USGS ScienceSearch

Geology topics

K. Hudnut

Publications and source records attributed to K. Hudnut.

12 recordsLinked to original sources

Geomorphic and geologic controls of geohazards induced by Nepal’s 2015 Gorkha earthquake

The Gorkha earthquake (magnitude 7.8) on 25 April 2015 and later aftershocks struck South Asia, killing ~9000 people and damaging a large region. Supported by a large campaign of responsive satellite data acquisitions over the earthquake disaster zone, our team undertook a satellite image survey of the earthquakes’ induced geohazards in Nepal and China and an assessment of the geomorphic, tectonic, and lithologic controls on quake-induced landslides. Timely analysis and communication aided response and recovery and informed decision-makers. We mapped 4312 coseismic and postseismic landslides. We also surveyed 491 glacier lakes for earthquake damage but found only nine landslide-impacted lakes and no visible satellite evidence of outbursts. Landslide densities correlate with slope, peak ground acceleration, surface downdrop, and specific metamorphic lithologies and large plutonic intrusions.

Science

Superficial simplicity of the 2010 El Mayorg-Cucapah earthquake of Baja California in Mexico

The geometry of faults is usually thought to be more complicated at the surface than at depth and to control the initiation, propagation and arrest of seismic ruptures 1 , 2 , 3 , 4 , 5 , 6 . The fault system that runs from southern California into Mexico is a simple strike-slip boundary: the west side of California and Mexico moves northwards with respect to the east. However, the M w 7.2 2010 El Mayor–Cucapah earthquake on this fault system produced a pattern of seismic waves that indicates a far more complex source than slip on a planar strike-slip fault 7 . Here we use geodetic, remote-sensing and seismological data to reconstruct the fault geometry and history of slip during this earthquake. We find that the earthquake produced a straight 120-km-long fault trace that cut through the Cucapah mountain range and across the Colorado River delta. However, at depth, the fault is made up of two different segments connected by a small extensional fault. Both segments strike N130° E, but dip in opposite directions. The earthquake was initiated on the connecting extensional fault and 15 s later ruptured the two main segments with dominantly strike-slip motion. We show that complexities in the fault geometry at depth explain well the complex pattern of radiated seismic waves. We conclude that the location and detailed characteristics of the earthquake could not have been anticipated on the basis of observations of surface geology alone.

California, Arizona

The ShakeOut scenario: A hypothetical Mw7.8 earthquake on the Southern San Andreas Fault

In 2008, an earthquake-planning scenario document was released by the U.S. Geological Survey (USGS) and California Geological Survey that hypothesizes the occurrence and effects of a M w 7.8 earthquake on the southern San Andreas Fault. It was created by more than 300 scientists and engineers. Fault offsets reach 13 m and up to 8 m at lifeline crossings. Physics-based modeling was used to generate maps of shaking intensity, with peak ground velocities of 3 m/sec near the fault and exceeding 0.5 m/sec over 10,000 km 2 . A custom HAZUS ®MH analysis and 18 special studies were performed to characterize the effects of the earthquake on the built environment. The scenario posits 1,800 deaths and 53,000 injuries requiring emergency room care. Approximately 1,600 fires are ignited, resulting in the destruction of 200 million square feet of the building stock, the equivalent of 133,000 single-family homes. Fire contributes $ 87 billion in property and business interruption loss, out of the total $ 191 billion in economic loss, with most of the rest coming from shake-related building and content damage ( $ 46 billion) and business interruption loss from water outages ( $ 24 billion). Emergency response activities are depicted in detail, in an innovative grid showing activities versus time, a new format introduced in this study.

Calfornia

Complex rupture during the 12 January 2010 Haiti earthquake

Initially, the devastating Mw 7.0, 12 January 2010 Haiti earthquake seemed to involve straightforward accommodation of oblique relative motion between the Caribbean and North American plates along the Enriquillog-Plantain Garden fault zone. Here, we combine seismological observations, geologic field data and space geodetic measurements to show that, instead, the rupture process may have involved slip on multiple faults. Primary surface deformation was driven by rupture on blind thrust faults with only minor, deep, lateral slip along or near the main Enriquillog-Plantain Garden fault zone; thus the event only partially relieved centuries of accumulated left-lateral strain on a small part of the plate-boundary system. Together with the predominance of shallow off-fault thrusting, the lack of surface deformation implies that remaining shallow shear strain will be released in future surface-rupturing earthquakes on the Enriquillog-Plantain Garden fault zone, as occurred in inferred Holocene and probable historic events. We suggest that the geological signature of this earthquakeg-broad warping and coastal deformation rather than surface rupture along the main fault zoneg-will not be easily recognized by standard palaeoseismic studies. We conclude that similarly complex earthquakes in tectonic environments that accommodate both translation and convergenceg-such as the San Andreas fault through the Transverse Ranges of Californiag-may be missing from the prehistoric earthquake record. ?? 2010 Macmillan Publishers Limited. All rights reserved.

Nature Geoscience

Kinematic GPS solutions for aircraft trajectories: Identifying and minimizing systematic height errors associated with atmospheric propagation delays

When kinematic GPS processing software is used to estimate the trajectory of an aircraft, unless the delays imposed on the GPS signals by the atmosphere are either estimated or calibrated via external observations, then vertical height errors of decimeters can occur. This problem is clearly manifested when the aircraft is positioned against multiple base stations in areas of pronounced topography because the aircraft height solutions obtained using different base stations will tend to be mutually offset, or biased, in proportion to the elevation differences between the base stations. When performing kinematic surveys in areas with significant topography it should be standard procedure to use multiple base stations, and to separate them vertically to the maximum extent possible, since it will then be much easier to detect mis-modeling of the atmosphere. Copyright 2007 by the American Geophysical Union.

Geophysical Research Letters

Preliminary report on the 16 October 1999 M 7.1 Hector mine, California, earthquake

The M w 7.1 Hector Mine, California, earthquake occurred at 9:46 GMT on 16 October 1999. The event caused minimal damage because it was located in a remote, sparsely populated part of the Mojave Desert, approximately 47 miles east-southeast of Barstow, with epicentral coordinates 34.59°N 116.27°W and a hypocentral depth of 5 ± 3 km. Twelve foreshocks, M 1.9-3.8, preceded the mainshock during the previous twelve hours. All of these events were located close to the hypocenter of the mainshock. The Hector Mine earthquake occurred within the Eastern California Shear Zone (ECSZ). By virtue of its remote location, the societal impact of the Hector Mine earthquake was, fortunately, minimal in spite of the event's appreciable size. The ECSZ is characterized by high seismicity, a high tectonic strain rate, and a broad, distributed zone of north-northwest-trending faults (ECSZ; Figure 1 ; Dokka and Travis, 1990 ; Sauber et al., 1986 ; Sauber et al., 1994 ; Sieh et al., 1993 ). Data regarding the slip rates of faults within the ECSZ suggest that on the order of 15% of the Pacific-North American plate motion occurs along this zone ( Sauber et al., 1986 ; Wesnousky, 1986 ). Most of the faults in the ECSZ have low slip rates and long repeat times for major earthquakes, on the order of several thousands to tens of thousands of years. The occurrence of the Hector Mine earthquake within seven years and only about 30 km east of the 1992 M w 7.3 Landers earthquake suggests that the closely spaced surface faults in the ECSZ are mechanically related. The Hector Mine event involved rupture on two previously mapped fault zones—the Bullion Fault and an unnamed, more northerly-trending fault that is informally referred to in this paper as the Lavic Lake Fault (Dibblee, 1966 , 1967a , b ). Traces of the Bullion Fault exhibit evidence of Holocene displacement and were zoned as active in 1988 under California's Mquist-Priolo Earthquake Fault Zoning Act ( Hart and Bryant, 1997 ). The pattern of rupture along more than one named fault was also observed from the 1992 Landers earthquake ( Hauksson et al., 1993 ; Sieh et al., 1994). Much of the fault zone that produced the Hector Mine earthquake had been buried by relatively young stream deposits, and the fault scarps in bedrock have a subdued morphology. It appears that these faults have not experienced significant offset for perhaps 10,000 years or more ( Hart, 1987 ). Planned future investigations will refine the age of the last event on these faults. The portion of the Lavic Lake Fault that ruptured between the northern end of the Bullion Mountains and Lavic Lake had not previously been mapped. However, our field investigations have identified ancient, subdued fault scarps along portions of the 1999 rupture zone in this area. It thus appears that the entire segment of the Lavic Lake Fault that was involved in the 1999 event had ruptured in the past. As is typical for most faults within the Eastern California Shear Zone, the rate of movement along the Lavic Lake Fault may be quite slow (<1 mm/yr) and should produce earthquakes only infrequently. This event is a reminder that faults that have ruptured in late Quaternary time, but that lack evidence of Holocene displacement, can still produce earthquakes in this low-slip-rate tectonic setting. Additionally, the Hector Mine earthquake is noteworthy for a couple of other reasons. First, it clearly produced triggered seismicity over much of southern California, from the rupture zone toward the south-southwest in particular. Second, as we will discuss, the event may provide new data and insight into recently developed paradigms concerning earthquake interactions and the role of static stress changes. Questions such as these will, of course, be the subject of extensive detailed analyses in years to come. Fortunately, the Hector Mine sequence will provide one of the best data sets obtained to date for a significant earthquake in the United States. Because it occurred when major upgrades to both the regional seismic network (TriNet) and the regional geodetic network (SCIGN) were well underway, the Earth science community will have abundant high-quality data with which to explore the important and interesting questions that have been raised. In this paper, we present and discuss the basic data and preliminary results from the Hector Mine earthquake.

California

Stress loading from viscous flow in the lower crust and triggering of aftershocks following the 1994 Northridge, California, earthquake

Following the M(w) 6.7 Northridge earthquake, significant postseismic displacements were resolved with GPS. Using a three-dimensional viscoelastic model, we suggest that this deformation is mainly driven by viscous flow in the lower crust. Such flow can transfer stress to the upper crust and load the rupture zone of the main shock at a decaying rate. Most aftershocks within the rupture zone, especially those that occurred after the first several weeks of the main shock, may have been triggered by continuous stress loading from viscous flow. The long-term decay time of aftershocks (about 2 years) approximately matches the decay of viscoelastic loading, and thus is controlled by the viscosity of the lower crust. Our model provides a physical interpretation of the observed correlation between aftershock decay rate and surface heat flow.Following the Mw 6.7 Northridge earthquake, significant postseismic displacements were resolved with GPS. Using a three-dimensional viscoelastic model, we suggest that this deformation is mainly driven by viscous flow in the lower crust. Such flow can transfer stress to the upper crust and load the rupture zone of the main shock at a decaying rate. Most aftershocks within the rupture zone, especially those that occurred after the first several weeks of the main shock, may have been triggered by continuous stress loading from viscous flow. The long-term decay time of aftershocks (about 2 years) approximately matches the decay of viscoelastic loading, and thus is controlled by the viscosity of the lower crust. Our model provides a physical interpretation of the observed correlation between aftershock decay rate and surface heat flow.

Geophysical Research Letters

Poroelastic rebound along the Landers 1992 earthquake surface rupture

Maps of surface displacement following the 1992 Landers, California, earthquake, generated by interferometric processing of ERS-1 synthetic aperture radar (SAR) images, reveal effects of various postseismic deformation processes along the 1992 surface rupture. The large-scale pattern of the postseismic displacement field includes large lobes, mostly visible on the west side of the fault, comparable in shape with the lobes observed in the coseismic displacement field. This pattern and the steep displacement gradient observed near the Emerson-Camp Rock fault cannot be simply explained by afterslip on deep sections of the 1992 rupture. Models show that horizontal slip occurring on a buried dislocation in a Poisson's material produces a characteristic quadripole pattern in the surface displacement field with several centimeters of vertical motion at distances of 10–20 km from the fault, yet this pattern is not observed in the postseismic interferograms. As previously proposed to explain local strain in the fault step overs [ Peltzer et al ., 1996b], we argue that poroelastic rebound caused by pore fluid flow may also occur over greater distances from the fault, compensating the vertical ground shift produced by fault afterslip. Such a rebound is explained by the gradual change of the crustal rocks' Poisson's ratio value from undrained (coseismic) to drained (postseismic) conditions as pore pressure gradients produced by the earthquake dissipate. Using the Poisson's ratio values of 0.27 and 0.31 for the drained and undrained crustal rocks, respectively, elastic dislocation models show that the combined contributions of afterslip on deep sections of the fault and poroelastic rebound can account for the range change observed in the SAR data and the horizontal displacement measured at Global Positioning System (GPS) sites along a 60-km-long transect across the Emerson fault [ Savage and Svarc , 1997]. Using a detailed surface slip distribution on the Homestead Valley, Kickapoo, and Johnson Valley faults, we modeled the poroelastic rebound in the Homestead Valley pull apart. A Poisson's ratio value of 0.35 for the undrained gouge rocks in the fault zone is required to account for the observed surface uplift in the 3.5 years following the earthquake. This large value implies a seismic velocity ratio V p /V s of 2.1, consistent with the observed low V s values of fault zone guided waves at shallow depth [ Li et al ., 1997]. The SAR data also reveal postseismic creep along shallow patches of the Eureka Peak and Burnt Mountain faults with a characteristic decay time of 0.8 years. Coseismic, dilatant hardening (locking process) followed by post-seismic, pore pressure controlled fault creep provide a plausible mechanism to account for the decay time of the observed slip rate along this section of the fault.

Journal of Geophysical Research B: Solid Earth

The geodetic signature of the M8.0 Oct. 9, 1995, Jalisco subduction earthquake

The October, 1995 Mw 8.0 Jalisco subduction earthquake has provided a thorough geodetic observation of the coseismic subduction process. An 11 station regional GPS network located directly onshore of the rupture demonstrates consistent vertical subsidence verified by tide gauge data and southwest-directed extension, with measured displacements reaching 1 meter. Unusually shallow and non-uniform faulting is required to explain the displacements. We determine that up to 5 meters of slip occurred within the upper 15 km of the thrust fault zone and 2 meters possibly as shallow as 8 km, and that slip was likely distributed in two main patches. The paucity of continental sediments in this subduction zone could be responsible for the anomalously shallow faulting.

Geophysical Research Letters

Crustal deformation in southern California using SAR interferometry

By combining pairs of ERS-1/2 SAR images of Southern California spanning long time intervals (1-4 years), we were able to measure the rate of slow deformation processes along faults activated during the Landers 1992 earthquake. Interferograms revealed several centimeters of post-seismic rebound in step-overs of the 1992 break, with a characteristic decay rate of -280 days. We interpreted this process as due to pore fluid flow as pore pressure gradients caused by coseismic stress changes dissipate. The data also revealed evidence of after-slip on different sections of the fault. The southern branches of the 1992 break experienced surface creep producing sharp phase cuts hi the interferometric maps. The same approach was used in the Los Angeles basin, which is currently undergoing NS shortening at a rate of ???8 mm/yr. The tectonic signal in imerferograms of the Los Angeles basin is intermingled with signals due to other sources such as ground subsidence caused by oil and water withdrawal.

European Space Agency, (Special Publication) ESA S

The magnitude 6.7 Northridge, California, earthquake of 17 January 1994

The most costly American earthquake since 1906 struck Los Angeles on 17 January 1994. The magnitude 6.7 Northridge earthquake resulted from more than 3 meters of reverse slip on a 15-kilometer-long south-dipping thrust fault that raised the Santa Susana mountains by as much as 70 centimeters. The fault appears to be truncated by the fault that broke in the 1971 San Fernando earthquake at a depth of 8 kilometers. Of these two events, the Northridge earthquake caused many times more damage, primarily because its causative fault is directly under the city. Many types of structures were damaged, but the fracture of welds in steel-frame buildings was the greatest surprise. The Northridge earthquake emphasizes the hazard posed to Los Angeles by concealed thrust faults and the potential for strong ground shaking in moderate earthquakes.

Los Angeles

Near-field investigations of the Landers earthquake sequence, April to July 1992

The Landers earthquake, which had a moment magnitude ( M w ) of 7.3, was the largest earthquake to strike the contiguous United States in 40 years. This earthquake resulted from the rupture of five major and many minor right-lateral faults near the southern end of the eastern California shear zone, just north of the San Andreas fault. Its M w 6.1 preshock and M w 6.2 aftershock had their own aftershocks and foreshocks. Surficial geological observations are consistent with local and far-field seismologic observations of the earthquake. Large surficial offsets (as great as 6 meters) and a relatively short rupture length (85 kilometers) are consistent with seismological calculations of a high stress drop (200 bars), which is in turn consistent with an apparently long recurrence interval for these faults.

California