Geology topics

Nicholas E. Young

Publications and source records attributed to Nicholas E. Young.

16 recordsLinked to original sources

USGS2025

How to model a new invader? US-invaded range models outperform global or combined range models after 100 occurrences

Invasive species are an economic and ecological burden, and efforts to limit their impact are greatly improved with reliable maps based on species distribution models (SDMs). However, the potential distribution of new invaders is difficult to anticipate because they are still spreading with few observations in their invaded habitat. Therefore, an accepted practice in predicting the distribution of invasive species has been to incorporate habitat information from its entire geographic distribution (invaded and native ranges) into SDMs. Yet, this approach, due to niche shifts, niche expansions, and data deficiencies, commonly misrepresents where an invasive species is found in its new range. Here, we use time series records (invasion stages) from 13 invasive plant species in North America to explore the tension between modeling invasive species using global range and invaded range data and to determine if there is a “tipping point” at which one SDM strategy performs better than the other in predicting the ultimate distribution. At the earliest invasion stage, models developed using both invaded range and global occurrences on average performed better and had less variability across species than other model strategies at this stage. However, after as few as 100 observations of an invasive plant had been made, US-invaded range models, on average, outperformed global range models and models that combined occurrences. By building models with global and US-scale predictors, we show that higher performance of invaded range models was in part because of greater data quality at the invaded-range scale. Our work demonstrates that after relatively few observations of an invasive species in its invaded range, it is more accurate to model its potential distribution using only information from the invaded range while disregarding information from other regions. This work develops a robust and comprehensive approach to modeling novel distributions of newly observed invasive species.

North America↗

USGS2022

INHABIT: A web-based decision support tool for invasive plant species habitat visualization and assessment across the contiguous United States

Narrowing the communication and knowledge gap between producers and users of scientific data is a longstanding problem in ecological conservation and land management. Decision support tools (DSTs), including websites or interactive web applications, provide platforms that can help bridge this gap. DSTs can most effectively disseminate and translate research results when producers and users collaboratively and iteratively design content and features. One data resource seldom incorporated into DSTs are species distribution models (SDMs), which can produce spatial predictions of habitat suitability. Outputs from SDMs can inform management decisions, but their complexity and inaccessibility can limit their use by resource managers or policy makers. To overcome these limitations, we present the Invasive Species Habitat Tool (INHABIT), a novel, web-based DST built with R Shiny to display spatial predictions and tabular summaries of habitat suitability from SDMs for invasive plants across the contiguous United States. INHABIT provides actionable science to support the prevention and management of invasive species. Two case studies demonstrate the important role of end user feedback in confirming INHABIT’s credibility, utility, and relevance.

PLoSOne↗

USGS2022

Coupling process-based and empirical models to assess management options to meet conservation goals

Conservation lands face a mounting threat of ecosystem transformation and the loss of biodiversity from the invasion of fire-prone perennial and annual grasses. Managers must make difficult decisions to find efficient ways to expend limited resources to manage large and complex landscapes amidst substantial uncertainty regarding effective treatment strategies, climates, and invader-induced novel processes. We developed a state-and-transition simulation model coupled with a fire behavior model to study impacts to native biodiversity and fire regimes in a national park invaded by a perennial grass. We evaluated resources required to meet management objectives, and how to spatially allocate available resources efficiently and effectively. Management strategies and ecological scenarios strongly influenced the ability to minimize potential impacts; the inclusion of a new management strategy, aerial precision spot spraying targeting low cover levels in remote regions, was needed to supplement current treatments that can only target large, dense patches. Adding this new treatment method may be enough to conserve the desert ecosystem from small scale transformation through invasive competition and from broad functional transformations through invasive-induced fire regime changes. Spot spraying may also be highly beneficial if wetter monsoonal conditions create faster growth rates, decreasing the ability to contain the invasion even with unlimited management resources. Given current annual budgets for control, and the new treatment option, invasion control and preservation of native biodiversity may be possible regardless of spatial prioritization. Coupled empirical and process-based models efficiently simulated the effects of management activities, quantifying potential management costs and ecological impacts, while considering a wide range of possible future uncertainties associated with climate, spread rates, and wildfires lacking historical precedent. These techniques could be applied to other situations to evaluate the feasibility of conservation goals and to determine actions that would be most efficient and effective in meeting those goals.

Arizona↗

USGS2020

Assessing ecological uncertainty and simulation model sensitivity to evaluate an invasive plant species’ potential impacts to the landscape

Ecological forecasts of the extent and impacts of invasive species can inform conservation management decisions. Such forecasts are hampered by ecological uncertainties associated with non-analog conditions resulting from the introduction of an invader to an ecosystem. We developed a state-and-transition simulation model tied to a fire behavior model to simulate the spread of buffelgrass ( Cenchrus ciliaris ) in Saguaro National Park, AZ, USA over a 30-year period. The simulation models forecast the potential extent and impact of a buffelgrass invasion including size and frequency of fire events and displacement of saguaro cacti and other native species. Using simulation models allowed us to evaluate how model uncertainties affected forecasted landscape outcomes. We compared scenarios covering a range of parameter uncertainties including model initialization (landscape susceptibility to invasion) and expert-identified ecological uncertainties (buffelgrass patch infill rates and precipitation). Our simulations showed substantial differences in the amount of buffelgrass on the landscape and the size and frequency of fires for dry years with slow patch infill scenarios compared to wet years with fast patch infill scenarios. We identified uncertainty in buffelgrass patch infill rates as a key area for research to improve forecasts. Our approach could be used to investigate novel processes in other invaded systems.

Scientific Reports↗

USGS2020

A modeling workflow that balances automation and human intervention to inform invasive plant management decisions at multiple spatial scales

Predictions of habitat suitability for invasive plant species can guide risk assessments at regional and national scales and inform early detection and rapid-response strategies at local scales. We present a general approach to invasive species modeling and mapping that meets objectives at multiple scales. Our methodology is designed to balance trade-offs between developing highly customized models for few species versus fitting non-specific and generic models for numerous species. We developed a national library of environmental variables known to physiologically limit plant distributions and relied on human input based on natural history knowledge to further narrow the variable set for each species before developing habitat suitability models. To ensure efficiency, we used largely automated modeling approaches and human input only at key junctures. We explore and present uncertainty by using two alternative sources of background samples, including five statistical algorithms, and constructing model ensembles. We demonstrate the use and efficiency of the Software for Assisted Habitat Modeling [SAHM 2.1.2], a package in VisTrails, which performs the majority of the modeling analyses. Our workflow includes solicitation of expert feedback on model outputs such as spatial prediction results and variable response curves, and iterative improvement based on new data availability and directed field validation of initial model results. We highlight the utility of the models for decision-making at regional and local scales with case studies of two plant species that invade natural areas: fountain grass ( Pennisetum setaceum ) and goutweed ( Aegopodium podagraria ). By balancing model automation with human intervention, we can efficiently provide land managers with mapped predicted distributions for multiple invasive species to inform decisions across spatial scales.

PLoS ONE↗

USGS2019

Developing an expert elicited simulation model to evaluate invasive species and fire management alternatives

Invasive species can alter ecosystem properties and cause state shifts in landscapes. Resource managers charged with maintaining landscapes require tools to understand implications of alternative actions (or inactions) on landscape structure and function. Simulation models can serve as a virtual laboratory to explore these alternatives and their potential impacts on a landscape. To be useful, however, managers need to participate in model development to ensure that model structure can evaluate the response of key resources to plausible actions. Here, we detail development of a state‐and‐transition simulation model (STSM) to evaluate buffelgrass ( Cenchrus ciliaris L. syn Pennisetum ciliare (L.) Link) in Saguaro National Park (SNP), Arizona, USA, through collaboration between managers and researchers. We integrate expert knowledge and research to create and parameterize a stochastic, spatially explicit STSM to evaluate specific management objectives. We also develop a dynamic link between the STSM and a fire behavior model to allow exploration of potential novel processes introduced to the ecosystem by buffelgrass invasion. Our projections show that buffelgrass can be expected to increase on the landscape and that the integration of fire into the model accelerates the projected rate of invasion and increases degradation of resources of management concern. We highlight the benefit of engaging end users in the modeling process so that the model is targeted to evaluate management objectives, in this case retention of saguaro cacti ( Carnegiea gigantea (Engelm.) Britton & Rose) on the landscape. Being able to integrate an external model that can help address the unique characteristics of a problem such as the introduction of fire into the SNP desert ecosystem increases the ability of simulations to address complex ecological and management questions.

Ecosphere↗

USGS2019

Not so normal normals: Species distribution model results are sensitive to choice of climate normals and model type

Species distribution models have many applications in conservation and ecology, and climate data are frequently a key driver of these models. Often, correlative modeling approaches are developed with readily available climate data; however, the impacts of the choice of climate normals is rarely considered. Here, we produced species distribution models for five disparate species using four different modeling algorithms and compared results between two different, but overlapping, climate normals time periods. Although the correlation structure among climate predictors did not change between the time periods, model results were sensitive to both baseline climate period and model method, even with model parameters specifically tuned to a species. Each species and each model type had at least one difference in variable retention or relative ranking with the change in climate time period. Pairwise comparisons of spatial predictions were also different, ranging from a low of 1.6% for climate period differences to a high of 25% for algorithm differences. While uncertainty from model algorithm selection is recognized as an important source of uncertainty, the impact of climate period is not commonly assessed. These uncertainties may affect conservation decisions, especially when projecting to future climates, and should be evaluated during model development.

Climate↗

USGS2018

Evaluating potential distribution of high-risk aquatic invasive species in the water garden and aquarium trade at a global scale based on current established populations

Aquatic non‐native invasive species are commonly traded in the worldwide water garden and aquarium markets, and some of these species pose major threats to the economy, the environment, and human health. Understanding the potential suitable habitat for these species at a global scale and at regional scales can inform risk assessments and predict future potential establishment. Typically, global habitat suitability models are fit for freshwater species with only climate variables, which provides little information about suitable terrestrial conditions for aquatic species. Remotely sensed data including topography and land cover data have the potential to improve our understanding of suitable habitat for aquatic species. In this study, we fit species distribution models using five different model algorithms for three non‐native aquatic invasive species with bioclimatic, topographic, and remotely sensed covariates to evaluate potential suitable habitat beyond simple climate matches. The species examined included a frog (Xenopus laevis), toad (Bombina orientalis), and snail (Pomacea spp.). Using a unique modeling approach for each species including background point selection based on known established populations resulted in robust ensemble habitat suitability models. All models for all species had test area under the receiver operating characteristic curve values greater than 0.70 and percent correctly classified values greater than 0.65. Importantly, we employed multivariate environmental similarity surface maps to evaluate potential extrapolation beyond observed conditions when applying models globally. These global models provide necessary forecasts of where these aquatic invasive species have the potential for establishment outside their native range, a key component in risk analyses.

Risk Analysis↗

USGS2018

Forecasting an invasive species’ distribution with global distribution data, local data, and physiological information

Understanding invasive species distributions and potential invasions often requires broad‐scale information on the environmental tolerances of the species. Further, resource managers are often faced with knowing these broad‐scale relationships as well as nuanced environmental factors related to their landscape that influence where an invasive species occurs and potentially could occur. Using invasive buffelgrass ( Cenchrus ciliaris ), we developed global models and local models for Saguaro National Park, Arizona, USA, based on location records and literature on physiological tolerances to environmental factors to investigate whether environmental relationships of a species at a global scale are also important at local scales. In addition to correlative models with five commonly used algorithms, we also developed a model using a priori user‐defined relationships between occurrence and environmental characteristics based on a literature review. All correlative models at both scales performed well based on statistical evaluations. The user‐defined curves closely matched those produced by the correlative models, indicating that the correlative models may be capturing mechanisms driving the distribution of buffelgrass. Given climate projections for the region, both global and local models indicate that conditions at Saguaro National Park may become more suitable for buffelgrass. Combining global and local data with correlative models and physiological information provided a holistic approach to forecasting invasive species distributions.

Arizona↗

USGS2017

Evaluating simplistic methods to understand current distributions and forecast distribution changes under climate change scenarios: An example with coypu ( Myocastor coypus )

Invasive species provide a unique opportunity to evaluate factors controlling biogeographic distributions; we can consider introduction success as an experiment testing suitability of environmental conditions. Predicting potential distributions of spreading species is not easy, and forecasting potential distributions with changing climate is even more difficult. Using the globally invasive coypu ( Myocastor coypus [Molina, 1782]), we evaluate and compare the utility of a simplistic ecophysiological based model and a correlative model to predict current and future distribution. The ecophysiological model was based on winter temperature relationships with nutria survival. We developed correlative statistical models using the Software for Assisted Habitat Modeling and biologically relevant climate data with a global extent. We applied the ecophysiological based model to several global circulation model ( GCM ) predictions for mid-century. We used global coypu introduction data to evaluate these models and to explore a hypothesized physiological limitation, finding general agreement with known coypu distribution locally and globally and support for an upper thermal tolerance threshold. Global circulation model based model results showed variability in coypu predicted distribution among GCMs , but had general agreement of increasing suitable area in the USA. Our methods highlighted the dynamic nature of the edges of the coypu distribution due to climate non-equilibrium, and uncertainty associated with forecasting future distributions. Areas deemed suitable habitat, especially those on the edge of the current known range, could be used for early detection of the spread of coypu populations for management purposes. Combining approaches can be beneficial to predicting potential distributions of invasive species now and in the future and in exploring hypotheses of factors controlling distributions.

NeoBiota↗

USGS2016

Integrating remote sensing with species distribution models; Mapping tamarisk invasions using the Software for Assisted Habitat Modeling (SAHM)

Early detection of invasive plant species is vital for the management of natural resources and protection of ecosystem processes. The use of satellite remote sensing for mapping the distribution of invasive plants is becoming more common, however conventional imaging software and classification methods have been shown to be unreliable. In this study, we test and evaluate the use of five species distribution model techniques fit with satellite remote sensing data to map invasive tamarisk ( Tamarix spp.) along the Arkansas River in Southeastern Colorado. The models tested included boosted regression trees (BRT), Random Forest (RF), multivariate adaptive regression splines (MARS), generalized linear model (GLM), and Maxent. These analyses were conducted using a newly developed software package called the Software for Assisted Habitat Modeling (SAHM). All models were trained with 499 presence points, 10,000 pseudo-absence points, and predictor variables acquired from the Landsat 5 Thematic Mapper (TM) sensor over an eight-month period to distinguish tamarisk from native riparian vegetation using detection of phenological differences. From the Landsat scenes, we used individual bands and calculated Normalized Difference Vegetation Index (NDVI), Soil-Adjusted Vegetation Index (SAVI), and tasseled capped transformations. All five models identified current tamarisk distribution on the landscape successfully based on threshold independent and threshold dependent evaluation metrics with independent location data. To account for model specific differences, we produced an ensemble of all five models with map output highlighting areas of agreement and areas of uncertainty. Our results demonstrate the usefulness of species distribution models in analyzing remotely sensed data and the utility of ensemble mapping, and showcase the capability of SAHM in pre-processing and executing multiple complex models.

Journal of Visualized Experiments↗

USGS2016

Modeling suitable habitat of invasive red lionfish Pterois volitans (Linnaeus, 1758) in North and South America’s coastal waters

We used two common correlative species-distribution models to predict suitable habitat of invasive red lionfish Pterois volitans (Linnaeus, 1758) in the western Atlantic and eastern Pacific Oceans. The Generalized Linear Model (GLM) and the Maximum Entropy (Maxent) model were applied using the Software for Assisted Habitat Modeling. We compared models developed using native occurrences, using non-native occurrences, and using both native and non-native occurrences. Models were trained using occurrence data collected before 2010 and evaluated with occurrence data collected from the invaded range during or after 2010. We considered a total of 22 marine environmental variables. Models built with non-native only or both native and non-native occurrence data outperformed those that used only native occurrences. Evaluation metrics based on the independent test data were highest for models that used both native and non-native occurrences. Bathymetry was the strongest environmental predictor for all models and showed increasing suitability as ocean floor depth decreased, with salinity ranking the second strongest predictor for models that used native and both native and non-native occurrences, indicating low habitat suitability for salinities <30. Our model results also suggest that red lionfish could continue to invade southern latitudes in the western Atlantic Ocean and may establish localized populations in the eastern Pacific Ocean. We reiterate the importance in the choice of the training data source (native, non-native, or native/non-native) used to develop correlative species distribution models for invasive species.

Aquatic Invasions↗

USGS2015

Citizen science contributes to our knowledge of invasive plant species distributions

Citizen science is commonly cited as an effective approach to expand the scale of invasive species data collection and monitoring. However, researchers often hesitate to use these data due to concerns over data quality. In light of recent research on the quality of data collected by volunteers, we aimed to demonstrate the extent to which citizen science data can increase sampling coverage, fill gaps in species distributions, and improve habitat suitability models compared to professionally generated data sets used in isolation. We combined data sets from professionals and volunteers for five invasive plant species ( Alliaria petiolata , Berberis thunbergii , Cirsium palustre , Pastinaca sativa , Polygonum cuspidatum ) in portions of Wisconsin. Volunteers sampled counties not sampled by professionals for three of the five species. Volunteers also added presence locations within counties not included in professional data sets, especially in southern portions of the state where professional monitoring activities had been minimal. Volunteers made a significant contribution to the known distribution, environmental gradients sampled, and the habitat suitability of P. cuspidatum . Models generated with professional data sets for the other four species performed reasonably well according to AUC values (>0.76). The addition of volunteer data did not greatly change model performance (AUC > 0.79) but did change the suitability surface generated by the models, making them more realistic. Our findings underscore the need to merge data from multiple sources to improve knowledge of current species distributions, and to predict their movement under present and future environmental conditions. The efficiency and success of these approaches require that monitoring efforts involve multiple stakeholders in continuous collaboration via established monitoring networks.

Wisconsin↗

USGS2015

Using the Maxent program for species distribution modelling to assess invasion risk

MAXENT is a software package used to relate known species occurrences to information describing the environment, such as climate, topography, anthropogenic features or soil data, and forecast the presence or absence of a species at unsampled locations. This particular method is one of the most popular species distribution modelling techniques because of its consistent strong predictive performance and its ease to implement. This chapter discusses the decisions and techniques needed to prepare a correlative climate matching model for the native range of an invasive alien species and use this model to predict the potential distribution of this species in a potentially invaded range (i.e. a novel environment) by using MAXENT for the Burmese python ( Python molurus bivittatus ) as a case study. The chapter discusses and demonstrates the challenges that are associated with this approach and examines the inherent limitations that come with using MAXENT to forecast distributions of invasive alien species.

Book chapter↗

USGS2014

From hybrid swarms to swarms of hybrids

Science has shown that the introgression or hybridization of modern humans ( Homo sapiens ) with Neanderthals up to 40,000 YBP may have led to the swarm of modern humans on earth. However, there is little doubt that modern trade and transportation in support of the humans has continued to introduce additional species, genotypes, and hybrids to every country on the globe. We assessed the utility of species distributions modeling of genotypes to assess the risk of current and future invaders. We evaluated 93 locations of the genus Tamarix for which genetic data were available. Maxent models of habitat suitability showed that the hybrid, T. ramosissima x T. chinensis , was slightly greater than the parent taxa (AUCs > 0.83). General linear models of Africanized honey bees, a hybrid cross of Tanzanian Apis mellifera scutellata and a variety of European honey bee including A. m. ligustica , showed that the Africanized bees (AUC = 0.81) may be displacing European honey bees (AUC > 0.76) over large areas of the southwestern U.S. More important, Maxent modeling of sub-populations (A1 and A26 mitotypes based on mDNA) could be accurately modeled (AUC > 0.9), and they responded differently to environmental drivers. This suggests that rapid evolutionary change may be underway in the Africanized bees, allowing the bees to spread into new areas and extending their total range. Protecting native species and ecosystems may benefit from risk maps of harmful invasive species, hybrids, and genotypes.

Environment and Ecology Research↗

USGS2013

VisTrails SAHM: visualization and workflow management for species habitat modeling

The Software for Assisted Habitat Modeling (SAHM) has been created to both expedite habitat modeling and help maintain a record of the various input data, pre- and post-processing steps and modeling options incorporated in the construction of a species distribution model through the established workflow management and visualization VisTrails software. This paper provides an overview of the VisTrails:SAHM software including a link to the open source code, a table detailing the current SAHM modules, and a simple example modeling an invasive weed species in Rocky Mountain National Park, USA.

Ecography: Pattern and Diversity in Ecology↗