USGS Science⌕ Search

Geology topics

Paul L. Weis

Publications and source records attributed to Paul L. Weis.

11 recordsLinked to original sources
USGS1972

Geology and Mineral Resources of the Northern Part of the North Cascades National Park, Washington

The northern part of the North Cascades National Park in northern Washington is north of the Skagit River between Mount Shuksan on the West and Ross Lake on the east. The area occupies approximately 500 square miles of steep mountains and thickly forested valleys centered on the precipitous Picket Range. Old metamorphic rocks and young volcanic and sedimentary rocks are intruded by large masses of granitic rocks that together form a diverse, complicated, but well-exposed geologic section. The granitic rocks are the most abundant in the area; they intrude most of the other rocks, and they separate one suite of rocks in the eastern part of the area from a second suite in the western part. In the eastern part of the area, the oldest rocks are the Custer Gneiss of McTaggart and Thompson, a thick sequence of biotite and hornblende gneisses and schists. We have divided these rocks into three generalized units: light-colored gneiss, banded gneiss, and amphibole-rich gneiss. To the northeast of these rocks lies a metagabbro. This rock type is complex and is made up of several types of gabbro, diorite, amphibolite, ultramafic rocks, and quartz diorite that crop out along the Ross Lake fault zone. To the northeast of these rocks and also along the Ross Lake fault zone is the phyllite and schist of Ross Lake. These rocks are the highly sheared and metamorphosed equivalents of the plagioclase arkose and argillite sequence of Jurassic and Cretaceous age that is so widespread on the east side of Ross Lake. The Cretaceous Hozomeen Group of Cairnes lies along Ross Lake northeast of the phyllite and schist and consists mainly of slightly metamorphosed greenstones with subordinate chert and phyllite. The phyllite in this unit is similar to that in the underlying phyllite and schist of Ross Lake with which it appears to be interbedded. The youngest rocks in the eastern part of the area are the Skagit Volcanics a thick sequence of welded tuff-breccia with some flows and air-laid tuffs. These rocks, which are probably early Tertiary in age, overlie the Hozomeen Group and the Custer Gneiss along the Canadian border. In the western part of the area the oldest rocks are greenschist and phyllite of Mount Shuksan. These fine-grained foliated and crinkled rocks commonly contain narrow lenses or layers of quartz. They are unconformably overlain by the Chuckanut Formation in the southern part of the area. This formation, which is of Paleocene and Late Cretaceous age, is made up mainly of gently dipping plagioclase arkose with some interbedded black argillite and conglomerate. The Hannegan Volcanics overlie the Chuckanut in the northern part of the area and the greenschist and phyllite of Mount Shuksan in the central part. The Hannegan Volcanics which are of early Tertiary age, consist principally of air-laid volcanic breccias and tuffs, but also include some flows and one small porphyry stock. The Chilliwack composite batholith consists of several types of granitic rocks, which were intruded at different times in the Tertiary. The two principal rock types are granodiorite and quartz diorite, but small bodies of quartz monzonite diorite, and alaskite are found in many parts of the area. Contacts between the various rock types may be either abrupt or gradational. All rocks of the Chilliwack batholith are younger than the other rock types except the Skagit and Hannegan Volcanics, which are in part younger than rocks of the batholith. At least two periods of deformation are indicated by the tight folding of the older Custer Gneiss and the greenschist and phyllite of Mount Shuksan and the gentle folding of the younger Chuckanut Formation. At least three periods of faulting occurred, one before and two after the intrusion of the Chilliwack batholith. The two largest fault structures are the Ross Lake fault zone and a long northeast-striking fault that extends for 20 miles from Mount Shuksan down the Chilliwack Valley. The Ross Lake fault zone is pro

Washington↗
USGS1960

Strategic graphite, a survey

Strategic graphite consists of certain grades of lump and flake graphite for which the United States is largely or entirely dependent on sources abroad. Lump graphite of high purity, necessary in the manufacture of carbon brushes, is imported from Ceylon, where it occurs in vein deposits. Flake graphite, obtained from deposits consisting of graphite disseminated in schists and other metamorphic rocks, is an essential ingredient of crucibles used in the nonferrous metal industries and in the manufacture of lubricants and packings. High-quality flake graphite for these uses has been obtained mostly from Madagascar since World War I. Some flake graphite of strategic grade has been produced, however, from deposits in Texas, Alabama, and Pennsylvania. The development of the carbon-bonded crucible, which does not require coarse flake, should lessen the competitive advantage of the Madagascar producers of crucible flake. Graphite of various grades has been produced intermittently in the United States since 1644. The principal domestic deposits of flake graphite are in Texas, Alabama, Pennsylvania, and New York. Reserves of flake graphite in these four States are very large, but production has been sporadic and on the whole unprofitable since World War I, owing principally to competition from producers in Madagascar. Deposits in Madagascar are large and relatively high in content of flake graphite. Production costs are low and the flake produced is of high quality. Coarseness of flake and uniformity of the graphite products marketed are cited as major advantages of Madagascar flake. In addition, the usability of Madagascar flake for various purposes has been thoroughly demonstrated, whereas the usability of domestic flake for strategic purposes is still in question. Domestic graphite deposits are of five kinds: deposits consisting of graphite disseminated in metamorphosed siliceous sediments, deposits consisting of graphite disseminated in marble, deposits formed by thermal or dynamothermal metamorphism of coal beds or other highly carbonaceous sediments, vein deposits, and contact metasomatic deposits in marble. Only the first kind comprises deposits sufficiently large and rich in flake graphite to be significant potential sources of strategic grades of graphite. Vein deposits in several localities are known, but none is known to contain substantial reserves of graphite of strategic quality. Large resources of flake graphite exist in central Texas, in northeastern Alabama, in eastern Pennsylvania, and in the eastern Adirondack Mountains of New York. Tonnages available, compared with the tonnages of flake graphite consumed annually in the United States, are very large. There have been indications that flake graphite from Texas, Alabama, and Pennsylvania can be used in clay-graphite crucibles as a substitute for Madagascar flake, and one producer has made progress in establishing markets for his flake products as ingredients of lubricants. The tonnages of various commercial grades of graphite recoverable from various domestic deposits, however, have not been established; hence, the adequacy of domestic resources of graphite in a time of emergency is not known. The only vein deposits from which significant quantities of lump graphite have been produced are those of the Crystal Graphite mine, Beaverhead County, Mont. The deposits are fracture fillings in Precambrian gneiss and pegmatite. Known reserves in the deposits are small. In Texas, numerous flake-graphite deposits occur in the Precambrian Packsaddle schist in Llano and Burnet Counties. Graphite disseminated in certain parts of this formation ranges from extremely fine to medium grained. The principal producer has been the mine of the Southwestern Graphite Co., west of the town of Burnet. Substantial reserves of medium-grained graphite are present in the deposit mined by the company. In northeastern Alabama, flake-graphite deposits occur in the Ashland mica schist in two belts that trend northeastward across Clay, Goosa, and Chilton Counties. The northeastern belt has been the most productive. About 40 mines have been operated at one time or another, but only a few have been active during or since World War I. The deposits consist of flake graphite disseminated in certain zones or "leads" consisting of quartz-mica-feldspar schists and mica quartzite. Most of past production has come from the weathered upper parts of the deposits, but unweathered rock has been mined at several localities. Reserves of weathered rock containing 3 to 5 percent graphite are very large, and reserves of unweathered rock are even greater. Flake graphite deposits in Chester County, Pa., have been worked intermittently since about 1890. The deposits consist of medium- to coarse-grained graphite disseminated in certain belts of the Pickering gneiss. The most promising deposit is one worked in the Benjamin Franklin and the Eynon Just mines. Reserves of weathered rock containing 1.5 percent graphite are of moderate size; reserves of unweathered rock are large. In the eastern Adirondack Mountains in New York there are two principal kinds of flake-graphite deposits: contact-metasomatic deposits and those consisting of flake graphite disseminated in quartz schist. The contact-metasomatic deposits are small, irregular, and very erratic in graphite content. The deposits in quartz schist are very large, persistent, and uniform in grade. There are large reserves of schist containing 3 to 5 percent graphite, but the graphite is relatively fine grained.

Bulletin↗
USGS1956

Geology of the Midnite Mine area, Spokane Indian Reservation, Stevens County, Washington

The Midnite mine is on the Spokane Indian Reservation, Stevens County, Wash. Geologic mapping and reconnaissance in the vicinity of the mine indicate metasedimentary rocks of probable Precambrian age have been intruded by two varieties of quartz monzonite of probable Cretaceous age. Porphyritic quartz monzonite underlies about three-fourths of the mapped area, and equigranular quartz monzonite underlies about one-thirtieth of the area. Metasedimentary rocks have been thermally metamorphosed in the vicinity of the intrusives. Uranium minerals are restricted to the vicinity of the contact between porphyritic quartz monzonite and schistose or spotted phyllite. The largest and richest uranium deposits are where the contact is relatively steeply dipping and highly irregular in detail. Uranium minerals are most abundant in brecciated and fractured or jointed schist but are also present along joints and grain boundaries in the adjacent quartz monzonite. Secondary uranium minerals comprise all known ore deposits; uraninite was found only in one diamond-drill core from the Midnite property. The origin of the deposits is not known, but several features suggest a hydrothermal origin.

Washington↗