USGS Science⌕ Search

Geology topics

Kevin D. Hop

Publications and source records attributed to Kevin D. Hop.

11 recordsLinked to original sources
USGS2022

Vegetation map for the Seboeis Unit of Katahdin Woods and Waters National Monument

The Katahdin Woods and Waters National Monument, located in the forests of central Maine, is a newly (2016) established unit for the National Park Service. To better understand the condition of lands within the monument and inform management planning, Katahdin Woods and Waters National Monument resource managers wanted better information of the vegetation present within the monument. To meet this need, scientists at the U.S. Geological Survey Upper Midwest Environmental Sciences Center worked with ecologists at the Maine Natural Areas Program to catalog and map the vegetation of the Seboeis Unit of the monument. This report details this process, provides results of the survey and mapping efforts, presents results in the form of a vegetation map for the Seboeis Unit, and provides vegetation descriptions and a dichotomous key for the entire Katahdin Woods and Waters National Monument.

Maine↗
USGS2021

National Park Service Vegetation Mapping Inventory Program: Great Smoky Mountains National Park vegetation mapping project

The National Park Service (NPS) Vegetation Mapping Inventory (VMI) Program is an effort to classify, describe, and map existing vegetation communities in national park units throughout the United States. The NPS VMI Program is managed by the NPS Natural Resource Stewardship and Science Inventory and Monitoring Program and provides baseline vegetation information to natural resource managers, researchers, and ecologists. The U.S. Geological Survey Upper Midwest Environmental Sciences Center, NatureServe, and NPS Great Smoky Mountains National Park (GRSM, also referred to as the “Park”) have completed vegetation classification and mapping of GRSM, including the Foothills Parkway, for the NPS VMI Program. Mappers, ecologists, and botanists collaborated to affirm vegetation types of GRSM and to determine how best to map the vegetation types by using aerial imagery. A vegetation classification developed in 2003 by NatureServe and the NPS served as a foundation to further classify and map the vegetation types of the Park. Data from an additional 10 vegetation plots supported vegetation types either rare or not documented in the 2003 classification. Data from 203 verification sites were collected to test the field key to vegetation types and the application of vegetation types to a sample set of map polygons. Furthermore, data from 972 accuracy assessment (AA) sites were collected (of which 966 were used to test accuracy of the vegetation map layer). This GRSM vegetation mapping project identified 112 vegetation types consisting of 105 association types in the U.S. National Vegetation Classification (USNVC), 2 “park-special” types, 1 “map-special” type, and 4 cultural types in the USNVC. To map the vegetation and land cover of GRSM, 52 map classes were developed. Of these 52 map classes, 46 represent natural (including ruderal) vegetation types, most of which types are recognized in the USNVC. For the remaining 6 of the 52 map classes, 4 represent USNVC cultural types for agricultural and developed areas, and 2 represent non-USNVC types for nonvegetated open water and nonvegetated rock. Features were interpreted from viewing four-band digital aerial imagery using digital onscreen three-dimensional stereoscopic workflow systems in geographic information systems; digital aerial imagery was collected during September 23–October 30, 2015. The interpreted data were digitally and spatially referenced, thus making the spatial-database layers usable in a geographic information system. Polygon units were mapped to either a 0.5- or 0.25- hectare (ha) minimum mapping unit, depending on vegetation type. A geodatabase containing several feature-class layers and tables provides the locations and data of USNVC vegetation types (vegetation map layer), vegetation plots, verification sites, AA sites, project boundary extent, and aerial image centers and flight lines. Covering 210,875 ha, the feature-class layer and related tables for the vegetation map layer provide 34,084 polygons of detailed attribute data when special modifiers are not considered (average polygon size of 6.2 ha) and 36,589 polygons of detailed attribute data when special modifiers are considered (average polygon size of 5.8 ha). Each map polygon is assigned a map-class code and name and, when applicable, are linked to USNVC classification tables within the geodatabase. The vegetation map extent includes the administrative boundary for GRSM and the Foothills Parkway. A summary report, generated from the vegetation map layer, concludes that the 46 map classes representing natural (including ruderal) vegetation types apply to 99.2% of polygons (33,797 polygons; average size of 6.2 ha) and cover 98.6% of the Park (207,971.4 ha). Further broken down, map classes representing natural vegetation types indicate that the Park is 97.7% forest and woodland (205,882.5 ha), 0.6% shrubland (1,174.6 ha), and 0.4% herbaceous (914.3 ha). Map classes representing cultural vegetation types apply to 0.8% of polygons (259 polygons; average size of 4.9 ha) and cover 0.6% of the Park (1,277.4 ha). Map classes representing nonvegetation open and flowing water and unvegetated rock apply to 0.08% of polygons (28 polygons; average size of 58.1 ha) and cover 0.8% of the Park (1,625.9 ha). A thematic AA study was completed of map classes representing the natural (including ruderal) vegetation types of the Park. Initial AA results were discussed with NPS staff from the Park. Following input from NPS staff on how to handle map classes that fell below accuracy standards, adjustments were made to the vegetation map layer. Final results indicate an overall accuracy of 80.64% (kappa index of 79.96% for chance agreements) based on data from 966 of the 972 AA sites. Most individual map-class themes exceed the NPS VMI Program standard of 80% with a 90% confidence interval. The GRSM vegetation mapping project delivers many geospatial and vegetation data products, including an in-depth project report discussing methods and results, which includes map classification and map-class descriptions. This suite of products also includes descriptions and a field key to vegetation types; a database of vegetation plots, verification sites, and AA sites; digital images of field sites; field data sheets; digital aerial imagery; hardcopy and digital maps; a geodatabase of vegetation and land cover (map layer), field sites (vegetation plots, verification sites, and AA sites), aerial imagery index, project boundary, and metadata; and a contingency table listing AA results. Geospatial products are projected in the Universal Transverse Mercator, Zone 17 North, by using the North American Datum of 1983. Information on the NPS VMI Program and completed mapping projects are on the internet at https://www.nps.gov/im/vegetation-inventory.htm.

North Carolina, Tennessee↗
USGS2020

USGS Illinois River monitoring and evaluation

Asian carp monitoring and contract removal will continue throughout the Upper Illinois Waterway system as needed for adaptive management to mitigate, control, and contain Asian carp. Compiling data from monitoring and removal efforts into a centralized database (Illinois River Catch Database application) facilitates data standardization, quality, accessibility, sharing, and analysis to aid in Asian carp removal efforts, evaluations of management actions, and modeling efforts (e.g., SEACarP model). Data summarization, visualization, and modeling supports a better understanding of bigheaded carp life history, behavior, and habitat use. Integrating Asian carp-related data and analyses into decision support tools and products aids in applying control and containment methods in an informed and transparent manner (e.g., improved efficiencies in implementations of the Unified Method, inform targeted removal efforts or deterrent deployments in key locations based on preferential benthic characteristics and environmental conditions).

Illinois↗
USGS2017

National Park Service Vegetation Mapping Inventory Program: Appalachian National Scenic Trail vegetation mapping project

The National Park Service (NPS) Vegetation Mapping Inventory (VMI) Program classifies, describes, and maps existing vegetation of national park units for the NPS Natural Resource Inventory and Monitoring (I&M) Program. The NPS VMI Program is managed by the NPS I&M Division and provides baseline vegetation information to the NPS Natural Resource I&M Program. The U.S. Geological Survey Upper Midwest Environmental Sciences Center, NatureServe, NPS Northeast Temperate Network, and NPS Appalachian National Scenic Trail (APPA) have completed vegetation classification and mapping of APPA for the NPS VMI Program. Mappers, ecologists, and botanists collaborated to affirm vegetation types within the U.S. National Vegetation Classification (USNVC) of APPA and to determine how best to map the vegetation types by using aerial imagery. Analyses of data from 1,618 vegetation plots were used to describe USNVC associations of APPA. Data from 289 verification sites were collected to test the field key to vegetation associations and the application of vegetation associations to a sample set of map polygons. Data from 269 validation sites were collected to assess vegetation mapping prior to submitting the vegetation map for accuracy assessment (AA). Data from 3,265 AA sites were collected, of which 3,204 were used to test accuracy of the vegetation map layer. The collective of these datasets affirmed 280 USNVC associations for the APPA vegetation mapping project. To map the vegetation and land cover of APPA, 169 map classes were developed. The 169 map classes consist of 150 that represent natural (including ruderal) vegetation types in the USNVC, 11 that represent cultural (agricultural and developed) vegetation types in the USNVC, 5 that represent natural landscapes with catastrophic disturbance or some other modification to natural vegetation preventing accurate classification in the USNVC, and 3 that represent nonvegetated water (non-USNVC). Features were interpreted from viewing 4-band digital aerial imagery using digital onscreen three-dimensional stereoscopic workflow systems in geographic information systems (GIS). (Digital aerial imagery was collected each fall during 2009–11 to capture leaf-phenology change of hardwood trees across the latitudinal range of APPA.) The interpreted data were digitally and spatially referenced, thus making the spatial-database layers usable in GIS. Polygon units were mapped to either a 0.5-hectare (ha) or 0.25-ha minimum mapping unit, depending on vegetation type or scenario; however, polygon units were mapped to 0.1 ha for alpine vegetation. A geodatabase containing various feature-class layers and tables provide locations and support data to USNVC vegetation types (vegetation map layer), vegetation plots, verification sites, validation sites, AA sites, project boundary extent and zones, and aerial image centers and flight lines. The feature-class layer and related tables of the vegetation map layer provide 30,395 polygons of detailed attribute data covering 110,919.7 ha, with an average polygon size of 3.6 ha; the vegetation map coincides closely with the administrative boundary for APPA. Summary reports generated from the vegetation map layer of the map classes representing USNVC natural (including ruderal) vegetation types apply to 28,242 polygons (92.9% of polygons) and cover 106,413.0 ha (95.9%) of the map extent for APPA. The map layer indicates APPA to be 92.4% forest and woodland (102,480.8 ha), 1.7% shrubland (1866.3 ha), and 1.8% herbaceous cover (2,065.9 ha). Map classes representing park-special vegetation (undefined in the USNVC) apply to 58 polygons (0.2% of polygons) and cover 404.3 ha (0.4%) of the map extent. Map classes representing USNVC cultural types apply to 1,777 polygons (5.8% of polygons) and cover 2,516.3 ha (2.3%) of the map extent. Map classes representing nonvegetated water (non-USNVC) apply to 332 polygons (1.1% of polygons) and cover 1,586.2 ha (1.4%) of the map extent.

Appalachian National Scenic Trail↗
USGS2017

National Park Service Vegetation Mapping Inventory Program: Jean Lafitte National Historical Park and Preserve Vegetation Mapping Project

The National Park Service, Natural Resource Stewardship and Science office in Fort Collins, Colorado, publishes a range of reports that address natural resource topics. These reports are of interest and applicability to a broad audience in the National Park Service and others in natural resource management, including scientists, conservation and environmental constituencies, and the public. The Natural Resource Report Series is used to disseminate comprehensive information and analysis about natural resources and related topics concerning lands managed by the National Park Service. The series supports the advancement of science, informed decision-making, and the achievement of the National Park Service mission. The series also provides a forum for presenting lengthier results that may not be accepted by publications with page limitations. All manuscripts in the series receive the appropriate level of peer review to ensure that the information is scientifically credible, technically accurate, appropriately written for the intended audience, and designed and published in a professional manner. This report received formal peer review by subject-matter experts whose background and expertise put them on par technically and scientifically with the authors of the information. The peer review was led according to the Fundamental Science Practices of the U.S. Geological Survey. Views, statements, findings, conclusions, recommendations, and data in this report do not necessarily reflect views and policies of the National Park Service, U.S. Department of the Interior. Mention of trade names or commercial products does not constitute endorsement or recommendation for use by the U.S. Government. This report is available in digital format from the Gulf Coast Network website and the Natural Resource Publications Management website.

Louisiana↗
USGS2016

National Park Service Vegetation Mapping Inventory Program: Natchez Trace Parkway vegetation mapping project report

The National Park Service (NPS) Vegetation Mapping Inventory (VMI) Program is an effort to classify, describe, and map existing vegetation of national park units for the NPS Natural Resource Inventory and Monitoring (I&M) Program. The NPS VMI Program is managed by the NPS I&M Division and provides baseline vegetation information to the NPS Natural Resource I&M Program. The U.S. Geological Survey Upper Midwest Environmental Sciences Center, NatureServe, NPS Gulf Coast Network, and NPS Natchez Trace Parkway (NATR; also referred to as Parkway) have completed vegetation classification and mapping of NATR for the NPS VMI Program. Mappers, ecologists, and botanists collaborated to affirm vegetation types within the U.S. National Vegetation Classification (USNVC) of NATR and to determine how best to map them by using aerial imagery. Analyses of data from 589 vegetation plots had been used to describe an initial 99 USNVC associations in the Parkway; this classification work was completed prior to beginning this NATR vegetation mapping project. Data were collected during this project from another eight quick plots to support new vegetation types not previously identified at the Parkway. Data from 120 verification sites were collected to test the field key to vegetation associations and the application of vegetation associations to a sample set of map polygons. Furthermore, data from 900 accuracy assessment (AA) sites were collected (of which 894 were used to test accuracy of the vegetation map layer). The collective of all these datasets resulted in affirming 122 USNVC associations at NATR. To map the vegetation and open water of NATR, 63 map classes were developed. including the following: 54 map classes represent natural (including ruderal) vegetation types in the USNVC, 5 map classes represent cultural (agricultural and developed) vegetation types in the USNVC, 3 map classes represent nonvegetation open-water bodies (non-USNVC), and 1 map class represents landscapes that had received tornado damage a few months prior to the time of aerial imagery collection. Features were interpreted from viewing 4-band digital aerial imagery by means of digital onscreen three-dimensional stereoscopic workflow systems in geographic information systems. (The aerial imagery was collected during mid-October 2011 for the northern reach of the Parkway and mid-November 2011 for the southern reach of the Parkway to capture peak leaf-phenology of trees.) The interpreted data were digitally and spatially referenced, thus making the spatial-database layers usable in geographic information systems. Polygon units were mapped to either a 0.5 hectare (ha) or 0.25 ha minimum mapping unit, depending on vegetation type or scenario. A geodatabase containing various feature-class layers and tables present the locations of USNVC vegetation types (vegetation map), vegetation plot samples, verification sites, AA sites, project boundary extent, and aerial image centers. The feature-class layer and related tables for the vegetation map provide 13,529 polygons of detailed attribute data covering 21,655.5 ha, with an average polygon size of 1.6 ha; the vegetation map coincides closely with the administrative boundary for NATR. Summary reports generated from the vegetation map layer of the map classes representing USNVC natural (including ruderal) vegetation types apply to 12,648 polygons (93.5% of polygons) and cover 18,542.7 ha (85.6%) of the map extent for NATR. The map layer indicates the Parkway to be 70.5% forest and woodland (15,258.7 ha), 0.3% shrubland (63.0 ha), and 14.9% herbaceous cover (3,221.0 ha). Map classes representing USNVC cultural types apply to 678 polygons (5.0% of polygons) and cover 2,413.9 ha (11.1%) of the map extent.

Natural Resource Report↗
USGS2015

National Park Service vegetation inventory program: Mississippi National River and Recreation Area, Minnesota

The Mississippi National River and Recreation Area (MISS) vegetation mapping project is an initiative of the National Park Service (NPS) Vegetation Inventory Program (VIP) to classify and map vegetation types of MISS. (Note: “MISS” is also referred to as “park” throughout this report.) The goals of the project are to adequately describe and map vegetation types of the park and to provide the NPS Natural Resource Inventory and Monitoring (I&M) Program, resource managers, and biological researchers with useful baseline vegetation information. The MISS vegetation mapping project was officially started in spring 2012, with a scoping meeting wherein partners discussed project objectives, goals, and methods. Major collaborators at this meeting included staff from the NPS MISS, the NPS Great Lakes Network (GLKN), NatureServe, and the USGS Upper Midwest Environmental Sciences Center. The Minnesota Department of Natural Resources (DNR) was also in attendance. Common to all NPS VIP projects, the three main components of the MISS vegetation mapping project are as follows: (1) vegetation classification, (2) vegetation mapping, and (3) map accuracy assessment (AA). In this report, each of these fundamental components is discussed in detail. With the completion of the MISS vegetation mapping project, all nine park units within the NPS GLKN have received vegetation classification and mapping products from the NPS and USGS vegetation programs. Voyageurs National Park and Isle Royale National Park were completed during 1996–2001 (as program pilot projects) and another six park units were completed during 2004–11, including the Apostle Islands National Lakeshore, Grand Portage National Monument, Indiana Dunes National Lakeshore, Pictured Rocks National Lakeshore, Saint Croix National Scenic Riverway, and Sleeping Bear Dunes National Lakeshore.

Natural Resource Report↗
USGS2013

National Park Service Vegetation Inventory Program, Cuyahoga Valley National Park, Ohio

The National Park Service (NPS) Vegetation Inventory Program (VIP) is an effort to classify, describe, and map existing vegetation of national park units for the NPS Natural Resource Inventory and Monitoring (I&M) Program. The NPS VIP is managed by the NPS Biological Resources Management Division and provides baseline vegetation information to the NPS Natural Resource I&M Program. The U.S. Geological Survey (USGS) Vegetation Characterization Program lends a cooperative role in the NPS VIP. The USGS Upper Midwest Environmental Sciences Center, NatureServe, and NPS Cuyahoga Valley National Park (CUVA) have completed vegetation classification and mapping of CUVA. Mappers, ecologists, and botanists collaborated to identify and describe vegetation types within the National Vegetation Classification Standard (NVCS) and to determine how best to map them by using aerial imagery. The team collected data from 221 vegetation plots within CUVA to develop detailed descriptions of vegetation types. Data from 50 verification sites were also collected to test both the key to vegetation types and the application of vegetation types to a sample set of map polygons. Furthermore, data from 647 accuracy assessment (AA) sites were collected (of which 643 were used to test accuracy of the vegetation map layer). These data sets led to the identification of 45 vegetation types at the association level in the NVCS at CUVA. A total of 44 map classes were developed to map the vegetation and general land cover of CUVA, including the following: 29 map classes represent natural/semi-natural vegetation types in the NVCS, 12 map classes represent cultural vegetation (agricultural and developed) in the NVCS, and 3 map classes represent non-vegetation features (open-water bodies). Features were interpreted from viewing color-infrared digital aerial imagery dated October 2010 (during peak leaf-phenology change of trees) via digital onscreen three-dimensional stereoscopic workflow systems in geographic information systems (GIS). The interpreted data were digitally and spatially referenced, thus making the spatial database layers usable in GIS. Polygon units were mapped to either a 0.5 ha or 0.25 ha minimum mapping unit, depending on vegetation type. A geodatabase containing various feature-class layers and tables shows the locations of vegetation types and general land cover (vegetation map), vegetation plot samples, verification sites, AA sites, project boundary extent, and aerial photographic centers. The feature-class layer and relate tables for the CUVA vegetation map provides 4,640 polygons of detailed attribute data covering 13,288.4 ha, with an average polygon size of 2.9 ha. Summary reports generated from the vegetation map layer show map classes representing natural/semi-natural types in the NVCS apply to 4,151 polygons (89.4% of polygons) and cover 11,225.0 ha (84.5%) of the map extent. Of these polygons, the map layer shows CUVA to be 74.4% forest (9,888.8 ha), 2.5% shrubland (329.7 ha), and 7.6% herbaceous vegetation cover (1,006.5 ha). Map classes representing cultural types in the NVCS apply to 435 polygons (9.4% of polygons) and cover 1,825.7 ha (13.7%) of the map extent. Map classes representing non-NVCS units (open water) apply to 54 polygons (1.2% of polygons) and cover 237.7 ha (1.8%) of the map extent. A thematic AA study was conducted of map classes representing natural/semi-natural types in the NVCS. Results present an overall accuracy of 80.7% (kappa index of 79.5%) based on data from 643 of the 647 AA sites. Most individual map-class themes exceed the NPS VIP standard of 80% with a 90% confidence interval. The CUVA vegetation mapping project delivers many geospatial and vegetation data products in hardcopy and/or digital formats. These products consist of an in-depth project report discussing methods and results, which include descriptions and a dichotomous key to vegetation types, map classification and map-class descriptions, and a contingency table showing AA results. The suite of products also includes a database of vegetation plots, verification sites, and AA sites; digital pictures of field sites; field data sheets; aerial photographic imagery; hardcopy and digital maps; and a geodatabase of vegetation types and land cover (map layer), fieldwork locations (vegetation plots, verification sites, and AA sites), aerial photographic index, project boundary, and metadata. All geospatial products are projected in Universal Transverse Mercator, Zone 17, by using the North American Datum of 1983. Information on the NPS VIP and completed park mapping projects are located on the Internet at <http://science.nature.nps.gov/im/inventory/veg> and <http://www.usgs.gov/core_science_systems/csas/vip/index.html>.

Natural Resource Technical Report↗