USGS ScienceSearch

Geology topics

Sherrill Beard

Publications and source records attributed to Sherrill Beard.

3 recordsLinked to original sources

Water-quality, lithologic, and water-level data for wells in Tulare Basin, Kings, Kern, and Tulare Counties, California, August 1990 to February 1993

Much of the Tulare Basin is characterized by saline shallow ground water containing elevated concen- trations of arsenic, selenium, and other trace elements. A comprehensive investigation of ground-water geochemist, and, to a limited extent, hydrology was initiated in response to concerns related to (1) adverse effects on migratory waterfowl of high concentrations of selenium in agricultural drainwater disposed of in evaporation ponds and (2) adverse effects on human health due to potential downward migration of ground water containing high concentrations of arsenic to regional aquifers used as drinking-water sources. This report presents data collected during the initial phase of this investigation. A total of 20 observation wells were installed at 5 locations in the basin. Four observation wells in a cluster were installed at each location at depths of about 20, 50, 100, and 200 feet. Water samples collected from each site were analyzed for major ions, trace elements (including arsenic and selenium), nutrients, and selected isotopes. Lithologic logs and well-construction information for each site and water-level measurements for each well measured periodically from August 1990 to February 1993 also are reported.

Open-File Report

Data for ground-water test holes in Fresno County, western San Joaquin Valley, California, June to August 1985

Twenty-four test holes were drilled from June 3 to August 29, 1985, in the western San Joaquin Valley, California, to provide information about groundwater hydraulics and geochemistry. The study area is in western Fresno County, west of the San Joaquin River, and east of the Coast Range. Lithologic, hydrologic, and geophysical data were collected from test holes drilled at two cluster sites and at 13 additional sites. Both cluster sites have five cased test holes. A sixth test hole was drilled at one of the cluster sites but was destroyed. Each of the 10 cased test holes is perforated at a different 10-ft depth interval. Six of the 13 additional test holes were also cased. Lithology logs were constructed from descriptions of cuttings and cores recovered during drilling. Geophysical logs were made of the deepest hole at each cluster site. Initial water level measurements were made at most sites. (Author 's abstract)

Open-File Report