Geology topics

Sarah E. Bergstresser

Publications and source records attributed to Sarah E. Bergstresser.

8 recordsLinked to original sources

USGS2021

Borehole sampling of surficial sediments in Northern Virginia and Southern Maryland

From 2014 to 2017, the U.S. Geological Survey’s Florence Bascom Geoscience Center (FBGC) entered into an inter-agency agreement with the Federal Highway Administration’s Turner-Fairbank Highway Research Center (TFHRC) to assist in field site selection and auger drilling fieldwork. The TFHRC was developing a device to measure the erosional properties of clay-rich sediments to be used for in situ testing at locations of bridge pier construction. FBGC scientists selected 15 drilling locations at 14 different field sites across Northern Virginia and Southern Maryland for the investigation of near-surface sediment properties and the development and testing of the TFHRC’s in situ scour testing device (ISTD). This report provides information about the project and summarizes the data collected during fieldwork including sediment descriptions of the borehole cores and the methods used during fieldwork.

Maryland, Virginia↗

USGS2020

Evaluating elevation change thresholds between structure-from-motion DEMs derived from historical aerial photos and 3DEP LiDAR data

This study created digital terrain models (DTMs) from historical aerial images using Structure from Motion (SfM) for a variety of image dates, resolutions, and photo scales. Accuracy assessments were performed on the SfM DTMs, and they were compared to the United States Geological Survey’s three-dimensional digital elevation program (3DEP) light detection and ranging (LiDAR) DTMs to evaluate geomorphic change thresholds based on vertical accuracy assessments and elevation change methodologies. The results of this study document a relationship between historical aerial photo scales and predicted vertical accuracy of the resultant DTMs. The results may be used to assess geomorphic change thresholds over multi-decadal timescales depending on spatial scale, resolution, and accuracy requirements. This study shows that if elevation changes of approximately ±1 m are to be mapped, historical aerial photography collected at 1:20,000 scale or larger would be required for comparison to contemporary LiDAR derived DTMs.

Virginia↗

USGS2020

Geomorphological mapping and anthropogenic landform change in an urbanizing watershed using structure-from-motion photogrammetry and geospatial modeling techniques

Increasing urbanization and suburban growth in cities globally has highlighted the importance of land planning using detailed geomorphologic maps that depict anthropogenic landform changes. Such mapping provides information crucial for land management, hazard identification, and the management of the challenges arising from urbanization. The development and use of quantitative and repeatable methods to map anthropogenic and natural processes are required to advance the science of urban geomorphological mapping. This study investigated the application of geospatial modeling, structure-from-motion (SfM) photogrammetric methods and DEM differencing as means of quantifying anthropogenic landform changes from archival aerial imagery. Anthropogenic landforms were incorporated into a detailed geomorphologic map in an urbanizing watershed located in the Washington, D.C. metropolitan suburb of Vienna, Virginia.

Virginia↗

USGS2020

Mapping the extent and methods of small-scale emerald mining in the Panjshir Valley, Afghanistan

Emerald mining in the Panjshir Valley, Afghanistan, has occurred for thousands of years, yet few records exist documenting the detailed spatial extent, techniques, or productivity of small-scale miners. This study proposes new methods to map and monitor the extent and changes in small-scale mining in remote and inaccessible terrain by integrating multispectral remote sensing analysis with archival geologic data and three-dimensional topographic change detection to examine emerald deposit zones and mining activity in the Panjshir Valley. Specifically, previously mapped geologic units known to host emeralds were re-analyzed using Landsat multispectral analysis to investigate the potential distribution of mining activity. Interpretation of very fine-resolution satellite imagery showed that mining activity is becoming more concentrated and transitioning from traditional tunneling methods to mechanized surface excavation. Finally, topographic change analysis of mechanized mine sites was combined with archival grade data to estimate production and consider improved recovery methods by small-scale miners.

Panjshir Valley↗

USGS2019

Impacts of Hurricane Irma on Florida Bay Islands, Everglades National Park, U.S.A.

Hurricane Irma made landfall in south Florida, USA, on September 10, 2017 as a category 4 storm. In January 2018, fieldwork was conducted on four previously (2014) sampled islands in Florida Bay, Everglades National Park to examine changes between 2014 and 2018. The objectives were to determine if the net impact of the storm was gain or loss of island landmass and/or elevation; observe and quantify impacts to mangroves; and identify distinctive sedimentary, biochemical, and/or geochemical signatures of the storm. Storm overwash deposits were measured in the field and, in general, interior island mudflats appeared to experience deposition ranging from ~ 0.5 to ~ 6.5 cm. Elevation changes were measured using real-time kinematic positioning and satellite receivers. Comparison of 2014 to 2018 elevation measurements indicates mangrove berms and transitional areas between mudflats and berms experienced erosion and loss of elevation, whereas interior mudflats gained elevation, possibly due to Hurricane Irma. Geographic information system analysis of pre- and post-storm satellite imagery indicates the western-most island, closest to the eye of the storm, lost 32 to 42% (~ 11 to 13 m) of the width of the eastern berm, and vegetated coverage was reduced 9.3% or ~ 9700 m 2 . Vegetated coverage on the eastern-most island was reduced by 1.9% or ~ 9200 m 2 . These results are compared to previous accounts of hurricane impacts and provide a baseline for examining long-term constructive and destructive aspects of hurricanes on the islands and the role of storms in resiliency of Florida Bay islands.

Florida↗

USGS2018

The Central African Republic Diamond Database—A geodatabase of archival diamond occurrences and areas of recent artisanal and small-scale diamond mining

The alluvial diamond deposits of the Central African Republic (CAR) are mined almost exclusively by way of informal artisanal and small-scale mining (ASM) methods. ASM sites range in diameter from a few meters to 30 meters or more, and are typically excavated by crews of diggers using hand tools, sieves, and jigs. CAR’s reported annual production has ranged from 300,000 to 470,000 carats over the past decade. This production is significant for CAR because it accounts for a large portion of the country’s export income and employs an estimated 60,000 to 90,000 miners nationally. Diamond production has also been linked to the violent conflict and political instability which have plagued the country for decades. The most recent conflict began in 2012 and resulted in an international embargo on the export of rough diamonds from CAR. This embargo was followed by a ceasefire and a return of peace in certain zones of the country in 2015; however, political and economic instability continues to afflict many areas of the country. International efforts to restore peace in CAR have included United Nations support as well as international technical assistance in tracking, assessing, and monitoring diamond production. In 2015, the Kimberley Process (KP) developed an operational framework allowing for legitimate exports from five subprefectures in CAR that were deemed to be compliant with KP internal controls and which were also considered to be free from systematic violence or control of armed groups. The goal of this study was to address information gaps regarding the location and extent of diamond occurrences and mining activity through the integration of geologic research with remote sensing, geographic information systems analysis, and fieldwork. Effective and efficient monitoring of diamond mining activity using satellite imagery requires detailed understanding of the geographic distribution of diamond sources and mining activities. A two-phase methodology was developed to address the knowledge gaps. The first phase consisted of the creation of a comprehensive geospatial catalogue of diamond mining and occurrence locations from archival records such as historical maps, mining reports, academic publications, and field data. Building upon this locational database, the second phase consisted of the creation of a geospatial dataset cataloguing current mining activity locations through manual interpretation of recently acquired satellite imagery. The accuracy of this second geospatial dataset was then assessed using field observations made between 2016 and 2017 by the U.S. Agency for International Development’s Property Rights and Artisanal Diamond Development II project. This report presents a two-part geodatabase: part 1 contains the locations of diamond mine sites and occurrences from archival sources, and part 2 indicates areas of current or recent mining activity. This geodatabase is unique in its temporal and spatial extent and may be used to analyze the geographic distribution of CAR’s known diamond resources, to assess the effect of recent violent conflicts and KP actions on diamond produc-tion, to provide decision makers with information regarding small-scale diamond mining, and to improve the monitoring of mining in regions of the country prone to conflict.

Open-File Report↗

USGS2017

Creating high-resolution bare-earth digital elevation models (DEMs) from stereo imagery in an area of densely vegetated deciduous forest using combinations of procedures designed for lidar point cloud filtering

For areas of the world that do not have access to lidar, fine-scale digital elevation models (DEMs) can be photogrammetrically created using globally available high-spatial resolution stereo satellite imagery. The resultant DEM is best termed a digital surface model (DSM) because it includes heights of surface features. In densely vegetated conditions, this inclusion can limit its usefulness in applications requiring a bare-earth DEM. This study explores the use of techniques designed for filtering lidar point clouds to mitigate the elevation artifacts caused by above ground features, within the context of a case study of Prince William Forest Park, Virginia, USA. The influences of land cover and leaf-on vs. leaf-off conditions are investigated, and the accuracy of the raw photogrammetric DSM extracted from leaf-on imagery was between that of a lidar bare-earth DEM and the Shuttle Radar Topography Mission DEM. Although the filtered leaf-on photogrammetric DEM retains some artifacts of the vegetation canopy and may not be useful for some applications, filtering procedures significantly improved the accuracy of the modeled terrain. The accuracy of the DSM extracted in leaf-off conditions was comparable in most areas to the lidar bare-earth DEM and filtering procedures resulted in accuracy comparable of that to the lidar DEM.

GIScience and Remote Sensing↗

USGS2017

Multi-scale 46-year remote sensing change detection of diamond mining and land cover in a conflict and post-conflict setting

The town of Tortiya was created in the rural northern region of Côte d′Ivoire in the late 1940s to house workers for a new diamond mine. Nearly three decades later, the closure of the industrial-scale diamond mine in 1975 did not diminish the importance of diamond profits to the region's economy, and resulted in the growth of artisanal and small-scale diamond mining (ASM) within the abandoned industrial-scale mining concession. In the early 2000s, the violent conflict that arose in Côte d′Ivoire highlighted the importance of ASM land use to the local economy, but also brought about international concerns that diamond profits were being used to fund the rebellion. In recent years, cashew plantations have expanded exponentially in the region, diversifying economic activity, but also creating the potential for conflict between diamond mining and agricultural land uses. As the government looks to address the future of Tortiya and this potential conflict, a detailed spatio-temporal understanding of the changes in these two land uses over time may assist in informing policymaking. Remotely sensed imagery presents an objective and detailed spatial record of land use/land cover (LULC), and change detection methods can provide quantitative insight regarding regional land cover trends. However, the vastly different scales of ASM and cashew orchards present a unique challenge to comprehensive understanding of land use change in the region. In this study, moderate-scale categories of LULC, including cashew orchards, uncultivated forest, urban space, mining/ bare, and mixed vegetation, were produced through supervised classification of Landsat multispectral imagery from 1984, 1991, 2000, 2007, and 2014. The fine-scale ASM land use was identified through manual interpretation of annually acquired high resolution satellite imagery. Corona imagery was also integrated into the study to extend the temporal duration of the remote sensing record back to the period of industrial-scale mining. These different-scale analyses were then integrated to create a record of 46 years of mining activity and land cover change in Tortiya. While similar in spatial extent, the mining/ bare class in the integrated analysis exhibits a substantially different spatial distribution than in the original classifications. This additional information regarding the locations of ASM activity in the Tortiya area is important from a policy and planning perspective. The results of this study also suggest that LULC classifications of Landsat imagery do not consistently capture areas of ASM in the Côte d′Ivoire landscape.

Remote Sensing Applications: Society and Environme↗