Michelle R. Arias | USGS Science

USGS2018

Geochemical data for water, streambed sediment, and fish tissue from the Sierra Nevada Mercury Impairment Project, 2011–12

This report presents geochemical data for surface water, streambed sediment, and fish tissue samples collected during low-flow conditions in 20 to 24 Sierra Nevada streams during 2011 and 2012. The dataset is part of a larger study designed to assess the factors that control mercury concentrations in fish tissue and to develop a model that predicts mercury concentration in the tissue of selected fish species in Sierra Nevada streams. The ranges of total mercury concentration observed in different matrices of water and sediment from 24 locations were as follows: below detection to 0.86 nanograms per liter in filtered water, below detection to 4.06 nanograms per liter in suspended particulates (greater than 0.3 micrometer in diameter), 1.1 to 381 nanograms per gram in bed sediment less than 2 millimeters, and 28.1 to 1,410 nanograms per gram in bed sediment less than 0.063 millimeters. The ratio of monomethyl mercury to total mercury ranged as follows: below detection to 19.2 percent in filtered water, below detection to 51.7 percent in suspended particles (greater than 0.3 micrometer), and below detection to 7.6 percent in streambed sediment less than 2 millimeters. Fish from 3 species collected at 20 locations had the following range in total mercury concentration (all concentrations wet weight): 10 to 292 nanograms per gram in rainbow trout (293 fish, 19 locations), 13 to 386 nanograms per gram in brown trout (33 fish, 10 locations), and 159 nanograms per gram in hardhead (1 fish). Concentrations of selenium in fish (wet weight) ranged from 60 to 420 nanograms per gram in rainbow trout (66 fish, 19 locations) and from 180 to 240 nanograms per gram in brown trout (6 fish, 2 locations).

Sierra Nevada↗

USGS2017

Geochemistry of mercury and other constituents in subsurface sediment—Analyses from 2011 and 2012 coring campaigns, Cache Creek Settling Basin, Yolo County, California

Cache Creek Settling Basin was constructed in 1937 to trap sediment from Cache Creek before delivery to the Yolo Bypass, a flood conveyance for the Sacramento River system that is tributary to the Sacramento–San Joaquin Delta. Sediment management options being considered by stakeholders in the Cache Creek Settling Basin include sediment excavation; however, that could expose sediments containing elevated mercury concentrations from historical mercury mining in the watershed. In cooperation with the California Department of Water Resources, the U.S. Geological Survey undertook sediment coring campaigns in 2011–12 (1) to describe lateral and vertical distributions of mercury concentrations in deposits of sediment in the Cache Creek Settling Basin and (2) to improve constraint of estimates of the rate of sediment deposition in the basin. Sediment cores were collected in the Cache Creek Settling Basin, Yolo County, California, during October 2011 at 10 locations and during August 2012 at 5 other locations. Total core depths ranged from approximately 4.6 to 13.7 meters (15 to 45 feet), with penetration to about 9.1 meters (30 feet) at most locations. Unsplit cores were logged for two geophysical parameters (gamma bulk density and magnetic susceptibility); then, selected cores were split lengthwise. One half of each core was then photographed and archived, and the other half was subsampled. Initial subsamples from the cores (20-centimeter composite samples from five predetermined depths in each profile) were analyzed for total mercury, methylmercury, total reduced sulfur, iron speciation, organic content (as the percentage of weight loss on ignition), and grain-size distribution. Detailed follow-up subsampling (3-centimeter intervals) was done at six locations along an east-west transect in the southern part of the Cache Creek Settling Basin and at one location in the northern part of the basin for analyses of total mercury; organic content; and cesium-137, which was used for dating. This report documents site characteristics; field and laboratory methods; and results of the analyses of each core section and subsample of these sediment cores, including associated quality-assurance and quality-control data.

California↗