Geology topics

Katharine F. Bull

Publications and source records attributed to Katharine F. Bull.

6 recordsLinked to original sources

USGS2020

2016 Volcanic activity in Alaska—Summary of events and response of the Alaska Volcano Observatory

The Alaska Volcano Observatory responded to eruptions, volcanic unrest or suspected unrest, and seismic events at 15 volcanic centers in Alaska during 2016. The most notable volcanic activity consisted of eruptions at Pavlof and Bogoslof volcanoes. Both eruptions produced significant ash clouds that affected regional air travel. Mount Cleveland continued a pattern of dome growth followed by explosion, producing very short-lived ash clouds. An eruptive period at Shishaldin Volcano ended in 2016.

Alaska↗

USGS2013

Photogrammetric monitoring of lava dome growth during the 2009 eruption of Redoubt Volcano

The 2009 eruption of Redoubt Volcano, Alaska, began with a phreatic explosion on 15 March followed by a series of at least 19 explosive events and growth and destruction of at least two, and likely three, lava domes between 22 March and 4 April. On 4 April explosive activity gave way to continuous lava effusion within the summit crater. We present an analysis of post-4 April lava dome growth using an oblique photogrammetry approach that provides a safe, rapid, and accurate means of measuring dome growth. Photogrammetric analyses of oblique digital images acquired during helicopter observation flights and fixed-wing volcanic gas surveys produced a series of digital elevation models (DEMs) of the lava dome from 16 April to 23 September. The DEMs were used to calculate estimates of volume and time-averaged extrusion rates and to quantify morphological changes during dome growth. Effusion rates ranged from a maximum of 35 m 3 s − 1 during the initial two weeks to a low of 2.2 m 3 s − 1 in early summer 2009. The average effusion rate from April to July was 9.5 m 3 s − 1 . Early, rapid dome growth was characterized by extrusion of blocky lava that spread laterally within the summit crater. In mid-to-late April the volume of the dome had reached 36 × 10 6 m 3 , roughly half of the total volume, and dome growth within the summit crater began to be limited by confining crater walls to the south, east, and west. Once the dome reached the steep, north-sloping gorge that breaches the crater, growth decreased to the south, but the dome continued to inflate and extend northward down the gorge. Effusion slowed during 16 April–1 May, but in early May the rate increased again. This rate increase was accompanied by a transition to exogenous dome growth. From mid-May to July the effusion rate consistently declined. The decrease is consistent with observations of reduced seismicity, gas emission, and thermal anomalies, as well as declining rates of geodetic deflation or inflation. These trends suggest dome growth ceased by July 2009. The volume of the dome at the end of the 2009 eruption was about 72 × 10 6 m 3 , more than twice the estimated volume of the largest dome extruded during the 1989–1990 eruption. In total, the 2009 dome extends over 400 m down the glacial gorge on the north end of the crater, with a total length of 1 km, width of 500 m and an average thickness of 200 m.

Alaska↗

USGS2013

Andesites of the 2009 eruption of Redoubt Volcano, Alaska

Crystal-rich andesites that erupted from Redoubt Volcano in 2009 range from 57.5 to 62.5 wt.% SiO 2 and have phenocryst and phenocryst-melt relations consistent with staging in the upper crust. Early explosive products are low-silica andesites (LSA, < 58 wt.% SiO 2 ) that ascended from deeper crustal levels during or before the 6 months of precursory activity, but a broad subsequent succession to more evolved and cooler products, and predominantly effusive dome growth, are interpreted to result from progressive mobilization and mixing with differentiated magmas tapped from pre-2009 Redoubt intrusions at ~ 3–6 km depth. Initial explosions on March 23–28 ejected predominantly LSA with a uniform phenocryst assemblage of high-Al amphibole, ~ An 70 plagioclase, ortho- and clinopyroxene, FeTi oxides (890 to 960 °C), and traces of magmatic sulfide. Melt in the dominant microlite-poor LSA was compositionally uniform dacite (67–68 wt.% SiO 2 ) but ranged to rhyolite with greater microlite growth. Minor amounts of intermediate- to high-silica andesite (ISA, HSA; 59–62.5 wt.% SiO 2 ) also erupted during the early explosions and most carried rhyolitic melt (72–74 wt.% SiO 2 ). A lava dome grew following the initial tephra-producing events but was destroyed by an explosion on April 4. Ejecta from the April 4 explosion consists entirely of ISA and HSA, as does a subsequent lava dome that grew April 4–July 1; LSA was absent. Andesites from the April 4 event and from the final dome had pre-eruptive temperatures of 725–840 °C (FeTi oxides) and highly evolved matrix liquids (77–80 wt.% SiO 2 ), including in rare microlite-free pyroclasts. ISA has mixed populations of phenocrysts suggesting it is a hybrid between HSA and LSA. The last lavas from the 2009 eruption, effused May 1–July 1, are distinctly depleted in P 2 O 5 , consistent with low temperatures and high degrees of crystallization including apatite. Plagioclase–melt hygrometry and comparison to phase equilibrium experiments are consistent with pre-eruptive storage of all three magma types at 100–160 MPa (4–6 km depth), if they were close to H 2 O-saturation, coincident with the locus of shallow syn-eruptive seismicity. Deeper storage would be indicated if the magmas were CO 2 -rich. Relatively coarse-grained clinopyroxene-rich reaction rims on many LSA amphibole phenocrysts may result from slow ascent to, or storage at, depths shallow enough for the onset of appreciable H 2 O exsolution, consistent with pre-eruptive staging in the uppermost crust. We interpret that the 2009 LSA ascended from depth during the 8 or more months prior to the first eruption, but that the magma stalled and accumulated in the upper crust where its phenocryst rim and melt compositions were established. Ascent of LSA through stagnant mushy intrusions residual from earlier Redoubt activity mobilized differentiated magma pockets and interstitial liquids represented by HSA, and as LSA–HSA hybrids represented by ISA, that fed the subsequently erupted lava domes.

Alaska↗

USGS2013

Emplacement of the final lava dome of the 2009 eruption of Redoubt Volcano, Alaska

After more than 8 months of precursory activity and over 20 explosions in 12 days, Redoubt Volcano, Alaska began to extrude the fourth and final lava dome of the 2009 eruption on April 4. By July 1 the dome had filled the pre-2009 summit crater and ceased to grow. By means of analysis and annotations of time-lapse webcam imagery, oblique-image photogrammetry techniques and capture and analysis of forward-looking infrared (FLIR) images, we tracked the volume, textural, effusive-style and temperature changes in near-real time over the entire growth period of the dome. The first month of growth (April 4–May 4) produced blocky intermediate- to high-silica andesite lava (59–62.3 wt.% SiO 2 ) that initially formed a round dome, expanding by endogenous growth, breaking the surface crust in radial fractures and annealing them with warmer, fresh lava. On or around May 1, more finely fragmented and scoriaceous andesite lava (59.8–62.2 wt.% SiO 2 ) began to appear at the top of the dome coincident with increased seismicity and gas emissions. The more scoriaceous lava spread radially over the dome surface, while the dome continued to expand from endogenous growth and blocky lava was exposed on the margins and south side of the dome. By mid-June the upper scoriaceous lava had covered 36% of the dome surface area. Vesicularity of the upper scoriaceous lava range from 55 to 66%, some of the highest vesicularity measurements recorded from a lava dome. We suggest that the stability of the final lava dome primarily resulted from sufficient fracturing and clearing of the conduit by preceding explosions that allowed efficient degassing of the magma during effusion. The dome was thus able to grow until it was large enough to exceed the magmastatic pressure in the chamber, effectively shutting off the eruption.

Alaska↗

USGS2013

Volcano–ice interactions precursory to the 2009 eruption of Redoubt Volcano, Alaska

In late summer of 2008, after nearly 20 years of quiescence, Redoubt Volcano began to show signs of abnormal heat flow in its summit crater. In the months that followed, the excess heat triggered melting and ablation of Redoubt's glaciers, beginning at the summit and propagating to lower elevations as the unrest accelerated. A variety of morphological changes were observed, including the creation of ice cauldrons, areas of wide-spread subsidence, punctures in the ice carved out by steam, and deposition from debris flows. In this paper, we use visual observations, satellite data, and a high resolution digital elevation model of the volcanic edifice to calculate ice loss at Redoubt as a function of time. Our aim is to establish from this time series a proxy for heat flow that can be compared to other data sets collected along the same time interval. Our study area consists of the Drift glacier, which flows from the summit crater down the volcano's north slope, and makes up about one quarter of Redoubt's total ice volume of ~ 4 km 3 . The upper part of the Drift glacier covers the area of recent volcanism, making this part of ice mass most susceptible to the effect of volcanic heating. Moreover, melt water and other flows are channeled down the Drift glacier drainage by topography, leaving the remainder of Redoubt's ice mantle relatively unaffected. The rate of ice loss averaged around 0.1 m 3 /s over the last four months of 2008, accelerated to over twenty times this value by February 2009, and peaked at greater than 22 m 3 /s, just prior to the first major explosion on March 22, 2009. We estimate a cumulative ice loss over this period of about 35 million cubic meters (M m 3 ).

Alaska↗

USGS2010

Timing, distribution, and volume of proximal products of the 2006 eruption of Augustine Volcano: Chapter 8 in The 2006 eruption of Augustine Volcano, Alaska

During and after the 2006 eruption of Augustine Volcano, we compiled a geologic map and chronology of new lava and flowage deposits using observational flights, oblique and aerial photography, infrared imaging, satellite data, and field investigations. After approximately 6 months of precursory activity, the explosive phase of the eruption commenced with two explosions on January 11, 2006 (events 1 and 2) that produced snow-rich avalanches; little or no juvenile magma was erupted. Seismicity suggests that a small lava dome may have extruded on January 12, but, if so, it was subsequently destroyed. A series of six explosions on January 13–14 (events 3–8) produced widespread but thin (0–30 cm) pyroclastic-current deposits on the upper flanks above 300 m altitude and lobate, 0.5- to 2-m-thick pyroclastic flows that traveled down most flanks of the volcano. Between January 14 and 17, a smooth lava lobe formed in the east half of the roughly 400-m-wide summit crater and was only partially covered by later deposits. An explosion on January 17 (event 9) opened a crater in the new lava dome and produced a ballistic fall deposit and pyroclastic flow on the southwest flank. During the interval from January 17 to 27, a rubbly lava dome effused. On January 27, explosive event 10 generated a pyroclastic current that left a deposit, rich in dense clasts, on the north-northwest flank. Immediately following the pyroclastic current, a voluminous 4.7-km-long pyroclastic flow swept down the north flank. Three more explosive blasts on January 27 and 28 produced unknown but likely minor on-island deposits. The cumulative volume of erupted material from the explosive phase, including domes, flows, and fall deposits (Wallace and others, this volume), was 30×10 6 m 3 dense-rock equivalent (DRE). The continuous phase of the eruption (January 28 through February 10) began with a 4-day period of nearly continuous block-and-ash flows, which deposited small individual flow lobes that cumulatively formed fans to the north and northeast of the summit. A single larger pyroclastic flow on January 30 formed a braided deposit on the northwest flank. Roughly 9×10 6 m 3 (DRE) of magma erupted during this period. Around February 2, the magma flux rate waned and a northward lava flow effused and reached a length of approximately 900 m by February 10. Approximately 11×10 6 m 3 (DRE) of magma erupted during the second half of the continuous phase. After a 23-day hiatus, lava effusion recommenced in early March (the effusive phase) and was accompanied by frequent (but volumetrically minor) block-and-ash flows. From March 7 to 14, extrusion increased markedly; two blocky lava-flow lobes, each tens of meters thick, moved down the north and northeast flank of the volcano; and a new summit lava dome grew to be ~70 m taller than the pre-2006 summit. This phase produced 26×10 6 m 3 (DRE) of lava. Active effusion had ceased about March 16, but, in April and May, three gravitational collapses from the west margin of the north lava flow produced additional block-and-ash flows. The basic sequence of the 2006 eruption closely matches that of eruptions in 1976 and 1986.

Alaska↗