USGS Science⌕ Search

Geology topics

R. A. Thompson

Publications and source records attributed to R. A. Thompson.

9 recordsLinked to original sources
USGS2017

Posteruption glacier development within the crater of Mount St. Helens, Washington, USA

The cataclysmic eruption of Mount St. Helens on May 18, 1980, resulted in a large, north-facing amphitheater, with a steep headwall rising 700 m above the crater floor. In this deeply shaded niche a glacier, here named the Amphitheater glacier, has formed. Tongues of ice-containing crevasses extend from the main ice mass around both the east and the west sides of the lava dome that occupies the center of the crater floor. Aerial photographs taken in September 1996 reveal a small glacier in the southwest portion of the amphitheater containing several crevasses and a bergschrund-like feature at its head. The extent of the glacier at this time is probably about 0.1 km2. By September 2001, the debris-laden glacier had grown to about 1 km2 in area, with a maximum thickness of about 200 m, and contained an estimated 120,000,000 m3 of ice and rock debris. Approximately one-third of the volume of the glacier is thought to be rock debris derived mainly from rock avalanches from the surrounding amphitheater walls. The newly formed Amphitheater glacier is not only the largest glacier on Mount St. Helens but its aerial extent exceeds that of all other remaining glaciers combined. Published by University of Washington.

Quaternary Research↗
USGS2013

Late Miocene-Pleistocene evolution of a Rio Grande rift subbasin, Sunshine Valley-Costilla Plain, San Luis Basin, New Mexico and Colorado

The Sunshine Valley-Costilla Plain, a structural subbasin of the greater San Luis Basin of the northern Rio Grande rift, is bounded to the north and south by the San Luis Hills and the Red River fault zone, respectively. Surficial mapping, neotectonic investigations, geochronology, and geophysics demonstrate that the structural, volcanic, and geomorphic evolution of the basin involves the intermingling of climatic cycles and spatially and temporally varying tectonic activity of the Rio Grande rift system. Tectonic activity has transferred between range-bounding and intrabasin faults creating relict landforms of higher tectonic-activity rates along the mountain-piedmont junction. Pliocene–Pleistocene average long-term slip rates along the southern Sangre de Cristo fault zone range between 0.1 and 0.2 mm/year with late Pleistocene slip rates approximately half (0.06 mm/year) of the longer Quaternary slip rate. During the late Pleistocene, climatic influences have been dominant over tectonic influences on mountain-front geomorphic processes. Geomorphic evidence suggests that this once-closed subbasin was integrated into the Rio Grande prior to the integration of the once-closed northern San Luis Basin, north of the San Luis Hills, Colorado; however, deep canyon incision, north of the Red River and south of the San Luis Hills, initiated relatively coeval to the integration of the northern San Luis Basin. Long-term projections of slip rates applied to a 1.6 km basin depth defined from geophysical modeling suggests that rifting initiated within this subbasin between 20 and 10 Ma. Geologic mapping and geophysical interpretations reveal a complex network of northwest-, northeast-, and north-south–trending faults. Northwest- and northeast-trending faults show dual polarity and are crosscut by north-south– trending faults. This structural model possibly provides an analog for how some intracontinental rift structures evolve through time.

Colorado, New Mexico↗
USGS2012

Oligocene basaltic volcanism of the northern Rio Grande Rift: San Luis Hills, Colorado

The inception of the Rio Grande rift in northern New Mexico and southern Colorado was accompanied by voluminous mafic volcanism preserved in part as erosional remnants on an intrarift horst within the current axial rift graben of the San Luis Valley. Oligocene (∼26 Ma) volcanic rocks of the Hinsdale Formation at San Luis Hills range from 49 to 57 wt % SiO 2 and include nepheline and hypersthene normative lavas. A mildly alkalic series consisting of trachybasalt, basaltic trachyandesite, and trachyandesite is volumetrically dominant, olivine tholeiites are subordinate, and xenocrystic trachyandesites containing abundant quartz and plagioclase xenocrysts occur only locally. Relative to the San Luis Hills olivine tholeiites which have La/Sm n ∼ 2, the more alkaline series are enriched in light rare earth elements (LREE) and have La/Sm ratios that increase in the trachybasalt-basaltic trachyandesite suite (La/Sm n ∼ 3) to xenocrystic trachyandesites that are the most LREE enriched (La/Sm n ∼ 4). Chondrite-normalized, trace element patterns for the lavas in the San Luis Hills are similar in shape within the mildly alkaline to transitional series; they have characteristic Nb and Ta depletions and high K and Th relative to Ta, Nb, and LREE. Major and trace element constraints support a petrogenetic model of fractionation plus lower crustal assimilation for petrologic suites within the San Luis Hills rocks, although the model cannot relate lavas for the entire series to a common parent. Most mafic lavas of the San Luis Hills were evolved (Mg # <60) and contaminated by LREE-enriched silicic partial melts of granulitic lower crust depleted in Rb, Th, and U. Pb isotopes are the most sensitive indicators of crustal contamination, whereas shifts in Nd and Sr isotope ratios are associated with large amounts of assimilation. However, relatively noncontaminated lavas can be identified and indicate at least two mantle source regions were involved.

Journal of Geophysical Research↗
USGS2012

Geologic map of the southern Funeral Mountains including nearby groundwater discharge sites in Death Valley National Park, California and Nevada

This 1:50,000-scale geologic map covers the southern part of the Funeral Mountains, and adjoining parts of four structural basins—Furnace Creek, Amargosa Valley, Opera House, and central Death Valley—in California and Nevada. It extends over three full 7.5-minute quadrangles, and parts of eleven others—an area of about 1,000 square kilometers (km2). The boundaries of this map were drawn to include all of the known proximal hydrogeologic features that may affect the flow of groundwater that discharges from springs of the Furnace Creek basin, in the west-central part of the map. These springs provide the main potable water supply for Death Valley National Park. Major hydrogeologic features shown on this map include: (1) springs of the Furnace Creek basin, (2) a large Pleistocene groundwater discharge mound in the northeastern part of the map, (3) the exposed extent of limestones and dolomites that constitute the Paleozoic carbonate aquifer, and (4) the exposed extent of the alluvial conglomerates that constitute the Funeral Formation aquifer.

California;Nevada↗
USGS2005

Digital method for regional mapping of surficial basin deposits in arid regions, example from central Death Valley, Inyo County, California

Derivative maps generated from DEM's and panchromatic remote sensing data (TM Landsat 7 or SPOT) can be used to characterize surficial basin deposits in arid regions dominated by basin and range topography. Results indicate the technique is useful for rapid digital mapping of surficial deposits where a first order, systematic subdivision of bedrock, alluvial fan units, and playas is unavailable at regional scales. Digital mapping can provide information about relative age and material properties of units that in part can be derived from the position of units within the basin. This automated mapping, implemented in a GIS system, involves an iterative process applied to a combination of digital elevation models (DEM) and satellite image data, such as SPOT or the high-resolution panchromatic Band 8 of Landsat 7 scenes. The method first discriminates the region into first-order terrains consisting of bedrock mountain highlands, basin piedmonts, and playa-basin interiors based on user-defined slope cutoffs applied to DEM data. The basin areas are subsequently classified into surficial map units such as active channels, ground-water discharge zones, and multiple age alluvial-fan piedmont units based on reflective properties of the associated surfaces in the satellite imagery. The surficial units are differentiated through systematic classification based on specific user-defined ranges of spectral values for each unit. The spectral ranges used in the classification are largely dependent on the composite effects of surface characteristics and material properties, including depositional morphology and texture, pavement development, degree of surface clast varnishing, and (or) properties of exposed soils of the alluvial fan units. We have used the slope-curvature properties derived from the DEM data to discriminate the bajada areas that exhibit non-unique spectral characteristics. Slope curvature is particularly effective at differentiating young undissected surfaces from older dissected piedmont units. Available geologic maps and field observations may be used both to iteratively calibrate the spectral classification scheme and to provide additional verification of the digital map output. Digital mapping combined with detailed field studies in selected areas provides useful regional maps of surficial units until time and funding is available for more field intensive studies. In addition, anomalous areas on the thematic maps indicate where more detailed field or air photo work is warranted. The technique successfully distinguishes between bedrock, alluvial fans (generally multiple fan units), active washes, playas, playa rimming marshes and seeps and other active and inactive discharge zones in arid basin and mountain regions. Limitations occur in the subdivision of some fan units where the dominant detrital clast lithologies are not susceptible to varnish development.

California↗
USGS2002

Geologic map of the Tetilla Peak Quadrangle, Santa Fe and Sandoval counties, New Mexico

This digital geologic map summarizes all available geologic information for the Tetilla Peak quadrangle located immediately southwest of Santa Fe, New Mexico. The geologic map consists of new polygon (geologic map units) and line (contact, fault, fold axis, dike, flow contact, hachure) data, as well as point data (locations for structural measurements, geochemical and geochronologic data, geophysical soundings, and water wells). The map database has been generated at 1:24,000 scale, and provides significant new geologic information for an area of the southern Cerros del Rio volcanic field, which sits astride the boundary of the Espanola and Santo Domingo basins of the Rio Grande rift. The quadrangle includes the west part of the village of La Cienega along its eastern border and includes the southeasternmost part of the Cochiti Pueblo reservation along its northwest side. The central part of the quadrangle consists of Santa Fe National Forest and Bureau of Land Management lands, and parts of several Spanish-era land grants. Interstate 25 cuts through the southern half of the quadrangle between Santa Fe and Santo Domingo Pueblo. Canada de Santa Fe, a major river tributary to the Rio Grande, cuts through the quadrangle, but there is no dirt or paved road along the canyon bottom. A small abandoned uranium mine (the La Bajada mine) is found in the bottom of the Canada de Santa Fe about 3 km east of the La Bajada fault zone; it has been partially reclaimed. The surface geology of the Tetilla Peak quadrangle consists predominantly of a thin (1-2 m generally, locally as thick as 10? m) layer of windblown surficial deposits that has been reworked colluvially. Locally, landslide, fluvial, and pediment deposits are also important. These colluvial deposits mantle the principal bedrocks units, which are (from most to least common): (1) basalts, basanites, andesite, and trachyte of the Pliocene (2.7-2.2 Ma) Cerros del Rio volcanic field; (2) unconsolidated deposits of the Santa Fe Group, mainly along the western border, in the hanging wall of the La Bajada fault zone, but locally extending 2-3 km east under the Cerros del Rio volcanic field; (3) older Tertiary volcanic and sedimentary rocks (Abiquiu?, Espinaso, and Galisteo Formations); (4) intrusive rocks of the Cerrillos intrusive center that are roughly coeval with the Espinaso volcanic rocks; and (5) Mesozoic sedimentary rocks ranging in age from the Upper Triassic Chinle Formation to the Upper Cretaceous Mancos Shale.

New Mexico↗