USGS ScienceSearch

Geology topics

Nicholas H. Hinz

Publications and source records attributed to Nicholas H. Hinz.

9 recordsLinked to original sources

Three-dimensional geologic map of the Brady geothermal area, Nevada

The three-dimensional (3D) geologic map characterizes the subsurface in the Brady geothermal area in the northern Hot Springs Mountains of northwestern Nevada. We built the 3D map by integrating the results from detailed geologic mapping, seismic-reflection, potential-field-geophysical, and lithologic well-logging investigations completed in the study area. This effort was undertaken to investigate the geologic structure in the geothermal field and geologic controls on hydrothermal circulation. This characterization of the controls on hydrothermal circulation is applicable to the assessment, exploration, and development of analogous geothermal resources. The 3D map area is 4 kilometers (km) wide along the west-northwest-to-east-southeast axis and 6 km wide along the north-northeast-to-south-southwest axis and extends to 1.0 km below sea level, approximately 2.5 km below the land surface. We describe the geologic units and structures in the map area, discuss the methods used to integrate the geologic and geophysical information into the 3D geologic interpretation, and calculate several geologic factors that may aid in our understanding of hydrothermal circulation. Map sheet 1 provides horizontal and vertical section views and oblique perspective views from several angles of the 3D geologic map. Map sheet 2 provides views of derivative calculations based on the 3D geologic data, 3D density of faults, 3D density of fault intersections and terminations, slip tendency on 3D faults, and dilation tendency on 3D faults. We provide digital data for all elements of the map, such as individual 3D fault and stratigraphic surfaces, 3D fault density, 3D fault intersection density, 3D slip tendency on fault surfaces, and 3D dilation tendency on fault surfaces. A brief movie displaying the 3D map is available at https://doi.org/10.3133/sim3469 .

Nevada

Three-dimensional geologic map of the southern Carson Sink, Nevada, including the Fallon FORGE area

The three-dimensional (3–D) geologic map characterizes the subsurface in the southern Carson Sink region. We created the 3–D map by integrating the results from seismic-reflection, potential-field-geophysical, and lithologic well-logging inves­tigations completed in and around the Fallon FORGE site as part of the U.S. Department of Energy Frontier Observatory for Research in Geothermal Energy (FORGE) initiative from 2015–2018. The FORGE initiative was part of an effort to develop the technologies, techniques, and knowledge needed to make enhanced geothermal systems a commercially viable electricity-generation option for the United States. Geo­logic units and structures mapped during the Fallon FORGE study, which particularly focused on the Mesozoic basement, were extrapolated to create the 3–D map of the southern Carson Sink area. The 3–D map area is 10 km wide along the east-west and north-south axes and extends 2.5 km below sea level, ~3.7 km below the land surface. Views of the map include horizontal and vertical sections and oblique perspective views from several angles. We describe the geologic units and structures and dis­cuss the methods used to integrate the geologic and geophysical information in a 3–D geologic interpretation. We provide digital data for elements of the map, such as individual 3–D fault and stratigraphic surfaces and surface-fault traces. Input data are available from various data repositories through cited web links. A brief movie displaying the 3–D map is available at https://doi.org/10.3133/sim3437 .

Nevada

Three-dimensional geologic mapping to assess geothermal potential: Examples from Nevada and Oregon

Geologic structure plays an important role in controlling fluid flow in geothermal systems. In particular, very complex structural settings, consisting of many closely spaced and intersecting faults, host many geothermal systems. To elucidate the key geologic factors that affect fault-controlled geothermal circulation, it is critical to precisely characterize the structural and stratigraphic geometries in these complex settings. Here, we present a methodology and the results of 3D geologic analyses of two geothermal systems in the Basin and Range, USA. This methodology is a quantitative and geologically focused technique that can be used to precisely characterize geothermal areas, in a time when future geothermal growth demands increased exploration precision and efficiency. Surficial and subsurface geologic and geophysical data are synthesized in the construction of detailed 3D geologic maps of geothermal areas. Based on these 3D geologic maps, we examine several geologic attributes that control permeability development and geothermal fluid flow along faults. We use the stress state of faults and the distribution of structural discontinuities (i.e., fault intersections and fault terminations) to identify locations of upflow along faults in these geothermal systems. These results and the methodology presented herein are directly applicable to structurally controlled geothermal fields in the Basin and Range and worldwide. As development focus shifts toward blind geothermal resources, integration of precisely characterized subsurface structural information into exploration methods will be increasingly critical to continued growth in geothermal exploration and development.

Nevada, Oregon

Discovering blind geothermal systems in the Great Basin Region: An integrated geologic and geophysical approach for establishing geothermal play fairways: All phases

Most geothermal resources in the Great Basin region of the western USA are blind, and thus the discovery of new commercial-grade systems requires synthesis of favorable characteristics for geothermal activity. The geothermal play fairway concept involves integration of multiple parameters indicative of geothermal activity to identify promising areas for new development. This project integrated multiple datasets to apply the play fairway concept and assess geothermal potential in a large region of the Great Basin in Nevada. It is therefore referred to as the Nevada play fairway project. This project was a strong collaborative effort between several organizations, led by the Nevada Bureau of Mines and Geology at the University of Nevada, Reno, but with key support from the U.S. Geological Survey, ATLAS Geosciences, Inc,, Hi-Q Geophysical, Inc., Lawrence Berkeley National Laboratory, Utah Geological Survey, and Innovative Geothermal Ltd. In Budget Period 1 of this project, available data for nine geologic, geochemical, and geophysical parameters were initially synthesized to produce a new detailed geothermal potential map of 96,000 km2 from west-central to eastern Nevada (Figure 1). These parameters were grouped into subsets and individually weighted (Figure 2) to delineate rankings for local permeability, intermediate permeability, regional permeability, and thermal potential, which collectively defined geothermal play fairways (i.e., most likely locations for significant geothermal fluid flow). This initial work was aimed at reducing the risks in regional exploration and therefore facilitating discovery of new commercial-grade systems in blind settings, as well as in areas with surface expressions of geothermal activity. Budget Period 2 of the project involved detailed analysis of some of the most promising areas identified in Phase 1. Twenty-four highly prospective areas, including both known undeveloped systems and previously undiscovered potential blind systems, were identified for further analysis (Figures 3 and 4). After reconnaissance of these areas, five of the most promising sites were selected for detailed studies. Multiple techniques were employed in the detailed studies, including geologic mapping, shallow temperature surveys, gravity surveys, Lidar, geochemical studies, seismic reflection analysis, and 3D modeling. The goal of the detailed studies was to identify specific areas with the highest likelihood for high permeability and thermal fluids, such that drill sites could be targeted. Three main sets of predictive maps were generated for each detailed study area: 1) play fairway maps, 2) play fairway error maps, and 3) direct evidence maps. Local- and intermediate-scale permeability models were revised to reflect results of the detailed geologic, geophysical, and geochemical analyses. Budget Period 3 of the project involved more detailed geophysical analyses and temperature-gradient (TG) drilling in southeastern Gabbs Valley and northern Granite Springs Valley (Figure 4), deemed the two most promising sites, with the goal of providing preliminary validation of the play fairway methodology. In southeastern Gabbs Valley, the collocation of a favorable structural setting (displacement transfer zone and fault intersections), Quaternary faults, intersecting and terminating gravity gradients, magnetic low, shallow (2 m) temperature anomaly, low resistivity anomaly, and promising geothermometry from nearby water wells provided evidence for a blind system. Drilling of six TG holes defines an apparent geothermal system at this locality with temperatures as high as 124°C at 152 m. This system is blind, with no surface hot springs, fumaroles, or paleo-geothermal deposits. For northern Granite Springs Valley, a favorable structural setting (termination of a major Quaternary normal fault), terminating gravity gradient, magnetic gradient, newly discovered sinter deposits, nearby warm water wells, previously drilled TG holes in the vicinity, and promising geothermometry suggest a hidden system. Drilling of six new TG holes yields temperatures of ~96°C at ~250 m, suggesting the presence of a geothermal system. Major lessons learned in the course of this project include: 1) initially identified sites commonly include multiple favorable structural settings at a finer scale; 2) promising sites in Cenozoic basins cannot be recognized without detailed geophysical surveys; and 3) play fairway analysis should be refined as the exploration program vectors into the most promising sites and finer-scale data are acquired. In addition to producing copious amounts of data, this project resulted in 16 published papers, 10 abstracts, more than 40 presentations across the U.S. and abroad (including several keynote addresses), 2 Masters theses, and 7 media reports.

Nevada

Stress concentrations at structural discontinuities in active fault zones in the western United States: Implications for permeability and fluid flow in geothermal fields

Slip can induce concentration of stresses at discontinuities along fault systems. These structural discontinuities, i.e., fault terminations, fault step-overs, intersections, bends, and other fault interaction areas, are known to host fluid flow in ore deposition systems, oil and gas reservoirs, and geothermal systems. We modeled stress transfer associated with slip on faults with Holocene-to-historic slip histories at the Salt Wells and Bradys geothermal systems in western Nevada, United States. Results show discrete locations of stress perturbation within discontinuities along these fault systems. Well field data, surface geothermal manifestations, and subsurface temperature data, each a proxy for modern fluid circulation in the fields, indicate that geothermal fluid flow is focused in these same areas where stresses are most highly perturbed. These results suggest that submeter- to meter-scale slip on these fault systems generates stress perturbations that are sufficiently large to promote slip on an array of secondary structures spanning the footprint of the modern geothermal activity. Slip on these secondary faults and fractures generates permeability through kinematic deformation and allows for transmission of fluids. Still, mineralization is expected to seal permeability along faults and fractures over time scales that are generally shorter than either earthquake recurrence intervals or the estimated life span of geothermal fields. This suggests that though stress perturbations resulting from fault slip are broadly important for defining the location and spatial extent of enhanced permeability at structural discontinuities, continual generation and maintenance of flow conduits throughout these areas are probably dependent on the deformation mechanism(s) affecting individual structures.

GSA Bulletin

Discovery of a blind geothermal system in Southern Gabbs Valley, western Nevada, through application of the play fairway analysis at multiple scales

The Great Basin region is capable of generating much greater amounts of geothermal energy than currently produced. Most geothermal resources in this region are blind, and thus favorable characteristics for geothermal activity must be synthesized and methodologies developed to discover new commercial-grade systems. The geothermal play fairway concept involves integration of multiple parameters indicative of geothermal activity to identify promising areas for new development. In the Nevada play fairway project, geologic, geochemical, and geophysical parameters were initially synthesized to produce a new geothermal potential map of 96,000 km2. Southern Gabbs Valley in western Nevada is a particularly promising site selected for detailed study. It contains favorable structural settings, including Quaternary fault intersections and a displacement transfer zone. Geologic, geophysical, and geochemical techniques were employed to define the most likely sites for high permeability and select targets for temperature-gradient holes. Permeability models were revised to reflect results of detailed analyses and generate new detailed play fairway maps. The most promising site lies in an area of multiple fault intersections in a broader displacement transfer zone directly north of the Petrified Springs dextral fault, as revealed by gravity, magnetic, and MT data. A 2-m temperature anomaly and warm temperature gradient wells (~120oC at ~150 m depth) confirm the presence of a geothermal system and provide initial validation of the play fairway methodology. The system is blind, with no surface hot springs, fumaroles, or paleo-geothermal deposits. Lessons learned in the detailed studies include: 1) initially identified sites commonly include multiple favorable settings at a finer scale; 2) promising sites in Cenozoic basins cannot be recognized without detailed geophysical surveys; and 3) play fairway analysis is critical at multiple scales.

Geothermal Resources Council Transactions

Geologic setting of the proposed West Flank Forge Site, California: Suitability for EGS research and development

The proposed West Flank FORGE site is within the China Lake Naval Air Weapons Station (NAWS), China Lake, CA. The West Flank is west of the Coso geothermal field, an area of China Lake NAWS dominated by the Quaternary Coso volcanic field largely comprised of rhyolite domes and their volcaniclastic and epiclastic horizons. The largest dome flow complex, Sugarloaf Mountain, marks the northwestern margin of the geothermal field. The West Flank is situated due west of Sugarloaf. The geologic setting of the West Flank was determined from one deep well (83-11) drilled as a potential production hole in 2009. The bottom-hole temperature (BHT) of well 83-11 approaches 600 oF (315˚C), but flow tests demonstrate very low, non-commercial permeabilities. With the exception of the upper 600 feet of volcaniclastic alluvium, well 83-11 is completed in granitic basement. The West Flank possesses the primary attributes of a FORGE site: non-commercial permeability ( <10 -16 m 2 ), a 175˚ to 225˚C temperature range in crystalline rocks, and a location outside an existing geothermal field The Coso Mountains host the Coso volcanic field and are within a right-releasing stepover between the dextral Airport Lake (ALF) and Little Lake fault zones (LLFZ) and the Wild Horse Mesa and Owens Valley faults. Two distinct fault populations have been identified at Coso: WNW-trending and antithetical, NE-trending strike-slip faults and N- to NNE-trending normal faults. These faults are both high permeability drilling targets at depth within the main (productive) geothermal field and they locally segment the field into distinct hydrothermal regimes. The West Flank may be segmented from the rest of the field by one such northerly trending fault. The overall minimum principal stress orientation in the main geothermal field varies from 103˚ to 108˚; however, the minimum horizontal principal stress in 83-11 is rotated to 081˚.

California

Paleogeographic implications of Late Miocene lacustrine and nonmarine evaporite deposits in the Lake Mead region: Immediate precursors to the Colorado River

Thick late Miocene nonmarine evaporite (mainly halite and gypsum) and related lacustrine limestone deposits compose the upper basin fill in half grabens within the Lake Mead region of the Basin and Range Province directly west of the Colorado Plateau in southern Nevada and northwestern Arizona. Regional relations and geochronologic data indicate that these deposits are late synextensional to postextensional (ca. 12–5 Ma), with major extension bracketed between ca. 16 and 9 Ma and the abrupt western margin of the Colorado Plateau established by ca. 9 Ma. Significant accommodation space in the half grabens allowed for deposition of late Miocene lacustrine and evaporite sediments. Concurrently, waning extension promoted integration of initially isolated basins, progressive enlargement of drainage nets, and development of broad, low gradient plains and shallow water bodies with extensive clastic, carbonate, and/or evaporite sedimentation. The continued subsidence of basins under restricted conditions also allowed for the preservation of particularly thick, localized evaporite sequences prior to development of the through-going Colorado River. The spatial and temporal patterns of deposition indicate increasing amounts of freshwater input during the late Miocene (ca. 12–6 Ma) immediately preceding arrival of the Colorado River between ca. 5.6 and 4.9 Ma. In axial basins along and proximal to the present course of the Colorado River, evaporite deposition (mainly gypsum) transitioned to lacustrine limestone progressively from east to west, beginning ca. 12–11 Ma in the Grand Wash Trough in the east and shortly after ca. 5.6 Ma in the western Lake Mead region. In several satellite basins to both the north and south of the axial basins, evaporite deposition was more extensive, with thick halite (>200 m to 2.5 km thick) accumulating in the Hualapai, Overton Arm, and northern Detrital basins. Gravity and magnetic lows suggest that thick halite may also lie within the northern Grand Wash, Mesquite, southern Detrital, and northeastern Las Vegas basins. New tephrochronologic data indicate that the upper part of the halite in the Hualapai basin is ca. 5.6 Ma, with rates of deposition of ∼190–450 m/m.y., assuming that deposition ceased approximately coincidental with the arrival of the Colorado River. A 2.5-km-thick halite sequence in the Hualapai basin may have accumulated in ∼5–7 m.y. or ca. 12–5 Ma, which coincides with lacustrine limestone deposition near the present course of the Colorado River in the region. The distribution and similar age of the limestone and evaporite deposits in the region suggest a system of late Miocene axial lakes and extensive continental playas and salt pans. The playas and salt pans were probably fed by both groundwater discharge and evaporation from shallow lakes, as evidenced by sedimentary textures. The elevated terrain of the Colorado Plateau was likely a major source of water that fed the lakes and playas. The physical relationships in the Lake Mead region suggest that thick nonmarine evaporites are more likely to be late synextensional and accumulate in basins with relatively large catchments proximal to developing river systems or broad elevated terranes. Other basins adjacent to the lower Colorado River downstream of Lake Mead, such as the Dutch Flat, Blythe-McCoy, and Yuma basins, may also contain thick halite deposits.

Arizona, Nevada

Geologic setting of the proposed Fallon FORGE Site, Nevada: Suitability for EGS research and development

The proposed Fallon FORGE site lies within and adjacent to the Naval Air Station Fallon (NASF) directly southeast of the town of Fallon, Nevada, within the large basin of the Carson Sink in west-central Nevada. The site is located on two parcels that include land owned by the NASF and leased and owned by Ormat Nevada, Inc. The Carson Sink in the vicinity of the Fallon site is covered by Quaternary deposits, including alluvial fan, eolian, and lacustrine sediments. Four wells penetrate the entire Neogene section and bottom in Mesozoic basement. Late Miocene to Quaternary basin-fill sediments are 0.5 to >1 km thick and overlie Oligocene-Miocene volcanic and lesser sedimentary rocks. The volcanic section is 0.5 to 1.0 km thick and dominated by Miocene mafic lavas. The Neogene section rests nonconformably on heterogeneous Mesozoic basement, which consists of Triassic-Jurassic metamorphic rocks intruded by Cretaceous granitic plutons. The structural framework is dominated by a gently west-tilted half graben cut by moderately to steeply dipping N- to NNEstriking normal faults that dip both east and west. Quaternary faults have not been observed within the proposed FORGE site. Fallon was selected for a potential FORGE site due to its extensional tectonic setting, abundance of available data, existing infrastructure, and documented temperatures, permeability, and lithologic composition of potential reservoirs that fall within the ranges specified by DOE for FORGE. Since the early 1970s, more than 45 wells have been drilled for geothermal exploration within the area. Four exploration wells within the FORGE site are available for use in the project. Several additional wells are available for monitoring outside the central FORGE site within the NASF and Ormat lease area, including numerous temperature gradient holes. There is an existing, ten-station micro-seismic earthquake (MEQ) array that has been collecting data since 2001; the MEQ array can be expanded to encompass the entire Fallon project. The well data indicate that a sizeable area (~4.5 km2 ) has adequate temperatures in crystalline basement but lacks sufficient permeability within the proposed FORGE site. There are two possible, competent target formations in Mesozoic basement for stimulation in the FORGE project area: 1) Jurassic felsic metavolcanic rocks/and or metaquartzite; and 2) Cretaceous granitic intrusions. These units make up at least 3 km3 in the project area and have target temperatures of ~175-215o C. The abundant well data and detailed geophysical surveys (e.g., gravity, MT, and seismic reflection) provide significant subsurface control for the site and will permit development of a detailed 3D model. The documented temperatures, low permeability, and basement lithologies, as well as abundant available data facilitate development of a site dedicated to testing and improving new EGS technologies and techniques, thus making Fallon an ideal candidate for FORGE.

GRC Transactions