Geology topics

Renan F. da Silva

Publications and source records attributed to Renan F. da Silva.

4 recordsLinked to original sources

USGS2023

Dynamics of the wave-driven circulation in the lee of nearshore reefs

Nearshore rocky reefs with scales of order 10–100 m are common along the world's coastline and often shape wave-driven hydrodynamics and shoreline morphology in their lee. The interaction of waves with these reefs generally results in either two or four-cell mean circulation systems (2CC and 4CC, respectively), with diverging flows behind the reefs and at the shoreline in the 2CC case and flows that diverge in the lee and converge at the shoreline in the 4CC case. By applying a phase-resolving wave-flow model to conduct a detailed analysis of mean momentum balances for waves interacting with nearshore reefs, we develop an understanding of the drivers of 2CC and 4CC flow dynamics and how they vary for different reef geometries and wave and water level conditions. The 2CC or 4CC patterns were primarily driven by alongshore pressure gradients toward the exposed (nonreef fronted) or reef-fronted beach. These alongshore pressure gradients were dependent on the cross-shore setup dynamics governed by the balance between pressure (i.e., related to the setup) and radiation stress gradients, and mean bottom stresses exerted on the water column. If shoreline wave setup in the lee of the reef was less than the exposed beach, a 4CC pattern developed with convergent flow at the shoreline in the lee of the reef; otherwise, a 2CC emerged with divergent flow at the shoreline. Across the parameter space investigated, reef roughness, distance to the shoreline, and beach slope were the three parameters most likely to change the flow patterns between 2CC and 4CC.

JGR-Oceans↗

USGS2022

The influence of submerged coastal structures on nearshore flows and wave runup

Engineered and natural submerged coastal structures (e.g., submerged breakwaters and reefs) modify incident wave fields and thus can alter hydrodynamic processes adjacent to coastlines. Although submerged structures are generally assumed to promote beach protection by dissipating waves offshore and creating sheltered conditions in their lee, their interaction with waves can result in mean wave-driven circulation patterns that may either promote shoreline accretion or erosion. Here, we analyse the mean flow patterns and shoreline water levels (wave runup) in the lee of idealised impermeable submerged structures with a phase-resolved nonhydrostatic numerical model. Waves propagating over submerged structures can drive either a 2-cell mean (wave-averaged) circulation, which is characterised by diverging flows behind the structure and at the shoreline, or 4-cell circulation, with converging flows at the shoreline and diverging flows in the immediate lee of the structure. The numerical results show that the mode of circulation can be predicted with a set of relationships depending on the incoming wave heights, the structure crest level, and distance to the shoreline (or structure depth). Qualitative agreement between the mean flow and proxies for the sediment transport using an energetics approach suggest that the mean flow can be a robust proxy for inferring sediment transport patterns. For the cases considered, the submerged structures had a minimal influence on shoreline wave setup and wave runup despite the wave energy dissipation by the structures due to alongshore wave energy fluxes in the lee. Consequently, these results suggest that the coastal protection provided by the range of impermeable submerged structures we modelled is primarily due to their capacity to promote beach accretion.

Coastal Engineering↗

USGS2022

Smoothed Particle Hydrodynamics simulations of reef surf zone processes driven by plunging irregular waves

As waves interact with the slopes of coral reefs and other steep bathymetry profiles, plunging breaking usually occurs where the free surface overturns and violent water motion is triggered. Resolving these surf zone processes pose significant challenges for conventional mesh-based hydrodynamic models, due to the rapidly-deforming nature of the free surface and associated flows. Yet the accurate prediction of these surf zone hydrodynamics is critical for predicting a wide range of nearshore processes driven by wave breaking (e.g., wave dissipation and energy transfers; mean water levels and currents; and wave runup). In this study we assess the ability of the mesh-free, Lagrangian particle-based numerical modelling approach Smoothed Particle Hydrodynamics (SPH) based on DualSPHysics, to simulate the fine-scale hydrodynamic processes driven by irregular wave transformation over a fringing reef profile, by comparing results against detailed experimental observations from a physical modelling study. To greatly improve the computational efficiency, the SPH model was coupled to the mesh-based multi-layer nonhydrostatic wave-flow model SWASH. With this coupled approach, SWASH was used to efficiently simulate the evolution of non-breaking waves from the wavemaker up to the fore reef slope, with the SPH model then used to simulate the detailed hydrodynamic processes over the reef from just offshore of the breakpoint to the shoreline . The SPH model was able to accurately reproduce the complex free surface deformations during plunging breaking, the spectral evolution of waves across the reef flat (including nonlinear wave shape), the mean water levels and currents, and wave runup at the shoreline. Using the long duration simulations (>400 wave periods), the model was able to reproduce the full range of wave motions over the reef (from sea-swell to infragravity frequencies), including the increasing dominance of low frequency waves towards the shoreline and the large cross-reef standing wave motions excited by the reef geometry.

Ocean Modelling↗

USGS2021

An efficient method to calculate depth-integrated, phase-averaged momentum balances in non-hydrostatic models

Analysis of the mean (wave-averaged) momentum balance is a common approach used to explain the physical forcing driving wave set-up and mean currents in the nearshore zone. Traditionally this approach has been applied to phase-averaged models but has more recently been applied to phase-resolving models using post-processing, whereby model output is used to calculate each of the momentum terms. While phase-resolving models have the advantage of capturing the nonlinear properties of waves propagating in the nearshore (making them advantageous to enhance understanding of nearshore processes), the post-processing calculation of the momentum terms does not guarantee that the momentum balance closes. We show that this is largely due to the difficulty (or impossibility) of being consistent with the numerical approach. If the residual is of a similar magnitude as any of the relevant momentum terms (which is common with post-processing methods as we show), the analysis is largely compromised. Here we present a new method to internally calculate and extract the depth-integrated, mean momentum terms in the phase-resolving non-hydrostatic wave-flow model SWASH in a manner that is consistent with the numerical implementation. Further, we demonstrate the utility of the new method with two existing physical model studies. By being consistent with the numerical framework, the internal method calculates the momentum terms with a much lower residual at computer precision, combined with greatly reduced calculation time and output storage requirements compared to post-processing techniques. The method developed here allows the accurate evaluation of the depth-integrated, mean momentum terms of wave-driven flows while taking advantage of the more complete representation of the wave dynamics offered by phase-resolving models. Furthermore, it provides an opportunity for advances in the understanding of nearshore processes particularly at more complex sites where wave nonlinearity and energy transfers are important.

Ocean Modelling↗