Geology topics

Norio Tenma

Publications and source records attributed to Norio Tenma.

3 recordsLinked to original sources

USGS2019

Permeability variation and anisotropy of gas hydrate-bearing pressure-core sediments recovered from the Krishna–Godavari Basin, offshore India

Permeability measurements were conducted on gas hydrate-bearing pressure-core sediments recovered from the Krishna-Godavari Basin during India's National Gas Hydrate Program Expedition 02. Pressure cores collected in the deep seabed of the Indian Ocean were cut and stored under high pressure and low temperature on the D/V Chikyu using pressure core analyzing tools. A total of 25 1.2-m storage chambers were transferred to Japan from India for pressure core studies using pressure-core analysis tools at the National Institute of Advanced Industrial Science and Technology. The sediment core's pressure and temperature were maintained within the hydrate stability conditions during the entire process of transfer and loading into a triaxial testing apparatus called TACTT, which can simulate the in-situ stress state under triaxial conditions. The hydrate saturation of the samples was in the range of 50¬90%. It was found that the initial effective water permeability was in range of 0.01 mD to tens of mD, depending on the hydrate saturation and the mean particle size of the host sediment. The hydrate pore space morphology is also a critical factor, and results suggest hydrates are forming in the pore centers, but also as a sediment grain coating. In a first for gas hydrate-bearing pressure cores, the permeability anisotropy was established via vertical and horizontal flow tests combined with a pore fluid flow simulation. The horizontal/vertical permeability ratio was found to be 4. Additionally, the effective stress dependency of permeability was investigated by performing flow tests at different effective stresses. Due to decreasing porosity and particle crushing, the permeability dropped by approximately 90% for an effective stress increase of 10 MPa.

Krishna–Godavari Basin↗

USGS2019

Pressure core based onshore laboratory analysis on mechanical properties of hydrate-bearing sediments recovered during India's National Gas Hydrate Program Expedition (NGHP) 02

A solid understanding of the mechanical properties of hydrate-bearing sediments is essential for the safe and economic development of methane hydrate as an energy resource. In 2015, 104 pressure cores were collected, recovering sediments from above and within concentrated hydrate reservoirs in the Krishna-Godavari Basin, as part of India’s National Gas Hydrate Program Expedition 02 (NGHP-02). These cores provided minimally-disturbed sediment, retained at pressures and temperatures within the hydrate stability field, for the first-ever systematic triaxial test of dozens of subsections of hydrate-bearing pressure core sediments. Post-cruise testing in Japan, evaluated multiple physical and hydro-mechanical properties. Consolidated drained and undrained triaxial compression tests, uniaxial (unconfined in effective stress) compression tests, multistage consolidation and compression tests, and alternating strain-rate compression tests were also performed. Triaxial compression test results showed an increase in the strength and stiffness, as well as the positive dilatancy, with increasing hydrate saturation, supporting previous research on laboratory-formed and natural hydrate-bearing sediments. However, some strength results in this study were low compared to prior analyses of hydrate-bearing sediments. This low strength was likely caused by the host sediment’s small particle size and loose packing, and the relatively slow applied compression strain rate. Results from uniaxial compression and multi-step compression tests confirmed that pore-space hydrates produce an apparent cohesion in hydrate-bearing sediment. More severe strength loss in sediments during the initial loading for multistage compression was also attributable to the presence of hydrates. The applicability of this multistage compression test for determining in situ properties was not confirmed, but results do provide bounds on the in situ values. Finally, from the variable strain-rate tests, it was revealed that strength in hydrate-bearing sediment has a large strain-rate dependence.

Marine and Petroleum Geology↗

USGS2019

India National Gas Hydrate Program Expedition 02 Summary of Scientific Results: Gas hydrate systems along the eastern continental margin of India

The primary objectives of the India National Gas Hydrate Program Expedition 02 (NGHP-02) were to obtain new data on the occurrence of gas hydrate systems and to advance the understanding of the controls on the formation of gas hydrate accumulations in the offshore of India. In accordance with the ultimate overall goal of the NGHP effort to assess the energy resource potential of marine gas hydrates in India, particular focus was placed on the exploration and evaluation of gas hydrate occurrences at high saturations in sand-rich systems. NGHP-02 operations were conducted from 3-March-2015 to 28-July-2015 off the eastern coast of India and included logging while drilling (LWD) operations at 25 locations, and coring and wireline logging operations at 10 locations, in the Krishna-Godavari and Mahanadi Basins. The formation of highly concentrated gas hydrate accumulations, which are more suitable for energy extraction, requires the presence of relatively coarse-grained sediments with porosity needed to support the migration and accumulation of gas, and the nucleation of gas hydrate. The results of downhole logging, coring and formation pressure testing operations during NGHP-02 have confirmed the presence of extensive sand-rich depositional systems throughout the deepwater portions of the Krishna-Godavari and Mahanadi Basins. Two areas of Krishna-Godavari Basin, referred to as Areas B and C, contain substantial gas hydrate accumulations in sand-rich systems and therefore represent ideal candidate sites for future gas hydrate production testing. This summary and technical report includes a comprehensive synthesis of the geologic, geophysical, geochemical, and physical property data acquired during NGHP-02 as it relates to the controls on gas hydrate occurrence, particularly with regards to sand-hosted accumulations. In the Mahanadi Basin, despite the confirmation of extensive reservoir capacity, gas supply at the NGHP-02 sites was insufficient to charge the reservoirs with gas hydrates. In the Krishna-Godavari Basin, extensive reservoir systems were confirmed with sediment grain-sizes ranging from coarse-silts to gravels. These reservoirs range from fully- to partially filled with gas hydrate. The gas is determined to be from only microbial sources, and in part migrated into the reservoirs from deeper systems. The controls on gas hydrate occurrence are complex and varied; and include substantial reservoir heterogeneity and sufficient permeability throughout the reservoirs and seals that allowed pervasive fluid flow into and through the hydrate-bearing systems. These discoveries are the most significant confirmation of the exploration approach that focuses on direct detection of hydrate reservoirs supported by comprehensive petroleum systems analyses.

Journal of Marine and Petroleum Geology↗