Geology topics

Maria Deszcz-Pan

Publications and source records attributed to Maria Deszcz-Pan.

13 recordsLinked to original sources

USGS2024

Deep resistivity geophysics of the San Juan–Silverton caldera complex, San Juan County, Colorado (USA)

Magnetotelluric (MT) and audiomagnetotelluric (AMT) data are used to better understand the subsurface geology and mineral resources in the San Juan–Silverton caldera complex located near Silverton, Colorado, western United States, as part of the extensive southern Rocky Mountains volcanic field that covers much of southwestern Colorado and northern New Mexico. Seven MT and AMT profiles of varying lengths image resistivity structure to depths of ~5 km. The AMT inversion models characterize geophysical responses of near-surface lithologies, structures, and mineralized systems and also help corroborate airborne electromagnetic data at shallow levels. The MT inversion models extend our depth of investigation from near the surface to great depths (~5 km) and help to form hypotheses about roots of the hydrothermal plumbing that fed shallower mineralized systems. Subsurface high resistivities occur beneath intermediate-composition lava flows and Proterozoic units. Subsurface moderate- to low-resistivity values may reflect hydrothermal plumbing that served as flow paths for mineralizing fluids and metallic ore formation. The model interpretations presented in this study could be utilized in remediation planning or mineral resource applications. The methods used could be applied to other watersheds with similar volcanic environments containing acid-generating historical mines or hydrothermally altered and mineralized source rocks.

Colorado↗

USGS2023

Geophysical data provide three dimensional insights into porphyry copper systems in the Silverton caldera, Colorado, USA

The Silverton caldera in southwest Colorado, USA hosts polymetallic veins and pervasively altered rocks indicative of porphyry copper systems. Nearly a kilometer of erosion has exposed multiple levels of the hydrothermal systems from shallow lithocaps down to quartz-sericite-pyrite veins. New airborne electromagnetic and magnetic survey data are integrated with previous alteration mapping and porphyry models to show the subsurface geophysical response of shallow to deep levels of the porphyry system. Qualitative map views show lateral changes in the magnetization and resistivity of the hydrothermally altered rocks. The volcanic terrain exhibits high magnetization and high amplitude anomalies map near-surface plutonic rocks associated with porphyry systems. Magnetic susceptibility measurements on outcrops of hydrothermally altered rocks indicate magnetite content decreases upward and outward from the source intrusions where magnetic anomaly lows are observed over the lithocaps. The resistivity maps highlight hydrothermal alteration as resistivity lows with exception being rocks having propylitic alteration. Quantitative resistivity models show low resistivity zones with an apparent thickness around 50–150 m beneath quartz-sericite-pyrite veins interpreted to be the result of supergene processes that may continue today, and the calculated magnetic source depths occur near the top of this zone. The resistivity models also show rocks having propylitic, silicic, and quartz-alunite-pyrophyllite assemblages exhibit high resistivity with depth, and argillic alteration assemblages had high resistivity due to high quartz content. This integrated approach presented in a three-dimensional environment provides guidance when exploring for porphyry copper systems in less exposed terrains.

Colorado↗

USGS2019

Geological and geophysical data for a three-dimensional view—Inside the San Juan and Silverton Calderas, Southern Rocky Mountains Volcanic Field, Silverton, Colorado

Introduction The San Juan-Silverton caldera complex located near Silverton, Colorado, in the Southern Rocky Mountains volcanic field is an ideal natural laboratory for furthering the understanding of shallow-to-deep volcanic-related mineral systems. Recent advances in geophysical data processing and three-dimensional (3D) model construction will help to characterize shallow properties important for understanding surface water and groundwater quality issues and will also improve knowledge of deep geological structures that may have been conduits for hydrothermal fluids that formed mineral deposits. The study has general applications to mineral resource assessments in other areas of the world and to identifying possible groundwater flow paths and associated geochemistry important in abandoned mine lands cleanup. Silverton, Colorado, is the site of a spectacular succession of igneous rocks that formed beginning about 35 million years ago (Ma). Base metals (copper, lead, and zinc) and precious metals (silver and gold) mined from the late 1870s to 1991 owe their existence to a 25-million-year cycle of igneous activity. The presence of economic, base, and precious metal deposits within a complex geological setting were largely responsible for stimulating studies by the U.S. Geological Survey (USGS) conducted during the early 20th century. The focus of investigations in the late 20th and 21st centuries have broadened in scope to include abandoned mine lands (AML) investigations. The legacy of hard rock mining in headwater catchment areas caused environmental challenges for local communities and downstream water resource users. The Gold King Mine, located a few kilometers north of Silverton, illustrates the potential environmental effects of abandoned mines. On August 5, 2015, during reclamation efforts at the Gold King Mine, a breach of collapsed workings sent approximately 3 million gallons of acidic and metal-rich mine water into the upper Animas River, a tributary to the Colorado River Basin. Mining-related sources of metals and acidity add to geological sources of metals in surface water and groundwater. Weathering processes of altered and mineralized rock have been a source of acid rock drainage that have been ongoing for millennia.

Colorado↗

USGS2019

Monitoring brine contamination using time-lapse airborne electromagnetic surveys, East Poplar Oil Field, Montana

Integrated geophysical and water-quality studies have been used to delineate areas of saline groundwater in shallow unconfined aquifers underlying the East Poplar oil field in northeastern Montana. In 2004, a RESOLVE survey was conducted over the oil field to identify high conductivity areas potentially associated with brine contamination and to map the shale unit comprising the base of aquifer. In 2014, a SkyTEM 301 survey was conducted over the same flight paths to examine possible changes in groundwater conductivity and to complete the base-of-aquifer mapping where the depth of investigation from the 2004 survey was inadequate. We present a preliminary comparison between the 2004 and 2014 surveys.

Montana↗

USGS2018

Three-dimensional geophysical mapping of shallow water saturated altered rocks at Mount Baker, Washington: Implications for slope stability

Water-saturated hydrothermal alteration reduces the strength of volcanic edifices, increasing the potential for catastrophic sector collapses that can lead to far traveled and destructive debris flows. Intense hydrothermal alteration significantly lowers the resistivity and magnetization of volcanic rock and therefore hydrothermally altered rocks can be identified with helicopter electromagnetic and magnetic measurements. Geophysical models constrained by rock properties and geologic mapping show that intensely altered rock is restricted to two small (500 m diameter), >150 m thick regions around Sherman Crater and Dorr Fumarole Field at Mount Baker, Washington. This distribution of alteration contrasts with much thicker and widespread alteration encompassing the summits of Mounts Adams and Rainier prior to the 5600 year old Osceola collapse, which is most likely due to extreme erosion and the limited duration of summit magmatism at Mount Baker. In addition, the models suggest that the upper ~300 m of rock contains water which could help to lubricate potential debris flows. Slope stability modeling incorporating the geophysically modeled distribution of alteration and water indicates that the most likely and largest (~0.1 km 3 ) collapses are from the east side of Sherman Crater. Alteration at Dorr Fumarole Field raises the collapse hazard there, but not significantly because of its lower slope angles. Geochemistry and analogs from other volcanoes suggest a model for the edifice hydrothermal system.

Washington↗

USGS2017

Helicopter electromagnetic data map ice thickness at Mount Adams and Mount Baker, Washington, USA

Ice-thickness measurements critical for flood and mudflow hazard studies are very sparse on Cascade Range (North America) volcanoes. Helicopter electromagnetic (HEM) data collected to detect hydrothermal alteration are used to determine ice thickness over portions of Mount Baker and Mount Adams volcanoes. A laterally continuous inversion method provides good estimates of ice <100 m thick over water-saturated and altered regions where the resistivity of the basement is <200 Ωm. For areas with ice overlying fresh, resistive rocks with small resistivity contrasts between ice and rock, ice thickness is not well resolved. The ice thicknesses derived from HEM data are consistent with the previous drillhole data from Mount Adams and radar data from both volcanoes, with mean thicknesses of 57 m for Mount Adams and 68 m for Mount Baker. The thickest ice on Mount Baker rests on the gentle lower slopes whereas the thickest ice at Mount Adams lies on the flat summit. Ice volume calculations suggest that Mount Baker contains ∽710 × 10 6 m 3 of ice in the HEM survey area, with a crude estimate of ∽1800 × 10 6 m 3 for the entire volcano. Ice volume on Mount Adams is 65 × 10 6 m 3 in parts of the HEM survey area and ∽200 × 10 6 m 3 overall.

Washington↗

USGS2012

Helicopter electromagnetic survey of the Model Land Area, Southeastern Miami-Dade County, Florida

This report describes a helicopter electromagnetic survey flown over the Model Land Area in southeastern Miami-Dade County, Florida, to map saltwater intrusion in the Biscayne aquifer. The survey, which is located south and east of Florida City, Florida, covers an area of 115 square kilometers with a flight-line spacing of 400 meters. A five-frequency, horizontal, coplanar bird with frequencies ranging from 400 to 100,000 Hertz was used. The data were interpreted using differential resistivity analysis and inversion to produce cross sections and resistivity depth-slice maps. The depth of investigation is as deep as 100 meters in freshwater-saturated portions of the Biscayne aquifer and the depth diminishes to about 50 meters in areas that are intruded by saltwater. The results compare favorably with ground-based, time-domain electromagnetic soundings and induction logs from observation wells in the area. The base of a high-resistivity, freshwater-saturated zone mapped in the northern 2 kilometers of the survey area corresponds quite well with the base of the surficial aquifer that has been determined by drilling. In general, saltwater in the survey area extends 9 to 12 kilometers inland from the coast; however, there is a long nose of saltwater centered along the Card Sound Road Canal that extends 15 kilometers inland. The cause of this preferential intrusion is likely due to uncontrolled surface flow along the canal and subsequent leakage of saltwater into the aquifer. Saltwater also extends farther inland in the area between U.S. Highway 1 and Card Sound Road than it does to the west of this area. Until 1944, a railroad grade occupied the current location of U.S. Highway 1. Borrow ditches associated with the railroad grade connected to Barnes Sound and allowed saltwater to flow during droughts and storm surges to within a few kilometers of Florida City. Relicts of this saltwater that settled to the bottom of the Biscayne aquifer can be seen in the helicopter electromagnetic data. The area to the west of U.S. Highway 1 is more resistive in the upper 10 meters than the area to the east of the road; this reflects the influence of surface-water flows that are blocked by U.S. Highway 1. Between Card Sound Road and U.S. Highway 1, resistivities are slightly lower compared to adjacent areas. In the southern portion of the survey area, the surficial aquifer underlying the Biscayne aquifer is more resistive; this indicates that it contains fresher water than that found at the base of the Biscayne aquifer.

Florida↗

USGS2011

Helicopter magnetic and electromagnetic surveys at Mounts Adams, Baker and Rainier, Washington: implications for debris flow hazards and volcano hydrology

High‐resolution helicopter magnetic and electromagnetic (HEM) data flown over the rugged, ice‐covered Mt. Adams, Mt. Baker and Mt. Rainier volcanoes (Washington), reveal the distribution of alteration, water and ice thickness essential to evaluating volcanic landslide hazards. These data, combined with geological mapping and rock property measurements, indicate the presence of appreciable thicknesses (>500 m) of water‐saturated hydrothermally altered rock west of the modern summit of Mount Rainier in the Sunset Amphitheater region and in the central core of Mount Adams north of the summit. Alteration at Mount Baker is restricted to thinner (<300 m) zones beneath Sherman Crater and the Dorr Fumarole Fields. The EM data identified water‐saturated rocks from the surface to the detection limit (100–200 m) in discreet zones at Mt. Rainier and Mt Adams and over the entire summit region at Mt. Baker. The best estimates for ice thickness are obtained over relatively low resistivity (<800 ohm‐m) ground for the main ice cap on Mt. Adams and over most of the summit of Mt. Baker. The modeled distribution of alteration, pore fluids and partial ice volumes on the volcanoes helps identify likely sources for future alteration‐related debris flows, including the Sunset Amphitheater region at Mt. Rainier, steep cliffs at the western edge of the central altered zone at Mount Adams and eastern flanks of Mt. Baker.

Washington↗

USGS2011

Airborne electromagnetic and magnetic geophysical survey data of the Yukon Flats and Fort Wainwright areas, central Alaska, June 2010

In June 2010, the U.S. Geological Survey conducted airborne electromagnetic and magnetic surveys of the Yukon Flats and Fort Wainwright study areas in central Alaska. These data were collected to estimate the three-dimensional distribution of permafrost at the time of the survey. These data were also collected to evaluate the effectiveness of these geophysical methods at mapping permafrost geometry and to better define the physical properties of the subsurface in discontinuous permafrost areas. This report releases digital data associated with these surveys. Inverted resistivity depth sections are also provided in this data release, and data processing and inversion methods are discussed.

Open-File Report↗

USGS2011

Investigation of the potential for concealed base-metal mineralization at the Drenchwater Creek Zn-Pb-Ag occurrence, northern Alaska, using geology, reconnaissance geochemistry, and airborne electromagnetic geophysics

In 2005, the U.S. Geological Survey, Bureau of Land Management, and State of Alaska cooperated on an investigation of the mineral potential of a southern part of the National Petroleum Reserve in Alaska, Howard Pass quadrangle, to provide background information for future land-use decisions. The investigation incorporated an airborne electromagnetic (EM) survey covering 1,500 mi 2 (~3,900 km 2 ), including flight lines directly over the Drenchwater Creek sediment-hosted Zn-Pb-Ag occurrence, the largest known base-metal occurrence in the survey area. Samples from the mineralized outcrop and rubblecrop contain metal concentrations that can exceed 11 percent Zn+Pb, with appreciable amounts of Ag. Soil samples with anomalous Pb concentrations are distributed near the sulfide-bearing outcrops and along a >2.5 km zone comprising mudstone, shale, and volcanic rocks of the Kuna Formation. No drilling has taken place at the Drenchwater occurrence, so alternative data sources (for example, geophysics) are especially important in assessing possible indicators of mineralization. Data from the 2005 electromagnetic survey define the geophysical character of the rocks at Drenchwater and, in combination with geological and surface-geochemical data, can aid in assessing the possible shallow (up to about 50 m), subsurface lateral extent of base-metal sulfide accumulations at Drenchwater. A distinct >3-km-long electromagnetic conductive zone (observed in apparent resistivity maps) coincides with, and extends further westward than, mineralized shale outcrops and soils anomalously high in Pb concentrations within the Kuna Formation; this conductive zone may indicate sulfide-rich rock. Models of electrical resistivity with depth, generated from inversion of electromagnetic data, which provide alongflight-line conductivity-depth profiles to between 25 and 50 m below ground surface, show that the shallow subsurface conductive zone occurs in areas of known mineralized outcrops and thins to the east. Broader, more conductive rock along the western ~1 km of the geophysical anomaly does not reach ground surface. These data suggest that the Drenchwater deposit is more extensive than previously thought. The application of inversion modeling also was applied to another smaller geochemical anomaly in the Twistem Creek area. The results are inconclusive, but they suggest that there may be a local conductive zone, possibly due to sulfides.

Professional Paper↗

USGS2008

Geophysical characterization of the American River levees, Sacramento, California, with electromagnetics, capacitively coupled resistivity, and DC resistivity

A geophysical characterization of a portion of American River levees in Sacramento, California was conducted in May, 2007. Targets of interest included the distribution and thickness of sand lenses that underlie the levees and the depth to a clay unit that underlies the sand. The concern is that the erosion of these sand lenses can lead to levee failure in highly populated areas of Sacramento. DC resistivity (Geometric’s OhmMapper and Advanced Geosciences, Inc.’s SuperSting R8 systems) and electromagnetic surveys (Geophex’s GEM-2) were conducted over a 6 mile length of the levee on roads and bicycle and horse trails. 2-D inversions were conducted on all the geophysical data. The OhmMapper and SuperSting surveys produced consistent inversion results that delineated potential sand and clay units. GEM-2 apparent resistivity data were consistent with the DC inversion results. However, the GEM-2 data could not be inverted due to low electromagnetic response levels, high ambient electromagnetic noise, and large system drifts. While this would not be as large a problem in conductive terrains, it is a problem for a small induction number electromagnetic profiling system such as the GEM-2 in a resistive terrain (the sand lenses). An integrated interpretation of the geophysical data acquired in this investigation is presented in this report that includes delineation of those areas consisting of predominantly sand and those areas consisting predominantly of clay. In general, along most of this part of the American River levee system, sand lenses are located closest to the river and clay deposits are located further away from the river. The interpreted thicknesses of the detected sand deposits are variable and range from 10 ft up to 60 ft. Thus, despite issues with the GEM-2 inversion, this geophysical investigation successfully delineated sand lenses and clay deposits along the American River levee system and the approximate depths to underlying clay zones. The results of this geophysical investigation should help the USACE to maintain the current levee system while also assisting the designers and planners of levee enhancements with the knowledge of what is to be expected from the near-surface geology and where zones of concern may be located.

California↗

USGS2002

Helicopter electromagnetic data from Everglades National Park and surrounding areas, Florida: Collected 9-14 December 1994

This report describes helicopter electromagnetic (HEM) data that were collected over portion of Everglades National Park and surrounding areas in south Florida. The survey was flown 9-14 December 1994. The original data set processed by the contractor, Dighem, are provided as an ASCII, xyz flight-line file. Apparent resistivity grids of the generated from the original data set and JPEG images of these grids are also provided. The data have been corrected by the U.S. Geological Survey to remove the effects of calibration errors and bird-height uncertainty. The corrected data set is included in this report as flight-line data only.

Florida↗

USGS1999

Results of time-domain electromagnetic soundings in Everglades National Park, Florida

This report describes the collection, processing, and interpretation of time-domain electromagnetic soundings from Everglades National Park. The results are used to locate the extent of seawater intrusion in the Biscayne aquifer and to map the base of the Biscayne aquifer in regions where well coverage is sparse. The data show no evidence of fresh, ground-water flows at depth into Florida Bay.

Florida↗