Geology topics
Michael J. Abrams
Publications and source records attributed to Michael J. Abrams.
Seismic zonation of Port-Au-Prince using pixel- and object-based imaging analysis methods on ASTER GDEM
We report about a preliminary study to evaluate the use of semi-automated imaging analysis of remotely-sensed DEM and field geophysical measurements to develop a seismic-zonation map of Port-au-Prince, Haiti. For in situ data, V S 30 values are derived from the MASW technique deployed in and around the city. For satellite imagery, we use an ASTER GDEM of Hispaniola. We apply both pixel- and object-based imaging methods on the ASTER GDEM to explore local topography (absolute elevation values) and classify terrain types such as mountains, alluvial fans and basins/near-shore regions. We assign NEHRP seismic site class ranges based on available V S 30 values. A comparison of results from imagery-based methods to results from traditional geologic-based approaches reveals good overall correspondence. We conclude that image analysis of RS data provides reliable first-order site characterization results in the absence of local data and can be useful to refine detailed site maps with sparse local data.
Alteration mapping using multispectral images: Cuprite mining district, Esmeralda County, Nevada
No abstract available.
Evaluation of Landsat multispectral scanner images for mapping altered rocks in the East Tintic Mountains, Utah
The East Tintic Mountains, Utah consist of folded and faulted Paleozoic sedimentary rocks, which are partly covered by Tertiary volcanic rocks. Clastic rocks dominate the lower one-third of the Paleozoic section, whereas carbonate rocks with subordinate amounts of shale and elastic rocks predominate in the remainder. Some of the rocks, especially the Tintic Quartzite and some shales, are commonly limonitic, an important factor in analysis of Landsat MSS images. The volcanic rocks, mainly tuffs, flows, and agglomerates of quartz latitic and latitic composition, are limonitic in a few places where hematite is present in the groundmass. Emplacement of monzonite and biotite monzonite porphyry bodies resulted in several types of altered rocks. Most widespread are argillized and silicified rocks, which are commonly bleached and limonitic. Locally, the intrusive rocks arc also altered. Hydrothermal dolomite is common in the northern part of the area, and in the East Tintic mining district, calcitic, chloritic, and weakly argillized volcanic rocks and pebble dikes are widespread. Volcanic rocks subjected to an early phase of "intravolcanic weathering" in this district are weakly altered but commonly limonitic. Barren as well as mineralized veins are present throughout the study area. In situ spectral reflectance curves representing the most abundant altered and unaltered rocks show that the argillized and silicified rocks generally have intense ferric-iron and hydroxyl absorption bands owing to the presence of iron-oxide and hydroxyl-bearing phases, respectively. These features are generally absent in the unaltered rocks, except the limonitic rocks, which have prominent iron absorption hands. Both spectral features are weakly expressed in the volcanic rocks subjected to accelerated weathering, On the other hand, hydrothermal dolomite and calcitic volcanic rocks generally lack both features, and thus are spectrally similar to the unaltered rocks. Chloritic rocks are of limited distribution and have not been measured spectrally. Most of the silicified and argillized areas are apparent in Skylab S190B, high altitude-, and low altitude color aerial photographs because of the high albedo of these rocks. However, many unaltered rocks have similar albedos and therefore are not distinguishable from the altered rocks. Moreover, very little color information is available in these photographs. These problems are further complicated by brightness variations related to topographic slope. MSS ratio images were generated to subdue the effects of topographic slope and albedo, and combined into several color composite images for displaying the spectral reflectance differences between the most widespread altered and unaltered rocks. The most effective combination proved to be MSS 4/5, MSS 4/6, and MSS 6/7 using blue, yellow and magenta diazo films, respectively, rather than the MSS 4/5, MSS 5/6, and MSS 6/7 combination used so successfully in south-central Nevada. Consideration of schematic frequency distributions of ratio values for these two areas suggests that the lack of enhancement of limonitic rocks in MSS 5/6 images of the present study area is due to the higher frequency of low ratios representing vegetation. Comparison of a limonitic bedrock map produced by scanning the optimum color-ratio composite image with a map of the silicified rocks shows good agreement, except where they are obscured by vegetation. Measurements of vegetation density indicate that shrub cover and. juniper, pinyon, and sage cover greater than 40-50 and 33-43 percent, respectively, obscure limonitic rocks in these images. Argillized rocks, the most widely distributed altered rock type, were consistently detected in exposed areas. On the other hand, hydrothermal dolomite and calcitic and chloritic volcanic rocks are not portrayed in the limonitic bedrock map because of their general lack of limonite. Some altered rocks, especially veins and pebble dikes, are too small to be detected by the MSS except where they are closely spaced and well exposed. Another important limitation is that exposures of unaltered limonitic sedimentary and volcanic rocks are included in the limonitic bedrock map. Analysis of in situ spectral reflectance measurements indicates that this limitation can be largely overcome by obtaining radiance information in the 2.2 and 1.6 μ m regions.
Discrimination of hydrothermally altered rocks along the Battle Mountain-Eureka, Nevada, mineral belt using Landsat images
Landsat Multispectral Scanner (MSS) images of the northwestern part of the Battle Mountain-Eureki, Nevada mineral belt were evaluated for distinguishing hydrothermally altered rocks associated with porphyry copper and disseminated gold deposits. Detection of altered rocks from Landsat is based on the distinctive spectral reflectance of limonite present at coatings on weathered surfaces Some altered rocks are visible as bleached areas in individual MSS bands; however, they cannot be consistently distinguished from unaltered rocks with high albedo nor from bright areas resulting .from topographic slope. Black-and-white ratio images were generated to subdue .topographic effects, and three ratio images were composited in color to portray spectral radiance differences, forming an image known as a color-ratio composite (CRC). The optimum CRC image for this area has MSS 4/5 as blue, MSS 4/6 as yellow, and MSS 6/7 as magenta, and differs in two respects from most CRC images of arid areas. First, as a result of the increased vegetation cover in the study area, MSS 5/6 was replaced by MSS 4/6 as the yellow layer. Second, 70 mm positive transparencies were replaced by large format images (64 cm), thereby improving the internal registration of the CRC image and the effective spatial resolution. The pattern of limonitic rocks depicted in the CRC closely agrees with the mapped pattern of the alteration zones at the Copper Canyon and Copper Basin porphyry copper deposits. Certain west-facing topographic slopes in the altered areas are depicted as unaltered in the CRC, apparently due to atmospheric scattering, and illustrate the need for atmospheric correction. The disseminated gold deposits at Gold Acres and Tenabo are poorly represented in the CRC because of the general absence of limonite on these deposits. The presence of unaltered limonitic sedimentary and volcanic rocks is the largest obstacle to discriminating altered areas within the mineral belt. Reflectance spectra, made in situ and in the laboratory indicate differences between altered and unaltered rocks in the Spectra region between 1.1 ?m and 2.5 ?m. Such differences may be detectable by a remote scanner with a longer wavelength range than current Landsat MSS (0.6 ?m-1.1 ?m).
Use of imaging in the 0.46-2.36 [micrometers] spectral region for alteration mapping in the Cuprite mining district, Nevada
Color composites of Landsat MSS ratio images that display variations in the intensity of ferric-iron absorption bands are highly effective for mapping limonitic altered rocks, but ineffective for mapping nonlimonitic altered rocks. Analysis of 0.45-2.5 ?m field and laboratory spectra shows that iron-deficient opalites in the Cuprite mining district, Nevada, have an intense OH-absorption band near 2.2 ?m owing to their clay mineral and alunite contents and that this spectral feature is absent or weak in adjacent unaltered tuff and basalt. To evaluate the usefulness of this spectral feature for discriminating between altered and unaltered rocks, we generated color-ratio composite images from multispectral (0.46-2.36 ?m) aircraft data. The altered rocks in the district can be discriminated from unaltered rocks with few ambiguities; in addition, some effects of mineralogical zoning can be discriminated within the altered area. Only variations in amounts of limonite can be discerned in shorter wavelength aircraft data, Landsat MSS bands, and color aerial photographs.