USGS ScienceSearch

Geology topics

Monica D. Kohler

Publications and source records attributed to Monica D. Kohler.

7 recordsLinked to original sources

Long-term ocean observing for international capacity development around tsunami early warning

The 2004 magnitude (M) 9.1 Sumatra-Andaman Islands earthquake in the Indian Ocean triggered the deadliest tsunami ever, killing more than 230,000 people. In response, the United Nations Educational, Scientific, and Cultural Organization (UNESCO) established three additional Intergovernmental Coordination Groups (ICGs) for the Tsunami and Other Coastal Hazards Early Warning System: for the Caribbean and Adjacent Regions (ICG/CARIBE-EWS), for the Indian Ocean, and for the Northeastern Atlantic, Mediterranean, and Connected Seas. Along with the ICG for the Pacific Ocean, which was established in 1965, one of the goals of the new ICGs was to improve earthquake and tsunami monitoring and early warning. This need was further demonstrated by the 2011 Great East Japan (Tōhoku-oki) earthquake and tsunami, which killed more than 20,000 people, and other destructive tsunamis that occurred in the Solomon Islands, Samoa, Tonga, Chile, Indonesia, and Peru. In response to the call to action by the UN Decade of Ocean Science for Sustainable Development (2021–2030), as well as the desired safe ocean outcome (von Hillebrandt-Andrade et al., 2021), the Intergovernmental Oceanographic Commission (IOC) of UNESCO approved the Ocean Decade Tsunami Programme in June 2021. One of its goals is to develop the capability to issue actionable alerts for tsunamis from all sources with minimum uncertainty within 10 minutes (Angove et al., 2019). While laudable, this goal presents complexities. Currently, warning depends on quick detection as well as the location and initial magnitude estimates of an earthquake that may generate a tsunami. Other factors that affect tsunamis, such as the faulting mechanism (how the faults slide past each other) and areal extent of the earthquake, currently take at least 20–30 minutes to forecast and are still subject to large uncertainties. Hence, agencies charged with tsunami early warning need to broadcast public alerts within minutes after an earthquake occurs but may struggle to meet this 10-minute goal without further technological advances, some of which are outlined in this article. To reduce loss of life through adequate tsunami warning requires global ocean-based seismic, sea level, and geodetic initiatives to detect high-impact earthquakes and tsunamis, combined with sufficient communication and education so that people know how to respond when they receive alerts and warnings. The United Nations International Strategy for Disaster Reduction defines an early warning system as “a set of capacities needed to generate and disseminate timely and meaningful warning information to enable individuals, communities, and organizations threatened by a hazard to prepare and to act appropriately and in sufficient time to reduce the possibility of harm or loss” (UNISDR, 2012). In short, a successful early warning system requires technology coupled with human factors (Kelman and Glantz, 2014). In this article, we explore case studies from Japan and Canada, where scientists are leading the way in incorporating ocean observing capabilities in their early warning systems. We also explore advancements and challenges in the Caribbean, an area with a complex tectonic environment that would benefit greatly from increased global ocean observing capabilities. We also explore physical and social science interventions necessary to reduce loss of life.

Oceanography

Earthquake Early Warning ShakeAlert System: Testing and certification platform

Earthquake early warning systems provide warnings to end users of incoming moderate to strong ground shaking from earthquakes. An earthquake early warning system, ShakeAlert, is providing alerts to beta end users in the western United States, specifically California, Oregon, and Washington. An essential aspect of the earthquake early warning system is the development of a framework to test modifications to code to ensure functionality and assess performance. In 2016, a Testing and Certification Platform (TCP) was included in the development of the Production Prototype version of ShakeAlert. The purpose of the TCP is to evaluate the robustness of candidate code that is proposed for deployment on ShakeAlert Production Prototype servers. TCP consists of two main components: a real‐time in situ test that replicates the real‐time production system and an offline playback system to replay test suites. The real‐time tests of system performance assess code optimization and stability. The offline tests comprise a stress test of candidate code to assess if the code is production ready. The test suite includes over 120 events including local, regional, and teleseismic historic earthquakes, recentering and calibration events, and other anomalous and potentially problematic signals. Two assessments of alert performance are conducted. First, point‐source assessments are undertaken to compare magnitude, epicentral location, and origin time with the Advanced National Seismic System Comprehensive Catalog, as well as to evaluate alert latency. Second, we describe assessment of the quality of ground‐motion predictions at end‐user sites by comparing predicted shaking intensities to ShakeMaps for historic events and implement a threshold‐based approach that assesses how often end users initiate the appropriate action, based on their ground‐shaking threshold. TCP has been developed to be a convenient streamlined procedure for objectively testing algorithms, and it has been designed with flexibility to accommodate significant changes in development of new or modified system code. It is expected that the TCP will continue to evolve along with the ShakeAlert system, and the framework we describe here provides one example of how earthquake early warning systems can be evaluated.

California, Oregon, Washington

Earthquake early Warning ShakeAlert system: West coast wide production prototype

Earthquake early warning (EEW) is an application of seismological science that can give people, as well as mechanical and electrical systems, up to tens of seconds to take protective actions before peak earthquake shaking arrives at a location. Since 2006, the U.S. Geological Survey has been working in collaboration with several partners to develop EEW for the United States. The goal is to create and operate an EEW system, called ShakeAlert, for the highest risk areas of the United States, starting with the West Coast states of California, Oregon, and Washington. In early 2016, the Production Prototype v.1.0 was established for California; then, in early 2017, v.1.2 was established for the West Coast, with earthquake notifications being distributed to a group of beta users in California, Oregon, and Washington. The new ShakeAlert Production Prototype was an outgrowth from an earlier demonstration EEW system that began sending test notifications to selected users in California in January 2012. ShakeAlert leverages the considerable physical, technical, and organizational earthquake monitoring infrastructure of the Advanced National Seismic System, a nationwide federation of cooperating seismic networks. When fully implemented, the ShakeAlert system may reduce damage and injury caused by large earthquakes, improve the nation’s resilience, and speed recovery.

California, Oregon, Washington

ShakeNet: a portable wireless sensor network for instrumenting large civil structures

We report our findings from a U.S. Geological Survey (USGS) National Earthquake Hazards Reduction Program-funded project to develop and test a wireless, portable, strong-motion network of up to 40 triaxial accelerometers for structural health monitoring. The overall goal of the project was to record ambient vibrations for several days from USGS-instrumented structures. Structural health monitoring has important applications in fields like civil engineering and the study of earthquakes. The emergence of wireless sensor networks provides a promising means to such applications. However, while most wireless sensor networks are still in the experimentation stage, very few take into consideration the realistic earthquake engineering application requirements. To collect comprehensive data for structural health monitoring for civil engineers, high-resolution vibration sensors and sufficient sampling rates should be adopted, which makes it challenging for current wireless sensor network technology in the following ways: processing capabilities, storage limit, and communication bandwidth. The wireless sensor network has to meet expectations set by wired sensor devices prevalent in the structural health monitoring community. For this project, we built and tested an application-realistic, commercially based, portable, wireless sensor network called ShakeNet for instrumentation of large civil structures, especially for buildings, bridges, or dams after earthquakes. Two to three people can deploy ShakeNet sensors within hours after an earthquake to measure the structural response of the building or bridge during aftershocks. ShakeNet involved the development of a new sensing platform (ShakeBox) running a software suite for networking, data collection, and monitoring. Deployments reported here on a tall building and a large dam were real-world tests of ShakeNet operation, and helped to refine both hardware and software.

Open-File Report

A new perspective on the geometry of the San Andreas Fault in southern California and its relationship to lithospheric structure

The widely held perception that the San Andreas fault (SAF) is vertical or steeply dipping in most places in southern California may not be correct. From studies of potential‐field data, active‐source imaging, and seismicity, the dip of the SAF is significantly nonvertical in many locations. The direction of dip appears to change in a systematic way through the Transverse Ranges: moderately southwest (55°–75°) in the western bend of the SAF in the Transverse Ranges (Big Bend); vertical to steep in the Mojave Desert; and moderately northeast (37°–65°) in a region extending from San Bernardino to the Salton Sea, spanning the eastern bend of the SAF in the Transverse Ranges. The shape of the modeled SAF is crudely that of a propeller. If confirmed by further studies, the geometry of the modeled SAF would have important implications for tectonics and strong ground motions from SAF earthquakes. The SAF can be traced or projected through the crust to the north side of a well documented high‐velocity body (HVB) in the upper mantle beneath the Transverse Ranges. The north side of this HVB may be an extension of the plate boundary into the mantle, and the HVB would appear to be part of the Pacific plate.

California

The "LARSE" Project - Working Toward a Safer Future for Los Angeles

The Los Angeles region is underlain by a network of active faults, including many that are deep and do not break the Earth's surface. These hidden faults include the previously unknown one responsible for the devastating January 1994 Northridge earthquake, the costliest quake in U.S. history. So that structures can be built or strengthened to withstand the quakes that are certain in the future, the Los Angeles Region Seismic Experiment (LARSE) is locating hidden earthquake hazards beneath the region to help scientists determine where the strongest shaking will occur.

California

El Proyecto Sismico "LARSE" - Trabajando Hacia un Futuro con Mas Seguridad para Los Angeles

La region de Los Angeles contiene una red de fallas activas, incluyendo muchas fallas por empuje que son profundas y no rompen la superficie de la tierra. Estas fallas ocultas incluyen la falla anteriormente desconocida que fue responsable por la devastacion que ocurrio durante el terremoto de Northridge en enero de 1994, el terremoto mas costoso en la historia de los Estados Unidos. El Experimento Sismico en la Region de Los Angeles (Los Angeles Region Seismic Experiment, LARSE), esta localizando los peligros ocultos de los terremotos debajo de la region de Los Angeles para mejorar la construccion de las estructuras que pueden apoyar terremotos que son inevitables en el futuro, y que ayudaran a los cientificos determinar donde occurira el sacudimento mas fuerte y poderoso.

Fact Sheet