile. Orthophosphate accounted for more than half of the phosphorus yield at the residential and golf-course site. The maximum suspended-sediment yield was 422 tons per square mile, and the minimum yield was 32 tons per square mile. The suspended-sediment yield at one of the sites unaffected by the Treyburn development where agricultural was being converted to urban land use was high compared to other forested basins in the Piedmont of North Carolina. Total organic carbon data sufficient for estimating loads were available at three of the five sites. Of these three sites, the undeveloped site had substantially more organic carbon yield than the other two sites. The only significant water-quality trend (alpha=0.05) was a downward trend for total nitrogen and organic nitrogen at the undeveloped site. The trend slope was small, only 0.019 milligram per liter as nitrogen or less than 9 percent of the median organic nitrogen concentration. No trend was observed for nitrite plus nitrate or for ammonia, indicating that the downward trend in total nitrogen was due only to organic nitrogen.

North Carolina

Methods of analysis by the U.S. Geological Survey National Water Quality Laboratory-Processing, taxonomy, and quality control of benthic macroinvertebrate samples

Qualitative and quantitative methods to process benthic macroinvertebrate (BMI) samples have been developed and tested by the U.S. Geological Survey?s National Water Quality Laboratory Biological Group. The qualitative processing method is based on visually sorting a sample for up to 2 hours. Sorting focuses on attaining organisms that are likely to result in taxonomic identifications to lower taxonomic levels (for example, Genus or Species). Immature and damaged organisms are also sorted when they are likely to result in unique determinations. The sorted sample remnant is scanned briefly by a second person to determine if obvious taxa were missed. The quantitative processing method is based on a fixed-count approach that targets some minimum count, such as 100 or 300 organisms. Organisms are sorted from randomly selected 5.1- by 5.1-centimeter parts of a gridded subsampling frame. The sorted remnant from each sample is resorted by a second individual for at least 10 percent of the original sort time. A large-rare organism search is performed on the unsorted remnant to sort BMI taxa that were not likely represented in the sorted grids. After either qualitatively or quantitatively sorting the sample, BMIs are identified by using one of three different types of taxonomic assessment. The Standard Taxonomic Assessment is comparable to the U.S. Environmental Protection Agency Rapid Bioassessment Protocol III and typically provides Genus- or Species-level taxonomic resolution. The Rapid Taxonomic Assessment is comparable to the U.S. Environmental Protection Agency Rapid Bioassessment Protocol II and provides Familylevel and higher taxonomic resolution. The Custom Taxonomic Assessment provides Species-level resolution whenever possible for groups identified to higher taxonomic levels by using the Standard Taxonomic Assessment. The consistent use of standardized designations and notes facilitates the interpretation of BMI data within and among water-quality studies. Taxonomic identifications are quality assured by verifying all referenced taxa and randomly reviewing 10 percent of the taxonomic identifications performed weekly by Biological Group taxonomists. Taxonomic errors discovered during this review are corrected. BMI data are reviewed for accuracy and completeness prior to release. BMI data are released phylogenetically in spreadsheet format and unprocessed abundances are corrected for laboratory and field subsampling when necessary.

Open-File Report

Surface-water-quality assessment of the Yakima River basin, Washington: Overview of major findings, 1987-91

Surface-water-quality conditions were assessed in the Yakima River Basin, which drains 6,155 square miles of mostly forested, range, and agricultural land in Washington. The Yakima River Basin is one of the most intensively farmed and irrigated areas in the United States, and is often referred to as the “Nation’s Fruitbowl.” Natural and anthropogenic sources of contaminants and flow regulation control water-quality conditions throughout the basin. This report summarizes the spatial and temporal distribution, sources, and implications of the dissolved oxygen, water temperature, pH, suspended sediment, nutrient, organic compound (pesticide), trace element, fecal indicator bacteria, radionuclide, and aquatic ecology data collected during the 1987–91 water years. The Yakima River descends from a water surface altitude of 2,449 feet at the foot of Keechelus Dam to 340 feet at its mouth downstream from Horn Rapids Dam near Richland. The basin can be divided into three distinct river reaches on the basis of its physical characteristics. The upper reach, which drains the Kittitas Valley, has a high gradient, with an average streambed slope of 14 feet per mile (ft/mi) over the 74 miles from the foot of Keechelus Dam (river mile [RM] 214.5) to just upstream from Umtanum. The middle reach, which drains the Mid Valley, extends a distance of 33 miles from Umtanum (RM 140.4) to just upstream from Union Gap and also has a high gradient, with an average streambed slope of 11 ft/mi. The lower reach of the Yakima River drains the Lower Valley and has an average streambed slope of 7 ft/mi over the 107 miles from Union Gap (RM 107.2) to the mouth of the Yakima River. These reaches exhibited differences in water-quality conditions related to the differences in geologic sources of contaminants and land use. Compared with the rest of the basin, the Kittitas Valley and headwaters of the Naches River Subbasin had relatively low concentrations and loads of suspended sediment, nutrients, organic compounds, and fecal indicator bacteria. There were very few failures to meet the Washington State dissolved oxygen standard or exceedances of the water temperature and pH standards in this reach. In general, these areas are considered to be areas of lessdegraded water quality in the basin. The preTertiary metamorphic and intrusive rocks of the Cle Elum and Teanaway River Subbasins, however, were found to be significant geologic sources of antimony, arsenic, chromium, copper, mercury, nickel, selenium, and zinc. As a result, the arsenic, chromium, and nickel concentrations measured in the streambed sediment of the Kittitas Valley were 13 to 74 times higher than those measured in the Lower Valley. The Mid and Lower Valleys had similar water-quality conditions, governed by the intensive agricultural and irrigation activities, highly erosive landscapes, and flow regulation. Most of the failures to meet the Washington State standards for dissolved oxygen and exceedances of the standards for water temperature and pH occurred in the Mid and Lower Valleys. Agricultural drains in the Mid and Lower Valleys were found to be significant sources of nutrients, suspended sediment, pesticides, and fecal indicator bacteria. Downstream from the irrigation diversions near Union Gap, summertime streamflow in the Yakima River was drastically reduced to only a few hundred cubic feet per second. In the lower Yakima River, agricultural return flow typically accounts for as much as 80 percent of the main stem summertime flow near the downstream terminus of the basin. Therefore, the water-quality characteristics of the lower Yakima River resemble those of the agricultural drains. The highest fecal bacteria concentrations (35,000 colonies of Escherichia coli per 100 milliliters of water) were measured in the Granger/Sunnyside area, the location of most of the livestock in the basin. The east side area of the Lower Valley (area east of the Yakima River) was the predominant source area for suspended sediment and pesticides in the basin. This area had the largest acreage of irrigated land and generally received the largest application of pesticides. Owing to the highly erosive soils of the area, the suspended sediment load from the east side in June 1989 (320 kilograms per day) was five or more times larger than from any other area, and the loads of several of the more hydrophobic organic compounds were four or more times larger. An ecological assessment of the Yakima River Basin ranked physical, chemical, and biological conditions at impaired (degraded) sites against reference sites in an effort to understand how land use changes physical and chemical site characteristics and how biota respond to these changes. For this assessment, the basin was divided into four natural ecological categories: (1) Cascades ecoregion, (2) Eastern Cascades Slopes and Foothills ecoregion, (3) Columbia Basin ecoregion, and (4) large rivers. Each of these categories has a unique combination of climate and landscape features that produces a distinctive terrestrial vegetation assemblage. In the combined Cascades and Eastern Cascades site group, which had the fewest impaired sites, the metals index was the only physical and chemical index that indicated any impairment. The moderate levels of impairment noted in the invertebrate and algal communities were not, however, associated with metals, and may have been related to the effects of logging, although the intensity of logging was not directly quantified in this study. Sites in the Columbia Basin site group were all moderately or severely impaired with the exception of the two reference sites (Umtanum Creek and Satus Creek below Dry Creek), which showed no physical, chemical, or biological impairment. Three sites were heavily affected by agriculture (Granger Drain, Moxee Drain, and Spring Creek) and were listed as severely impaired by most of the physical, chemical, and biological condition indices. Agriculture was the primary cause of the impairment of biological communities in this site group. The primary physical and chemical indicators of agricultural effects were nutrients, pesticides, dissolved solids, and substrate embeddedness, which all tended to increase with agricultural intensity. The biological effects of agriculture were manifested by a decrease in the abundance and number of native species of fish and invertebrates, a shift in algal communities to species indicative of eutrophic conditions, and higher abundances. There was also an increase in the abundance and number of nonnative fish species due to the prevalence of fish that are largely tolerant of nutrient-rich conditions. Main stem (large river) sites downstream from the city of Yakima exhibited severe impairment of fish communities associated with high levels of pesticides in fish tissues and the presence of external anomalies on fish.

Washington

Methods for collecting benthic invertebrate samples as part of the National Water-Quality Assessment Program

Benthic invertebrate communities are evaluated as part of the ecological survey component of the U.S. Geological Survey's National Water-Quality Assessment Program. These biological data are collected along with physical and chemical data to assess water-quality conditions and to develop an understanding of the factors that affect water-quality conditions locally, regionally, and nationally. The objectives of benthic invertebrate community characterizations are to (1) develop for each site a list of tax a within the associated stream reach and (2) determine the structure of benthic invertebrate communities within selected habitats of that reach. A nationally consistent approach is used to achieve these objectives. This approach provides guidance on site, reach, and habitat selection and methods and equipment for qualitative multihabitat sampling and semi-quantitative single habitat sampling. Appropriate quality-assurance and quality-control guidelines are used to maximize the ability to analyze data within and among study units.

Open-File Report

Methods for characterizing stream habitat as part of the National Water-Quality Assessment Program

Stream habitat is characterized in the U.S. Geological Survey's National Water-Quality Assessment Program as part of an integrated physical, chemical, and biological assessment of the Nation's water quality. The goal of stream habitat characterization is to relate habitat to other physical, chemical, and biological factors to describe water-quality conditions. To accomplish this goal, environmental settings are described at sites selected for water-quality assessment. In addition, spatial and temporal patterns in habitat are examined at local, regional, and national levels. Although habitat characterization is an important component of a number of Federal, State, and local water-quality assessment programs, no current set of habitat evaluation procedures meets the objectives of the habitat assessment component of the National Water-Quality Assessment Program. Evaluation of stream habitat is based on a spatially hierarchical framework that incorporates habitat data at basin, segment, reach, and microhabitat scales. This framework provides a basis for national consistency in collection techniques while allowing flexibility in habitat assessment within individual study units. Procedures are described for collecting habitat data at basin and stream segment scales that include use of geographic information system data bases, maps, and aerial photographs. Data collected at the stream reach scale include more than 34 riparian and instream habitat characteristics evaluated during onetime site visits, and surveys of the channel and riparian area during repeated sampling.

Open-File Report

Methods for collecting algal samples as part of the National Water-Quality Assessment Program

Benthic algae (periphyton) and phytoplankton communities are characterized in the U.S. Geological Survey's National Water-Quality Assessment Program as part of an integrated physical, chemical, and biological assessment of the Nation's water quality. This multidisciplinary approach provides multiple lines of evidence for evaluating water-quality status and trends, and for refining an understanding of the factors that affect water-quality conditions locally, regionally, and nationally. Water quality can be characterized by evaluating the results of qualitative and quantitative measurements of the algal community. Qualitative periphyton samples are collected to develop of list of taxa present in the sampling reach. Quantitative periphyton samples are collected to measure algal community structure within selected habitats. These samples of benthic algal communities are collected from natural substrates, using the sampling methods that are most appropriate for the habitat conditions. Phytoplankton samples may be collected in large nonwadeable streams and rivers to meet specific program objectives. Estimates of algal biomass (chlorophyll content and ash-free dry mass) also are optional measures that may be useful for interpreting water-quality conditions. A nationally consistent approach provides guidance on site, reach, and habitat selection, as well as information on methods and equipment for qualitative and quantitative sampling. Appropriate quality-assurance and quality-control guidelines are used to maximize the ability to analyze data locally, regionally, and nationally.

Open-File Report