USGS Science⌕ Search

Geology topics

Katherine C. Malpeli

Publications and source records attributed to Katherine C. Malpeli.

18 recordsLinked to original sources
USGS2022

Ungulate migration in a changing climate—An initial assessment of climate impacts, management priorities, and science needs

Executive Summary Migratory behavior among ungulates in the Western United States occurs in response to changing forage quality and quantity, weather patterns, and predation risk. As snow melts and vegetation green-up begins in late spring and early summer, many migratory ungulates leave their winter range and move to higher elevation summer ranges to access high-quality forage and areas with vegetative cover for protection during fawning. Ungulates remain on these ranges until the fall when increasing snowfall and decreasing temperatures trigger them to migrate back to their lower elevation winter ranges. While researchers have begun to assess the effects of physical barriers such as roads and energy infrastructure on migration, less attention has been paid to understanding how changing climate conditions might affect ungulate movements and range habitats. Does earlier spring green-up make ungulates leave their winter ranges sooner? Do persistent drought conditions reduce the carrying capacity of seasonal range habitats or lead to shifts in migration pathways? These and other questions remain largely unanswered but could have cascading effects on ungulate population dynamics and migratory behavior. In February 2018, the Secretary of the Interior signed Department of the Interior Secretarial Order 3362 (SO3362), “Improving Habitat Quality in Western Big-Game Winter Range and Migration Corridors.” The order, which focuses on elk, mule deer, and pronghorn in 11 Western States, directs the Bureau of Land Management (BLM), the U.S. Fish and Wildlife Service (FWS), the National Park Service (NPS), and the U.S. Geological Survey (USGS) to partner with State wildlife agencies on their priorities and objectives for identifying and conserving ungulate migration corridors and winter-range habitat. The USGS Climate Adaptation Science Centers (CASCs) were established to help managers of the Nation’s fish, wildlife, waters, and lands understand the effects of climate change and adapt to changing conditions. To support the recent Department of the Interior (DOI) emphasis on ungulate migration corridors and winter-range habitat, this report assesses current information on how climate change could affect elk, mule deer, and pronghorn migration. The report synthesizes the drivers of migration, outlines what is known about how climate change might affect these drivers, and summarizes management priorities and science needs related to ungulate migration corridors and range habitat. A review of the literature on ungulate migration shows that the core drivers of spring migration are the timing of spring green-up and snowmelt, and the core driver of fall migration is winter severity. After exploring what is known about how these drivers affect or could be affected by climate change, several pathways through which ungulate migration could be altered were identified: (1) ungulates alter migration timing to better track plant phenology or in response to changes in winter conditions; (2) ungulates change their migration route or distance traveled during migration to accommodate changes in environmental conditions; and (3) ungulate populations that are currently migratory may begin to demonstrate interannual variability in whether they migrate, depending on environmental conditions and density-dependence, and may remain resident for sets of consecutive years. Through discussions with managers, physical barriers to movement such as roads and fences were identified as a core concern. In addition, the primary research needs of States are the acquisition and analysis of data on ungulate movements, to refine delineation of winter range, summer range, and corridors, and to support a better understanding of how ungulates use these habitats. When it comes to understanding climate effects, managers were more concerned with understanding the vulnerability of winter- and summer-range habitats than the vulnerability of migration corridors because of the influence of summer and winter forage on ungulate condition and reproductive success. Managers were also concerned about how forage quality and quantity might change because of stressors such as drought, wildfire, and invasive species and how they might need to alter habitat-treatment strategies as a result. More baseline data are needed before effective projections of ungulate migration, at a West-wide scale under climate change, can be made. These data needs include (1) more clearly defined corridors and seasonal range habitats; (2) a comprehensive understanding of the ecological drivers of migration across ungulate species and populations; and (3) the identification of environmental thresholds for key variables that influence migration, above which ungulates alter migratory behavior. The CASCs have several opportunities to play a role in addressing these needs. The CASCs could initiate projects to identify past and potential future changes and trends in key variables known to affect ungulate migration, such as plant phenology, forage quality, or winter severity. However, it would be difficult to use this information to determine what those trends mean for ungulate migration due to the lack of knowledge about environmental thresholds for ungulates. Additional projects would be required to compare multiple years of movement data with key variables to define thresholds. Once available, information on environmental thresholds could be integrated with projections of key variables to forecast the likelihood that the migration routes or the distance traveled could change—another area in which the CASCs could contribute. A more immediate role for the CASCs would be to carry out synthesis projects. One such project could summarize the “state of the science” on the drivers of ungulate migration. Although there are dozens of population- and location-specific studies on this topic, collating this information could help highlight trends in migration drivers that span species and geographies: a necessary first step toward determining the extent to which migration drivers could be affected by climate change. A second project could focus on what is known about how climate variability and change affect ungulate life-histories, population dynamics, and migration in the Western United States. The goal of this effort could be to identify knowledge clusters and information gaps that require further investigation. Together, these synthesized products could focus future scientific activities on the most pressing issues of ungulate migration and climate change in the Western United States.

Arizona, California, Colorado, Idaho, Montana, New↗
USGS2015

Topographic and Hydrographic GIS Datasets for the Afghanistan Geological Survey and U.S. Geological Survey 2014 Mineral Areas of Interest

Mineral extraction and associated industries play an important role in the Afghan economy, particularly in the “transitional era” of declining foreign aid and withdrawal of foreign troops post 2014. In addition to providing a substantial source of government revenue, other potential benefits of natural resource development include boosted exports, employment opportunities, and strengthened industrialization (Joya, 2012). Continued exploration and investment in these industries has resulted in large economic improvements since 2007, when this series of studies was initiated. At that time, the “Preliminary Non-Fuel Mineral Resource Assessment of Afghanistan” was completed by members of the U.S. Geological Survey and Afghanistan Geological Survey (Peters and others, 2007). The assessment published a series of country-wide datasets, including a digital elevation model (DEM), elevation contours, hydrography, transportation routes, geophysics, and cultural datasets (Peters and others, 2007). It also delineated 20 mineralized areas for further study using a geologic-based methodology. A second data product, “Summaries of Important Areas for Mineral Investment and Production Opportunities of Nonfuel Minerals in Afghanistan,” was released by Peters and others in 2011. This work highlighted geologic, geohydrologic, and hyperspectral studies that were carried out in specific Areas of Interest (AOIs) to assess the location and characteristics of mineral resources. Also included in the 2011 publication is a collection of appendixes and inventories of Geographic Information System (GIS) datasets for each of the 24 identified AOIs. A third data product was released in 2013 (Casey and Chirico, 2013), publishing datasets for five different AOIs, two subareas, and one AOI extension. Each dataset contains vector shapefiles of the AOI boundary, streams, roads, and contours at 25-, 50-, and 100-meter (m) intervals, as well as raster files of the AOI’s DEM and hillshade. This work represents the fourth installment of the series, and publishes a dataset of eight new AOIs and one subarea within Afghanistan. These areas include Dasht-e-Nawar, Farah, North Ghazni, South Ghazni, Chakhansur, Godzareh East, Godzareh West, and Namaksar-e-Herat AOIs and the Central Bamyan subarea of the South Bamyan AOI (datasets for South Bamyan were published previously in Casey and Chirico, 2013). For each AOI and subarea, this dataset collection consists of the areal extent boundaries, elevation contours at 25-, 50-, and 100-m intervals, and an enhanced DEM. Hydrographic datasets covering the extent of four AOIs and one subarea are also included in the collection. The resulting raster and vector layers are intended for use by government agencies, developmental organizations, and private companies in Afghanistan to support mineral assessments, monitoring, management, and investment.

Open-File Report↗
USGS2015

Testing a small UAS for mapping artisanal diamond mining sites in Africa

Remote sensing technology is advancing at an unprecedented rate. At the forefront of the new technological developments are unmanned aircraft systems (UAS). The advent of small, lightweight, low-cost, and user-friendly UAS is greatly expanding the potential applications of remote sensing technology and improving the set of tools available to researchers seeking to map and monitor terrain from above. In this article, we explore the applications of a small UAS for mapping informal diamond mining sites in Africa. We found that this technology provides aerial imagery of unparalleled resolution in a data-sparse, difficult to access, and remote terrain.

Photogrammetric Engineering and Remote Sensing↗
USGS2014

A sub-national scale geospatial analysis of diamond deposit lootability: the case of the Central African Republic

The Central African Republic (CAR), a country with rich diamond deposits and a tumultuous political history, experienced a government takeover by the Seleka rebel coalition in 2013. It is within this context that we developed and implemented a geospatial approach for assessing the lootability of high value-to-weight resource deposits, using the case of diamonds in CAR as an example. According to current definitions of lootability, or the vulnerability of deposits to exploitation, CAR's two major diamond deposits are similarly lootable. However, using this geospatial approach, we demonstrate that the deposits experience differing political geographic, spatial location, and cultural geographic contexts, rendering the eastern deposits more lootable than the western deposits. The patterns identified through this detailed analysis highlight the geographic complexities surrounding the issue of conflict resources and lootability, and speak to the importance of examining these topics at the sub-national scale, rather than relying on national-scale statistics.

The Extractive Industries and Society↗
USGS2014

A methodological toolkit for field assessments of artisanally mined alluvial diamond deposits

This toolkit provides a standardized checklist of critical issues relevant to artisanal mining-related field research. An integrated sociophysical geographic approach to collecting data at artisanal mine sites is outlined. The implementation and results of a multistakeholder approach to data collection, carried out in the assessment of Guinea’s artisanally mined diamond deposits, also are summarized. This toolkit, based on recent and successful field campaigns in West Africa, has been developed as a reference document to assist other government agencies or organizations in collecting the data necessary for artisanal diamond mining or similar natural resource assessments.

Techniques and Methods↗
USGS2014

The role of conflict minerals, artisanal mining, and informal trading networks in African intrastate and regional conflicts

The relationship between natural resources and armed conflict gained public and political attention in the 1990s, when it became evident that the mining and trading of diamonds were connected with brutal rebellions in several African nations. Easily extracted resources such as alluvial diamonds and gold have been and continue to be exploited by rebel groups to fund their activities. Artisanal and small-scale miners operating under a quasi-legal status often mine these mineral deposits. While many African countries have legalized artisanal mining and established flow chains through which production is intended to travel, informal trading networks frequently emerge in which miners seek to evade taxes and fees by selling to unauthorized buyers. These networks have the potential to become international in scope, with actors operating in multiple countries. The lack of government control over the artisanal mining sector and the prominence of informal trade networks can have severe social, political, and economic consequences. In the past, mineral extraction fuelled violent civil wars in Sierra Leone, Liberia, and Angola, and it continues to do so today in several other countries. The significant influence of the informal network that surrounds artisanal mining is therefore an important security concern that can extend across borders and have far-reaching impacts.

Small Wars Journal↗
USGS2013

Accuracy evaluation of an ASTER-Derived Global Digital Elevation Model (GDEM) Version 1 and Version 2 for two sites in western Africa

This study compares the ASTER Global DEM version 1 (GDEMv1) and version 2 (GDEMv2) for two study sites with distinct terrain and land cover characteristics in western Africa. The effects of land cover, slope, relief, and stack number are evaluated through both absolute and relative DEM statistical comparisons. While GDEMv2 at times performed better than GDEMv1, this improvement was not consistent, revealing the complex nature and interaction of terrain and land cover characteristics, which influences the accuracy of GDEM tiles on local and regional scales.

Akwatia;K�ni�ba↗
USGS2013

The influence of geomorphology on the role of women at artisanal and small-scale mine sites

The geologic and geomorphic expressions of a mineral deposit determine its location, size, and accessibility, characteristics which in turn greatly influence the success of artisans mining the deposit. Despite this critical information, which can be garnered through studying the surficial physical expression of a deposit, the geologic and geomorphic sciences have been largely overlooked in artisanal mining-related research. This study demonstrates that a correlation exists between the roles of female miners at artisanal diamond and gold mining sites in western and central Africa and the physical expression of the deposits. Typically, women perform ore processing and ancillary roles at mine sites. On occasion, however, women participate in the extraction process itself. Women were found to participate in the extraction of ore only when a deposit had a thin overburden layer, thus rendering the mineralized ore more accessible. When deposits required a significant degree of manual labour to access the ore due to thick overburden layers, women were typically relegated to other roles. The identification of this link encourages the establishment of an alternative research avenue in which the physical and social sciences merge to better inform policymakers, so that the most appropriate artisanal mining assistance programs can be developed and implemented.

Natural Resources Forum↗
USGS2013

Reconnaissance investigation of the placer gold deposits in the Zarkashan Area of Interest, Ghazni Province, Afghanistan

This study is a reconnaissance investigation of the placer gold deposits in the Zarkashan Area of Interest (AOI) in Ghazni Province, Afghanistan. Detailed investigations of the Zarkashan gold deposits were conducted by Soviet and Afghan geologists in the 1960s and 1970s, prior to the development of satellite-based remote-sensing platforms and new methods of geomorphic mapping. The purpose of this study was to integrate new mapping techniques with previously collected concentration and borehole sampling data and geomorphologic interpretations to reassess the placer gold deposits in the Zarkashan AOI. A methodology combining the collection and analysis of historical sampling data, digital database development, hydrologic analysis, and geomorphic modeling was used. The analysis led to the reinterpretation of four gold-bearing seams along the Zarkashan River, and the calculation of an estimated gold reserve of approximately 3,000 kilograms (kg). This estimate is approximately 1,500 kg greater than the Soviet estimate. The result differs in large part due to the reinterpretation of the seams based on a much lower cutoff grade of 100 mg/m 3 . Because cutoff grade is dependent in part on the price of gold, the sevenfold increase in the price of gold since the undertaking of the Soviet investigation warranted our re-evaluation of their 500 mg/m 3 cutoff grade.

Ghazni Province↗
USGS2013

Reconnaissance investigation of the alluvial gold deposits in the North Takhar Area of Interest, Takhar Province, Afghanistan

This study is a reconnaissance assessment of the alluvial gold deposits of the North Takhar Area of Interest (AOI) in Takhar Province, Afghanistan. Soviet and Afghan geologists collected data and calculated the gold deposit reserves in Takhar Province in the 1970s, prior to the development of satellite-based remote-sensing platforms and new methods of geomorphic mapping. The purpose of this study was to integrate new mapping techniques with previously collected borehole sampling and concentration sampling data and geomorphologic interpretations to reassess the alluvial gold placer deposits in the North Takhar AOI. Through a combination of historical borehole and cross-section data and digital terrain modeling, the Samti, Nooraba-Khasar-Anjir, and Kocha River placer deposits were reassessed. Resource estimates were calculated to be 20,927 kilograms (kg) for Samti, 7,626 kg for Nooraba-Khasar-Anjir, 160 kg for the mouth of the Kocha, 1,047 kg for the lower Kocha, 113 kg for the middle Kocha, and 168 kg for the upper Kocha. Previous resource estimates conducted by the Soviets for the Samti and Nooraba-Khasar-Anjir deposits estimated 30,062 kg and 802 kg of gold, respectively. This difference between the new estimates and previous estimates results from the higher resolution geomorphic model and the interpretation of areas outside of the initial work zone studied by Soviet and Afghan geologists.

Takhar Province↗
USGS2013

Reconnaissance investigation of the rough diamond resource potential and production capacity of Côte d’Ivoire

Ethnic and political conflict developed into open civil war in Côte d’Ivoire in 2002, leading to a de facto partitioning of the country into the government-controlled south and the rebel-controlled north. Côte d’Ivoire’s two main diamond mining areas, Séguéla and Tortiya, are located in the north, under what was, until recently, rebel-controlled territory. In an effort to prevent proceeds from diamond mining from funding the conflict, the United Nations (UN) placed an embargo on the export of rough diamonds from Côte d’Ivoire in 2005. That same year, the Kimberley Process (KP), the international initiative charged with stemming the flow of conflict diamonds, acted to enforce this ban by adopting the Moscow Resolution on Côte d’Ivoire, which contained measures to prevent the infiltration of Ivorian diamonds into the legitimate global rough diamond trade. Though under scrutiny by the international community, diamond mining activities continued in Côte d’Ivoire, with artisanal miners exploiting both alluvial deposits in fluvial systems and primary kimberlitic dike deposits. However, because of the embargo, there has been no official record of diamond production since the conflict began in 2002. This lack of production statistics represents a significant data gap and hinders efforts by the KP to understand how illicitly produced diamonds may be entering the legitimate trade. This study presents the results of a multiyear effort to monitor the diamond mining activities of Côte d’Ivoire’s two main diamond mining areas, Séguéla and Tortiya. An innovative approach was developed that integrates data acquired from archival reports and maps, high-resolution satellite imagery, and digital terrain modeling to assess the total diamond endowment of the Séguéla and Tortiya deposits and to calculate annual diamond production from 2006 to 2013. On the basis of currently available data, this study estimates that a total of 10,100,000 carats remain in Séguéla and a total of 1,100,000 carats remain in Tortiya. Production capacity was calculated for the two study areas for the years 2006–2010 and 2012–2013. Production capacity was found to range from between 38,000 carats and 375,000 carats in Séguéla and from 13,000 carats and 20,000 carats in Tortiya. Further, this study demonstrates that artisanal mining activities can be successfully monitored by using remote sensing and geologic modeling techniques. The production capacity estimates presented here fill a significant data gap and provide policy makers, the UN, and the KP with important information not otherwise available.

Scientific Investigations Report↗
USGS2012

A methodology for conducting national-scale alluvial diamond resource potential and production capacity assessments, with a focus on artisanal mining

In May of 2000, a meeting was convened in Kimberley, South Africa, by representatives of the diamond industry and leaders of African governments to develop a certification process intended to assure that export shipments of rough diamonds were free of conflict concerns. Outcomes of the meeting were formally supported later in December of 2000 by the United Nations in a resolution adopted by the General Assembly. By 2002, the Kimberley Process Certification Scheme was ratified and signed by diamond-producing and diamond-importing countries. As of August 2012, the Kimberley Process (KP) had 51 participants representing 77 countries. It is often difficult to obtain independent verification of the diamond production statistics that are provided to the KP. However, some degree of independent verification can be obtained through an understanding of a country’s naturally occurring endowment of diamonds and the intensity of mining activities. Studies that integrate these two components can produce a range of estimated values for a country’s diamond production, and these estimates can then be compared to the production statistics released by that country. This methodology is used to calculate (1) the diamond resource potential of a country, which refers to the total number of carats estimated to be remaining in the country, and (2) the diamond production capacity of a country, which is the current volume of diamonds that may realistically be produced per year utilizing current human and physical resources. The following sections outline the methodology used by the U.S. Geological Survey (USGS) to perform diamond assessments in Mali, the Central African Republic, Ghana, and Guinea.

Fact Sheet↗
USGS2012

Summary of the diamond resource potential and production capacity assessment of Guinea

In May of 2000, a meeting was convened in Kimberley, South Africa, by representatives of the diamond industry and leaders of African governments to develop a certification process intended to assure that export shipments of rough diamonds were free of conflict concerns. Outcomes of the meeting were formally supported later in December of 2000 by the United Nations in a resolution adopted by the General Assembly. By 2002, the Kimberley Process Certification Scheme (KPCS) was ratified and signed by diamond-producing and diamond-importing countries. As of August 2012, the Kimberley Process (KP) had 51 participants representing 77 countries. With the passing of the AD, the Plenary agreed that further efforts should be made to assess Guinea's diamond production capacity. In support of this objective, the U.S. Geological Survey (USGS) partnered with the Kimberley Process Working Group of Diamond Experts (WGDE) and Guinea's Ministry of Mines and Geology (MMG) to conduct a field campaign in Guinea from April 24 through May 2, 2010. The field team was composed of Mark Van Bockstael of the WGDE, Peter Chirico of the USGS, and several geologists from the MMG. The team visited diamond mining sites in western Guinea's Kindia, Forècariah, Coyah, and Tèlimèlè Prefectures, in which the Guinean government identified newly discovered deposits mined by artisans. Several mining sites within the Kissidougou Prefecture in southeastern Guinea were also visited as part of this study. Geologic and geomorphic information on the diamond deposits was collected at each site. The fieldwork conducted during this trip served as a means of acquiring critical data needed to conduct a full assessment of diamond resources and production capacity.

Fact Sheet↗
USGS2012

Summary of the reconnaissance investigation of the diamond resource potential and production capacity of Côte d’Ivoire

This study presents the results of a multiyear effort to monitor the diamond mining activities of Côte d’Ivoire’s two main diamond regions, Séguéla and Tortiya. The innovative approach developed for this study integrates archival reports and maps, high-resolution satellite imagery, and terrain modeling to assess the diamond resource potential and production capacity of the Séguéla and Tortiya deposits. A geologic resource assessment was conducted to calculate the remaining diamond reserves for Séguéla and Tortiya using archival geologic data, including gravel grade and thickness recorded by the Ivorian mining company Société pour le Développement Minier (SODEMI). These data were combined with terrain analysis and geomorphological maps in a geological process-driven model. After accounting for previous production, a total of 10,100,000 carats are estimated to be remaining in Séguéla and a total of 1,100,000 carats are estimated to be remaining in Tortiya, based on currently known deposits.

Fact Sheet↗
USGS2012

Alluvial diamond resource potential and production capacity assessment of Guinea

In May of 2000, a meeting was convened in Kimberley, South Africa, by representatives of the diamond industry and leaders of African governments to develop a certification process intended to assure that export shipments of rough diamonds were free of conflict concerns. Outcomes of the meeting were formally supported later in December of 2000 by the United Nations in a resolution adopted by the General Assembly. By 2002, the Kimberley Process Certification Scheme (KPCS) was ratified and signed by diamond-producing and diamond-importing countries. The goal of this study was to estimate the alluvial diamond resource endowment and the current production capacity of the alluvial diamond mining sector of Guinea. A modified volume and grade methodology was used to estimate the remaining diamond reserves within Guinea's diamondiferous regions, while the diamond-production capacity of these zones was estimated by inputting the number of artisanal miners, the number of days artisans work per year, and the average grade of the deposits into a formulaic expression. Guinea's resource potential was estimated to be approximately 40 million carats, while the production capacity was estimated to lie within a range of 480,000 to 720,000 carats per year. While preliminary results have been produced by integrating historical documents, five fieldwork campaigns, and remote sensing and GIS analysis, significant data gaps remain. The artisanal mining sector is dynamic and is affected by a variety of internal and external factors. Estimates of the number of artisans and deposit variables, such as grade, vary from site to site and from zone to zone. This report has been developed on the basis of the most detailed information available at this time. However, continued fieldwork and evaluation of artisanally mined deposits would increase the accuracy of the results.

Scientific Investigations Report↗
USGS2010

Alluvial Diamond Resource Potential and Production Capacity Assessment of Ghana

In May of 2000, a meeting was convened in Kimberley, South Africa, and attended by representatives of the diamond industry and leaders of African governments to develop a certification process intended to assure that rough, exported diamonds were free of conflictual concerns. This meeting was supported later in 2000 by the United Nations in a resolution adopted by the General Assembly. By 2002, the Kimberley Process Certification Scheme (KPCS) was ratified and signed by both diamond-producing and diamond-importing countries. Over 70 countries were included as members at the end of 2007. To prevent trade in 'conflict' diamonds while protecting legitimate trade, the KPCS requires that each country set up an internal system of controls to prevent conflict diamonds from entering any imported or exported shipments of rough diamonds. Every diamond or diamond shipment must be accompanied by a Kimberley Process (KP) certificate and be contained in tamper-proof packaging. The objective of this study was to assess the alluvial diamond resource endowment and current production capacity of the alluvial diamond-mining sector in Ghana. A modified volume and grade methodology was used to estimate the remaining diamond reserves within the Birim and Bonsa diamond fields. The production capacity of the sector was estimated using a formulaic expression of the number of workers reported in the sector, their productivity, and the average grade of deposits mined. This study estimates that there are approximately 91,600,000 carats of alluvial diamonds remaining in both the Birim and Bonsa diamond fields: 89,000,000 carats in the Birim and 2,600,000 carats in the Bonsa. Production capacity is calculated to be 765,000 carats per year, based on the formula used and available data on the number of workers and worker productivity. Annual production is highly dependent on the international diamond market and prices, the numbers of seasonal workers actively mining in the sector, and environmental conditions, which influence seasonal farming.

Scientific Investigations Report↗