USGS ScienceSearch

Geology topics

T. C. Duxbury

Publications and source records attributed to T. C. Duxbury.

9 recordsLinked to original sources

A new Mars Digital Image Model (MDIM 2.1) control network

The U.S. Geological Survey has recently completed a final revised version of its 231 m/pixel global Viking image mosaic of Mars that has substantially improved geodetic accuracy compared to versions released in 1991 and 2001. This mosaic, known as MDIM 2.1, is currently available in the USGS ISIS file format (see http://astrogeology.usgs.gov/Projects/MDIM21/) and will be formatted and submitted to the NASA Planetary Data System (PDS) in the near future for archiving as a single ~5-MB DVD volume. Positional control for MDIM 2.1 comes from a new geodetic/photogrammetric solution of the global Mars Mariner 9 and Viking image control network. The details of this network solution are described here. This network incorporates 1,054 Mariner 9 and 5,317 Viking Orbiter images. Accuracy of the new solution is improved primarily as the result of constraining all 37,652 control points to radii from Mars Orbiter Laser Altimeter (MOLA) data and adding 1,232 "ground control points" whose horizontal coordinates are also constrained by MOLA. The MOLA data are believed to have an absolute accuracy on the order of 100 m horizontally. Additional improvements result from use of updated timing and orientation data for the Viking Orbiter images, improved reseau measurements and hence distortion correction of the images, and careful checking and remeasurement of control points with large residuals. The RMS error of the solution is 15.8 µm (~1.3 Viking pixels, ~280 m on the ground). The IAU/IAG 2000 coordinate system is used for the network and the mosaic.

Conference Paper

A new Mars Digital Image Model (MDIM 2.1) control network

The U.S. Geological Survey has recently completed a final revised version of its 231 m/pixel global Viking image mosaic of Mars that has substantially improved geodetic accuracy compared to versions released in 1991 and 2001. This mosaic, known as MDIM 2.1, is currently available in the USGS ISIS file format and will be formatted and submitted to the NASA Planetary Data System (PDS) in the near future for archiving as a single ~5-MB DVD volume. Positional control for MDIM 2.1 comes from a new geodetic/photogrammetric solution of the global Mars Mariner 9 and Viking image control network. The details of this network solution are described here. This network incorporates 1,054 Mariner 9 and 5,317 Viking Orbiter images. Accuracy of the new solution is improved primarily as the result of constraining all 37,652 control points to radii from Mars Orbiter Laser Altimeter (MOLA) data and adding 1,232 "ground control points" whose horizontal coordinates are also constrained by MOLA. The MOLA data are believed to have an absolute accuracy on the order of 100 m horizontally. Additional improvements result from use of updated timing and orientation data for the Viking Orbiter images, improved reseau measurements and hence distortion correction of the images, and careful checking and remeasurement of control points with large residuals. The RMS error of the solution is 15.8 µm (~1.3 Viking pixels, ~280 m on the ground). The IAU/IAG 2000 coordinate system is used for the network and the mosaic.

Conference Paper

Preparing for THEMIS controlled global Mars mosaics

We have begun work to prepare for producing controlled 2001 Mars Odyssey THEMIS infrared (IR) and visible (VIS) global mosaics of Mars. This effort is being coordinated with colleagues from Arizona State University and on the THEMIS team who plan to address radiometric issues in making such mosaics. We are concentrating on geometric issues. Several areas of investigation are now in progress, including: a) characterizing the absolute pointing accuracy of THEMIS images; b) investigating whether automatic tie point matching algorithms could be used to provide connections between overlapping THEMIS images; c) developing algorithms to allow for the photogrammetric (bundle) adjustment of the THEMIS IR (line scanner) camera images. Our primary goal in this pilot study effort will be to make several test control THEMIS mosaics and better determine which methods could be used, which require development, and what level of effort is required, in order to make large regional or global controlled THEMIS mosaics.

Conference Paper

Mars Digital Image Model (MDIM) 2.1 control network

Positional control for MDIM 2.1 comes from a new geodetic/photogrammetric solution of the global Mars Mariner 9 and Viking image control network. The details of this network solution are described here. This network incorporates 1,054 Mariner 9 and 5,317 Viking Orbiter images. Accuracy of the new solution is improved primarily as the result of constraining all 37,652 control points to radii from Mars Orbiter Laser Altimeter (MOLA) data and adding 1,232 "ground control points" whose horizontal coordinates are also constrained by MOLA. The MOLA data are believed to have an absolute accuracy on the order of 100m horizontally. Additional improvements result from use of updated timing and orientation data for the Viking Orbiter images, improved reseau measurements and hence distortion correction of the images, and careful checking and remeasurement of control points with large residuals. The RMS error of the solution is 15.8 µm (~1.3 Viking pixels, ~280 m on the ground). The IAU/IAG 2000 coordinate system is used for the network and the mosaic.

Conference Paper

Mars Geodesy/Cartography Working Group recommendations on Mars cartographic constants and coordinate systems

NASA's Mars Geodesy/Cartography Working Group (MGCWG), established in 1998 and chaired since 2000 by one of us (TCD), consists of leading researchers in planetary geodesy and cartography at such diverse institutions as JPL, NASA Ames and Goddard Centers, Purdue and Ohio State Universities, Malin Space Science Systems, the German Center for Aerospace Research DLR, and the US Geological Survey, as well as representatives of the current and future Mars mission teams that are the customers for Mars maps. The purpose of the group is the coordinate the activities of the many agencies active in Mars geodesy and cartography in order to minimize redundant effort and ensure that the products needed by mission customers are generated. A specific objectives has been to avoid repeating the experience of the 1970s-80s, when competing researchers produced geodetic control solutions and maps of Mars that were mutually inconsistent. To this end, the MGCWG has recently assembled a set of preferred values for Mars cartographic constants, based on the best available data. These values have been transmitted to the International Astronomical Union and appear in the report of the IAU/IAG Working Group on Cartographic Coordinates and Rotational Elements of the Planets and Satellites as the officially recommended constants for Mars (Seidelmann et al., 2002). The MGCWG has also recommended to NASA that the USGS adopt the IAU-approved coordinate system of planetocentric latitude and east longitude for future maps of Mars, in the place of the (also IAU-approved) planetographic system with west longitude positive. This recommendation has recently been approved by NASA. In this paper we present the preferred values for Mars cartographic constants with discussion of the process by which they were derived, then discuss the rationale and implications of the use of east/planetocentric coordinates in future Mars maps.

Conference Paper

The Clementine mission to the Moon: Scientific overview

In the course of 71 days in lunar orbit, from 19 February to 3 May 1994, the Clementine spacecraft acquired just under two million digital images of the moon at visible and infrared wavelengths. These data are enabling the global mapping of the rock types of the lunar crust and the first detailed investigation of the geology of the lunar polar regions and the lunar far side. In addition, laser-ranging measurements provided the first view of the global topographic figure of the moon. The topography of many ancient impact basins has been measured, and a global map of the thickness of the lunar crust has been derived from the topography and gravity.

Science

Clementine observations of the Aristarchus region of the moon

Multispectral and topographic data acquired by the Clementine spacecraft provide information on the composition and geologic history of the Aristarchus region of the moon. Altimetry profiles show the Aristarchus plateau dipping about 1° to the north-northwest and rising about 2 kilometers above the surrounding lavas of Oceanus Procellarum to the south. Dark, reddish pyroclastic glass covers the plateau to average depths of 10 to 30 meters, as determined from the estimated excavation depths of 100- to 1000-meter-diameter craters that have exposed materials below the pyroclastics. These craters and the walls of sinuous rilles also show that mare basalts underlie the pyroclastics across much of the plateau. Near-infrared images of Aristarchus crater reveal olivine-rich materials and two kilometer-sized outcrops of anorthosite in the central peaks. The anorthosite could be either a derivative of local magnesium-suite magmatism or a remnant of the ferroan anorthosite crust that formed over the primordial magma ocean.

Science

Mariner 9 television observations of Phobos and Deimos

Mariner 9 photographs of Phobos and Deimos have yielded new information about the orbits, rotation periods, sizes, shapes, and surface characteristics of the satellites. Both satellites appear to be in synchronous rotation. They are irregular, heavily cratered bodies whose shapes appear to have been determined largely by impact fragmentation and spalling. The surfaces of both satellites have crater densities close to saturation and nearly identical, very low albedos. Lower limits on the tensile and yield strengths are estimated, and it is concluded that both satellites may consist of well-consolidated, though possibly highly fractured material.

Icarus

Mariner 9 television reconnaissance of Mars and its satellites: Preliminary results

At orbit insertion on 14 November 1971 the Martian surface was largely obscured by a dust haze with an extinction optical depth that ranged from near unity in the south polar region to probably greater than 2 over most of the planet. The only features clearly visible were the south polar cap, one dark, spot in Nix Olympica, and three dark spots in the Tharsis region. During the third week the atmosphere began to clear and surface visibility improved, but contrasts remained a fraction of their normal value. Each of the dark spots that apparently protrude through most of the dust-filled atmosphere has a crater or crater complex in its center. The craters are rimless and have featureless floors that, in the crater complexes, are at different levels. The largest crater within the southernmost spot is approximately 100 kilometers wide. The craters apparently were formed by subsidence and resemble terrestrial calderas. The south polar cap has a regular margin, suggesting very flat topography. Two craters outside the cap have frost on their floors; an apparent crater rim within the cap is frost free, indicating preferential loss of frost from elevated ground. If this is so then the curvilinear streaks, which were frost covered in 1969 and are now clear of frost, may be low-relief ridges. Closeup pictures of Phobos and Deimos show that Phobos is about 25 ±5 by 21 ±1 kilometers and Deimos is about 13.5 ± 2 by 12.0 ±0.5 kilometers. Both have irregular shapes and are highly cratered, with some craters showing raised rims. The satellites are dark objects with geometric albedos of 0.05.

Science