Geology topics

L.M. Liberty

Publications and source records attributed to L.M. Liberty.

7 recordsLinked to original sources

USGS2012

The western limits of the Seattle fault zone and its interaction with the Olympic Peninsula, Washington

We present evidence that the Seattle fault zone of Washington State extends to the west edge of the Puget Lowland and is kinemati-cally linked to active faults that border the Olympic Massif, including the Saddle Moun-tain deformation zone. Newly acquired high-resolution seismic reflection and marine magnetic data suggest that the Seattle fault zone extends west beyond the Seattle Basin to form a >100-km-long active fault zone. We provide evidence for a strain transfer zone, expressed as a broad set of faults and folds connecting the Seattle and Saddle Mountain deformation zones near Hood Canal. This connection provides an explanation for the apparent synchroneity of M7 earthquakes on the two fault systems ~1100 yr ago. We redeﬁ ne the boundary of the Tacoma Basin to include the previously termed Dewatto basin and show that the Tacoma fault, the southern part of which is a backthrust of the Seattle fault zone, links with a previously unidentiﬁ ed fault along the western margin of the Seattle uplift. We model this north-south fault, termed the Dewatto fault, along the western margin of the Seattle uplift as a low-angle thrust that initiated with exhu-mation of the Olympic Massif and today accommodates north-directed motion. The Tacoma and Dewatto faults likely control both the southern and western boundaries of the Seattle uplift. The inferred strain trans-fer zone linking the Seattle fault zone and Saddle Mountain deformation zone deﬁ nes the northern margin of the Tacoma Basin, and the Saddle Mountain deformation zone forms the northwestern boundary of the Tacoma Basin. Our observations and model suggest that the western portions of the Seattle fault zone and Tacoma fault are com-plex, require temporal variations in principal strain directions, and cannot be modeled as a simple thrust and/or backthrust system.

Washington↗

USGS2012

Hotspot: the Snake River Geothermal Drilling Project--initial report

The Snake River volcanic province (SRP) overlies a thermal anomaly that extends deep into the mantle; it represents one of the highest heat flow provinces in North America. The primary goal of this project is to evaluate geothermal potential in three distinct settings: (1) Kimama site: inferred high sub-aquifer geothermal gradient associated with the intrusion of mafic magmas, (2) Kimberly site: a valley-margin setting where surface heat flow may be driven by the up-flow of hot fluids along buried caldera ringfault complexes, and (3) Mountain Home site: a more traditional fault-bounded basin with thick sedimentary cover. The Kimama hole, on the axial volcanic zone, penetrated 1912 m of basalt with minor intercalated sediment; no rhyolite basement was encountered. Temperatures are isothermal through the aquifer (to 960 m), then rise steeply on a super-conductive gradient to an estimated bottom hole temperature of ~98°C. The Kimberly hole is on the inferred margin of a buried rhyolite eruptive center, penetrated rhyolite with intercalated basalt and sediment to a TD of 1958 m. Temperatures are isothermal at 55-60°C below 400 m, suggesting an immense passive geothermal resource. The Mountain Home hole is located above the margin of a buried gravity high in the western SRP. It penetrates a thick section of basalt and lacustrine sediment overlying altered basalt flows, hyaloclastites, and volcanic sediments, with a TD of 1821 m. Artesian flow of geothermal water from 1745 m depth documents a power-grade resource that is now being explored in more detail. In-depth studies continue at all three sites, complemented by high-resolution gravity, magnetic, and seismic surveys, and by downhole geophysical logging.

Snake River↗

USGS2011

Recent faulting in western Nevada revealed by multi-scale seismic reflection

The main goal of this study is to compare different reflection methods used to image subsurface structure within different physical environments in western Nevada. With all the methods employed, the primary goal is fault imaging for structural information toward geothermal exploration and seismic hazard estimation. We use seismic CHIRP (a swept-frequency marine acquisition system), weight drop (an accelerated hammer source), and two different vibroseis systems to characterize fault structure. We focused our efforts in the Reno metropolitan area and the area within and surrounding Pyramid Lake in northern Nevada. These different methods have provided valuable constraints on the fault geometry and activity, as well as associated fluid movement. These are critical in evaluating the potential for large earthquakes in these areas, and geothermal exploration possibilities near these structures.

Nevada↗

USGS2009

Neotectonic analysis of upper klamath lake, oregon: New insights from seismic reflection data

We present marine high-resolution seismic reflection data from Upper Klamath Lake, Oregon, to discern the underlying structure and estimate Quaternary slip rates in this actively extending Basin and Range system. The sediment patterns and structures imaged on our seismic profiles reveal a complex geologic system that reflects a changing climate record, shallow water conditions, growth faulting, contrasting sediment sources, and high slip rates. We observe that Upper Klamath Lake is a sedimentsaturated environment, and sediment accumulation rates are therefore controlled by basin subsidence rather than sediment supply. Published slip rates for Holocene extension are greater than our determined late Quaternary slip rates, assuming reasonable rates of deposition. The apparent increased Holocene fault-slip rates may be in part an artifact of long recurrence intervals between major earthquakes, with recent seismicity accommodating long-term strain. The quantity of observed faults below the lake is at least an order of magnitude greater than those mapped outside the lake, suggesting that many hidden faults throughout the region may be unaccounted for when estimating Basin and Range extension rates. Copyright ?? 2009 The Geological Society of America. All rights reserved.

Special Paper of the Geological Society of America↗

USGS2008

Structure of the eastern Seattle fault zone, Washington state: New insights from seismic reflection data

We identify and characterize the active Seattle fault zone (SFZ) east of Lake Washington with newly acquired seismic reflection data. Our results focus on structures observed in the upper 1 km below the cities of Bellevue, Sammamish, Newcastle, and Fall City, Washington. The SFZ appears as a broad zone of faulting and folding at the southern boundary of the Seattle basin and north edge of the Seattle uplift. We interpret the Seattle fault as a thrust fault that accommodates north-south shortening by forming a fault-propagation fold with a forelimb breakthrough. The blind tip of the main fault forms a synclinal growth fold (deformation front) that extends at least 8 km east of Vasa Park (west side of Lake Sammamish) and defines the south edge of the Seattle basin. South of the deformation front is the forelimb break-through fault, which was exposed in a trench at Vasa Park. The Newcastle Hills anticline, a broad anticline forming the north part of the Seattle uplift east of Lake Washington, is interpreted to lie between the main blind strand of the Seattle fault and a backthrust. Our profiles, on the northern limb of this anticline, consistently image north-dipping strata. A structural model for the SFZ east of Lake Washington is consistent with about 8 km of slip on the upper part of the Seattle fault, but the amount of motion is only loosely constrained.

Bulletin of the Seismological Society of America↗

USGS2000

New aeromagnetic data reveal large strike-slip (?) faults in the Northern Willamette Valley, Oregon

High-resolution aeromagnetic data from the northern Willamette Valley, Oregon, reveal large, northwest-striking faults buried beneath Quaternary basin sediments. Several faults known from geologic mapping are well defined by the data and appear to extend far beyond their mapped surface traces. The Mount Angel fault, the likely source of the Richter magnitude (M1) 5.6 earthquake in 1993, is at least 55 km long and may be connected in the subsurface with the Gales Creek fault 25 km farther northwest. Northeast of the Mount Angel fault, a 60-km-long, northwest-striking anomaly may represent a previously unrecognized dextral-slip fault beneath the towns of Canby and Molalla. Vertical offsets along the Mount Angel fault increase with depth, indicating a long history of movement for the fault. Dominantly northwest- trending, relatively straight faults, consistent stepover geometries, offset magnetic anomalies and earthquake focal mechanisms suggest that these faults collectively accommodate significant dextral slip. The 1993 earthquake may have occurred on a left-stepping restraining bend along the Mount Angel-Gales Creek fault zone.

Oregon↗

USGS1999

Integration of high-resolution seismic and aeromagnetic data for earthquake hazards evaluations: An example from the Willamette Valley, Oregon

Aeromagnetic and high-resolution seismic reflection data were integrated to place constraints on the history of seismic activity and to determine the continuity of the possibly active, yet largely concealed Mount Angel fault in the Willamette Valley, Oregon. Recent seismic activity possibly related to the 20-km-long fault includes a swarm of small earthquakes near Woodburn in 1990 and the magnitude 5.6 Scotts Mills earthquake in 1993. Newly acquired aeromagnetic data show several large northwest-trending anomalies, including one associated with the Mount Angel fault. The magnetic signature indicates that the fault may actually extend 70 km across the Willamette Valley to join the Newberg and Gales Creek faults in the Oregon Coast Range. We collected 24-fold high-resolution seismic reflection data along two transects near Woodburn, Oregon, to image the offset of the Miocene-age Columbia River Basalts ( CRB ) and overlying sediments at and northwest of the known mapped extent of the Mount Angel fault. The seismic data show a 100-200-m offset in the CRB reflector at depths from 300 to 700 m. Folded or offset sediments appear above the CRB with decreasing amplitude to depths as shallow as were imaged (approximately 40 m). Modeling experiments based on the magnetic data indicate, however, that the anomaly associated with the Mount Angel fault is not caused solely by an offset of the CRB and overlying sediments. Underlying magnetic sources, which we presume to be volcanic rocks of the Siletz terrane, must have vertical offsets of at least 500 m to fit the observed data. We conclude that the Mount Angel fault appears to have been active since Eocene age and that the Gales Creek, Newberg, and Mount Angel faults should be considered a single potentially active fault system. This fault, as well as other parallel northwest-trending faults in the Willamette Valley, should be considered as risks for future potentially damaging earthquakes.

Oregon↗