Geology topics

P.W. Reiners

Publications and source records attributed to P.W. Reiners.

6 recordsLinked to original sources

USGS2011

Cooling rates and the depth of detachment faulting at oceanic core complexes: Evidence from zircon Pb/U and (U-Th)/He ages

Oceanic detachment faulting represents a distinct mode of seafloor spreading at slow spreading mid‐ocean ridges, but many questions persist about the thermal evolution and depth of faulting. We present new Pb/U and (U‐Th)/He zircon ages and combine them with magnetic anomaly ages to define the cooling histories of gabbroic crust exposed by oceanic detachment faults at three sites along the Mid‐Atlantic Ridge (Ocean Drilling Program (ODP) holes 1270D and 1275D near the 15°20′N Transform, and Atlantis Massif at 30°N). Closure temperatures for the Pb/U (∼800°C–850°C) and (U‐Th)/He (∼210°C) isotopic systems in zircon bracket acquisition of magnetic remanence, collectively providing a temperature‐time history during faulting. Results indicate cooling to ∼200°C in 0.3–0.5 Myr after zircon crystallization, recording time‐averaged cooling rates of ∼1000°C–2000°C/Myr. Assuming the footwalls were denuded along single continuous faults, differences in Pb/U and (U‐Th)/He zircon ages together with independently determined slip rates allow the distance between the ∼850°C and ∼200°C isotherms along the fault plane to be estimated. Calculated distances are 8.4 ± 4.2 km and 5.0 ± 2.1 km from holes 1275D and 1270D and 8.4 ± 1.4 km at Atlantis Massif. Estimating an initial subsurface fault dip of 50° and a depth of 1.5 km to the 200°C isotherm leads to the prediction that the ∼850°C isotherm lies ∼5–7 km below seafloor at the time of faulting. These depth estimates for active fault systems are consistent with depths of microseismicity observed beneath the hypothesized detachment fault at the TAG hydrothermal field and high‐temperature fault rocks recovered from many oceanic detachment faults.

Geochemistry, Geophysics, Geosystems↗

USGS2008

Two-phase Neogene extension in the northwestern basin and range recorded in a single thermochronology sample

We use a combination of apatite 4He/3He, (U-Th)/ He, and fission-track thermochronology to date slip on the Surprise Valley fault in northeastern California by analyzing a single sample from the Warner Range in the footwall of the fault. This sample, a granitic clast from a conglomerate, yielded a fission-track age of 11.6 ?? 2.8 Ma and a (U-Th)/He age of 3.02 ?? 0.52 Ma. Geologic relationships indicate that this sample was buried to a depth of ???3.3 km prior to exhumation during slip on the Surprise Valley fault. Fission-track age and length data indicate that the sample was fully reset (>120 ??C) prior to exhumation, which began sometime after 14 Ma. A single aliquot of nine apatite grains was step-heated for 4He/3He analysis; modeling of the resulting 4He distribution indicates that cooling from <80 ??C to ???20 ??C occurred between 3 and 1 Ma. Interconsistent time-temperature (t-T) solutions to the combined 4He/3He, (U-Th)/He, and fission-track data require two distinct periods of cooling, consistent with non-continuous slip on the Surprise Valley fault. Early cooling and fault slip took place between 14 and 8 Ma, followed by more recent fault slip ca. 3 Ma. This timing is consistent with both local geologic relationships and with the regional timing of faulting along the western margin of the Basin and Range Province. These data demonstrate the resolving power of combined fission-track, (U-Th)/He, and 4He/3He thermochronometric data to extract low-temperature t-T information from a single sample close to Earth's surface. ?? 2008 The Geological Society of America.

Geology↗

USGS2006

Cenozoic tectonic evolution of the basin and range province in northwestern Nevada

A regional synthesis of new and existing geologic and thermochronologic data document late Cretaceous - early Cenozoic regional erosion, Oligocene - Miocene volcanism, and subsequent late Miocene extension of the Basin and Range Province in northwestern Nevada and northeastern California. Across an ???220-km-wide region between the Santa Rosa and Warner Ranges, conformable sequences of 35 to 15 Ma volcanic rocks are cut by only a single generation of high-angle normal faults that accommodated ???23 km of total east-west extension (???12%). Fission-track, (U-Th)/He, geologic, and structural data from the Pine Forest Range show that faulting there began at 11 to 12 Ma, progressed at a relatively constant rate until at least 3 Ma, and has continued until near the present time. Extension in the Santa Rosa Range to the east took place during the same interval, although the post-6 Ma part of this history is less well constrained. Less complete constraints from adjacent ranges permit a similar timing for faulting, and we infer that extensional faulting in northwestern Nevada began everywhere at 12 Ma and has continued up to the present. Faulting in the Warner Range in northeastern California can only be constrained to have begun between 14 and 3 Ma, but may represent westward migration of Basin and Range extension during the Pliocene. Compared to the many parts of the Basin and Range in central and southern Nevada, extension in northwestern Nevada began more recently, is of lesser total magnitude, and was accommodated entirely by high-angle normal faults. Fission-track data document Late Cretaceous unroofing of Cretaceous (115 - 100 Ma) granitic basement rocks in northwestern Nevada, followed by a long period of relative tectonic quiescence that persisted through Oligocene and Miocene volcanism until the onset of Basin and Range extension at ???12 Ma. The low magnitude of extension (12%) and early Tertiary stability suggest that the modern ???31 km thick crust in northwestern Nevada was only slightly thicker (???35 km) prior to extension at 12 Ma, and was no thicker than ???38 km in the Late Cretaceous. This stands in contrast to other parts of the Basin and Range, where the crust was thickened to at least 45 to 50 km by Cretaceous thrusting and subsequently thinned to ???30 km by large magnitude (>50%) extension.

American Journal of Science↗

USGS2003

Origin of the Blue Ridge escarpment along the passive margin of Eastern North America

The Blue Ridge escarpment is a rugged landform situated within the ancient Appalachian orogen. While similar in some respects to the great escarpments along other passive margins, which have evolved by erosion following rifting, its youthful topographic expression has inspired proposals of Cenozoic tectonic rejuvenation in eastern North America. To better understand the post-orogenic and post-rift geomorphic evolution of passive margins, we have examined the origin of this landform using low-temperature thermochronometry and manipulation of topographic indices. Apatite (U-Th)/He and fission-track analyses along transects across the escarpment reveal a younging trend towards the coast. This pattern is consistent with other great escarpments and fits with an interpretation of having evolved by prolonged erosion, without the requirement of tectonic rejuvenation. Measured ages are also comparable specifically to those measured along other great escarpments that are as much as 100 Myr younger. This suggests that erosional mechanisms that maintain rugged escarpments in the early post-rift stages may remain active on ancient passive margins for prolonged periods. The precise erosional evolution of the escarpment is less clear, however, and several end-member models can explain the data. Our preferred model, which fits with all data, involves a significant degree of erosional escarpment retreat in the Cenozoic. Although this suggests that early onset of topographic stability is not required of passive margin evolution, more data are required to better constrain the details of the escarpment's development.

Blue Ridge escarpment↗

USGS1999

Structural and petrologic evolution of the Lihue basin and eastern Kauai, Hawaii

The topography of the eastern part of the Hawaiian island of Kauai is dominated by the Lihue basin, a large (∼110 km 2 ) semicircular depression bounded by steep cliffs and partly filled by late rejuvenated-stage (or posterosional stage) volcanic material. As with other large, semicircular basins on ocean-island volcanoes, the subsurface geology and origin (e.g., structural collapse vs. fluvial erosion) of the Lihue basin are poorly understood. New analyses of samples collected from eastern Kauai and drill holes within the basin document several important features of the late-stage geologic evolution of Kauai. First, thick (>300 m) sequences of rejuvenated-stage Koloa Volcanics in the Lihue basin show systematic, basin-wide geochemical trends of increasingly incompatible elements with time, indicating a gradual decrease in the extent of partial melting of mantle sources with time. Second, beneath the rejuvenated-stage volcanics in the basin, a thin layer of postshield alkalic stage lavas (e.g., hawaiites and mugearites) overlies older shield-stage tholeiitic lavas of the Napali Member, indicating that the Lihue basin formed by structural collapse, not fluvial erosion. Third, a large (∼2–5 km 3 ) matrix-supported breccia, interpreted as deposits of one or more debris flows, is within the rejuvenated-stage volcanics throughout the basin, and correlates with surficial exposures of the Palikea Breccia west of the basin. Isotopic compositions of the bulk breccia are similar to those of tholeiites from the east side of Kauai, and distinct from those of west Kauai tholeiites. Clasts within the breccia are dominantly hawaiite and alkali gabbro. The source region of the breccia in the steep cliffs and highlands of the central massif to the west of the basin must contain magmatic products of an extensive postshield alkalic stage, including hawaiite flows and one or more large intrusive bodies or ponded sequences of alkali gabbro.

Hawaii↗

USGS1996

Evidence for multiple mechanisms of crustal contamination of magma from compositionally zoned plutons and associated ultramafic intrusions of the Alaska Range

Models of continental crustal magmagenesis commonly invoke the interaction of mafic mantle-derived magma and continental crust to explain geochemical and petrologic characteristics of crustal volcanic and plutonic rocks. This interaction and the specific mechanisms of crustal contamination associated with it are poorly understood. An excellent opportunity to study the progressive effects of crustal contamination is offered by the composite plutons of the Alaska Range, a series of nine early Tertiary, multiply intruded, compositionally zoned (Peridotite to granite) plutons. Large initial Sr and Nd isotopic contrasts between the crustal country rock and likely parental magmas allow evaluation of the mechanisms and extents of crustal contamination that accompanied the crystallization of these ultra-mafic through granitic rocks. Three contamination processes are distinguished in these plutons. The most obvious of these is assimilation of crustal country rock concurrent with magmatic fractional crystallization (AFC), as indicated by a general trend toward crustal-like isotopic signatures with increasing differentiation. Second, many ultramafic and mafic rocks have late-stage phenocryst reaction and orthocumulate textures that suggest interaction with felsic melt. These rocks also have variable and enriched isotopic compositions that suggest that this felsic melt was isotopically enriched and probably derived from crustal country rock. Partial melt from the flysch country rock may have reacted with and contaminated these partly crystalline magmas following the precipitation and accumulation of the cumulus phenocrysts but before complete solidification of the magma. This suggests that in magmatic mush (especially of ultramafic composition) crystallizing in continental crust, a second distinct process of crustal contamination may be super imposed on AFC or magma mixing involving the main magma body. Finally, nearly all rocks, including mafic and ultramafic rocks, have ( 87 Sr/ 86 Sr) i that are too high, and ε(T) Nd that are too low, to represent the expected isotopic composition of typical depleted mantle. However, gabbro xenoliths with typical depicted-mantle isotopic compositions are found in the plutons. This situation requires either an additional enriched mantle component to provide the parental magma for these plutons, or some mechanism of crustal contamination of the parent magma that did not cause significant crystallization and differentiation of the magma to more felsic compositions. Thermodynamic modeling indicates that assimilation of alkali-and water-rich partial melt of the metapelite country rock by fractionating, near-liquidus basaltic magma could cause significant contamination while suppressing significant crystallization and differentiation.

Journal of Petrology↗