USGS ScienceSearch

Geology topics

M. R. Palmer

Publications and source records attributed to M. R. Palmer.

7 recordsLinked to original sources

The boron isotope systematics of Icelandic geothermal waters: 1. Meteoric water charged systems

We have measured the boron isotope composition and boron and chloride concentrations of 27 Icelandic geothermal fluids from both high- and low-temperature systems. The δ 11 B values range from −6.7‰ in the Krafla system, to +25.0‰ in a warm spring from the Southern Lowlands. In addition, we have also determined the δ 11 B values of basaltic glass from Nesjavellir (−5.3 ± 1.4‰) and travertine from Snaefellsnes (−22 ± 0.5‰). The B isotope and Cl/B systematics of the high-temperature systems are dominated by the composition of the local basalts. The lower temperature systems show evidence for mixing with B and Cl of a marine origin, together with some uptake of B into secondary mineral phases. The data from the Snaefellsnes geothermal system indicate that the fluids have undergone interaction with basalts that have undergone significant low-temperature alteration by seawater.

Geochimica et Cosmochimica Acta

Boron isotope systematics of tourmaline formation in the Sullivan Pb-Zn-Ag deposit, British Columbia, Canada

We report here the results of 54 boron isotope analyses of tourmaline associated with the giant Sullivan Pb-Zn-Ag deposit in southeastern British Columbia, Canada. The ??11B values range from -11.1 to -2.9???, which is almost as great as the range found worldwide in tourmalines from 33 massive sulfide deposits and tourmalinites in dominantly clastic metasedimentary terranes. The major control on the overall ??11B values of the Sullivan tourmalinites is the boron source. Potential controls over the large range of the data also include: (1) differences in formation temperatures of the tourmalinites, (2) different stages of tourmaline formation, (3) variations in the proportions of dissolved boron incorporated into the tourmaline (Rayleigh fractionation), (4) seawater entrainment, and (5) post-depositional metamorphism. The boron isotope data at Sullivan are consistent with boron derivation from leaching of footwall clastic sediments. However, the great abundance of tourmaline in the Sullivan deposit suggests that the local clastic sediments were not the sole source of boron, and we argue that non-marine evaporites, buried deep below the orebody, are the most viable source of this additional boron. It is likely that some of the variation in tourmaline ??11B values reflect mixing of boron from these two sources. Comparison of the potential effects of these controls with geologic and other geochemical evidence suggests that major causes for the wide range of ??11B values measured at Sullivan are seawater entrainment and Rayleigh fractionation, although in places, post-depositional alteration and thermal metamorphism were important in determining ??11B values of some of the recrystallized tourmalinites.

Chemical Geology

Mn-rich ilmenite from the Sullivan Pb-Zn-Ag deposit, British Columbia

Electron-microprobe analyses of 76 ilmenite grains from 13 locations in the footwall, hanging wall, and ore zone of the Sullivan Pb-Zn-Ag deposit, Kimberley, British Columbia, and from regionally developed tourmalinite of the Middle Proterozoic Aldridge Formation show two different modes that reflect two stages of formation. The first stage of ilmenite formation occurred as a result of greenschist-facies regional metamorphism, which also produced the associated Mn-rich garnet. Ilmenite from this stage forms inclusions within garnet and has a relatively low Mn content (<5.5 wt% MnO), owing to the preferential partitioning of Mn into the garnet. A second metamorphic or hydrothermal event resulted in the formation of ilmenite-bearing veinlets (+ chlorite + quartz + sulfides) that cut garnet and associated biotite. This latter type of ilmenite has a higher Mn content (up to 16.7 wt% MnO) that reflects remobilization of Mn within the local environment. Both types of Mn-rich ilmenite are considered to be derived from Mn originally concentrated in pools of dense brine that formed during synsedimentary, submarine-exhalative mineralization.

Canadian Mineralogist

Feruvite from the Sullivan Pb-Zn-Ag deposit, British Columbia

Feruvite, an uncommon Ca- and Fe2+-rich tourmaline species, has been discovered in the footwall of the Sullivan Pb-Zn-Ag deposit (British Columbia) near gabbro sills and dikes. Its chemical composition varies according to occurrence: feruvite from the shallow footwall has lower Ca, higher Al, and higher X-site vacancies than that from the deep footwall. The major chemical substitution involved in the feruvite is the exchange vector CaMgO???-1Al-1(OH)-1. The most important factor controlling feruvite formation at Sullivan is likely the reaction of Fe-rich hydrothermal fluids with Ca-rich minerals in gabbro and host rocks. This reaction led to the breakdown of Ca-rich minerals (plagioclase and hornblende), with release of Ca to solution and its incorporation into feruvite. This process probably postdated the main stages of formation of fine-grained, intermediate schorl-dravite in the tourmalinite pipe in the footwall, and is attributed to postore intrusion of gabbro and associated albite-chlorite-pyrite alteration.

Canadian Mineralogist

Origin and significance of tourmaline-rich rocks in the Broken Hill district, Australia

Tourmaline-rich rocks are widespread minor lithologies within the Early Proterozoic Willyama Supergroup in the Broken Hill district, Australia. Tourmaline concentrations occur in strata-bound and local stratiform tourmalinites, clastic metasedimentary rocks, quartz-gahnite lode rocks, stratiform Pb-Zn-Ag sulfide ores, garnet quartzites, strata-bound scheelite deposits, quartz-tourmaline nodules, discordant quartz veins, and granitic pegmatites. Most of the tourmaline-rich rocks are within the Broken Hill Group that hosts the main Pb-Zn-Ag ores.At the Globe mine along the northeast end of the main lodes, tourmalinites are closely associated with Pb-Zn-Ag mineralization and in places are interbedded with Mn-rich garnet quartzites. Galena and other ore minerals occur locally in the cores of recrystallized tourmaline grains in these tourmalinites, indicating that tourmaline and sulfides were present together prior to deformation and high-grade metamorphism. Electron microprobe analyses of tourmalines intergrown with Fe sulfides at the Globe mine show Mg-rich compositions relative to tourmalines in sulfide-free assemblages from the same area, suggesting early (premetamorphic) introduction of boron and Mg enrichment of tourmaline by sulfide-silicate reactions during metamorphism.Combined field and geochemical data indicate that the district tourmalinites represent normal clastic sediments that were metasomatically altered by boron-rich hydrothermal fluids at or below the sediment-water interface. Whole-rock chemical analyses of 33 tourmaline-rich rocks show linear trends of data for major and trace elements that closely resemble the trends observed for unmineralized elastic metasedimentary rocks of the district. Average Fe/Al, Mg/Al, Na/Al, and Ti/Al molar ratios of the tourmaline-rich rocks and clastic metasediments are very similar; the average K/Al molar ratio of the tourmaline-rich rocks is significantly lower than that of the clastic metasediments, reflecting the loss of K during tourmalinite formation. Chondrite-normalized patterns of rare earth elements (REE) in the quartz-rich tourmalinites are generally similar to those of the clastic metasediments, except for minor depletions of light REE; local positive and negative Ce anomalies suggest tourmalinite formation in the presence of seawater or a seawater-derived pore fluid. The geochemical data imply relative immobility of Al, Ti, Cr, and heavy REE during hydrothermal alteration and later metamorphism. Boron isotope analyses of 52 tourmaline separates show a total range of delta 11 B values from -26.8 to -17.0 per mil. Fine-grained, euhedral, nonpoikilitic tourmalines from tourmalinites in the andalusite-muscovite zone in the northern part of the district (e.g., Black Prince mine) have delta 11 B values from -21 to -17 per mil, whereas coarse granoblastic and poikilo-blastic tourmalines from the sillimanite and two-pyroxene granulite zones in the southern part of the district (e.g., Globe mine) have delta 11 B values of-24 to -19 per mil. Tourmalines in strongly retrogressed tourmalinites have delta 11 B values from about -27 to -20 per mil. The observed variations in delta 11 B are consistent with prograde and retrograde metamorphic fractionation of boron isotopes, in which the fluid phase is preferentially enriched in the heavier isotope ( 11 B). Premetamorphic hydrothermal fluids that deposited the Black Prince tourmalinites had delta 11 B values of-8 to -5 per mil at 200 degrees to 300 degrees C, suggesting a boron source from nonmarine evaporite borates.Tourmalinites in the Broken Hill district apparently formed by the same submarine hydrothermal processes as the main Pb-Zn-Ag lodes and the siliceous ferromanganese protoliths of the garnet quartzites. In our model, the hydrothermal system(s) acquired abundant boron by leaching evaporitic borates within the Thackaringa Group, the stratigraphic sequence that underlies the Broken Hill Group and most of the tourmaline concentrations. We suggest that evaporites of the Thackaringa Group provided a source of readily extractable boron for formation of the tourmalinites and also the source of the fluoride, sulfur, and perhaps the carbonate in the main lodes; such evaporites may have been critical for increased metal chloride complexing and transport necessary for deposition of the high-grade Pb-Zn-Ag ores. The Broken Hill deposit may have formed contemporaneously with the Mount Isa and McArthur River Pb-Zn-Ag deposits in similar evaporite-bearing sequences during widespread Early Proterozoic continental rifting.

Economic Geology

Boron isotopic composition of tourmaline from massive sulfide deposits and tourmalinites

Boron isotope ratios (11B/10B) have been measured on 60 tourmaline separates from over 40 massive sulfide deposits and tourmalinites from a variety of geologic and tectonic settings. The coverage of these localities is global (5 continents) and includes the giant ore bodies at Kidd Creek and Sullivan (Canada), Broken Hill (Australia), and Ducktown (USA). Overall, the tourmalines display a wide range in ??11B values from -22.8 to +18.3??? Possible controls over the boron isotopic composition of the tourmalines include: 1) composition of the boron source, 2) regional metamorphism, 3) water/rock ratios, 4) seawater entrainment, 5) temperature of formation, and 6) secular variations in seawater ??11B. The most significant control appears to be the composition of the boron source, particularly the nature of footwall lithologies; variations in water/ rock ratios and seawater entrainment are of secondary importance. The boron isotope values seem especially sensitive to the presence of evaporites (marine and non-marine) and carbonates in source rocks to the massive sulfide deposits and tourmalinites. ?? 1989 Springer-Verlag.

Contributions to Mineralogy and Petrology

Boron isotope evidence for the involvement of non-marine evaporites in the origin of the Broken Hill ore deposits

Identifying the palaeogeographic setting and mode of origin of stratabound ore deposits can be difficult in high-grade metamorphic terranes, where the effects of metamorphism may obscure the nature of the protoliths. Here we report boron isotope data for tourmalines from the early Proterozoic Broken Hill block, in Australia, which hosts giant lead-zinc-silver sulphide deposits. With one exception the 11 B/ 10 B ratios are lower than those for all other tourmalines from massive sulphide deposits and tour-malinites elsewhere in the world. We propose that these low ratios reflect leaching of boron from non-marine evaporitic borates by convecting hydrothermal fluids associated with early Proterozoic continental rifting. A possible modern analogue is the Salton Sea geothermal field in California.

Nature