USGS Science⌕ Search

Geology topics

Rowland W. Tabor

Publications and source records attributed to Rowland W. Tabor.

15 recordsLinked to original sources
USGS2017

Lidar-revised geologic map of the Des Moines 7.5' quadrangle, King County, Washington

This map is an interpretation of a modern lidar digital elevation model combined with the geology depicted on the Geologic Map of the Des Moines 7.5' Quadrangle, King County, Washington (Booth and Waldron, 2004). Booth and Waldron described, interpreted, and located the geology on the 1:24,000-scale topographic map of the Des Moines 7.5' quadrangle. The base map that they used was originally compiled in 1943 and revised using 1990 aerial photographs; it has 25-ft contours, nominal horizontal resolution of about 40 ft (12 m), and nominal mean vertical accuracy of about 10 ft (3 m). Similar to many geologic maps, much of the geology in the Booth and Waldron (2004) map was interpreted from landforms portrayed on the topographic map. In 2001, the Puget Sound Lidar Consortium obtained a lidar-derived digital elevation model (DEM) for much of the Puget Sound area, including the entire Des Moines 7.5' quadrangle. This new DEM has a horizontal resolution of about 6 ft (2 m) and a mean vertical accuracy of about 1 ft (0.3 m). The greater resolution and accuracy of the lidar DEM compared to topography constructed from air-photo stereo models have much improved the interpretation of geology, even in this heavily developed area, especially the distribution and relative age of some surficial deposits. For a brief description of the light detection and ranging (lidar) remote sensing method and this data acquisition program, see Haugerud and others (2003).

Washington↗
USGS2015

Geologic map of the Vashon 7.5' quadrangle and selected areas, King County, Washington

This map is an interpretation of a 6-ft-resolution lidar-derived digital elevation model combined with geology by Derek B. Booth and Kathy Goetz Troost. Field work by Booth and Troost was located on the 1:24,000-scale topographic map of the Vashon and Des Moines 7.5' quadrangles that were published in 1997 and 1995, respectively. Much of the geology was interpreted from landforms portrayed on the topographic maps, supplemented by field exposures, where available. In 2001, the Puget Sound Lidar Consortium (see http://pugetsoundlidar.org/) obtained a lidar-derived digital elevation model (DEM) for Vashon Island and the Des Moines quadrangle. For a brief description of lidar and this data acquisition program, see Haugerud and others (2003). This new DEM has a horizontal resolution of 6 ft (1.83 m) and mean vertical accuracy of about 1 ft (about 0.3 m). The greater resolution and accuracy of the lidar DEM facilitated a much-improved interpretation of many aspects of the surficial geology, especially the distribution and relative age of landforms and the materials inferred to comprise them. Booth and Troost were joined by Tabor to interpret the new lidar DEM but have done no futher field work for this map. This map, the Vashon quadrangle and selected adjacent areas, encompasses most of Vashon Island, Maury Island, and Three Tree Point in the south-central Puget Sound. One small area in the Vashon quadrangle on the east side of Puget Sound is excluded from this map but included on the adjacent Seattle quadrangle (Booth and others, 2005). The map displays a wide variety of surficial geologic deposits, which reflect many geologic environments and processes. Multiple ice-sheet glaciations and intervening nonglacial intervals have constructed a complexly layered sequence of deposits that underlie both islands to a depth of more than 300 m below sea level. These deposits not only record glacial and nonglacial history but also control the flow and availability of ground water, determine the susceptibility of the slopes to landslides, and provide economic reserves of sand and gravel. The islands are surrounded by channels of Puget Sound, some as deep as the islands are high (>600 ft (~200 m)). The shorelines provide many kilometers of well-exposed coastal outcrops that reveal abundant lithologic and stratigraphic details not ordinarily displayed in the heavily vegetated Puget Lowland.

Washington↗
USGS2014

Lidar-revised geologic map of the Poverty Bay 7.5' quadrangle, King and Pierce Counties, Washington

For this map, we interpreted a 6-ft-resolution lidar digital elevation model combined with the geology depicted on the Geologic Map of the Poverty Bay 7.5' Quadrangle, King and Pierce Counties, Washington (Booth and others, 2004b). The authors of the 2004 map described, interpreted, and located the geology on the 1:24,000-scale topographic map of the Poverty Bay 7.5' quadrangle. The topographic map, published in 1997 but compiled in 1957, includes planimetry derived from 1990 imagery and 20-ft contours, nominal horizontal resolution of 40 ft (12 m), and nominal vertical accuracy of 10 ft (3 m). Similar to many surficial geologic maps, much of the geology in Booth and others (2004b) was interpreted from landforms portrayed on the topographic map. In 2003, the Puget Sound Lidar Consortium obtained a lidar-derived digital elevation model (DEM) for the Puget Sound region including all of the Poverty Bay 7.5' quadrangle. For a brief description of lidar (LIght Detection And Ranging) and this data acquisition program, see Haugerud and others (2003). This new DEM has a horizontal resolution and accuracy of 6 ft (2 m) and vertical accuracy of approximately 1 ft (0.3 m). The greater resolution and accuracy of the lidar DEM have facilitated a new interpretation of the geology, especially the distribution and relative age of some surficial deposits.

Washington↗
USGS2013

Lidar-revised geologic map of the Olalla 7.5' quadrangle, King, Kitsap, and Pierce Counties, Washington

The Olalla 7.5' quadrangle, which lies almost in the center of the Puget Lowland, displays the broad range of geologic environments typical of the region. The upland plain is fluted by the passage of the great continental ice sheet that last covered the area about 17,000 (14,000 radiocarbon) years ago. The plain is cut by channel deposits, both late glacial and postglacial in age, and it is cleaved even more deeply by one of the major arms of Puget Sound, Colvos Passage, which here separates the west coast of Vashon Island from the Kitsap Peninsula. Beneath the deposits of the last ice sheet is a complex sequence of older Quaternary-age sediments that extends about 400 m below the modern ground surface. These older sediments are best exposed along the shorelines and beach cliffs of Puget Sound, where wave action and landslides maintain relatively fresh exposures. The older sediments typically are compact, having been loaded by ice during one or more episodes of glaciation subsequent to their deposition. Locally these sediments are also cemented by iron and manganese oxides and hydroxides, a consequence of many tens or hundreds of thousands of years of weathering and groundwater movement. Our map is an interpretation of a 6-ft resolution lidar-derived digital elevation model combined with the geology depicted on the "Geologic map of the Olalla 7.5' quadrangle, King, Kitsap, and Pierce Counties, Washington," by Booth and Troost (2005), which was described, interpreted, and located on the 1953 1:24,000-scale topographic map of the Olalla 7.5-minute quadrangle. The original topographic base map, derived from 1951 aerial photographs, has 20-ft contours, nominal horizontal resolution of circa 40 ft (12 m), and nominal mean vertical accuracy of circa 13 ft (4 m). This new DEM has a horizontal resolution of 6 ft (2 m) and mean vertical accuracy circa 1 ft (0.3 m). The greater resolution and accuracy of the lidar DEM facilitated a much-improved interpretation of many aspects of the surficial geology, especially the distribution and relative age of landforms and the materials inferred to comprise them.

Washington↗
USGS2011

Lidar-revised geologic map of the Uncas 7.5' quadrangle, Clallam and Jefferson Counties, Washington

In 2000 and 2001, the Puget Sound Lidar Consortium obtained 1 pulse/m 2 lidar data for about 65 percent of the Uncas 7.5' quadrangle. For a brief description of LIDAR (LIght Detection And Ranging) and this data acquisition program, see Haugerud and others (2003). This map combines geologic interpretation (mostly by Haugerud and Tabor) of the 6-ft (2-m) lidar-derived digital elevation model (DEM) with the geology depicted on the Preliminary Geologic Map of the Uncas 7.5' Quadrangle, Clallam and Jefferson Counties, Washington, by Peter J. Haeussler and others (1999). The Uncas quadrangle in the northeastern Olympic Peninsula covers the transition from the accreted terranes of the Olympic Mountains on the west to the Tertiary and Quaternary basin fills of the Puget Lowland to the east. Elevations in the map area range from sea level at Port Discovery to 4,116 ft (1,255 m) on the flank of the Olympic Mountains to the southwest. Previous geologic mapping within and marginal to the Uncas quadrangle includes reports by Cady and others (1972), Brown and others (1960), Tabor and Cady (1978a), Yount and Gower (1991), and Yount and others (1993). Paleontologic and stratigraphic investigations by University of Washington graduate students (Allison, 1959; Thoms, 1959; Sherman, 1960; Hamlin, 1962; Spencer, 1984) also encompass parts of the Uncas quadrangle. Haeussler and Wells mapped in February 1998, following preliminary mapping by Yount and Gower in 1976 and 1979. The description of surficial map units follows Yount and others (1993) and Booth and Waldron (2004). Bedrock map units are modified from Yount and Gower (1991) and Spencer (1984). We used the geologic time scale of Gradstein and others (2005). The Uncas quadrangle lies in the forearc of the Cascadia subduction zone, about 6.25 mi (10 km) east of the Cascadia accretionary complex exposed in the core of the Olympic Mountains (Tabor and Cady, 1978b). Underthrusting of the accretionary complex beneath the forearc uplifted and tilted eastward the Coast Range basalt basement and overlying marginal basin strata, which comprise most of the rocks of the Uncas quadrangle. The Eocene submarine and subaerial tholeiitic basalt of the Crescent Formation on the Olympic Peninsula is thought to be the exposed mafic basement of the Coast Range, which was considered by Snavely and others (1968) to be an oceanic terrane accreted to the margin in Eocene time. In this interpretation, the Coast Range basalt terrane may have originated as an oceanic plateau or by oblique marginal rifting, but its subsequent emplacement history was complex (Wells and others, 1984). Babcock and others (1992) and Haeussler and others (2003) favor the interpretation that the basalts were the product of an oceanic spreading center interacting with the continental margin. Regardless of their origin, onlapping strata in southern Oregon indicate that the Coast Range basalts were attached to North America by 50 Ma; but on southern Vancouver Island, where the terrane-bounding Leech River Fault is exposed, Brandon and Vance (1992) concluded that suturing to North America occurred in the broad interval between 42 and 24 Ma. After emplacement of the Coast Range basalt terrane, the Cascadia accretionary wedge developed by frontal accretion and underplating (Tabor and Cady, 1978b; Clowes and others, 1987). Domal uplift of the part of the accretionary complex beneath the Olympic Mountains occurred after ~18 Ma (Brandon and others, 1998). Continental and alpine glaciation during Quaternary time reshaped the uplifted rocks of the Olympic Mountains.

Washington↗
USGS2011

Lidar-revised geologic map of the Wildcat Lake 7.5' quadrangle, Kitsap and Mason Counties, Washington

This map is an interpretation of a 6-ft-resolution (2-m-resolution) lidar (light detection and ranging) digital elevation model combined with the geology depicted on the Geologic Map of the Wildcat Lake 7.5' quadrangle, Kitsap and Mason Counties, Washington (Haeussler and Clark, 2000). Haeussler and Clark described, interpreted, and located the geology on the 1:24,000-scale topographic map of the Wildcat Lake 7.5' quadrangle. This map, derived from 1951 aerial photographs, has 20-ft contours, nominal horizontal resolution of approximately 40 ft (12 m), and nominal mean vertical accuracy of approximately 10 ft (3 m). Similar to many geologic maps, much of the geology in the Haeussler and Clark (2000) map-especially the distribution of surficial deposits-was interpreted from landforms portrayed on the topographic map. In 2001, the Puget Sound lidar Consortium obtained a lidar-derived digital elevation model (DEM) for Kitsap Peninsula including all of the Wildcat Lake 7.5' quadrangle. This new DEM has a horizontal resolution of 6 ft (2 m) and a mean vertical accuracy of about 1 ft (0.3 m). The greater resolution and accuracy of the lidar DEM compared to topography constructed from air photo stereo models have much improved the interpretation of geology in this heavily vegetated landscape, especially the distribution and relative age of some surficial deposits. Many contacts of surficial deposits are adapted unmodified or slightly modified from Haugerud (2009).

Washington↗
USGS2009

Geologic Map of the North Cascade Range, Washington

The North Cascade Range, commonly referred to as the North Cascades, is the northern part of the Cascade Range that stretches from northern California into British Columbia, where it merges with the Coast Mountains of British Columbia at the Fraser River. The North Cascades are generally characterized by exposure of plutonic and metamorphic rocks in contrast to the volcanic terrain to the south. The rocks of the North Cascades are more resistant to erosion, display greater relief, and show evidence of more pronounced uplift and recent glaciation. Although the total length of the North Cascade Range, extending north from Snoqualmie Pass in Washington, is about 200 mi (320 km), this compilation map at 1:200,000 scale covers only that part (~150 mi) in the United States. The compilation map is derived mostly from eight 1:100,000-scale quadrangle maps that include all of the North Cascade Range in Washington and a bit of the mostly volcanic part of the Cascade Range to the south (fig. 1, sheet 2). Overall, the area represented by this compilation is about 12,740 mi2 (33,000 km2). The superb alpine scenery of the North Cascade Range and its proximity to major population centers has led to designation of much of the area for recreational use or wilderness preservation. A major part of the map area is in North Cascade National Park. Other restricted use areas are the Alpine Lakes, Boulder River, Clearwater, Glacier Peak, Henry M. Jackson, Lake Chelan-Sawtooth, Mount Baker, Noisy-Diobsud, Norse Peak, and Pasayten Wildernesses and the Mount Baker, Lake Chelan, and Ross Lake National Recreation Areas. The valleys traversed by Washington State Highway 20 east of Ross Lake are preserved as North Cascades Scenic Highway. The map area is traversed by three major highways: U.S. Interstate 90, crossing Snoqualmie Pass; Washington State Highway 2, crossing Stevens Pass; and Washington State Highway 20, crossing Washington Pass. Major secondary roads, as well as a network of U.S. Forest Service roads and a few private roads mainly used for logging, are restricted mostly to the flanks of the range. Although much of the mountainous core is inaccessible to automobiles, numerous trails serve the foot or horse traveler.

Scientific Investigations Map↗
USGS1998

Summary terrane, mineral deposit, and metallogenic belt maps of the Russian Far East, Alaska, and the Canadian Cordillera

This report is part of a project on the major mineral deposits, metallogenesis, and tectonics of the Russian Far East, Alaska, and the Canadian Cordillera. The project is to provide critical information for collaborators and customers on bedrock geology and geophysics, tectonics, major metalliferous mineral resources, metallogenic patterns, and crustal origin and evolution of mineralizing systems for the Russian Far East, Alaska, and the Canadian Cordillera.

Open-File Report↗
USGS1994

Circum-North Pacific tectonostratigraphic terrane map

The companion tectonostratigraphic terrane and overlap assemblage of map the Circum-North Pacific presents a modern description of the major geologic and tectonic units of the region. The map illustrates both the onshore terranes and overlap volcanic assemblages of the region, and the major offshore geologic features. The map is the first collaborative compilation of the geology of the region at a scale of 1:5,000,000 by geologists of the Russian Far East, Japanese, Alaskan, Canadian, and U.S.A. Pacific Northwest. The map is designed to be a source of geologic information for all scientists interested in the region, and is designed to be used for several purposes, including regional tectonic analyses, mineral resource and metallogenic analyses (Nokleberg and others, 1993, 1994a), petroleum analyses, neotectonic analyses, and analyses of seismic hazards and volcanic hazards. This text contains an introduction, tectonic definitions, acknowledgments, descriptions of postaccretion stratified rock units, descriptions and stratigraphic columns for tectonostratigraphic terranes in onshore areas, and references for the companion map (Sheets 1 to 5). This map is the result of extensive geologic mapping and associated tectonic studies in the Russian Far East, Hokkaido Island of Japan, Alaska, the Canadian Cordillera, and the U.S.A. Pacific Northwest in the last few decades. Geologic mapping suggests that most of this region can be interpreted as a collage of fault-bounded tectonostratigraphic terranes that were accreted onto continental margins around the Circum- . orth Pacific mainly during the Mesozoic and Cenozoic (Fujita and ewberry, 1983; 1987; Parfenov, 1984, 1991; Howell, 1985; Watson and Fujita, 1985; Parfenov and Natal'in, 1984; Jones and others. 1987; Monger and Berg, 1987, Fujita and Cook. 1990; Zonenshain and others. 1990; Natal'in, 1991, 1993; Moore and others, 1992; Silberling and others, 1992; Nokleberg and others. 1992, 1993, 1994a; Parfenov and others. 1993; Plaflcer and Berg, 1994; Tabor, 1994). This map is the result of extensive geologic mapping and associated tectonic studies in the Russian Far East, Hokkaido Island of Japan, Alaska, the Canadian Cordillera, and the U.S.A. Pacific Northwest in the last few decades. Geologic mapping suggests that most of this region can be interpreted as a collage of fault-bounded tectonostratigraphic terranes that were accreted onto continental margins around the Circum- . orth Pacific mainly during the Mesozoic and Cenozoic (Fujita and ewberry, 1983; 1987; Parfenov, 1984, 1991; Howell, 1985; Watson and Fujita, 1985; Parfenov and Natal'in, 1984; Jones and others. 1987; Monger and Berg, 1987, Fujita and Cook. 1990; Zonenshain and others. 1990; Natal'in, 1991, 1993; Moore and others, 1992; Silberling and others, 1992; Nokleberg and others. 1992, 1993, 1994a; Parfenov and others. 1993; Plaflcer and Berg, 1994; Tabor, 1994). On the companion map and in the descriptions bel?w· terranes are interpreted according to inferred tectonic environments. These environments are (I) cratonai; (2) passive continental margin; (3) metamorphosed continental margin; (4) continental-margin arc; (5) island arc; (6) oceanic crust, seamount, and ophiolite; (7) accretionary wedge and subduction zone: (8) turbidite basin; and (9) metamorphic for terranes that are too highly-deformed and metamorphosed to de~ermine the original tectonic environment. For terranes with complex geologic histories, the chosen color indicates the tectonic environment most prevalent during this history of the terrane. The tectonic environments inf~rred for igneous rocks are both temporal and genetic. The temporal environments are preaccretion and postaccretion. The genetic environments are subduction-related, rift-related, and collisional (anatectic)- related. In addition to terranes, the map also depicts postaccretion units that include: (I) Cenozoic and Mesozoic overlap assemblages of sedimentary and volcanic rocks that are deposited across two or more terranes that formed generally after accretion of most terranes in the region; (2) Cenozoic and Mesozoic basinal deposits that occur within a terrane or on the craton; (3) plutonic rocks. The postaccretion igneous units are identified by age-lithologic abbreviations and by name. These overlap assemblages and basinal deposits formed mainly during sedimentation and magmatism that occurred after accretion of terranes to each other or to a continental margin. Overlap assemblages provide minimum ages on the timing of accretion of terranes. Some Cenozoic and Mesozoic overlap assemblages and basinal deposits, as well as fragments of terranes, are extensively offset by movement along postaccretion faults. In addition, in onshore areas, the map depicts major preaccretion plutonic rocks that are limited to individual terranes. and in offshore areas. the map depicts major oceanic plates,-ocean floor magnetic lineations. oceanic spreading ridges, and seamounts. The map consists of five sheets. Sheets I and 2 depict, at a scale of I :5.000.000. the tectonostratigraphic terranes. preaccretion plutonic rocks, and postaccretion Cenozoic and Mesozoic overlap sedimentary, volcanic. and plutonic assemblages, and basinal deposits for the Circum- orth Pacific including the Russian Far East, northern Hokkaido Island of Japan, Alaska. the Canadian Cordillera, part of the U.S.A. Pacific Northwest. and adjacent offshore areas. Sheet 3 provides the list of map units for Sheets I and 2. Sheet 4 is a index map showing generalized onshore terranes and overlap assemblages for onshore parts of the Circum-North Pacific at a scale of I: I 0,000,000. Sheet 4 is a guide to the more complicated onshore features depicted on Sheets I and 2. Sheet 5 is an index map showing the major geographic regions for the Circum-North Pacific. Significant differences exist between the representation of onshore and offshore geology on Sheets I and 2. These are: (I) compared to the onshore part of the map, the offshore part is depicted in a more schematic fashion because of more limited data and because the offshore terranes and early Cenozoic and older overlap assemblages generally are obscured by extensive late Cenozoic sedimentary cover that is not shown unless thicker than two kilometers; (2) marginal contacts of offshore Cenozoic and Cretaceous sedimentary basins do not match contacts of onshore Cenozoic and Cretaceous sedimentary units because offshore basins are limited to those regions with sediment thicknesses greater than two kilometers; (3) stratigraphic columns, included at the end of this explanation. are provided only for onshore terranes because the geology of offshore terranes is generally less well-known; and (4) for simplicity, the major onshore Cenozoic sedimentary basins are generally not defined and described separately because the onshore part of the map is designed to emphasize terranes and overlap volcanic assemblages that are crucial for both for tectonic and metallogenic analyses published elsewhere (Nokleberg and others, 1993, 1994a). Several key geologic sources were used in the compilation of the map. For Alaska. the basic outcrop pattern for the map is from Beikman (1980), Gehrels and Berg (1992, 1994). Barker and others ( 1994). Brew (1994), and Moli-Stalcup and others ( 1994b). The distribution of terranes is from Jones and others (1987) and Monger and Berg (1987), with modification by Grantz and other (1991 ). Worall (199 1 ), okleberg and others (1993, 1994a), the cited references, and the Alaskan co-authors of this report. For the Canadian Cordillera. the basic outcrop pattern is from Monger and Berg ( 1987), Wheeler and other (1988). and Wheeler and McFeeley ( 1991) with modifications by the Canadian authors. For the northern part of the Russian Far East. the basic outcrop pattern is from So unov (1985) with modifications by the Russian authors. For the outhern part of the Russian Far East, the basic outcrop pattern is from Krasny (1991) and Bazhanov and Oleinik ( 1986) with modification by the Russian authors. The Russian Far East part of the map is the first attempt to define and delineate terranes in that region. In their compilation. the Russian authors utilized the methodology of U.S.A. and Canadian geologists. Because this map is the first attempt to display the terranes. Cenozoic and Mesozoic overlap assemblages. basinal deposit , and plutonic belts of the Russian Far East. the Russian author will appreciate constructive sugge tions for improving the map.

Open-File Report↗
USGS1972

Geology and Mineral Resources of the Northern Part of the North Cascades National Park, Washington

The northern part of the North Cascades National Park in northern Washington is north of the Skagit River between Mount Shuksan on the West and Ross Lake on the east. The area occupies approximately 500 square miles of steep mountains and thickly forested valleys centered on the precipitous Picket Range. Old metamorphic rocks and young volcanic and sedimentary rocks are intruded by large masses of granitic rocks that together form a diverse, complicated, but well-exposed geologic section. The granitic rocks are the most abundant in the area; they intrude most of the other rocks, and they separate one suite of rocks in the eastern part of the area from a second suite in the western part. In the eastern part of the area, the oldest rocks are the Custer Gneiss of McTaggart and Thompson, a thick sequence of biotite and hornblende gneisses and schists. We have divided these rocks into three generalized units: light-colored gneiss, banded gneiss, and amphibole-rich gneiss. To the northeast of these rocks lies a metagabbro. This rock type is complex and is made up of several types of gabbro, diorite, amphibolite, ultramafic rocks, and quartz diorite that crop out along the Ross Lake fault zone. To the northeast of these rocks and also along the Ross Lake fault zone is the phyllite and schist of Ross Lake. These rocks are the highly sheared and metamorphosed equivalents of the plagioclase arkose and argillite sequence of Jurassic and Cretaceous age that is so widespread on the east side of Ross Lake. The Cretaceous Hozomeen Group of Cairnes lies along Ross Lake northeast of the phyllite and schist and consists mainly of slightly metamorphosed greenstones with subordinate chert and phyllite. The phyllite in this unit is similar to that in the underlying phyllite and schist of Ross Lake with which it appears to be interbedded. The youngest rocks in the eastern part of the area are the Skagit Volcanics a thick sequence of welded tuff-breccia with some flows and air-laid tuffs. These rocks, which are probably early Tertiary in age, overlie the Hozomeen Group and the Custer Gneiss along the Canadian border. In the western part of the area the oldest rocks are greenschist and phyllite of Mount Shuksan. These fine-grained foliated and crinkled rocks commonly contain narrow lenses or layers of quartz. They are unconformably overlain by the Chuckanut Formation in the southern part of the area. This formation, which is of Paleocene and Late Cretaceous age, is made up mainly of gently dipping plagioclase arkose with some interbedded black argillite and conglomerate. The Hannegan Volcanics overlie the Chuckanut in the northern part of the area and the greenschist and phyllite of Mount Shuksan in the central part. The Hannegan Volcanics which are of early Tertiary age, consist principally of air-laid volcanic breccias and tuffs, but also include some flows and one small porphyry stock. The Chilliwack composite batholith consists of several types of granitic rocks, which were intruded at different times in the Tertiary. The two principal rock types are granodiorite and quartz diorite, but small bodies of quartz monzonite diorite, and alaskite are found in many parts of the area. Contacts between the various rock types may be either abrupt or gradational. All rocks of the Chilliwack batholith are younger than the other rock types except the Skagit and Hannegan Volcanics, which are in part younger than rocks of the batholith. At least two periods of deformation are indicated by the tight folding of the older Custer Gneiss and the greenschist and phyllite of Mount Shuksan and the gentle folding of the younger Chuckanut Formation. At least three periods of faulting occurred, one before and two after the intrusion of the Chilliwack batholith. The two largest fault structures are the Ross Lake fault zone and a long northeast-striking fault that extends for 20 miles from Mount Shuksan down the Chilliwack Valley. The Ross Lake fault zone is pro

Washington↗
USGS1971

Origin of ridge-top depressions by large-scale creep in the Olympic Mountains, Washington

In the high mountain area of the Olympic Mountains, Washington, there are many troughlike depressions on and essentially parallel to ridge tops. The troughs are mostly developed on rocks with strong planar anisotropy: slate, sandstone, and phyllite. Similar features in Europe, Japan, and New Zealand have been variously ascribed to erosion, slow movement along deep-seated shear planes, creep, and tectonic movements. In the Olympics, many depressions parallel structure; one wall is steeply dipping rocks, the other shattered, gently dipping rocks. These depressions seem to be the gaps left between undisturbed steeply dipping rocks and beds or cleavage bent valley-ward by creep. A few troughs may be the result of slow down-slope movement along deep-seated shear planes; this is a favorite explanation of eastern European workers. The Olympic ridge-top depressions testify to the importance of gravity in the degradation of high mountains carved from weak rocks.

Washington↗