USGS ScienceSearch

Geology topics

S. Farid Ghahari

Publications and source records attributed to S. Farid Ghahari.

10 recordsLinked to original sources

Performance-based earthquake early warning for tall buildings

The ShakeAlert Earthquake Early Warning (EEW) system aims to issue an advance warning to residents on the West Coast of the United States seconds before the ground shaking arrives, if the expected ground shaking exceeds a certain threshold. However, residents in tall buildings may experience much greater motion due to the dynamic response of the buildings. Therefore, there is an ongoing effort to extend ShakeAlert to include the contribution of building response to provide a more accurate estimation of the expected shaking intensity for tall buildings. Currently, the supposedly ideal solution of analyzing detailed finite element models of buildings under predicted ground-motion time histories is not theoretically or practically feasible. The authors have recently investigated existing simple methods to estimate peak floor acceleration (PFA) and determined these simple formulas are not practically suitable. Instead, this article explores another approach by extending the Pacific Earthquake Engineering Research Center (PEER) performance-based earthquake engineering (PBEE) to EEW, considering that every component involved in building response prediction is uncertain in the EEW scenario. While this idea is not new and has been proposed by other researchers, it has two shortcomings: (1) the simple beam model used for response prediction is prone to modeling uncertainty, which has not been quantified, and (2) the ground motions used for probabilistic demand models are not suitable for EEW applications. In this article, we address these two issues by incorporating modeling errors into the parameters of the beam model and using a new set of ground motions, respectively. We demonstrate how this approach could practically work using data from a 52-story building in downtown Los Angeles. Using the criteria and thresholds employed by previous researchers, we show that if peak ground acceleration (PGA) is accurately estimated, this approach can predict the expected level of human comfort in tall buildings.

Earthquake Spectra

Quantifying modeling uncertainty in simplified beam models for building response prediction

The use of simple models for response prediction of building structures is preferred in earthquake engineering for risk evaluations at regional scales, as they make computational studies more feasible. The primary impediment in their gainful use presently is the lack of viable methods for quantifying (and reducing upon) the modeling errors/uncertainties they bear. This study presents a Bayesian calibration method wherein the modeling error is embedded into the parameters of the model. The method is specifically described for coupled shear-flexural beam models here, but it can be applied to any parametric surrogate model. The major benefit the method offers is the ability to consider the modeling uncertainty in the forward prediction of any degree-of-freedom or composite response regardless of the data used in calibration. The method is extensively verified using two synthetic examples. In the first example, the beam model is calibrated to represent a similar beam model but with enforced modeling errors. In the second example, the beam model is used to represent the detailed finite element model of a 52-story building. Both examples show the capability of the proposed solution to provide realistic uncertainty estimation around the mean prediction.

Structural Control and Health Monitoring

Earthquake early warning for estimating floor shaking levels of tall buildings

This article investigates methods to improve earthquake early warning (EEW) predictions of shaking levels for residents of tall buildings. In the current U.S. Geological Survey ShakeAlert EEW system, regions far from an epicenter will not receive alerts due to low predicted ground‐shaking intensities. However, residents of tall buildings in those areas may still experience significant shaking due to the acceleration amplification caused by tall buildings’ dynamic behavior, as recently experienced by residents of the 52‐story building in downtown Los Angeles (DTLA) during the 2019 M 7.1 Ridgecrest earthquake. Using more than 400 recorded response data acquired from 77 instrumented buildings in California, here we compare the Federal Emergency Management Agency (FEMA) P‐58 and American Society of Civil Engineers (ASCE) 7‐16 simplified equations for peak floor acceleration (PFA), finding that the ASCE estimation is close to the median of data recorded in large and long‐distance events, whereas the current FEMA estimation is not suitable. In the second part of this article, four instrumented tall buildings in DTLA are extensively studied, and the performance of the simplified and response spectrum (RS) methods giving both an estimation of the free‐field horizontal peak ground acceleration (PGA) and pseudospectral acceleration is evaluated. The results show that the RS method is as accurate as the response history analysis as long as the ground‐motion RS is accurate, whereas the ASCE 7‐16 prediction is conservative. However, when ground‐motion RS or PGA is estimated for DTLA using a ground‐motion model (GMM), the performance of the RS method significantly degrades due to underestimation by the GMM at long periods. The results of this study imply that a nonergodic GMM, which may give more accurate prediction in Los Angeles, could improve the results for PFA when the building’s behavior is dominated by a few long‐period fundamental modes, as is the case for the 52‐story building in DTLA.

California

Response study of the tallest California building inferred from the Mw7.1 Ridgecrest, California earthquake of 5 July 2019 and ambient motions

The newly constructed tallest building in California, the 73-story Wilshire Grand in Los Angeles, California, is designed in conformance with performance-based design procedures. The building is designed with concrete core–shear walls, three outriggers with buckling restrained braces (BRBs) located along the height, and two three-story truss-belt structural systems. The building is equipped with a 36-channel accelerometric seismic monitoring array that recorded the recent Mw7.1 Ridgecrest earthquake of 5 July 2019, as well as the Mw6.4 Ridgecrest earthquake of 4 July 2019. In this article, only the Mw7.1 event of 5 July 2019 is studied because of a larger response of the subject building during that earthquake. The earthquake records of 5 July 2019 are specifically studied to determine its dynamic characteristics and building-specific behavior. The structure exhibits torsional behavior most likely due to abrupt asymmetrical changes in the thickness and size in-plan of the core–shear walls. The translational and torsional modes during the earthquake are not closely coupled, which does not lead to a beating effect even though there is an appearance of it in the records. Available ambient records are used only to identify modal frequencies of the building and compare them with those from the Mw7.1 event of 5 July 2019. Due to the relatively low amplitude of shaking during the earthquake, the drift ratios are too small to cause any damage. It is expected that during stronger shaking levels likely to be caused by future events, these characteristics may change and the effect of BRBs can be better assessed.

California

Responses of the odd couple Carquinez, CA, suspension bridge during the Mw6.0 south Napa earthquake of August 24, 2014

The behavior of the suspension bridge in Carquinez, CA, during the M w 6.0 24 August 2014 South Napa, CA earthquake is studied. Utilizing data from an extensive array of accelerometers that recorded the earthquake-excited motions, dynamic characteristics such as modes, corresponding frequencies and damping are identified and compared with previous studies that used ambient data of the deck only plus mathematical models. Data are systematically analyzed for vertical, transverse and torsional motions of the deck, and transverse, longitudinal and torsional motions of the towers. The transverse and vertical fundamental mode frequencies of the deck are the same (0.17 Hz) due to coupling. Higher frequencies for transverse and vertical coupled modes are also the same at 0.46 Hz and 0.98 Hz. Tower translational frequencies are 0.39 Hz in the transverse direction and 0.46 Hz in the longitudinal direction, and are also coupled with those of the deck. Coupling of torsional modes of the tower and deck is also identified. A beating effect is observed, particularly for torsional motions.

California

Before and after retrofit behavior and performance of a 55-story tall building inferred from distant earthquake and ambient vibration data

A sparsely instrumented 55-story building in Osaka, Japan had recorded unprecedented, severe and long-duration long-period resonating responses during the March 11, 2011 M9.0 Tohoku earthquake that occurred at 767 km distance. Thereafter, studies of the records resulted in implementation of a significant retrofit design, comprising dampers and buckling restrained braces (BRBs). The responses of the retrofitted building were also recorded during the April 24, 2016 M7.3 Kumamoto earthquake that occurred at 478 km. The earthquake and on-demand acquired ambient response data are analyzed in this study to assess the impact of this rare, retrofitted and instrumented tall building subjected to long period strong shaking from events originating at far distances. As expected, the fundamental frequency and critical damping ratio of the building increased, albeit small, after the retrofit as compared to before the retrofit. Increase of damping percentage is a positive finding and indicates that even larger percentages may be attained under shaking stronger than the 2016 event. The records indicate that the building still experiences significant resonance, torsion, as well as a beating effect.

Osaka

An investigation of soil-structure interaction effects observed at the MIT Green Building

The soil-foundation impedance function of the MIT Green Building is identified from its response signals recorded during an earthquake. Estimation of foundation impedance functions from seismic response signals is a challenging task, because: (1) the foundation input motions (FIMs) are not directly measurable, (2) the as-built properties of the super-structure are only approximately known, and (3) the soil-foundation impedance functions are inherently frequency-dependent. In the present study, aforementioned difficulties are circumvented by using, in succession, a blind modal identification (BMID) method, a simplified Timoshenko beam model (TBM), and a parametric updating of transfer functions (TFs). First, the flexible-base modal properties of the building are identified from response signals using the BMID method. Then, a flexible-base TBM is updated using the identified modal data. Finally, the frequency-dependent soil-foundation impedance function is estimated by minimizing the discrepancy between TFs (of pairs instrumented floors) that are (1) obtained experimentally from earthquake data and (2) analytically from the updated TBM. Using the fully identified flexible-base TBM, the FIMs as well as building responses at locations without instruments can be predicted, as demonstrated in the present study.

Massachussets

Responses of a tall building with U.S. code-type instrumentation in Tokyo, Japan, to events before, during and after the Tohoku earthquake of 11 March 2011

The 11 March 2011 M 9.0 Tohoku earthquake generated long-duration shaking that propagated hundreds of kilometers from the epicenter and affected tall buildings in urban areas several hundred kilometers from the epicenter of the main shock. Recorded responses show that tall buildings were affected by long-period motions. This study presents the behavior and performance of a 37-story building in the Tsukuda area of Tokyo, Japan, as inferred from modal analyses of records retrieved for a time interval covering a few days before, during, and for several months after the main shock. The U.S. “code-type” array comprises three triaxial accelerometers deployed at three levels in the superstructure. Such a sparse array in a tall structure limits a reliable assessment, because its performance must be based on only the average drift ratios. Based on the inferred values of this parameter, the subject building was not structurally damaged.

Toyko

Responses of two tall buildings in Tokyo, Japan, before, during, and after the M9.0 Tohoku earthquake of 11 March 2011

The 11 March 2011 M 9.0 Tohoku earthquake generated significant long duration shaking that propagated hundreds of kilometers from the epicenter and affected urban areas throughout much of Honshu. Recorded responses of tall buildings at several hundred km from the epicenter of the main shock and other events show tall buildings were affected by long-period motions of events at distant sources. This study presents behavioral aspects of 29-story and 30-story neighboring buildings in the Shinjuku area of Tokyo, Japan, as inferred from records retrieved from a sparse array of accelerometers deployed in the superstructures, at ground and 100 m below the ground level over a time interval covering before, during, and after the main shock. Such long-period effects are common in several regions of Japan as well as in the United States and in other seismically active countries. Permanent shifts in fundamental frequencies are observed. Drift ratios indicate possible structural nonlinear behavior occurred during the main shock. The need to consider risks to built environments from distant sources, including those in neighboring countries, is emphasized.

Tokyo

Unusual downhole and surface free-field records near the Carquinez Strait bridges during the 24 August 2014 Mw6.0 South Napa, California earthquake

This paper reports the results of Part A of a study of the recorded strong-motion accelerations at the well-instrumented network of the two side-by-side parallel bridges over the Carquinez Strait during the 24 August 2014 (Mw6.0 ) South Napa, Calif. earthquake that occurred at 03:20:44 PDT with epicentral coordinates 38.22N, 122.31W. (http://earthquake.usgs.gov/earthquakes/eqarchives/poster/2014/20140824.php, last accessed on October 17, 2014). Both bridges and two boreholes were instrumented by the California Strong motion Instrumentation Program (CSMIP) of California Geological Survey (CGS) (Shakal et al., 2014). A comprehensive comparison of several ground motion prediction equations as they relate to recorded ground motions of the earthquake is provided by Baltay and Boatright (2015).

California