USGS Science⌕ Search

Geology topics

Robert Burruss

Publications and source records attributed to Robert Burruss.

9 recordsLinked to original sources
USGS2020

Fluorescence spectroscopy of ancient sedimentary organic matter via confocal laser scanning microscopy (CLSM)

Fluorescence spectroscopy via confocal laser scanning microscopy (CLSM) was used to analyze ancient sedimentary organic matter, including Tasmanites microfossils in Devonian shale and Gloecapsomorpha prisca ( G. prisca ) in Ordovician kukersite from North American basins. We examined fluorescence emission as a function of excitation laser wavelength, sample orientation, and with respect to location within individual organic entities and in transects across bedded organic matter. Results from spectral scans of the same field of view in Tasmanites with different laser lines showed progressive red-shift in emission maxima with longer excitation wavelengths. This result indicates steady-state Tasmanites fluorescence emission is an overlapping combination of emission from multiple fluorophore functions. Stokes shift decreased with increasing excitation wavelength, further suggesting the presence of multiple fluorophore functions with different S 1 → S 0 transition energies. This observation also indicates that at longer excitation wavelengths, less absorbed light energy is dissipated via collisional transfer than at shorter excitation wavelengths and may suggest fewer polar functions are preferentially absorbing. Confirming earlier results, emission spectra observed from high fluorescence intensity regions (fold apices) in individual Tasmanites are blue-shifted relative to emission from other locations in the same microfossil. We suggest high intensity emission is from photoselective alignment of polarized excitation with the fluorophore absorption and emission transition moment. The blue shift observed in regions of high intensity emission may be due to relative absence or realignment of polar species, e.g., bridging ether or ester functions, although variations in O abundance could not be confirmed with preliminary time-of-flight secondary ion mass spectrometry (TOF-SIMS) analysis. Tasmanites occurring in consolidated sediments are flattened from original spherical morphology and, in optical microscopy, this burial deformation results in generally parallel extinction (strain-influenced) and positive elongation. The deformation also induces fluorescence anisotropy observed as variations in emission wavelength when individual Tasmanites are measured from their long axis parallel to bedding, whereas this effect is absent in bedding-normal view. Transects from G. prisca -rich source layers into adjacent reservoir layers show decrease in fluorescence intensity and spectral red-shift (increase in full-width half-maximum with increasing red portion of the half-width). These results may suggest an increase in fluorescence quenching across the source-to-reservoir transition zone, consistent with an increase in aromaticity following petroleum expulsion and migration. These observations are supported by increasing reflectance values measured across similar micro-scale transects. Our results highlight the applicability of CLSM as a broad and under-utilized approach for the characterization of sedimentary organic matter and are discussed with perspective toward petroleum processes and thermal indices research.

International Journal of Coal Geology↗
USGS2019

Shift in the Raman symmetric stretching band of N2, CO2, and CH4 as a function of temperature, pressure, and density

The Raman spectra of pure N 2 , CO 2 , and CH 4 were analyzed over the range 10 to 500 bars and from −160°C to 200°C (N 2 ), 22°C to 350°C (CO 2 ), and −100°C to 450°C (CH 4 ). At constant temperature, Raman peak position, including the more intense CO 2 peak ( ν +), decreases (shifts to lower wave number) with increasing pressure for all three gases over the entire pressure and temperature ( PT ) range studied. At constant pressure, the peak position for CO 2 and CH 4 increases (shifts to higher wave number) with increasing temperature over the entire PT range studied. In contrast, N 2 first shows an increase in peak position with increasing temperature at constant pressure, followed by a decrease in peak position with increasing temperature. The inflection temperature at which the trend reverses for N 2 is located between 0°C and 50°C at pressures above ~50 bars and is pressure dependent. Below ~50 bars, the inflection temperature was observed as low as −120°C. The shifts in Raman peak positions with PT are related to relative density changes, which reflect changes in intermolecular attraction and repulsion. A conceptual model relating the Raman spectral properties of N 2 , CO 2 , and CH 4 to relative density (volume) changes and attractive and repulsive forces is presented here. Additionally, reduced temperature-dependent densimeters and barometers are presented for each pure component over the respective PT ranges. The Raman spectral behavior of the pure gases as a function of temperature and pressure is assessed to provide a framework for understanding the behavior of each component in multicomponent N 2 -CO 2 -CH 4 gas systems in a future study.

Journal of Raman Spectroscopy↗
USGS2015

Using ground and intact coal Samples to evaluate hydrocarbon fate during supercritical CO 2 injection into coal beds: effects of particle size and coal moisture

To investigate the potential for mobilizing organic compounds from coal beds during geologic carbon dioxide (CO 2 ) storage (sequestration), a series of solvent extractions using dichloromethane (DCM) and using supercritical CO 2 (40 °C and 10 MPa) were conducted on a set of coal samples collected from Louisiana and Ohio. The coal samples studied range in rank from lignite A to high volatile A bituminous, and were characterized using proximate, ultimate, organic petrography, and sorption isotherm analyses. Sorption isotherm analyses of gaseous CO 2 and methane show a general increase in gas storage capacity with coal rank, consistent with findings from previous studies. In the solvent extractions, both dry, ground coal samples and moist, intact core plug samples were used to evaluate effects of variations in particle size and moisture content. Samples were spiked with perdeuterated surrogate compounds prior to extraction, and extracts were analyzed via gas chromatography–mass spectrometry. The DCM extracts generally contained the highest concentrations of organic compounds, indicating the existence of additional hydrocarbons within the coal matrix that were not mobilized during supercritical CO 2 extractions. Concentrations of aliphatic and aromatic compounds measured in supercritical CO 2 extracts of core plug samples generally are lower than concentrations in corresponding extracts of dry, ground coal samples, due to differences in particle size and moisture content. Changes in the amount of extracted compounds and in surrogate recovery measured during consecutive supercritical CO 2 extractions of core plug samples appear to reflect the transition from a water-wet to a CO 2 -wet system. Changes in coal core plug mass during supercritical CO 2 extraction range from 3.4% to 14%, indicating that a substantial portion of coal moisture is retained in the low-rank coal samples. Moisture retention within core plug samples, especially in low-rank coals, appears to inhibit accessibility of supercritical CO 2 to coal matrix porosity, limiting the extent to which hydrocarbons are mobilized. Conversely, the enhanced recovery of some surrogates from core plugs relative to dry, ground coal samples might indicate that, once mobilized, supercritical CO 2 is capable of transporting these constituents through coal beds. These results underscore the need for using intact coal samples, and for better characterization of forms of water in coal, to understand fate and transport of organic compounds during supercritical CO 2 injection into coal beds.

Energy & Fuels↗
USGS2014

Raman spectroscopic characterization of CH4 density over a wide range of temperature and pressure

The positions of the CH 4 Raman ν 1 symmetric stretching bands were measured in a wide range of temperature (from −180 °C to 350 °C) and density (up to 0.45 g/cm 3 ) using high-pressure optical cell and fused silica capillary capsule. The results show that the Raman band shift is a function of both methane density and temperature; the band shifts to lower wavenumbers as the density increases and the temperature decreases. An equation representing the observed relationship among the CH 4 ν 1 band position, temperature, and density can be used to calculate the density in natural or synthetic CH 4 -bearing inclusions.

Journal of Raman Spectroscopy↗
USGS2009

CO2 storage resources, reserves, and reserve growth: Toward a methodology for integrated assessment of the storage capacity of oil and gas reservoirs and saline formations

Geologically based methodologies to assess the possible volumes of subsurface CO 2 storage must apply clear and uniform definitions of resource and reserve concepts to each assessment unit (AU). Application of the current state of knowledge of geologic, hydrologic, geochemical, and geophysical parameters (contingencies) that control storage volume and injectivity allows definition of the contingent resource (CR) of storage. The parameters known with the greatest certainty are based on observations on known traps (KTs) within the AU that produced oil, gas, and water. The aggregate volume of KTs within an AU defines the most conservation volume of contingent resource. Application of the concept of reserve growth to CR volume provides a logical path for subsequent reevaluation of the total resource as knowledge of CO 2 storage processes increases during implementation of storage projects. Increased knowledge of storage performance over time will probably allow the volume of the contingent resource of storage to grow over time, although negative growth is possible.

Energy Procedia↗
USGS2009

Determination of diffusion coefficients of hydrogen in fused silica between 296 and 523 K by Raman spectroscopy and application of fused silica capillaries in studying redox reactions

Diffusion coefficients ( D ) of hydrogen in fused silica capillaries (FSC) were determined between 296 and 523 K by Raman spectroscopy using CO 2 as an internal standard. FSC capsules (3.25 × 10 −4 m OD, 9.9 × 10 −5 m ID, and ∼0.01 m long) containing CO 2 and H 2 were prepared and the initial relative concentrations of hydrogen in these capsules were derived from the Raman peak-height ratios between H 2 (near 587 cm −1 ) and CO 2 (near 1387 cm −1 ). The sample capsules were then heated at a fixed temperature ( T ) at one atmosphere to let H 2 diffuse out of the capsule, and the changes of hydrogen concentration were monitored by Raman spectroscopy after quench. This process was repeated using different heating durations at 296 (room T ), 323, 375, 430, 473, and 523 K; the same sample capsule was used repeatedly at each temperature. The values of D (in m 2 s −1 ) in FSC were obtained by fitting the observed changes of hydrogen concentration in the FSC capsule to an equation based on Fick’s law. Our D values are in good agreement with the more recent of the two previously reported experimental data sets, and both can be represented by: ln D = - ( 16.471 ± 0.035 ) - 44589 ± 139 RT ( R 2 = 0.99991 ) "> lnD=-(16.471±0.035)-44589±139RT(R2=0.99991) where R is the gas constant (8.3145 J/mol K), T in Kelvin, and errors at 1 σ level. The slope corresponds to an activation energy of 44.59 ± 0.14 kJ/mol. The D in FSC determined at 296 K is about an order of magnitude higher than that in platinum at 723 K, indicating that FSC is a suitable membrane for hydrogen at temperature between 673 K and room temperature, and has a great potential for studying redox reactions at these temperatures, especially for systems containing organic material and/or sulphur.

Geochimica et Cosmochimica Acta↗
USGS2008

Carbon sequestration to mitigate climate change

Human activities, especially the burning of fossil fuels such as coal, oil, and gas, have caused a substantial increase in the concentration of carbon dioxide (CO2) in the atmosphere. This increase in atmospheric CO2 - from about 280 to more than 380 parts per million (ppm) over the last 250 years - is causing measurable global warming. Potential adverse impacts include sea-level rise; increased frequency and intensity of wildfires, floods, droughts, and tropical storms; changes in the amount, timing, and distribution of rain, snow, and runoff; and disturbance of coastal marine and other ecosystems. Rising atmospheric CO2 is also increasing the absorption of CO2 by seawater, causing the ocean to become more acidic, with potentially disruptive effects on marine plankton and coral reefs. Technically and economically feasible strategies are needed to mitigate the consequences of increased atmospheric CO2. The United States needs scientific information to develop ways to reduce human-caused CO2 emissions and to remove CO2 from the atmosphere.

Fact Sheet↗
USGS2007

Regional Fluid Flow and Basin Modeling in Northern Alaska

The foothills of the Brooks Range contain an enormous accumulation of zinc (Zn) in the form of zinc sulfide and barium (Ba) in the form of barite in Carboniferous shale, chert, and mudstone. Most of the resources and reserves of Zn occur in the Red Dog deposit and others in the Red Dog district; these resources and reserves surpass those of most deposits worldwide in terms of size and grade. In addition to zinc and lead sulfides (which contain silver, Ag) and barite, correlative strata host phosphate deposits. Furthermore, prolific hydrocarbon source rocks of Carboniferous and Triassic to Early Jurassic age generated considerable amounts of petroleum that may have contributed to the world-class petroleum resources of the North Slope. Deposits of Zn-Pb-Ag or barite as large as those in the Brooks Range are very rare on a global basis and, accordingly, multiple coincident favorable factors must be invoked to explain their origins. To improve our understanding of these factors and to contribute to more effective assessments of resources in sedimentary basins of northern Alaska and throughout the world, the Mineral Resources Program and the Energy Resources Program of the U.S. Geological Survey (USGS) initiated a project that was aimed at understanding the petroleum maturation and mineralization history of parts of the Brooks Range that were previously poorly characterized. The project, titled “Regional Fluid Flow and Basin Modeling in Northern Alaska,” was undertaken in collaboration with industry, academia, and other government agencies. This Circular contains papers that describe the results of the recently completed project. The studies that are highlighted in these papers have led to a better understanding of the following: The complex sedimentary facies relationships and depositional settings and the geochemistry of the sedimentary rocks that host the deposits (sections 2 and 3). The factors responsible for formation of the barite and zinc deposits (sections 4 and 5). The geochemical indicators or exploration tools that might be used to locate other large deposits of similar character in the Red Dog district and elsewhere (section 6). The isotopic compositions of barite and sulfide deposits (sections 7 and 8) The distribution and nature of phosphate and metalliferous oil shale localities (sections 9 and 10). The architecture, kinematics, and timing of the complex thrust systems that disrupted and redistributed the Carboniferous and younger rocks; these studies are necessary in order to make a realistic palinspastic reconstruction of the basin (sections 11 and 12). The nature and extent of the petroleum system sourced from Mississippian rocks (section 13).

Circular↗