Geology topics

Michel C. Boufadel

Publications and source records attributed to Michel C. Boufadel.

3 recordsLinked to original sources

USGS2021

The formation, transport, and breakup of submerged oil-particle aggregates in Great Lakes riverine environments

The formation, transport, and resuspension of oil-particle aggregates (OPA) in freshwater environments are of much interest to oil spill responders and scientists, especially as transportation of light and heavy crude oils has substantially increased across river corridors and coasts in the Great Lakes Basin. The persistent sheening from accumulated OPA along 60 km of the Kalamazoo River in Michigan’s lower peninsula resulted in a lengthy and expensive cleanup for the 2010 Enbridge Line 6B pipeline rupture. The interaction of oil with river mineral sediment and organic matter and its long-term fate depend on the physical properties of the oil and particles as well as the environmental setting of river, its climate, morphology, currents and mixing opportunities. This research brief describes the expanded work conducted for the cleanup for the 2010 Enbridge Line 6B pipeline rupture and includes laboratory experiments of aggregate characteristics with Cold Lake Blend and a range of sediment particle sizes, addition of an OPA formation algorithm to an existing sediment contaminant transport model, and development of a simplified, particle-tracking based rapid response model of OPA formation, transport, and deposition. A description of formulas developed for mixing energy in rivers in terms of river properties is also included.

Michigan↗

USGS2016

A-DROP: A predictive model for the formation of oil particle aggregates (OPAs)

Oil–particle interactions play a major role in removal of free oil from the water column. We present a new conceptual–numerical model, A-DROP, to predict oil amount trapped in oil–particle aggregates. A new conceptual formulation of oil–particle coagulation efficiency is introduced to account for the effects of oil stabilization by particles, particle hydrophobicity, and oil–particle size ratio on OPA formation. A-DROP was able to closely reproduce the oil trapping efficiency reported in experimental studies. The model was then used to simulate the OPA formation in a typical nearshore environment. Modeling results indicate that the increase of particle concentration in the swash zone would speed up the oil–particle interaction process; but the oil amount trapped in OPAs did not correspond to the increase of particle concentration. The developed A-DROP model could become an important tool in understanding the natural removal of oil and developing oil spill countermeasures by means of oil–particle aggregation.

Marine Pollution Bulletin↗

USGS2016

Integrated modeling approach for fate and transport of submerged oil and oil-particle aggregates in a freshwater riverine environment

The Enbridge Line 6B pipeline release of diluted bitumen into the Kalamazoo River downstream of Marshall, Michigan, U.S.A., in July 2010 was one of the largest oil spills into freshwater in North American history. A portion of the oil interacted with river sediment and submerged requiring the development and implementation of new approaches for detection and recovery of oil mixed with river sediment. Hydrodynamic and sediment transport modeling became an integral part of containment and recovery operations for decision support about the potential fate and migration of submerged oil and oiled sediment. Three models were developed for the U.S. Environmental Protection Agency to cover a range of spatial scales of interest to onsite operations. Two-dimensional (2D) hydrodynamic and sediment transport models from the Environmental Fluid Dynamics Code and the sediment bed model SEDZLJ1 were used to simulate potential resuspension, migration, and deposition of submerged oil and oiled sediment along a 38-mile reach of the Kalamazoo River affected by the oil from Marshall to Kalamazoo. An algorithm was added to SEDZLJ to represent three additional particle size classes of oilparticle aggregates (OPAs) with a range of sizes, specific gravities, and settling velocities. Field and laboratory experiments and flume tests were done to support the numerical modeling of OPAs. A three-dimensional hydrodynamic model was developed to simulate hydrodynamics and OPA tracking through Morrow Lake, the most downstream impoundment. This model incorporated wind and dam operations into high and low flow, lake drawdown, and containment simulations. Finally, a 2D unstructured grid model, HydroSed2D, was used to simulate flows and sediment transport along 1- to 2-mile segments of the Kalamazoo River around islands and through side channels and backwater areas that are particularly prone to submerged oil deposition. Integrated models could be developed quickly due to the availability of information and services combined with spill response operations that included: bathymetry and topography data, fieldbased geomorphic mapping of submerged oil, and discharge measured at U.S. Geological Survey streamflow gauges. Modeling results were included in a multiple-lines-of-evidence approach that was used by the Federal On-Scene Coordinator and operations staff for decision-making related to assessment and recovery of submerged oil, as well as net environmental benefit analysis. Similar modeling approaches will likely be useful for future oil spills in riverine environments.

Michigan↗