Geology topics

R. Kayen

Publications and source records attributed to R. Kayen.

7 recordsLinked to original sources

USGS2013

Shear-wave velocity-based probabilistic and deterministic assessment of seismic soil liquefaction potential

Shear-wave velocity (V s ) offers a means to determine the seismic resistance of soil to liquefaction by a fundamental soil property. This paper presents the results of an 11-year international project to gather new V s site data and develop probabilistic correlations for seismic soil liquefaction occurrence. Toward that objective, shear-wave velocity test sites were identified, and measurements made for 301 new liquefaction field case histories in China, Japan, Taiwan, Greece, and the United States over a decade. The majority of these new case histories reoccupy those previously investigated by penetration testing. These new data are combined with previously published case histories to build a global catalog of 422 case histories of V s liquefaction performance. Bayesian regression and structural reliability methods facilitate a probabilistic treatment of the V s catalog for performance-based engineering applications. Where possible, uncertainties of the variables comprising both the seismic demand and the soil capacity were estimated and included in the analysis, resulting in greatly reduced overall model uncertainty relative to previous studies. The presented data set and probabilistic analysis also help resolve the ancillary issues of adjustment for soil fines content and magnitude scaling factors.

Journal of Geotechnical and Geoenvironmental Engin↗

USGS2009

Geoengineering and seismological aspects of the Niigata-Ken Chuetsu-Oki earthquake of 16 July 2007

The M6.6 Niigata-Ken Chuetsu-Oki earthquake of 16 July 2007 occurred off the west coast of Japan with a focal depth of 10 km, immediately west of Kashiwazaki City and Kariwa Village in southern Niigata Prefecture. Peak horizontal ground accelerations of 0.68 g were measured in Kashiwazaki City, as well as at the reactor floor level of the world's largest nuclear reactor, located on the coast at Kariwa Village. Liquefaction of historic and modern river deposits, aeolian dune sand, and manmade fill was widespread in the coastal region nearest the epicenter and caused ground deformations that damaged bridges, embankments, roadways, buildings, ports, railways and utilities. Landslides along the coast of southern Niigata Prefecture and in mountainous regions inland of Kashiwazaki were also widespread affecting transportation infrastructure. Liquefaction and a landslide also damaged the nuclear power plant sites. This paper, along with a companion digital map database available at http://walrus.wr.usgs.gOv/infobank/n/nii07jp/html/n-ii-07-jp.sites.kmz, describes the seismological and geo-engineering aspects of the event. ?? 2009, Earthquake Engineering Research Institute.

Earthquake Spectra↗

USGS2005

Study on evaluation methods for Rayleigh wave dispersion characteristic

The evaluation of Rayleigh wave dispersion characteristic is the key step for detecting S-wave velocity structure. By comparing the dispersion curves directly with the spectra analysis of surface waves (SASW) method, rather than comparing the S-wave velocity structure, the validity and precision of microtremor-array method (MAM) can be evaluated more objectively. The results from the China - US joint surface wave investigation in 26 sites in Tangshan, China, show that the MAM has the same precision with SASW method in 83% of the 26 sites. The MAM is valid for Rayleigh wave dispersion characteristic testing and has great application potentiality for site S-wave velocity structure detection.

Earthquake Engineering and Engineering Vibration↗

USGS2004

Near-field ground motion of the 2002 Denali fault, Alaska, earthquake recorded at pump station 10

A free-field recording of the Denali fault earthquake was obtained by the Alyeska Pipeline Service Company 3 km from the surface rupture of the Denali fault. The instrument, part of the monitoring and control system for the trans-Alaska pipeline, was located at Pump Station 10, approximately 85 km east of the epicenter. After correction for the measured instrument response, we recover a seismogram that includes a permanent displacement of 3.0 m. The recorded ground motion has relatively low peak acceleration (0.36 g) and very high peak velocity (180 cm/s). Nonlinear soil response may have reduced the peak acceleration to this 0.36 g value. Accelerations in excess of 0.1 g lasted for 10 s, with the most intense motion occurring during a 1.5-s interval when the rupture passed the site. The low acceleration and high velocity observed near the fault in this earthquake agree with observations from other recent large-magnitude earthquakes. ?? 2004, Earthquake Engineering Research Institute.

Earthquake Spectra↗

USGS2004

Geotechnical reconnaissance of the 2002 Denali fault, Alaska, earthquake

The 2002 M7.9 Denali fault earthquake resulted in 340 km of ruptures along three separate faults, causing widespread liquefaction in the fluvial deposits of the alpine valleys of the Alaska Range and eastern lowlands of the Tanana River. Areas affected by liquefaction are largely confined to Holocene alluvial deposits, man-made embankments, and backfills. Liquefaction damage, sparse surrounding the fault rupture in the western region, was abundant and severe on the eastern rivers: the Robertson, Slana, Tok, Chisana, Nabesna and Tanana Rivers. Synthetic seismograms from a kinematic source model suggest that the eastern region of the rupture zone had elevated strong-motion levels due to rupture directivity, supporting observations of elevated geotechnical damage. We use augered soil samples and shear-wave velocity profiles made with a portable apparatus for the spectral analysis of surface waves (SASW) to characterize soil properties and stiffness at liquefaction sites and three trans-Alaska pipeline pump station accelerometer locations. ?? 2004, Earthquake Engineering Research Institute.

Earthquake Spectra↗

USGS2004

Physical and geotechnical properties and assessment of sediment stability on the continental slope and basin of the Bransfield Basin (Antarctica Peninsula)

Our investigation is centred on the continental slope of the Antarctic Peninsula and adjacent basin. Type of sediments, sedimentary stratigraphy, and physical and geotechnical characterization of the sediments have been integrated. Four different types of sediments have been defined: diamictons, silty and muddy turbidites, muddy, silty and muddy matrix embedded clast contourites. There is a close correspondence between the physical properties (density, magnetic susceptibility and p-wave velocity) and the texture and/or fabric as laminations and stratification. From a quantitative point of view, only a few statistical correlations between textural and physical properties have been found. Within the geotechnical properties, only water content is most influenced by texture. This slope, with a maximum gradient observed (20??), is stable, according to the stability under gravitational loading concepts, and the maximum stable slope that would range from 22?? to 29??. Nevertheless, different instability features have been observed. Volcanic activity, bottom currents, glacial loading-unloading or earthquakes can be considered as potential mechanisms to induce instability in this area. Copyright ?? Taylor & Francis Inc.

Marine Georesources and Geotechnology↗

USGS2003

The 2002 Denali fault earthquake, Alaska: A large magnitude, slip-partitioned event

The MW (moment magnitude) 7.9 Denali fault earthquake on 3 November 2002 was associated with 340 kilometers of surface rupture and was the largest strike-slip earthquake in North America in almost 150 years. It illuminates earthquake mechanics and hazards of large strike-slip faults. It began with thrusting on the previously unrecognized Susitna Glacier fault, continued with right-slip on the Denali fault, then took a right step and continued with right-slip on the Totschunda fault. There is good correlation between geologically observed and geophysically inferred moment release. The earthquake produced unusually strong distal effects in the rupture propagation direction, including triggered seismicity.

Science↗