USGS Science⌕ Search

Geology topics

Richard W. Saltus

Publications and source records attributed to Richard W. Saltus.

At least 19 recordsLinked to original sources
USGS2017

The Peters Hills basin, a Neogene wedge-top basin on the Broad Pass thrust fault, south-central Alaska

The Neogene Peters Hills basin is a small terrestrial basin that formed along the south flank of the Alaska Range during a time in which there was regional shortening. The formation of the Peters Hills basin is consistent with it being a wedge-top basin that formed on top of the active southeast-vergent Broad Pass thrust fault. Movement along this thrust raised a ridge of Jurassic and Cretaceous metasedimentary rocks, which then trapped behind it Miocene and Pliocene sediments that were derived from the growing Alaska Range. The presence of this thrust fault is consistent with regional structural, stratigraphic, seismicity, gravity, and aeromagnetic data. The Peters Hills basin is no longer a depocenter, but if the Broad Pass thrust remains active, it would help explain the westward decrease in Quaternary slip rate along the Denali fault system, and it may constitute a seismic hazard that could produce earthquakes in the M w 7.6–7.8 range.

Alaska↗
USGS2017

Alaska and Yukon magnetic compilation, residual total magnetic field

This map is a compilation of aeromagnetic surveys over Yukon and eastern Alaska. Aeromagnetic surveys measure the total intensity of the earth's magnetic field. The field was measured by a magnetometer aboard an aircraft flown in parallel lines spaced at 200 m to 10000 m across the map area. The magnetic field reflects magnetic properties of bedrock and provides qualitative and quantitative information used in geological mapping. Understanding the geology will help geologists map the area, assist mineral/hydrocarbon exploration activities, and provide useful information necessary for communities, aboriginal associations, and government to make land use decisions. This survey was flown to improve our knowledge of the area. It will support ongoing geological mapping and resource assessment.

Alaska, Yukon↗
USGS2016

Late Oligocene to present contractional structure in and around the Susitna basin, Alaska—Geophysical evidence and geological implications

The Cenozoic Susitna basin lies within an enigmatic lowland surrounded by the Central Alaska Range, Western Alaska Range (including the Tordrillo Mountains), and Talkeetna Mountains in south-central Alaska. Some previous interpretations show normal faults as the defining structures of the basin (e.g., Kirschner, 1994). However, analysis of new and existing geophysical data shows predominantly (Late Oligocene to present) thrust and reverse fault geometries in the region, as previously proposed by Hackett (1978). A key example is the Beluga Mountain fault where a 50-mGal gravity gradient, caused by the density transition from the igneous bedrock of Beluga Mountain to the >4-km-thick Cenozoic sedimentary section of Susitna basin, spans a horizontal distance of ∼40 km and straddles the topographic front. The location and shape of the gravity gradient preclude a normal fault geometry; instead, it is best explained by a southwest-dipping thrust fault, with its leading edge located several kilometers to the northeast of the mountain front, concealed beneath the shallow glacial and fluvial cover deposits. Similar contractional fault relationships are observed for other basin-bounding and regional faults as well. Contractional structures are consistent with a regional shortening strain field inferred from differential offsets on the Denali and Castle Mountain right-lateral strike-slip fault systems.

Alaska↗
USGS2015

Preliminary interpretation of industry two-dimensional seismic data from Susitna Basin, south-central Alaska

Located approximately 80 kilometers northwest of Anchorage, Alaska, the Susitna Basin is a complex sedimentary basin whose tectonic history has been poorly understood. Recent interpretation of two-dimensional seismic reflection data integrated with well, aeromagnetic, and gravity data provides new insights into the structural and stratigraphic nature of the basin. This report presents an interpretation of 41 two-dimensional seismic reflection lines, acquired by industry from the 1960s to the 1980s. Our interpretation of the seismic data focused mainly on picking two Eocene stratigraphic units and a presumed base of Tertiary horizon. Based on our interpretation of the seismic data, the structural features in the basin appear to be generally contractional, as evidenced by the presence of many reverse faults, thrust faults, and folds, with the contraction mainly oriented east-west. This result is contrary to prior inferences of most previous geologic studies that showed normal faults. Several regional reverse faults have been identified in the seismic data and appear to divide the basin into three regions or “sides”: east, west, and south. The eastern seismic lines show evidence of numerous short-wavelength antiforms that appear to correspond to a series of northeast-trending lineations observed in aeromagnetic data, which have been interpreted as being due to folding of Paleogene volcanic strata. The eastern side of the basin is also cut by a number of reverse faults and thrust faults, the majority of which strike north-south. The western side of the Susitna Basin is cut by a series of regional reverse faults and is characterized by synformal structures in two fault blocks between the Kahiltna River and Skwentna faults. These synforms are progressively deeper to the west in the footwalls of the east-vergent Skwentna and northeast-vergent Beluga Mountain reverse faults. Although the seismic data are limited to the south, we interpret a potential regional south-southeast-directed reverse fault striking east-northeast on the east side of the basin that may cross the entire southern portion of the basin.

Alaska↗
USGS2015

A crustal structure model of the Beaufort-Mackenzie Margin, southern Canada Basin

Canada and the United States collaborated in geophysical survey operations in the Amerasia Basin from 2007 to 2011 using the Canadian icebreaker CCGS Louis S. St. Laurent and the US icebreaker USCGC Healy. Over 15000 km of bathymetry, sub-bottom profiles, and 16-channel seismic reflection data were acquired over the Canada Basin and Alpha Ridge. Expendable sonobuoys were deployed to collect P-wave refraction and wide angle reflection data to define the regional velocity structure of the sedimentary successions. Although the new seismic profiles tie with existing GSC multichannel seismic lines on the Beaufort Shelf, water-bottom multiples obscure direct correlation of deeper stratigraphic horizons and (at best) basement is poorly imaged. We present a 2-D gravity and magnetic model for the southern Canada Basin margin and Beaufort-Mackenzie Basin integrating the new LSSL data with an existing deep crustal seismic reflection profile. The model crosses the slope region, where bathymetry shallows, base-of-sediments is deep, and basement is not imaged because of the water-bottom multiple. The density values used in the model are constrained by empirical relationships between velocity and density rock properties; however, magnetic susceptibility values are based on typical values for the inferred crustal lithologies. Velocity analyses of the new sonobuoy data provide constraints on the composition of the sediments, and enable quantitative mapping of continental, oceanic, and transitional domains within the Canada Basin. The 2-D gravity and magnetic forward model provides estimates for basement and Moho depths, the distribution and depths of magnetic sources, and visualization of the underlying crustal architecture controlling basin formation.

Conference Paper↗
USGS2015

Basement domain map of the conterminous United States and Alaska

The basement-domain map is a compilation of basement domains in the conterminous United States and Alaska designed to be used at 1:5,000,000-scale, particularly as a base layer for national-scale mineral resource assessments. Seventy-seven basement domains are represented as eighty-three polygons on the map. The domains are based on interpretations of basement composition, origin, and architecture and developed from a variety of sources. Analysis of previously published basement, lithotectonic, and terrane maps as well as models of planetary development were used to formulate the concept of basement and the methodology of defining domains that spanned the ages of Archean to present but formed through different processes. The preliminary compilations for the study areas utilized these maps, national-scale gravity and aeromagnetic data, published and limited new age and isotopic data, limited new field investigations, and conventional geologic maps. Citation of the relevant source data for compilations and the source and types of original interpretation, as derived from different types of data, are provided in supporting descriptive text and tables. The tectonic settings for crustal types represented in the basement domains are subdivided into constituent geologic environments and the types of primary metals endowments and deposits in them are documented. The compositions, architecture, and original metals endowments are potentially important to assessments of primary mineral deposits and to the residence and recycling of metals in the crust of the United States portion of the North American continent. The databases can be configured to demonstrate the construction of the United States through time, to identify specific types of crust, or to identify domains potentially containing metal endowments of specific genetic types or endowed with specific metals. The databases can also be configured to illustrate other purposes chosen by users.

Data Series↗
USGS2014

Utility of aeromagnetic studies for mapping of potentially active faults in two forearc basins: Puget Sound, Washington, and Cook Inlet, Alaska

High-resolution aeromagnetic surveys over forearc basins can detect faults and folds in weakly magnetized sediments, thus providing geologic constraints on tectonic evolution and improved understanding of seismic hazards in convergent-margin settings. Puget Sound, Washington, and Cook Inlet, Alaska, provide two case histories. In each lowland region, shallow-source magnetic anomalies are related to active folds and/or faults. Mapping these structures is critical for understanding seismic hazards that face the urban regions of Seattle, Washington, and Anchorage, Alaska. Similarities in aeromagnetic anomaly patterns and magnetic stratigraphy between the two regions suggest that we can expect the aeromagnetic method to yield useful structural information that may contribute to earth-hazard and energy resource investigations in other forearc basins.

Alaska, Washington↗
USGS2011

Assessment of undiscovered oil and gas resources of the Cook Inlet region, south-central Alaska, 2011

The U.S. Geological Survey (USGS) recently completed a new assessment of undiscovered, technically recoverable oil and gas resources in the Cook Inlet region of south-central Alaska. Using a geology-based assessment methodology, the USGS estimates that mean undiscovered volumes of nearly 600 million barrels of oil, about 19 trillion cubic feet of natural gas, and 46 million barrels of natural gas liquids remain to be found in this area.

Alaska↗
USGS2011

Location and extent of Tertiary structures in Cook Inlet Basin, Alaska, and mantle dynamics that focus deformation and subsidence

This report is a new compilation of the location and extent of folds and faults in Cook Inlet Basin, Alaska. Data sources are previously published maps, well locations, and seismic-reflection data. We also utilize interpretation of new aeromagnetic data and some proprietary seismic-reflection data. Some structures are remarkably well displayed on frequency-filtered aeromagnetic maps, which are a useful tool for constraining the length of some structures. Most anticlines in and around the basin have at least shows of oil or gas, and some structures are considered to be seismically active. The new map better displays the pattern of faulting and folding. Deformation is greatest in upper Cook Inlet, where structures are oriented slightly counterclockwise of the basin bounding faults. The north ends of these structures bend to the northeast, which gives a pattern consistent with right-transpressional deformation. Subduction of the buoyant Yakutat microplate likely caused deformation to be focused preferentially in upper Cook Inlet. The upper Cook Inlet region has both the highest degree of shortening and the deepest part of the Neogene basin. This forearc region has a long-wavelength magnetic high, a large isostatic gravity low, high conductivity in the lower mantle, low p-wave velocity ( V p ), and a high p-wave to shear-wave velocity ratio ( V p /V s ). These data suggest that fluids in the mantle wedge caused serpentinization of mafic rocks, which may, at least in part, contribute to the long-wavelength magnetic anomaly. This area lies adjacent to the subducting and buoyant Yakutat microplate slab. We suggest the buoyant Yakutat slab acts much like a squeegee to focus mantle-wedge fluid flow at the margins of the buoyant slab. Such lateral flow is consistent with observed shear-wave splitting directions. The additional fluid in the adjacent mantle wedge reduces the wedge viscosity and allows greater corner flow. This results in focused subsidence, deformation, and gravity anomalies in the forearc region.

Alaska↗
USGS2010

A deposit model for Mississippi Valley-Type lead-zinc ores

This report is a descriptive model of Mississippi Valley-Type (MVT) lead-zinc deposits that presents their geological, mineralogical and geochemical attributes and is part of an effort by the U.S. Geological Survey Mineral Resources Program to update existing models and develop new models that will be used for an upcoming national mineral resource assessment. This deposit modeling effort by the USGS is intended to supplement previously published models for use in mineral-resource and mineral-environmental assessments. Included in this report are geological, geophysical and geochemical assessment guides to assist in mineral resource estimation. The deposit attributes, including grade and tonnage of the deposits described in this report are based on a new mineral deposits data set of all known MVT deposits in the world. Mississippi Valley-Type (MVT) lead-zinc deposits are found throughout the world but the largest, and more intensely researched deposits occur in North America. The ores consist mainly of sphalerite, galena, and generally lesser amounts of iron sulfides. Silver is commonly an important commodity, whereas Cu is generally low, but is economically important in some deposits. Gangue minerals may include carbonates (dolomite, siderite, ankerite, calcite), and typically minor barite. Silicification of the host rocks (or quartz gangue) is generally minor, but may be abundant in a few deposits. The deposits have a broad range of relationships with their host rocks that includes stratabound, and discordant ores; in some deposits, stratiform and vein ore are important. The most important characteristics of MVT ore deposits are that they are hosted mainly by dolostone and limestone in platform carbonate sequences and usually located at flanks of basins, orogenic forelands, or foreland thrust belts inboard of the clastic rock-dominated passive margin sequences. They have no spatial or temporal relation to igneous rocks, which distinguishes them from skarn or other intrusive rock-related Pb-Zn ores. Abundant evidence has shown that the ore fluids were derived mainly from evaporated seawater and were driven within platform carbonates by large-scale tectonic events. MVT deposits formed mainly during the Phanerozoic with more than 80 percent of the deposits hosted in Phanerozoic rocks and less than 20 percent in Precambrian rocks. Phanerozoic-hosted MVT deposits also account for 94 percent of total MVT ore, and 93 percent of total MVT lead and zinc metal. Many MVT deposits formed during Devonian to Permian time, corresponding to a series of intense tectonic events during assimilation of Pangea. The second most important period for MVT deposit genesis was Cretaceous to Tertiary time when microplate assimilation affected the western margin of North America and Africa-Eurasia. Many subtypes or alternative classifications have been applied to MVT deposits. These alternative classifications reflect geographic and or specific geological features that some workers believe set them apart as unique (for example, Appalachian-, Alpine-, Reocin-, Irish-, Viburnum trend-types). However, we do not consider these alternative classifications or sub-types to be sufficiently different to warrant using them. This report also describes the geoenvironmental characteristic of MVT deposits. The response of MVT ores in the supergene environment is buffered by their placement in carbonate host rocks which commonly results in near-neutral associated drainage water. The geoenvironmental features and anthropogenic mining effects presented in this report illustrates this important environmental aspect of MVT deposits which separates them from other deposit types (especially coal, VHMS, Cu-porphyry, SEDEX, acid-sulfate polymetallic vein).

Scientific Investigations Report↗
USGS2008

2006 Compilation of Alaska gravity data and historical reports

Gravity anomalies provide fundamental geophysical information about Earth structure and dynamics. To increase geologic and geodynamic understanding of Alaska, the U.S. Geological Survey (USGS) has collected and processed Alaska gravity data for the past 50 years. This report introduces and describes an integrated, State-wide gravity database and provides accompanying gravity calculation tools to assist in its application. Additional information includes gravity base station descriptions and digital scans of historical USGS reports. The gravity calculation tools enable the user to reduce new gravity data in a consistent manner for combination with the existing database. This database has sufficient resolution to define the regional gravity anomalies of Alaska. Interpretation of regional gravity anomalies in parts of the State are hampered by the lack of local isostatic compensation in both southern and northern Alaska. However, when filtered appropriately, the Alaska gravity data show regional features having geologic significance. These features include gravity lows caused by low-density rocks of Cenozoic basins, flysch belts, and felsic intrusions, as well as many gravity highs associated with high-density mafic and ultramafic complexes.

Alaska↗
USGS2008

Precambrian basement structure map of the continental United States - An interpretation of geologic and aeromagnetic data

The Precambrian basement rocks of the continental United States are largely covered by younger sedimentary and volcanic rocks, and the availability of updated aeromagnetic data (NAMAG, 2002) provides a means to infer major regional basement structures and tie together the scattered, but locally abundant, geologic information. Precambrian basement structures in the continental United States have strongly influenced later Proterozoic and Phanerozoic tectonism within the continent, and there is a growing awareness of the utility of these structures in deciphering major younger tectonic and related episodes. Interest in the role of basement structures in the evolution of continents has been recently stimulated, particularly by publications of the Geological Society of London (Holdsworth and others, 1998; Holdsworth and others, 2001). These publications, as well as others, stress the importance of reactivation of basement structures in guiding the subsequent evolution of continents. Knowledge of basement structures is an important key to understanding the geology of continental interiors.

Scientific Investigations Map↗
USGS2007

Geologic Map of the Big Delta B-1 Quadrangle, East-Central Alaska

Geologic mapping and U-Pb age dating of rocks from the Big Delta B-1 quadrangle, east-central Alaska, have yielded new insights into the geology and gold mineral resource for the headwater region of the Goodpaster River, northeast of Delta, Alaska. The area lies within the Yukon-Tanana Upland and is underlain by Paleozoic and Cretaceous crystalline bedrock and contains several gold mines and prospects. The Paleozoic units include biotite gneiss, quartzite interlayered with metapelite, and amphibolite gneiss. The Paleozoic units were intruded during the Devonian by tonalitic to granitic plutons, which, as a result of regional Mesozoic metamorphism and tectonism, are now augen gneiss and biotite orthogneiss. The Mesozoic regional metamorphism and ductile deformation of the entire Yukon-Tanana Upland culminated by the Late Cretaceous (about 116 Ma) as a result of northwest-directed regional transpression along the southern margin of the North American craton. This dynamothermal episode was followed by invasion of syn- to post-tectonic granodioritic to granitic batholiths during the Late Cretaceous (about 113-107 Ma), followed by a pulse of 100-95 Ma quartz feldspar porphyry intrusions. Gold mineralization is spatially associated with various post-tectonic Late Cretaceous granitic dikes and batholiths throughout the quadrangle. A northeast-trending structural corridor, described herein as the Black Mountain tectonic zone, both controlled the emplacement of some of the Cretaceous intrusive rocks, gold deposits, and prospects, as well as formed a deep-seated crustal conduit along which a subsequent rhyolite flow-dome complex erupted during the Paleocene. Tertiary uplift and erosion resulted in the development of extensive erosional pediments. Quaternary alpine glaciation carved beautiful, broad valleys in the eastern part of the quadrangle, leaving behind terminal moraines in the headwater region of the Goodpaster river drainage. Continued Holocene to Recent deformation along the Black Mountain tectonic zone has offset Tertiary terraces, as well as Quaternary fluvial and alluvial deposits, indicating that the area has a long, complex, and ongoing tectonic history.

Scientific Investigations Map↗
USGS2007

Matching magnetic trends and patterns across the Tintina fault, Alaska and Canada--evidence for offset of about 490 kilometers: Chapter C in Recent U.S. Geological Survey studies in the Tintina Gold Province, Alaska, United States, and Yukon, Canada--results of a 5-year project

Magnetic anomaly patterns on opposite sides of the mapped Tintina fault in eastern Alaska and western Canada show an apparent offset of about 490 kilometers (km), probably of Eocene age. This estimate is compared with previous geologically based estimates of 400 to 430 km and paleomagnetically based estimates of more than 1,100 km. The apparent geophysical alignments have geologic implications that deserve further study.

Alaska;Yukon↗
USGS2007

The Black Mountain tectonic zone--a reactivated northeast-trending crustal shear zone in the Yukon-Tanana Upland of east-central Alaska: Chapter D in Recent U.S. Geological Survey studies in the Tintina Gold Province, Alaska, United States, and Yukon, Canada--results of a 5-year project

The Black Mountain tectonic zone in the YukonTanana terrane of east-central Alaska is a belt of diverse northeast-trending geologic features that can been traced across Black Mountain in the southeast corner of the Big Delta 1°×3° degree quadrangle. Geologic mapping in the larger scale B1 quadrangle of the Big Delta quadrangle, in which Black Mountain is the principal physiographic feature, has revealed a continuous zone of normal and left-lateral strikeslip high-angle faults and shear zones, some of which have late Tertiary to Quaternary displacement histories. The tectonic zone includes complexly intruded wall rocks and intermingled apophyses of the contiguous mid-Cretaceous Goodpaster and Mount Harper granodioritic plutons, mafic to intermediate composite dike swarms, precious metal mineralization, early Tertiary volcanic activity and Quaternary fault scarps. These structures define a zone as much as 6 to 13 kilometers (km) wide and more than 40 km long that can be traced diagonally across the B1 quadrangle into the adjacent Eagle 1°×3° quadrangle to the east. Recurrent activity along the tectonic zone, from at least mid-Cretaceous to Quaternary, suggests the presence of a buried, fundamental tectonic feature beneath the zone that has influenced the tectonic development of this part of the Yukon-Tanana terrane. The tectonic zone, centered on Black Mountain, lies directly above a profound northeast-trending aeromagnetic anomaly between the Denali and Tintina fault systems. The anomaly separates moderate to strongly magnetic terrane on the northwest from a huge, weakly magnetic terrane on the southeast. The tectonic zone is parallel to the similarly oriented left-lateral, strike-slip Shaw Creek fault zone 85 km to the west.

Alaska;Yukon↗
USGS2005

26 km of offset on the Lake Clark fault since late Eocene time

Aeromagnetic data over the Lake Clark Fault reveal a north-trending band of magnetic anomalies that are right-laterally offset about 26 km across the fault. The magnetic anomalies correlate spatially with a belt of dated 34-39-Ma granitic plutons. Thus, the Lake Clark Fault has had ~26 km of right-lateral offset in the past 34-39 Ma. The Castle Mountain Fault, which lies along the strike of the Lake Clark Fault to the east-northeast, must have had a similar or, possibly, greater amount of offset. We infer the presence of an additional right-lateral strike-slip fault about 35 km northwest of the Lake Clark Fault, herein named the 'Telequana Fault,' on the basis of 11 km of right-lateral offset of a north-trending band of magnetic anomalies.

Professional Paper↗