Geology topics

Matthew A. Arsenault

Publications and source records attributed to Matthew A. Arsenault.

3 recordsLinked to original sources

USGS2009

Mineral Resource Assessment of Marine Sand Resources in Cape- and Ridge-Associated Marine Sand Deposits in Three Tracts, New York and New Jersey, United States Atlantic Continental Shelf

Demand is growing in the United States and worldwide for information about the geology of offshore continental shelf regions, the character of the seafloor, and sediments comprising the seafloor and subbottom. Interest in locating sand bodies or high quality deposits that have potential as sources for beach nourishment and ecosystem restoration is especially great in some regions of the country. The Atlantic coast, particularly New York and New Jersey, has been the focus of these studies for the past 40 years with widely varying results. This study is the first attempt at applying probability statistics to modeling Holocene-age cape-and ridge-associated sand deposits and thus focuses on distinct sand body morphology. This modeling technique may have application for other continental shelf regions that have similar geologic character and late Quaternary sea-level transgression history. An estimated volume of 3.9 billion m3 of marine sand resources is predicted in the cape-and ridge-associated marine sand deposits in three representative regions or tracts on the continental shelf offshore of New York and New Jersey. These estimates are taken from probabilistic distributions of sand resources and are produced using deposit models and Monte Carlo Simulation (MCS) techniques. The estimated sand resources presented here are for only three tracts as described below and for Holocene age sand resources contained in cape-and ridge-associated marine sand deposit types within this area. Other areas may qualify as tracts for this deposit type and other deposit types and geologic ages (for example, paleo-stream channels, blanket and outwash deposits, ebb-tide shoals, and lower sea level-stand deltas), which are present on the New Jersey and New York continental shelf area but are not delineated and modeled in this initial evaluation. Admittedly, only a portion of these probable sand resources will ultimately be available and suitable for production, dependent largely on geographic, economic, preemptive use, environmental, geologic and political factors. In addition, offshore sand resources should only be considered if the area is seaward of the active zone of significant nearshore sediment transport, about 10 to 12 m in depth, and in sufficiently shallow water so that sand can be extracted within U.S. dredging equipment limits, currently about 40 m in depth. If the material is to be used for beach nourishment, material must be of an appropriate sediment texture and character (grain size, sorting, shape, and color) to match the native beach and have mineralogical properties important to its use. Extraction of sand can disturb or alter the benthic habitat and seafloor ecology, so these factors and other site-specific effects will need to be evaluated for any intended use. These and other factors are not considered in this report but can be expected to reduce the total net volume of sand resources available for production. The purpose of this report is to describe and present results from a probabilistic mineral modeling technique previously applied to onshore mineral resources. This modeling and assessment procedure is being used for the first time to assess and estimate offshore aggregate resources; this study is part of the U.S. Geological Survey (USGS) Marine Aggregates Resources and Processes Project (http://woodshole.er.usgs.gov/project-pages/aggregates/).

Bulletin↗

USGS2007

Surficial sediment character of the New York-New Jersey offshore continental shelf region: A GIS compilation

Broad continental shelf regions such as the New York Bight are the product of a complex geologic history and dynamic oceanographic processes, dominated by the Holocene marine transgression (>100 m sea-level rise) following the end of the last Pleistocene ice advance ~ 20,000 years ago. The area of the U.S. Exclusive Economic Zone (U.S. EEZ) territory, extending 200 nautical miles seaward from the coast, is larger than the continental U.S. and contains submerged landforms that provide a variety of natural functions and societal benefits, such as: critical habitats for fisheries, ship navigation and homeland security, and engineering activities (i.e. oil and gas platforms, pipeline and cable routes, potential wind-energy-generation sites). Some parts of the continental margins, particularly inner-continental shelf regions, also contain unconsolidated hard-mineral deposits such as sand and gravel that are regarded as potential aggregate resources to meet or augment needs not met by onshore deposits (Williams, 1992). The present distribution of surficial sediment off the northeastern United States is shaped from the deposits left by the last glaciation and reflects the cumulative effects of sediment erosion, transport, sorting, and deposition by storm and tidal processes during the Holocene rise in sea level. As a result, the sediments on the sea floor represent both an historical record of former conditions and a guide to possible future sedimentary environments. The U.S. Geological Survey (USGS) through the Coastal and Marine Geology Program, in cooperation with the University of Colorado and other partners, has compiled extant sediment character and textural data as well as other geologic information on the sea floor from all regions around the U.S. into the usSEABED data system (Reid and others, 2005; Buczkowski and others, 2006; Reid and others, 2006). The usSEABED system, which contains information on sediment grain size and lithology for more than 340,500 stations within the U.S. EEZ. has been developed and populated with data as part of the USGS Marine Aggregate Resources and Processes and the National Benthic Habitats projects in order to provide the base-line data needed to update the current maps of offshore surficial geologic character and sediment distribution. The maps are also used to characterize benthic sea floor environments important for marine ecosystems. U.S. Geological Survey, Data Series 118 (Reid and others, 2005), of the usSEABED data release series, represents the combined efforts of the USGS and several other government agencies to provide a unified resource for accessing and preserving records of U.S. east coast sea floor geologic information and sediment texture data. For this present report, we have chosen to focus on the New York-New Jersey region, an area that has been intensely studied by the USGS for many years to address many complex issues. This report illustrates the uses of the usSEABED database for GIS applications, while offering additional insight into the resources and data available from the USGS and its collaborative institutions. This report is based on data contained in U.S. Geological Survey Data Series 118 (Reid and others, 2005) and shows an assortment of example GIS products that are possible using usSEABED. All data are intended to be GIS-ready and should not require any additional cleanup, formatting, or renaming of fields in order to use the data in a Geographic Information System. This project employs the Environmental Systems Research Institute's (ESRI) ArcView™ software. Many of these maps were made as part of the ongoing USGS study to assess marine aggregate resources offshore New York and New Jersey, but these maps can serve many other purposes. The marine science community, educators, students and others are encouraged to use these data to generate GIS products for their own purposes. The objectives of the Marine Aggregate Resources and Processes project are to produce a series of new geologic maps and reports of the sea floor that will provide scientific insights into the character and geologic development of U.S. continental margins and to use these maps and information to assess the potential availability of offshore sand and gravel resources. The mapping and aggregate resource assessments are being conducted on a national scale using the usSEABED data base as described in Williams and others (2003). Potential uses for these data include: (1) defining the geological variability of the sea floor in relation to benthic habitat diversity; (2) improving our understanding of the processes that control the distribution and transport of bottom sediments and benthic habitats; (3) locating aggregate resources for beach nourishment and industrial applications; and (4) providing a detailed geospatial framework for future marine science research, monitoring, and management activities. The initial assessments are in progress for the New York Bight and Louisiana offshore areas.

New Jersey, New York↗

USGS2006

Surficial sediment character of the Louisiana offshore continental shelf region: A GIS compilation

The Louisiana coastal zone, comprising the Mississippi River delta plain stretching nearly 400 km from Sabine Pass at the Texas border east to the Chandeleur Islands at the Mississippi border, represents one of North America’s most important coastal ecosystems in terms of natural resources, human infrastructure, and cultural heritage. At the same time, this region has the highest rates of coastal erosion and wetland loss in the Nation due to a complex combination of natural processes and anthropogenic actions over the past century. Comparison of historical maps dating back to 1855 and recent aerial photography show the Louisiana coast undergoing net erosion at highly variable rates. Rates have increased significantly during the past several decades. Earlier published statewide average shoreline erosion rates were >6 m/yr; rates have increased recently to >10 m/yr. The increase is attributable to collective action of storms, rapid subsidence, and pervasive man-made alterations of the rivers and the coast. In response to the dramatic landloss, regional-scale restoration plans are being developed by a partnership of federal and state agencies for the delta plain that have the objectives of maintaining the barrier islands, reducing wetland loss, and enhancing the natural sediment delivery processes. There is growing awareness that the sustainability of coastal Louisiana's natural resources and human infrastructure depends on the successful restoration of natural geologic processes. Critical to the long term success of restoration is scientific understanding of the geologic history and processes of the coastal zone region, including interactions between the rivers, wetlands, coast, and inner shelf. A variety of geophysical studies and mapping of Late Quaternary sedimentary framework and coastal processes by U.S. Geological Survey and other scientists during the past 50 years document that the Louisiana delta plain is the product of a complex history of cyclic delta switching by the Mississippi River and its distributaries over the past ~10,000 years that resulted in laterally overlapping deltaic depocenters. The interactions among riverine, coastal, and inner shelf processes have been superimposed on the Holocene transgression resulting in distinctive landforms and sedimentary sequences. Four Holocene shelf-phase delta complexes have been identified using seismic reflection data and vibracores. Each delta complex is bounded by transgressive surfaces. Following each cycle of deposition and abandonment, the delta lobes undergo regional subsidence and marine reworking that forms transgressive coastal systems and barrier islands. Ultimately, the distal end of each of the abandoned delta lobes is marked by submerged marine sand bodies representing drowned barriers. These sand bodies (e.g. Ship Shoal, Outer Shoal, Trinity Shoal, Tiger Shoal, St. Bernard Shoal) offer the largest volumes and highest quality sand for beach nourishment and shoreline and wetlands restoration. These four large sand shoals on inner continental shelf, representing the reworked remnants of former prograded deltaic headlands that existed on the continental shelf at lower sea level, were generated in the retreat path of the Mississippi River delta plain during the Holocene transgression. Penland and others (1989) have shown these sand bodies represent former shoreline positions associated with lower still stands in sea level. Short periods of rapid relative sea-level rise led to the transgressive submergence of the shorelines which today can be recognized at the -10 m to -20 m isobaths on the Louisiana continental shelf. Trinity Shoal and Ship Shoal represent the -10 m middle-to-late Holocene shoreline trend, whereas Outer Shoal and the St. Bernard Shoals define the -20 m early Holocene shoreline trend (Penland and others, 1989). Collectively, these sand shoals constitute a large volume of high quality sandy sediment potentially suitable for barrier island nourishment and coastal restoration. The USGS has actively supported coastal and wetlands geologic research for the past two decades in partnership with universities (e.g., Louisiana State University, University of New Orleans), state agencies (e.g. Louisiana Geological Survey, Louisiana Department of Natural Resources), and private organizations (Williams and others, 1992a,b; Williams and Cichon, 1993; List and others, 1994). These studies have focused on regional-scale mapping of coastal and wetland change and developing a better understanding of the processes that cause coastal erosion and wetlands loss, particularly the rapid deterioration of Louisiana's barrier islands, estuaries, and wetlands environments. With a better understanding of these processes, the ability to model and predict erosion and wetlands loss will improve. More accurate predictions will, in turn, allow for proper management of coastal resources. Improved predictions will also allow for better assessments of the utility of different restoration alternatives.

Louisiana↗