USGS Science⌕ Search

Geology topics

L. D. White

Publications and source records attributed to L. D. White.

At least 19 recordsLinked to original sources
USGS2012

Dissolved gases in the DOSECC Cajon Pass well: First year results

Fluid sampled from granitic rock near the 2 km depth in the DOSECC Cajon Pass well contained He, H 2 , CH 4 , C 2 H 6 , and C 2 H 4 in concentrations much greater than in air-saturated water. The dissolved helium, which ranged in concentration from 0.6 to 0.8 µmole/kg-fluid, was almost entirely radiogenic (³He/ 4 He = 0.06 Ra). The δ 13 C-CH 4 value (−36 per mil) and (C 2 H 6 + C 2 H 4 )/CH 4 ratios (0.02 - 0.05) indicate that the dissolved methane (50-55 µmoles/kg-fluid) was produced by thermogenic breakdown of organic matter. Measured pCO 2 values were very low, about 10 −5 atm., and the carbon isotopes (δ 13 C = −18.9 per mil) point to an organic source such as plant root respiration for the dissolved carbonate species. No evidence of mantle volatiles was found despite proximity of the well to the San Andreas fault.

Geophysical Research Letters↗
USGS2012

Geochemistry of some gases in hydrothermal fluids from the southern Juan de Fuca Ridge

Five samples of hydrothermal fluids from two vent areas on the southern Juan de Fuca Ridge were analyzed for dissolved gases. Concentrations in the end-member hydrothermal fluid of H 2 (270–527 μmol/kg), CH 4 (82–118 μmol/kg), and CO 2 (3920–4460 μmol/kg) are well above values in ambient seawater and are similar to concentrations reported for other ridge crest hydrothermal systems. The carbon isotopic ratios of the CH 4 (δ 13 C = −17.8 to −20.8) and CO 2 (δ 13 C = −3.6 to −4.7) suggest that at least some of the CH 4 and CO 2 in the fluids is basalt-derived. The range of δ 13 C values for the basalt-derived CO 2 is −6.8 to −9.7, calculated by assuming conservation of recharge ΣCO 2 during hydrothermal circulation. Apparent temperatures of equilibration between the CH 4 and the basalt-derived CO 2 range from 640°C to 750°C. Small amounts of ethane (C 2 H 6 /CH 4 ≅ 0.9 × 10 −3 −2.2 × 10 −3 ), propane, and butane detected in the samples may also have formed in the basalt. One sample of almost pure (95.5%) hydrothermal fluid contained a significant fraction, up to 63% and 74%, respectively, of the recharge Ar and N 2 . This suggests that the fluid has not undergone extensive vapor-liquid phase separation.

Journal of Geophysical Research Solid Earth↗
USGS2006

Dolomitization of Quaternary reef limestones, Aitutaki, Cook Islands

Six holes were drilled to depths of 30–69 m in the shallow lagoon of Aitutaki in the southern Cook Islands. One hole encountered pervasively dolomitized reef limestones at 36 m subbottom depth, which extended to the base of the drilled section at 69·3 m. This hole was drilled near the inner edge of the present barrier reef flat on the flank of a seismically defined subsurface ridge. Both the morphology and biofacies indicate that this ridge may represent an outer reef crest. Mineralogy, porosity and cementation change in concert downhole through three zones. Zone 1, 0–9 m, is composed of primary skeletal aragonite and calcite with minor void-filling aragonite and magnesian calcite cement of marine phreatic origin. Zone 2, 9–36 m, is composed of replacement calcite and calcite cement infilling intergranular, intragranular, mouldic and vuggy porosity. Stable isotopes (mean δ 18 O=—5·4‰ PDB for carbonate; δD =—50‰ SMOW for fluid inclusions) support the petrographic evidence indicating that sparry calcite cements formed in predominantly freshwater. Carbon isotope values of —4·0 to —11·0‰ for calcite indicate that organic matter and seawater were the sources of carbon. Zone 3, 36–69·3 m, is composed of replacement dolostone, consisting of protodolomite with, on average, 7 mol% excess CaCO 3 and broad and weak ordering X-ray reflections at 2·41 and 2·54 A. The fine-scale replacement of skeletal grains and freshwater void-filling cements by dolomite did not significantly reduce porosity. Stable isotopes (mean δ 18 O=+2·6‰ 0 PDB for dolomite; maximum δD =—27‰ SMOW for fluid inclusions) and chemical composition indicate that the dolomite probably formed from seawater, although formation in the lower part of a mixed freshwater-seawater zone, with up to 40% freshwater contribution, cannot be completely ruled out. The carbon (δ 13 C=2·7‰) and magnesium were derived from seawater. Low-temperature hydrothermal iron hydroxides and associated transition metals occur in void space in several narrow stratigraphic intervals in the limestone section that was replaced by dolomite. The entire section of dolomite is also enriched in these transition metals. The metals dispersed throughout the dolostone section were introduced at the time of dolomitization by a different and later episode of hydrothermal circulation than the one(s) that produced the localized deposits near the base of the section. The primary reef framework is considered to have been deposited during several highstands of sea level. Following partial to local recrystallization of the limestone, a single episode of dolomitization occurred. Both tidal and thermal pumping drove large quantities of seawater through the porous rocks and perhaps maintained a wide mixing zone. However, the isotopic, geochemical and petrographic data do not clearly indicate the extent of seawater mixing.

Sedimentology↗
USGS2003

Excess nitrogen in selected thermal and mineral springs of the Cascade Range in northern California, Oregon, and Washington: Sedimentary or volcanic in origin?

Anomalous N 2 /Ar values occur in many thermal springs and mineral springs, some volcanic fumaroles, and at least one acid-sulfate spring of the Cascade Range. Our data show that N 2 /Ar values are as high as 300 in gas from some of the hot springs, as high as 1650 in gas from some of the mineral springs, and as high as 2400 in gas from the acid-sulfate spring on Mt. Shasta. In contrast, gas discharging from hot springs that contain nitrogen and argon solely of atmospheric origin typically exhibits N 2 /Ar values of 40–80, depending on the spring temperature. If the excess nitrogen in the thermal and mineral springs is of sedimentary origin then the geothermal potential of the area must be small, but if the nitrogen is of volcanic origin then the geothermal potential must be very large. End-member excess nitrogen (δ 15 N) is +5.3‰ for the thermal waters of the Oregon Cascades but is only about +1‰ for fumaroles on Mt. Hood and the acid-sulfate spring on Mt. Shasta. Dissolved nitrogen concentrations are highest for thermal springs associated with aquifers between 120 and 140°C. Chloride is the major anion in most of the nitrogen-rich springs of the Cascade Range, and N 2 /Ar values generally increase as chloride concentrations increase. Chloride and excess nitrogen in the thermal waters of the Oregon Cascades probably originate in an early Tertiary marine formation that has been buried by the late Tertiary and Quaternary lava flows of the High Cascades. The widespread distribution of excess nitrogen that has been generated in low to moderate-temperature sedimentary environments is further proof of the restricted geothermal potential of the Cascade Range.

Cascade Range↗
USGS2003

Slightly thermal springs and non-thermal springs at Mount Shasta, California: Chemistry and recharge elevations

Temperature measurements, isotopic contents, and dissolved constituents are presented for springs at Mount Shasta to understand slightly thermal springs in the Shasta Valley based on the characteristics of non-thermal springs. Non-thermal springs on Mount Shasta are generally cooler than mean annual air temperatures for their elevation. The specific conductance of non-thermal springs increases linearly with discharge temperature. Springs at higher and intermediate elevations on Mount Shasta have fairly limited circulation paths, whereas low-elevation springs have longer paths because of their higher-elevation recharge. Springs in the Shasta Valley are warmer than air temperatures for their elevation and contain significant amounts of chloride and sulfate, constituents often associated with volcanic hydrothermal systems. Data for the Shasta Valley springs generally define mixing trends for dissolved constituents and temperature. The isotopic composition of the Shasta Valley springs indicates that water fell as precipitation at a higher elevation than any of the non-thermal springs. It is possible that the Shasta Valley springs include a component of the outflow from a proposed 210??C hydrothermal system that boils to supply steam for the summit acid-sulfate spring. In order to categorize springs such as those in the Shasta Valley, we introduce the term slightly thermal springs for springs that do not meet the numerical criterion of 10??C above air temperature for thermal springs but have temperatures greater than non-thermal springs in the area and usually also have dissolved constituents normally found in thermal waters. ?? 2002 Elsevier Science B.V. All rights reserved.

Journal of Volcanology and Geothermal Research↗
USGS2002

Tracing and quantifying magmatic carbon discharge in cold groundwaters: Lessons learned from Mammoth Mountain, USA

A major campaign to quantify the magmatic carbon discharge in cold groundwaters around Mammoth Mountain volcano in eastern California was carried out from 1996 to 1999. The total water flow from all sampled cold springs was ??? 1.8 ?? 107 m3/yr draining an area that receives an estimated 2.5 ?? 107 m3/yr of recharge, suggesting that sample coverage of the groundwater system was essentially complete. Some of the waters contain magmatic helium with 3He/4He ratios as high as 4.5 times the atmospheric ratio, and a magmatic component in the dissolved inorganic carbon (DIC) can be identified in virtually every feature sampled. Many waters have a 14C of 0-5 pmC, a ??13C near -5???, and contain high concentrations (20-50 mmol/1) of CO2(aq); but are otherwise dilute (specific conductance = 100-300 ??S/cm) with low pH values between 5 and 6. Such waters have previously escaped notice at Mammoth Mountain, and possibly at many other volcanoes, because CO2 is rapidly lost to the air as the water flows away from the springs, leaving neutral pH waters containing only 1-3 mmol/1 HCO-3. The total discharge of magmatic carbon in the cold groundwater system at Mammoth Mountain is ~ 20 000 t/yr (as CO2), ranging seasonally from about 30 to 90 t/day. Several types of evidence show that this high discharge of magmatic DIC arose in part because of shallow dike intrusion in 1989, but also demonstrate that a long-term discharge possibly half this magnitude (~ 10 000 t/yr) predated that intrusion. To sustain a 10 000 t/yr DIC discharge would require a magma intrusion rate of 0.057 km3 per century, assuming complete degassing of magma with 0.65 wt% CO2 and a density of 2.7 t/m3. The geochemical data also identify a small ( < 1 t/day) discharge of magmatic DIC that can be traced to the Inyo Domes area north of Mammoth Mountain and outside the associated Long Valley caldera. This research, along with recent studies at Lassen Peak and other western USA volcanoes, suggests that the amount of magmatic carbon in cold groundwaters is important to constraining rates of intrusion and edifice weathering at individual volcanoes and may even represent a significant fraction of the global carbon discharge from volcanoes. ?? 2002 Elsevier Science B.V. All rights reserved.

Journal of Volcanology and Geothermal Research↗
USGS2002

Results of weekly chemical and isotopic monitoring of selected springs in Norris Geyser Basin, Yellowstone National Park during June-September, 1995

Each year at Norris Geyser Basin, generally in August or September, a widespread hydrothermal 'disturbance' occurs that is characterized by simultaneous changes in the discharge characteristics of many springs, particularly in the Back Basin. During the summer season of 1995, water samples from eight widely distributed hot springs and geysers at Norris were collected each week and analyzed to determine whether chemical and isotopic changes also occurred in the thermal waters at the time of the disturbance. In addition, Beryl Spring in Gibbon Canyon, 5.8 km southwest of Norris Geyser Basin, was included in the monitoring program. Waters discharged by four of the monitored hot springs and geysers appear to issue from relatively deep reservoirs where temperatures are at least 270 C and possibly higher than 300 C. At the time of, and for several days after, the onset of the 1995 disturbance, the normally neutral-chloride waters discharged by these four features all picked up an acid-sulfate component and became isotopically heavier. The acid-sulfate component appears to be similar in composition to some waters discharged in 100 Spring Plain that issue from subsurface regions where temperatures are in the range 170-210 C. However, the two monitored springs that discharge acid-chloride-sulfate waters in the 100 Spring Plain region did not show any significant chemical or isotopic response to the annual disturbance. Beryl Spring, and two neutral-chloride hot springs at Norris that appear to draw their water from reservoirs where temperatures are 250 C or less, also did not show any significant chemical or isotopic response to the annual disturbance. After the start of the annual disturbance, chloride concentrations in water sampled from Double Bulger Geyser in the Back Basin increased from about 800 ppm to about 1500 ppm, nearly twice as high as any previously reported chloride concentration in a thermal water at Yellowstone. The isotopic composition of that water precludes an origin of the high chloride by evaporation at atmospheric pressure. One way to account for the unique chemical and isotopic composition of this highly concentrated wateris by recirculation of water that had gone through one cycle of adiabatic cooling during upflow (decompressional boiling) back down into the hydrothermal system, where it is reheated to greater than 220 C. This previously boiled water then undergoes additional cycles of decompressional boiling during subsequent upflow. Another way the unique chemical and isotopic composition of Double Bulger water might evolve is by excess boiling in the formation that results from a decrease in fluid pressure within the channels of upflow. The annual disturbance at Norris Geyser Basin generally appears to be triggered by a cyclic up and down movement of the boilingpoint curve within the hydrothermal system in response to changes in the potentiometric surface of the cold water that is adjacent to, and interconnected with, that hydrothermal system. Annual disturbance phenomena that are easily recognized at Norris Geyser Basin may not be easily recognized elsewhere in Yellowstone National Park because (1) the neutral-chloride waters at Norris ascend directly from higher-temperature and higherpressure reservoirs (270 to >300 C at Norris compared to 180-215C at Upper and Lower Geyser Basins) that are capable of producing massive amounts of high-pressure steam, and (2) the clay that makes hot spring and geyser waters become turbid at Norris, heralding the start of the disturbance, comes from acid altered rocks that are widely distributed at intermediate depths at Norris, and that are rare in other geyser basins.

Wyoming↗
USGS1999

Physical, chemical, and isotopic data for samples from the Anderson Springs area, Lake County, California, 1998-1999

Anderson Springs is located about 90 miles (145 kilometers) north of San Francisco, California, in the southwestern part of Lake County. The area was first developed in the late 1800s as a health resort, which was active until the 1930s. In the rugged hills to the south of the resort were four small mercury mines of the eastern Mayacmas quicksilver district. About 1,260 flasks of mercury were produced from these mines between 1909 and 1943. In the 1970s, the high-elevation areas surrounding Anderson Springs became part of The Geysers geothermal field. Today, several electric powerplants are located on the ridges above Anderson Springs, utilizing steam produced from a 240°C vapor-dominated reservoir. The primary purpose of this report is to provide physical, chemical, and isotopic data on samples collected in the Anderson Springs area during 1998 and 1999, in response to a Freedom of Information Act request. In July 1998, drainage from the Schwartz adit of the abandoned Anderson mercury mine increased substantially over a 2-day period, transporting a slurry of water and precipitates down a tributary and into Anderson Creek. In August 1998, J.J. Rytuba and coworkers sampled the Schwartz adit drainage and water from the Anderson Springs Hot Spring for base metal and methylmercury analysis. They measured a maximum temperature (Tm) of 85°C in the Hot Spring. Published records show that the temperature of the Anderson Springs Hot Spring (main spring) was 63°C in 1889, 42–52°C from 1974 through 1991, and 77°C in March 1995. To investigate possible changes in thermal spring activity and to collect additional samples for geochemical analysis, C.J. Janik and coworkers returned to the area in September and December 1998. They determined that a cluster of springs adjacent to the main spring had Tm=98°C, and they observed that a new area of boiling vents and small fumaroles (Tm=99.3°C) had formed in an adjacent gully about 20 meters to the north of the main spring. During August–October 1999, several field trips were conducted in the vicinity of Anderson Springs to continue monitoring and sampling the thermal manifestations. The new fumarolic area had increased in temperature and in discharge intensity since 1998, and a zone of dead trees had developed on the steep bank directly west of the fumaroles. Ground temperatures and diffuse flow of CO2 flow through soils were measured in the area surrounding the main spring and new fumaroles and in the zone of tree-kill.

California↗
USGS1994

In search of earthquake-related hydrologic and chemical changes along Hayward Fault

Flow and chemical measurements have been made about once a month, and more frequently when required, since 1976 at two springs in Alum Rock Park in eastern San Jose, California, and since 1980 at two shallow wells in eastern Oakland in search of earthquake-related changes. All sites are on or near the Hayward Fault and are about 55 km apart. Temperature, electric conductivity, and water level or flow rate were measured in situ with portable instruments. Water samples were collected for later chemical and isotopic analyses in the laboratory. The measured flow rate at one of the springs showed a long-term decrease of about 40% since 1987, when a multi-year drought began in California. It also showed several increases that lasted a few days to a few months with amplitudes of 2.4 to 8.6 times the standard deviations above the background rate. Five of these increases were recorded shortly after nearby earthquakes of magnitude 5.0 or larger, and may have resulted from unclogging of the flow path and increase of permeability caused by strong seismic shaking. Two other flow increases were possibly induced by exceptionally heavy rainfalls. The water in both wells showed seasonal temperature and chemical variations, largely in response to rainfall. In 1980 the water also showed some clear chemical changes unrelated to rainfall that lasted a few months; these changes were followed by a magnitude 4 earthquake 37 km away. The chemical composition at one of the wells and at the springs also showed some longer-term variations that were not correlated with rainfall but possibly correlated with the five earthquakes mentioned above. These correlations suggest a common tectonic origin for the earthquakes and the anomalies. The last variation at the affected well occurred abruptly in 1989, shortly before a magnitude 5.0 earthquake 54 km away. ?? 1993.

California↗
USGS1994

Six years of change in Lake Nyos, Cameroon, yield clues to the past and cautions for the future

The catastrophic release of gas from Lake Nyos, Cameroon, in 1986 caused substantial but incomplete mixing of the stratified water column. The post-release evolution of water-column structure has been monitored through April 1992. Changes began immediately after the event as rainfall and inflow brought dilute fluid into the surface layer. Inflow and surface mixing have gradually deepened the chemocline. The Total Dissolved Solids (TDS) values in the upper 40 m of the water column have dropped from a few hundred mg/kg just after the release to <100 mg/kg. The chemocline is presently strongest at 50 m depth; 5 m below this, the TDS = 570 mg/kg. From 55 to 150 m depth is a gentle gradient in which TDS reaches 920 mg/kg. Little change in water-column chemistry has occurred in this depth interval since the release. Between 150 m depth and lake bottom at 210 m depth, a strong secondary chemocline has formed. Temperature, CO 2 concentration ([CO 2 ]), and TDS have all increased in the deepest layer in response to recharge by warm, mineralized water, reaching values of 25.0°C, 320 mmol/kg, and 1800 mg/kg, respectively, 1 m above lake bottom. Considering all these changes in part as a “recovery” process, it is possible to construct a model of the pre-release water column. The data indicate that the pre-release chemocline was at least 50 m deep. Above the chemocline was a dilute layer containing a seasonal thermocline; below the chemocline was probably a gradient zone(s) with correlated increases in TDS and [CO 2 ] and a secondary chemocline near lake bottom. Maximum values of TDS and [CO 2 ] calculated for pre-release bottom water are 2400 mg/kg and 430 mmol/kg, respectively, based on tritium data. From this pre-release structure, a model of the gas release is proposed that is consistent with available chemical and observational data. An important feature of the model is that disruption of the pre-existing stratification was much more extensive than previously proposed, and even the deepest water layers were involved in the event. This model is not intended to limit possible gas release mechanisms, and thus complete re-establishment of pre-1986 water-column conditions is not a prerequisite for a future release. Spontaneous instability could occur at lake bottom in <20 yr if dissolved gas pressures continue to increase in this zone by 0.5–1 bar/yr as they have for the last 6 yr.

Lake Nyos↗
USGS1992

The dynamic relationship between ground water and the Columbia River: Using deuterium and oxygen-18 as tracers

Deuterium and oxygen-18 were used as natural tracers to investigate the hydraulic relationship between the Columbia River and the Blue Lake gravel aquifer near Portland, Oregon. A time series of stable-isotope data collected from surface and ground waters during a March 1990 aquifer test confirms that the river and aquifer are hydraulically connected. Calculations based on simple mixing show that the river contributed 40–50% of the yield of three wells after 5–6 days of pumping. Data collected during August 1990, show that the river contributed 65–80% of the yield of one well after 22 days of pumping and indicate that the contribution of the river was still increasing.

Journal of Hydrology↗
USGS1992

Thermal waters along the Konocti Bay fault zone, Lake County, California: a re-evaluation

The Konocti Bay fault zone (KBFZ), initially regarded by some as a promising target for liquid-dominated geothermal systems, has been a disappointment. At least five exploratory wells were drilled in the vicinity of the KBFZ, but none were successful. Although the Na-K-Ca and Na-Li geothermometers indicate that the thermal waters discharging in the vicinity of Howard and Seigler Springs may have equilibrated at temperatures greater than 200??C, the spring temperatures and fluid discharges are low. Most thermal waters along the KBFZ contain >100 mg/l Mg. High concentrations of dissolved magnesium are usually indicative of relatively cool hydrothermal systems. Dissolution of serpentine at shallow depths may contribute dissolved silica and magnesium to rising thermal waters. Most thermal waters are saturated with respect to amorphous silica at the measured spring temperature. Silica geothermometers and mixing models are useless because the dissolved silica concentration is not controlled by the solubility of either quartz or chalcedony. Cation geothermometry indicates the possibility of a high-temperature fluid (> 200??C) only in the vicinity of Howard and Seigler Springs. However, even if the fluid temperature is as high as that indicated by the geothermometers, the permeability may be low. Deuterium and oxygen-18 values of the thermal waters indicate that they recharged locally and became enriched in oxygen-18 by exchange with rock. Diluting meteoric water and the thermal water appear to have the same deuterium value. Lack of tritium in the diluted spring waters suggest that the diluting water is old. ?? 1992.

Journal of Volcanology and Geothermal Research↗
USGS1992

Geochemistry of waters in the Valley of Ten Thousand Smokes region, Alaska

Meteoric waters from cold springs and streams outside of the 1912 eruptive deposits filling the Valley of Ten Thousand Smokes (VTTS) and in the upper parts of the two major rivers draining the 1912 deposits have similar chemical trends. Thermal springs issue in the mid-valley area along a 300-m lateral section of ash-flow tuff, and range in temperature from 21 to 29.8??C in early summer and from 15 to 17??C in mid-summer. Concentrations of major and minor chemical constituents in the thermal waters are nearly identical regardless of temperature. Waters in the downvalley parts of the rivers draining the 1912 deposits are mainly mixtures of cold meteoric waters and thermal waters of which the mid-valley thermal spring waters are representative. The weathering reactions of cold waters with the 1912 deposits appear to have stabilized and add only subordinate amounts of chemical constituents to the rivers relative to those contributed by the thermal waters. Isotopic data indicate that the mid-valley thermal spring waters are meteoric, but data is inconclusive regarding the heat source. The thermal waters could be either from a shallow part of a hydrothermal system beneath the 1912 vent region or from an incompletely cooled, welded tuff lens deep in the 1912 ash-flow sheet of the upper River Lethe area. Bicarbonate-sulfate waters resulting from interaction of near-surface waters and the cooling 1953-1968 southwest Trident plug issue from thermal springs south of Katmai Pass and near Mageik Creek, although the Mageik Creek spring waters are from a well-established, more deeply circulating hydrothermal system. Katmai caldera lake waters are a result of acid gases from vigorous drowned fumaroles dissolving in lake waters composed of snowmelt and precipitation. ?? 1992.

Journal of Volcanology and Geothermal Research↗
USGS1991

Subalkaline andesite from Valu Fa Ridge, a back-arc spreading center in southern Lau Basin: petrogenesis, comparative chemistry, and tectonic implications

Tholeiitic andesite was dredged from two sites on Valu Fa Ridge (VFR), a back-arc spreading center in Lau Basin. Valu Fa Ridge, at least 200 km long, is located 40-50 km west of the active Tofua Volcanic Arc (TVA) axis and lies about 150 km above the subducted oceanic plate. One or more magma chambers, traced discontinuously for about 100 km along the ridge axis, lie 3-4 km beneath the ridge. The mostly aphyric and glassy lavas had high volatile contents, as shown by the abundance and large sizes of vesicles. An extensive fractionation history is inferred from the high SiO2 contents and FeO* MgO ratios. Chemical data show that the VFR lavas have both volcanic arc and back-arc basin affinities. The volcanic arc characteristics are: (1) relatively high abundances of most alkali and alkaline earth elements; (2) low abundances of high field strength elements Nb and Ta; (3) high U/Th ratios; (4) similar radiogenic isotope ratios in VFR and TVA lavas, in particular the enrichment of 87Sr 86Sr relative to 206Pb 204Pb; (5) high 238U 230Th, 230Th 232Th, and 226Ra 230Th activity ratios; and (6) high ratios of Rb/Cs, Ba/Nb, and Ba/La. Other chemical characteristics suggest that the VFR lavas are related to MORB-type back-arc basin lavas. For example, VFR lavas have (1) lower 87Sr 86Sr ratios and higher 143Nd 144Nd ratios than most lavas from the TVA, except samples from Ata Island, and are similar to many Lau Basin lavas; (2) lower Sr/REE, Rb/Zr, and Ba/Zr ratios than in arc lavas; and (3) higher Ti, Fe, and V, and higher Ti/V ratios than arc lavas generally and TVA lavas specifically. Most characteristics of VFR lavas can be explained by mixing depleted mantle with either small amounts of sediment and fluids from the subducting slab and/or an older fragment of volcanic arc lithosphere. The eruption of subalkaline andesite with some arc affinities along a back-arc spreading ridge is not unique. Collision of the Louisville and Tonga ridges probably activated back-arc extension that ultimately led to the creation and growth of Valu Fa Ridge. Some ophiolitic fragments in circum-Pacific and circum-Tethyan allochthonous terranes, presently interpreted to have originated in volcanic arcs, may instead be fragments of lithosphere that formed during early stages of seafloor spreading in a back-arc basin. ?? 1991.

Chemical Geology↗
USGS1989

Oxygen-isotope composition of ground water and secondary minerals in Columbia Plateau basalts: Implications for the paleohydrology of the Pasco Basin

Concentrations of 18 O and deuterium in ground waters beneath the Hanford Reservation, Washington State, suggest that the meteoric waters recharging the basalt aquifers have been progressively depleted in these isotopes since at least Pleistocene time. This conclusion is supported by oxygen-isotope analyses of low-temperature secondary minerals filling vugs and fractures in the basalts, which are used to approximate the 18 O content of ground water at the time the mineral assemblage formed. A fossil profile of δ 18 O values projected for ground water in a 1500 m vertical section beneath the reservation suggests that the vertical mixing of shallow and deep ground water indicated by present-day hydrochemical data was also occurring during Neogene time. These data also suggest that a unidirectional depletion of 18 O and deuterium recorded in Pleistocene ground waters may have extended considerably further back in time. This shift is tentatively attributed to the orographic depletion of 18 O associated with the progressive uplift of the Cascade Range since the middle Miocene.

Geology↗
USGS1988

The role of mantle CO2 in volcanism

Carbon dioxide is the propellant gas in volcanic eruptions and is also found in mantle xenoliths. It is speculated that CO2 occurs as a free gas phase in the mantle because there is no reason to expect CO2 to be so universally associated with volcanic rocks unless the CO2 comes from the same source as the volcanic rocks and their xenoliths. If correct, the presence of a free gas in the mantle would lead to physical instability, with excess gas pressure providing the cause of both buoyancy of volcanic melts and seismicity in volcanic regions. Convection in the mantle and episodic volcanic eruptions are likely necessary consequences. This suggestion has considerable implications for those responsible for providing warnings of impending disasters resulting from volcanic eruptions and earthquakes in volcanic regions.

Applied Geochemistry↗