Geology topics

L. Pellerin

Publications and source records attributed to L. Pellerin.

7 recordsLinked to original sources

USGS2008

Understanding the relationship between audiomagnetotelluric data and models, and borehole data in a hydrological environment

Audiomagnetotelluric (AMT) data and resulting models are analyzed with respect to geophysical and geological borehole logs in order to clarify the relationship between the two methodologies of investigation of a hydrological environment. Several profiles of AMT data collected in basins in southwestern United States are being used for groundwater exploration and hydrogeological framework studies. In a systematic manner, the AMT data and models are compared to borehole data by computing the equivalent one-dimensional AMT model and comparing with the two-dimensional (2-D) inverse AMT model. The spatial length is used to determine if the well is near enough to the AMT profile to quantify the relationship between the two datasets, and determine the required resolution of the AMT data and models. The significance of the quality of the borehole data when compared to the AMT data is also examined.

Conference Paper↗

USGS2008

Advancing process‐based watershed hydrological research using near‐surface geophysics: A vision for, and review of, electrical and magnetic geophysical methods

We want to develop a dialogue between geophysicists and hydrologists interested in synergistically advancing process based watershed research. We identify recent advances in geophysical instrumentation, and provide a vision for the use of electrical and magnetic geophysical instrumentation in watershed scale hydrology. The focus of the paper is to identify instrumentation that could significantly advance this vision for geophysics and hydrology during the next 3–5 years. We acknowledge that this is one of a number of possible ways forward and seek only to offer a relatively narrow and achievable vision. The vision focuses on the measurement of geological structure and identification of flow paths using electrical and magnetic methods. The paper identifies instruments, provides examples of their use, and describes how synergy between measurement and modelling could be achieved. Of specific interest are the airborne systems that can cover large areas and are appropriate for watershed studies. Although airborne geophysics has been around for some time, only in the last few years have systems designed exclusively for hydrological applications begun to emerge. These systems, such as airborne electromagnetic (EM) and transient electromagnetic (TEM), could revolutionize hydrogeological interpretations. Our vision centers on developing nested and cross scale electrical and magnetic measurements that can be used to construct a three‐dimensional (3D) electrical or magnetic model of the subsurface in watersheds. The methodological framework assumes a ‘top down’ approach using airborne methods to identify the large scale, dominant architecture of the subsurface. We recognize that the integration of geophysical measurement methods, and data, into watershed process characterization and modelling can only be achieved through dialogue. Especially, through the development of partnerships between geophysicists and hydrologists, partnerships that explore how the application of geophysics can answer critical hydrological science questions, and conversely provide an understanding of the limitations of geophysical measurements and interpretation.

Hydrological Processes↗

USGS2008

SAGE celebrates 25 years of learning geophysics by doing geophysics

The increasing world demand and record-high costs for energy and mineral resources, along with the attendant environmental and climate concerns, have escalated the need for trained geophysicists to unprecedented levels. This is not only a national need; it's a critical global need. As Earth scientists and educators we must seriously ask if our geophysics pipeline can adequately address this crisis. One program that has helped to answer this question in the affirmative for 25 years is SAGE (Summer of Applied Geophysical Experience). SAGE continues to develop with new faculty, new collaborations, and additional ways to support student participation during and after SAGE. ?? 2008 Society of Exploration Geophysicists.

Leading Edge (Tulsa, OK)↗

USGS2007

Crustal structure of Wrangellia and adjacent terranes inferred from geophysical studies along a transect through the northern Talkeetna Mountains

Recent investigations of the Talkeetna Mountains in south-central Alaska were undertaken to study the region's framework geophysics and to reinterpret structures and crustal composition. Potential field (gravity and magnetic) and magnetotelluric (MT) data were collected along northwest-trending profiles as part of the U.S. Geological Survey's Talkeetna Mountains transect project. The Talkeetna Mountains transect area comprises eight 1:63,360 quadrangles (∼9500 km 2 ) in the Healy and Talkeetna Mountains 1° × 3° sheets that span four major lithostratigraphic terranes ( Glen et al., this volume ) including the Wrangellia and Peninsular terranes and two Mesozoic overlap assemblages inboard (northwest) of Wrangellia. These data were used here to develop 2½-dimensional models for the three profiles.

Special Paper of the Geological Society of America↗

USGS2007

Crustal structure of the Alaska Range orogen and Denali fault along the Richardson Highway

A suite of geophysical data obtained along the Richardson Highway crosses the eastern Alaska Range and Denali fault and reveals the crustal structure of the orogen. Strong seismic reflections from within the orogen north of the Denali fault dip as steeply as 25° north and extend downward to depths between 20 and 25 km. These reflections reveal what is probably a shear zone that transects most of the crust and is part of a crustal-scale duplex structure that probably formed during the Late Cretaceous. These structures, however, appear to be relict because over the past 20 years, they have produced little or no seismicity despite the nearby Mw = 7.9 Denali fault earthquake that struck in 2002. The Denali fault is nonreflective, but we interpret modeled magnetotelluric (MT), gravity, and magnetic data to propose that the fault dips steeply to vertically. Modeling of MT data shows that aftershocks of the 2002 Denali fault earthquake occurred above a rock body that has low electrical resistivity (>10 ohm-m), which might signify the presence of fluids in the middle and lower crust.

Special Paper of the Geological Society of America↗

USGS2003

An empirical approach to inversion of an unconventional helicopter electromagnetic dataset

A helicopter electromagnetic (HEM) survey acquired at the U.S. Idaho National Engineering and Environmental Laboratory (INEEL) used a modification of a traditional mining airborne method flown at low levels for detailed characterization of shallow waste sites. The low sensor height, used to increase resolution, invalidates standard assumptions used in processing HEM data. Although the survey design strategy was sound, traditional interpretation techniques, routinely used in industry, proved ineffective. Processed data and apparent resistivity maps were severely distorted, and hence unusable, due to low flight height effects, high magnetic permeability of the basalt host, and the conductive, three-dimensional nature of the waste site targets.To accommodate these interpretation challenges, we modified a one-dimensional inversion routine to include a linear term in the objective function that allows for the magnetic and three-dimensional electromagnetic responses in the in-phase data. Although somewhat ad hoc, the use of this term in the inverse routine, referred to as the shift factor, was successful in defining the waste sites and reducing noise due to the low flight height and magnetic characteristics of the host rock. Many inversion scenarios were applied to the data and careful analysis was necessary to determine the parameters appropriate for interpretation, hence the approach was empirical. Data from three areas were processed with this scheme to highlight different interpretational aspects of the method. Wastes sites were delineated with the shift terms in two of the areas, allowing for separation of the anthropomorphic targets from the natural one-dimensional host. In the third area, the estimated resistivity and the shift factor were used for geological mapping. The high magnetic content of the native soil enabled the mapping of disturbed soil with the shift term. Published by Elsevier Science B.V.

Journal of Applied Geophysics↗

USGS1993

Preliminary results of a helicopter electromagnetic and magnetic survey of the Oak Ridge Reservation, Tennessee for environmental and geologic site characterization

The 35,252 -acre Oak Ridge Reservation (ORR), in the western portion of the Appalachian Valley and Ridge province in Tennessee, has been a nuclear production and development facility for 50 years. Contaminants in the many waste sites on the ORR include heavy radioactive isotopes as well as many organic and inorganic compounds. The locations, geometry, and contents of many of these waste sites are reasonably well known, while others are poorly known, and some may be unknown. To better characterize the known sites and locate and characterize additional environmentally hazardous sites, a two-phase aerial survey of the ORR was begun in April, 1992. Phase I, which began in April, 1992, consisted of aerial radiation, multispectral scanner, and photographic surveys. Phase II, which began in November, 1992 and is described in this presentation, consisted of a helicopter electromagnetic (HEM), magnetic, and radiation survey. Targets of the survey were both man-made (drums, trench boundaries, burn pits, well heads) and geologic (fractures, faults, karst features, geologic contacts). The Phase II survey has three components: testing, reconnaissance, and high-resolution data acquisition. To date, the testing and reconnaissance data acquisition have been completed, and part of the data have been processed. They indicate that: 1) magnetic and HEM data are complementary, and do not always highlight the same anomaly; 2) under favorable circumstances, helicopter magnetometer systems are capable of detecting groups of 4 or more 55-gallon drums at detector altitudes of 15 m or less, 3) HEM data provide data which compare favorably with surface data collected over burial trenches, 4) well casings seem to be related to magnetic monopole anomalies, as would be expected, 5) Changes in EM and magnetic anomaly character are related to lithologic changes and might be used to track contacts between known outcrops.

Tennessee↗