Geology topics
Publications and source records attributed to Simon J. Cantrell.
With the ever-increasing number of civil and commercial remote-sensing satellite launches in recent years, the Earth Observation community needs to better understand the quality of new data products as they become available for scientific research purposes.
Executive Summary The Joint Agency Commercial Imagery Evaluation (JACIE) partnership consists of six agencies representing the U.S. Government’s commitment to promoting the use of high-quality remotely sensed data to meet scientific and other Federal needs. These agencies are large consumers of remotely sensed data and bring extensive experience in the assessment and use of these data. The six agencies are as follows: National Aeronautics and Space Administration, National Geospatial-Intelligence Agency, National Oceanic and Atmospheric Administration, U.S. Department of Agriculture, U.S. Geological Survey, and National Reconnaissance Office. JACIE was formed in 2001 to assess the quality of data from the nascent commercial high-resolution satellite industry. Since then, JACIE has expanded its purview to include data at various resolutions, including commercial and civil. The processes and techniques used by the JACIE agencies to assess data quality have been compiled within this report to share them across the agencies and with others who want to assess remotely sensed imagery data or understand how data are assessed and reported by JACIE.
Executive Summary This report addresses system characterization of the Pléiades Neo satellite and is part of a series of system characterization reports produced and delivered by the U.S. Geological Survey Earth Resources Observation and Science Cal/Val Center of Excellence. These reports present and detail the methodology and procedures for characterization; present technical and operational information about the specific sensing system being evaluated; and provide a summary of test measurements, data retention practices, data analysis results, and conclusions. Pléiades Neo is a constellation of four identical very-high-resolution optical satellites operated by Airbus Defence and Space. The first two satellites, Pléiades Neo-3 and -4, were launched in April and August 2021, respectively. The next two satellites, launched in December 2022, did not reach orbit because of Vega-C launch vehicle failure. Pléiades Neo provides several technical improvements to previous Pléiades-HR satellites, including the addition of coastal aerosol (deep blue) and red edge spectral bands, with improved ground sample distance and swath. The Pléiades Neo satellites were designed and built by Airbus Defence and Space with the high-resolution, multispectral imager for Earth imaging and use the S950 optical satellite bus. The high-resolution sensor on Pléiades Neo collects Earth data in the visible and near-infrared region with six bands and a panchromatic band. The satellites can operate off nadir to achieve a revisit of less than 1 day. More information on Pléiades Neo satellites and sensors is available in the “Land Remote Sensing Satellites Online Compendium” ( https://calval.cr.usgs.gov/apps/compendium# ) and from the manufacturer ( https://www.intelligence-airbusds.com/imagery/constellation/pleiades-Neo/ ). The Earth Resources Observation and Science Cal/Val Center of Excellence system characterization team completed data analyses to characterize the geometric (interior and exterior), radiometric, and spatial performances. Results of these analyses indicate that Pléiades Neo has an interior geometric performance in the range of 0.01 meter (m; 0.008 pixel) to −0.017 m (−0.014 pixel) in band-to-band registration; an exterior geometric performance in the range of −7.015 m (−0.702 pixel) to 3.846 m (0.385 pixel) offset in comparison to Sentinel-2 using ground control points of 2.2 to 7.2 m (95-percent circular error); a radiometric performance in the range of −0.070 (minimum) to −0.053 (maximum) in offset and 1.107 (minimum) to 1.202 (maximum) in slope; and a spatial performance in the range of 1.002 to 1.226 pixels at full width at half maximum with a modulation transfer function at a Nyquist frequency in the range of 0.22 to 0.34 (bands 2–7).
Executive Summary This report addresses system characterization of the China-Brazil Earth Resources Satellite-4A (CBERS–4A) multispectral remote sensing satellite and is part of a series of system characterization reports produced and delivered by the U.S. Geological Survey Earth Resources Observation and Science Cal/Val Center of Excellence in 2021. These reports present and detail the methodology and procedures for characterization; present technical and operational information about the specific sensing system being evaluated; and provide a summary of test measurements, data retention practices, data analysis results, and conclusions. CBERS–4A is a joint Chinese-Brazilian medium-resolution satellite launched in December 2019 by the China National Space Agency/National Institute for Space Research (Brazil) on a Chang Zheng 4B rocket from the Taiyuan Satellite Launch Center for Earth resources monitoring. The CBERS–4A mission continues the CBERS mission that has been in continual operation since the launch of CBERS–1 in 1999. The CBERS–4A satellite was designed and built by Academia Chinesa de Tecnologia Espacial/National Institute for Space Research and uses the Phoenix-Eye bus. CBERS–4A carries the multispectral camera and wide field imager sensors for medium-resolution land imaging and the wide swath panchromatic and multispectral camera sensor for high-resolution land imaging. This assessment focused on the multispectral camera sensor only. More information on CBERS sensors is available in the “ 2020 Joint Agency Commercial Imagery Evaluation—Remote Sensing Satellite Compendium ” and at https://www.gov.br/pt-br/servicos/obter-imagens-de-sensoriamento-remoto-da-terra-geradas-pelo-satelite-cbers-04a . The Earth Resources Observation and Science Cal/Val Center of Excellence system characterization team completed data analyses to characterize the geometric (interior and exterior), radiometric, and spatial performances. Results of these analyses indicate that CBERS–4A provides an interior (band-to-band) geometric performance in the range of −0.02 to −0.16 pixel; an exterior geometric accuracy performance of −22.02 (−1.47 pixels) to −16.06 meters (−1.07 pixels); a radiometric accuracy performance of –0.006 to 0.925 (offset and slope); and a spatial performance for relative edge response in the range of 0.39 to 0.44, for full width at half maximum in the range of 2.38 to 2.56 pixels, and for a modulation transfer function at a Nyquist frequency in the range of 0.001 to 0.013.
Executive Summary This report addresses system characterization of the Maxar WorldView-3 satellite and is part of a series of system characterization reports produced and delivered by the U.S. Geological Survey Earth Resources Observation and Science Cal/Val Center of Excellence in 2020. These reports present and detail the methodology and procedures for characterization; present technical and operational information about the specific sensing system being evaluated; and provide a summary of test measurements, data retention practices, data analysis results, and conclusions. WorldView-3 is a high-resolution multispectral satellite launched in 2014 by Maxar Technologies on an Atlas V launch vehicle from Vandenberg Air Force Base in California for Earth resources monitoring. WorldView-3 provides substantial technical improvements to previous WorldView satellites, including spectral bands, ground sample distance, and swath. The WorldView-3 satellite was designed and built by Lockheed Martin for Maxar Technologies using the BCP–5000 bus with the WorldView-3 Imager and the Clouds, Aerosols, Vapors, Ice, and Snow sensor. The high-resolution WorldView-3 Imager is the main instrument, and the Clouds, Aerosols, Vapors, Ice, and Snow sensor provides additional data on obscurants and other atmospheric effects used in data production. More information on Maxar WorldView satellites and sensors is available within the “2020 Joint Agency Commercial Imagery Evaluation—Remote Sensing Satellite Compendium” and from the manufacturer at https://www.maxar.com/ . The Earth Resources Observation and Science Cal/Val Center of Excellence system characterization team completed data analyses to characterize the geometric (interior and exterior), radiometric, and spatial performances. Results of these analyses indicate that WorldView-3 has a range of interior geometric performance of −0.09 (−0.07 pixel) to 0.24 meter (0.19 pixel) in band-to-band registration; an exterior geometric performance in the range of a −21.10- (−2.11 pixels) to 28.23-meter (2.82 pixels) offset in comparison to Sentinel-2; a radiometric performance in the range of −0.121 to 1.420 (offset and slope); and a spatial performance in the range of 1.2 to 1.7 pixels at full width at half maximum with a modulation transfer function at a Nyquist frequency in the range of 0.093 to 0.185.