Geology topics

Jonathan M. G. Glen

Publications and source records attributed to Jonathan M. G. Glen.

At least 19 recordsLinked to original sources

USGS2018

Which geologic factors control permeability development in geothermal systems? The geologic structure of Dixie Valley

Geothermal systems occur where subsurface permeability and temperature are sufficiently high to drive fluid circulation. In the Great Basin region of the United States, which hosts ~20% of domestic geothermal electricity generation capacity and much of the projected undeveloped and undiscovered resource, crustal heat flow is relatively high, so permeability is the dominant factor controlling the occurrence or absence of a geothermal system. In the most general sense, fracture permeability along faults and/or networks of interconnected faults and fractures serves as a pathway for fluids upwelling from depth. Within the Great Basin, Dixie Valley hosts an anomalously high number of geothermal systems. It is unclear whether this relatively dense collection of systems is associated with regional strain or structural patterns, local structural or geological characteristics, basin hydrogeology, or some other factors. The relatively rich data-set available for Dixie Valley, and the well-studied nature of the area affords the opportunity to characterize the geologic and lithologic factors that control permeability development at the local scale. There are at least eleven distinct geothermal systems in Dixie Valley, NV. We utilize a wealth of existing data, which have been collected over several decades, to assess the geologic controls on geothermal fluid upwelling in these systems.

Geothermal Resources Council Transactions↗

USGS2018

New data yield new geologic insights at the Fallon FORGE site, Carson Sink Region, Nevada

The geologic structure beneath the Fallon Frontier Observatory for Research in Geothermal Energy (FORGE) site represents a record of the Mesozoic through Cenozoic tectonism, volcanism, and sedimentation that has affected the Carson Sink local to Fallon, NV. A robust dataset confirms that the lithologic sequence consists of Quaternary through Miocene sedimentary and volcanic rocks resting non-conformably on Mesozoic crystalline basement. The basement consists of four lithologic units; 1) Triassic-Jurassic low-to-medium grade meta-rhyolites, 2) Jurassic low-to-medium grade quartzites and other metamorphosed marine sedimentary rocks, and 3) Jurassic low-to-medium grade meta-basalt and -basaltic-andesite lavas, all intruded by 4) Jurassic-Cretaceous quartz monzonite. The geologic section dips ~20-25° west, tilting that was accommodated by a predominant system of north-to-north-northeast striking, east and west moderately-to-steeply dipping normal faults. The above, relatively broad-scale characteristics of the geologic framework of the Fallon site have been developed throughout the ~3 year duration of the project. With the collection of new data and re-analysis of existing data in Phase 2B of the Fallon FORGE project, our detailed understanding of the relatively finer-scale aspects of the geologic framework, including aspects of the stratigraphic sequence and the locations and attitudes of individual faults have evolved and an updated 3D geologic map has been developed. Here, we compare the Phase 1 3D geologic map to the Phase 2B 3D geologic map and demonstrate the evolution of our understanding of the geologic framework of the Fallon site and the value of the new data that was collected in Phase 2B in developing this updated framework.

Geothermal Resources Council Transactions↗

USGS2018

2D and 3D potential field mapping and modelling at the Fallon FORGE site, Nevada, USA

Accurate geological characterization of Fallon FORGE is important for preparing the site as an EGS laboratory. As part of this effort, a 3D geologic map was constructed previously from well logs, surface geologic mapping, 2D seismic profiles, interpreted gravity & magnetic maps, and a gravity-inferred basement surface. In this study, we have conducted both 2D and 3D modelling of high-resolution gravity and magnetic data (pre-existing and new) in an effort to further refine and test this 3D geologic map at Fallon. This effort enabled a direct comparison of the 2D and 3D model results. Potential field modelling was guided by rock-property measurements of samples from drill-core and outcrop from the Fallon area. In total, five 2D potential field model profiles, up to 30 km in length, were constructed that extend across the Fallon area. The 3D gravity model volume was 8 km (N-S) x 8 km (E-W) x 4 km (thick). The majority of the 3D gravity model volume had 100 m cubic cells; but cells near the land surface were 1 m thick to adequately capture topography. Overall, the 2D & 3D geophysical modelling largely confirmed the previously constructed 3D geologic map at Fallon for three reasons: 1) lithologic boundaries in the 2D & 3D density models mostly agree with those in the 3D geologic map, 2) the rock properties used in the models lie within the range of independent measurements made on representative rock samples from the region, and 3) the match between the observed and calculated anomalies are largely within the measurement error of the observed fields. In places where the geophysical and geologic models differ, geophysical model results have revealed subsurface structural features that have helped refine geologic interpretations which, in turn, lead to adjustments to the 3D geologic map. In this paper, we present the 2D & 3D geophysical model results and discuss how they were utilized to confirm and refine our 3D geologic understanding of the Fallon FORGE site.

Geothermal Resources Council Transactions↗

USGS2016

Geology and mineral resources of the Sheldon-Hart Mountain National Wildlife Refuge Complex (Oregon and Nevada), the Southeastern Oregon and North-Central Nevada, and the Southern Idaho and Northern Nevada (and Utah) Sagebrush Focal Areas: Chapter B in Mineral resources of the Sagebrush Focal Areas of Idaho, Montana, Nevada, Oregon, Utah, and Wyoming

Summary The U.S. Department of the Interior has proposed to withdraw approximately 10 million acres of Federal lands from mineral entry (subject to valid existing rights) from 12 million acres of lands defined as Sagebrush Focal Areas (SFAs) in Idaho, Montana, Nevada, Oregon, Utah, and Wyoming (for further discussion on the lands involved see Scientific Investigations Report 2016–5089–A). The purpose of the proposed action is to protect the greater sage-grouse ( Centrocercus urophasianus ) and its habitat from potential adverse effects of locatable mineral exploration and mining. The U.S. Geological Survey Sagebrush Mineral-Resource Assessment (SaMiRA) project was initiated in November 2015 and supported by the Bureau of Land Management to (1) assess locatable mineral-resource potential and (2) to describe leasable and salable mineral resources for the seven SFAs and Nevada additions. This chapter summarizes the current status of locatable, leasable, and salable mineral commodities and assesses the potential of selected locatable minerals in lands proposed for withdrawal that span the Nevada, Oregon, Idaho, and Utah borders. In this report, the four study areas evaluated were (1) the Sheldon-Hart Mountain National Wildlife Refuge Complex SFA in Washoe County, Nevada, and Harney and Lake Counties, Oregon; (2) the Southeastern Oregon and North-Central Nevada SFA in Humboldt County, Nevada, and Harney and Malheur Counties, Oregon; (3) the Southern Idaho and Northern Nevada SFA in Cassia, Owyhee, and Twin Falls Counties, Idaho, Elko County, Nevada, and Box Elder County, Utah; and (4) the Nevada additions in Humboldt and Elko Counties, Nevada.

Idaho, Nevada, Oregon, Utah↗

USGS2016

Geology and mineral resources of the North-Central Idaho Sagebrush Focal Area: Chapter C in Mineral resources of the Sagebrush Focal Areas of Idaho, Montana, Nevada, Oregon, Utah, and Wyoming

Summary The U.S. Department of the Interior has proposed to withdraw approximately 10 million acres of Federal lands from mineral entry (subject to valid existing rights) from 12 million acres of lands defined as Sagebrush Focal Areas (SFAs) in Idaho, Montana, Nevada, Oregon, Utah, and Wyoming (for further discussion on the lands involved see Scientific Investigations Report 2016–5089–A). The purpose of the proposed action is to protect the greater sage-grouse ( Centrocercus urophasianus ) and its habitat from potential adverse effects of locatable mineral exploration and mining. The U.S. Geological Survey Sagebrush Mineral-Resource Assessment (SaMiRA) project was initiated in November 2015 and supported by the Bureau of Land Management to (1) assess locatable mineral-resource potential and (2) to describe leasable and salable mineral resources for the seven SFAs and Nevada additions. This chapter summarizes the current status of locatable, leasable, and salable mineral commodities and assesses the potential of locatable minerals in the North-Central Idaho SFA, which extends from east-central to south-central Idaho. The geologically complex area is composed of many different rock units that locally contain potential mineral resources.

Idaho↗

USGS2016

Geology and mineral resources of the North-Central Montana Sagebrush Focal Area: Chapter D in Mineral resources of the Sagebrush Focal Areas of Idaho, Montana, Nevada, Oregon, Utah, and Wyoming

Summary The U.S. Department of the Interior has proposed to withdraw approximately 10 million acres of Federal lands from mineral entry (subject to valid existing rights) from 12 million acres of lands defined as Sagebrush Focal Areas (SFAs) in Idaho, Montana, Nevada, Oregon, Utah, and Wyoming (for further discussion on the lands involved see Scientific Investigations Report 2016–5089–A). The purpose of the proposed action is to protect the greater sage-grouse ( Centrocercus urophasianus ) and its habitat from potential adverse effects of locatable mineral exploration and mining. The U.S. Geological Survey Sagebrush Mineral-Resource Assessment (SaMiRA) project was initiated in November 2015 and supported by the Bureau of Land Management to (1) assess locatable mineral-resource potential and (2) to describe leasable and salable mineral resources for the seven SFAs and Nevada additions. This chapter summarizes the current status of locatable, leasable, and salable mineral commodities and assesses the potential of locatable minerals in the North-Central Montana SFA. The proposed withdrawal area that is evaluated in this report is located in north-central Montana, and includes parts of Fergus, Petroleum, Phillips, and Valley Counties.

Montana↗

USGS2016

Geology and mineral resources of the Southwestern and South-Central Wyoming Sagebrush Focal Area, Wyoming, and the Bear River Watershed Sagebrush Focal Area, Wyoming and Utah: Chapter E in Mineral resources of the Sagebrush Focal Areas of Idaho, Montana, Nevada, Oregon, Utah, and Wyoming

Wyoming, Utah↗

USGS2016

Analysis and interpretation of stress indicators in deviated wells of the Coso Geothermal Field

Characterizing the tectonic stress field is an integral part of the development of hydrothermal systems and especially for enhanced geothermal systems (EGS). With a well characterized stress field the propensity of fault slip on faults with known location and orientation can be identified. Faults that are critically oriented for faulting with respect to the stress field are known to provide natural fluid pathways. A high slip tendency makes a fault a likely candidate for reactivation during the creation of an EGS. Similarly, the stress state provides insight for the potential of larger, damaging earthquakes should extensive portions of well-oriented, larger faults be reactivated. The analysis of stress indicators such as drilling-induced fractures and borehole breakouts is the main tool to infer information on the stress state of a geothermal reservoir. The standard procedure is applicable to sub-vertical wellbore sections and highly deviated sections have to be discarded. However, in order to save costs and reduce the environmental impact most recent wells are directionally drilled with deviations that require appropriate consideration of the deviated trajectory. Here we present an analysis scheme applicable to arbitrary well trajectories or a combination of wells to infer the stress state. Through the sampling of the stress tensor along several directions additional information on the stress regime and even relative stress magnitudes can be obtained. We apply this method on image logs from the pair of wells 58-10 and 58A-10 that were drilled from the same well pad. Both wells have image logs of about 2km of their trajectories that are separated by less than 300m. For both wells we obtain a mean orientation of S Hmax of N23° with large standard deviations of locations of stress indicators of 24° and 26°, respectively. While the local stress direction is highly variable along both wells with dominant wavelengths from around 50 to 500m, the mean directions are very consistent and also agree with previous stress estimates in the eastern part of the Coso Geothermal Field. In order to obtain a reliable estimation of the stress orientation in this setting, it is necessary to sample the stress field on an interval long to capture several of the dominant wavelengths.

California↗

USGS2015

Differentiating induced and natural seismicity using space-time-magnitude statistics applied to the Coso Geothermal field

A remarkable characteristic of earthquakes is their clustering in time and space, displaying their self-similarity. It remains to be tested if natural and induced earthquakes share the same behavior. We study natural and induced earthquakes comparatively in the same tectonic setting at the Coso Geothermal Field. Covering the preproduction and coproduction periods from 1981 to 2013, we analyze interevent times, spatial dimension, and frequency-size distributions for natural and induced earthquakes. Individually, these distributions are statistically indistinguishable. Determining the distribution of nearest neighbor distances in a combined space-time-magnitude metric, lets us identify clear differences between both kinds of seismicity. Compared to natural earthquakes, induced earthquakes feature a larger population of background seismicity and nearest neighbors at large magnitude rescaled times and small magnitude rescaled distances. Local stress perturbations induced by field operations appear to be strong enough to drive local faults through several seismic cycles and reactivate them after time periods on the order of a year.

California↗

USGS2015

Natural or Induced: Identifying Natural and Induced Swarms from Pre-production and Co-production Microseismic Catalogs at the Coso Geothermal Field

Increased levels of seismicity coinciding with injection of reservoir fluids have prompted interest in methods to distinguish induced from natural seismicity. Discrimination between induced and natural seismicity is especially difficult in areas that have high levels of natural seismicity, such as the geothermal fields at the Salton Sea and Coso, both in California. Both areas show swarm-like sequences that could be related to natural, deep fluid migration as part of the natural hydrothermal system. Therefore, swarms often have spatio-temporal patterns that resemble fluid-induced seismicity, and might possibly share other characteristics. The Coso Geothermal Field and its surroundings is one of the most seismically active areas in California with a large proportion of its activity occurring as seismic swarms. Here we analyze clustered seismicity in and surrounding the currently produced reservoir comparatively for pre-production and co-production periods. We perform a cluster analysis, based on the inter-event distance in a space-time-energy domain to identify notable earthquake sequences. For each event j, the closest previous event i is identified and their relationship categorized. If this nearest neighbor’s distance is below a threshold based on the local minimum of the bimodal distribution of nearest neighbor distances, then the event j is included in the cluster as a child to this parent event i. If it is above the threshold, event j begins a new cluster. This process identifies subsets of events whose nearest neighbor distances and relative timing qualify as a cluster as well as a characterizing the parent-child relationships among events in the cluster. We apply this method to three different catalogs: (1) a two-year microseismic survey of the Coso geothermal area that was acquired before exploration drilling in the area began; (2) the HYS_catalog_2013 that contains 52,000 double-difference relocated events and covers the years 1981 to 2013; and (3) a catalog of 57,000 events with absolute locations from the local network recorded between 2002 and 2007. Using this method we identify 10 clusters of more than 20 events each in the pre-production survey and more than 200 distinct seismicity clusters that each contain at least 20 and up to more than 1000 earthquakes in the more extensive catalogs. The cluster identification method used yields a hierarchy of links between multiple generations of parent and offspring events. We analyze different topological parameters of this hierarchy to better characterize and thus differentiate natural swarms from induced clustered seismicity and also to identify aftershock sequences of notable mainshocks. We find that the branching characteristic given by the average number of child events per parent event is significantly different for clusters below than for clusters around the produced field.

Conference Paper↗

USGS2014

Eruptions at Lone Star geyser, Yellowstone National Park, USA: 2. Constraints on subsurface dynamics

We use seismic, tilt, lidar, thermal, and gravity data from 32 consecutive eruption cycles of Lone Star geyser in Yellowstone National Park to identify key subsurface processes throughout the geyser's eruption cycle. Previously, we described measurements and analyses associated with the geyser's erupting jet dynamics. Here we show that seismicity is dominated by hydrothermal tremor (~5–40 Hz) attributed to the nucleation and/or collapse of vapor bubbles. Water discharge during eruption preplay triggers high-amplitude tremor pulses from a back azimuth aligned with the geyser cone, but during the rest of the eruption cycle it is shifted to the east-northeast. Moreover, ~4 min period ground surface displacements recur every 26 ± 8 min and are uncorrelated with the eruption cycle. Based on these observations, we conclude that (1) the dynamical behavior of the geyser is controlled by the thermo-mechanical coupling between the geyser conduit and a laterally offset reservoir periodically filled with a highly compressible two-phase mixture, (2) liquid and steam slugs periodically ascend into the shallow crust near the geyser system inducing detectable deformation, (3) eruptions occur when the pressure decrease associated with overflow from geyser conduit during preplay triggers an unstable feedback between vapor generation (cavitation) and mass discharge, and (4) flow choking at a constriction in the conduit arrests the runaway process and increases the saturated vapor pressure in the reservoir by a factor of ~10 during eruptions.

Wyoming↗

USGS2013

ULFEM time series analysis package

This manual describes how to use the Ultra-Low-Frequency ElectroMagnetic (ULFEM) software package. Casual users can read the quick-start guide and will probably not need any more information than this. For users who may wish to modify the code, we provide further description of the routines.

Open-File Report↗

USGS2011

Evidence from lava flows for complex polarity transitions: The new composite Steens Mountain reversal record

Geomagnetic polarity transitions may be significantly more complex than are currently depicted in many sedimentary and lava-flow records. By splicing together paleomagnetic results from earlier studies at Steens Mountain with those from three newly studied sections of Oregon Plateau flood basalts at Catlow Peak and Poker Jim Ridge 70–90 km to the southeast and west, respectively, we provide support for this interpretation with the most detailed account of a magnetic field reversal yet observed in volcanic rocks. Forty-five new distinguishable transitional (T) directions together with 30 earlier ones reveal a much more complex and detailed record of the 16.7 Ma reversed (R)-to-normal (N) polarity transition that marks the end of Chron C5Cr. Compared to the earlier R-T-N-T-N reversal record, the new record can be described as R-T-N-T-N-T-R-T-N. The composite record confirms earlier features, adds new west and up directions and an entire large N-T-R-T segment to the path, and fills in directions on the path between earlier directional jumps. Persistent virtual geomagnetic pole (VGP) clusters and separate VGPs have a preference for previously described longitudinal bands from transition study compilations, which suggests the presence of features at the core–mantle boundary that influence the flow of core fluid and distribution of magnetic flux. Overall the record is consistent with the generalization that VGP paths vary greatly from reversal to reversal and depend on the location of the observer. Rates of secular variation confirm that the flows comprising these sections were erupted rapidly, with maximum rates estimated to be 85–120 m ka −1 at Catlow and 130–195 m ka −1 at Poker Jim South. Paleomagnetic poles from other studies are combined with 32 non-transitional poles found here to give a clockwise rotation of the Oregon Plateau of 11.4°± 5.6° with respect to the younger Columbia River Basalt Group flows to the north and 14.5°± 4.6° with respect to cratonic North America (95 per cent confidence interval).

Geophysical Journal International↗

USGS2011

ATV magnetometer systems for efficient ground magnetic surveying

Ground magnetic data contain information, not pre-sent in aeromagnetic data, which may be useful for precisely mapping near-surface faults and contacts, as well as constraining or aiding interpretation of other geophysical methods. However, collecting ground magnetic data on foot is labor-intensive and is therefore limited to small surveys. In this article, we present two newly developed all-terrain vehicle (ATV) magnetometer systems that significantly expand the survey area that is possible in a ground magnetic survey without greatly reducing the quality of data.

The Leading Edge↗

USGS2011

Documentation for a web site to serve ULF-EM (Ultra-Low Frequency Electromagnetic) data to the public

The Stanford Ultra-Low Frequency Electromagnetic (ULF-EM) Monitoring Project is recording naturally varying electromagnetic signals adjacent to active earthquake faults, in an attempt to establish whether there is any variation in these signals associated with earthquakes. Our project is collaborative between Stanford University, the U.S. Geological Survey (USGS), and UC Berkeley. Lead scientists are Simon Klemperer (Stanford University), Jonathan Glen (USGS) and Darcy Karakelian McPhee (USGS). Our initial sites are in the San Francisco Bay Area, monitoring different strands of the San Andreas fault system, at Stanford University's Jasper Ridge Biological Preserve (JRSC), Marin Headlands of the Golden Gate National Recreation Area (MHDL), and the UC Berkeley's Russell Reservation Field Station adjacent to Briones Regional Park (BRIB). In addition, we maintain in conjunction with the Berkeley Seismological Laboratory (BSL) two remote reference stations at the Bear Valley Ranch in Parkfield, Calif., (PKD) and the San Andreas Geophysical Observatory at Hollister, Calif., (SAO). Metadata about our site can be found at http://ulfem-data.stanford.edu/info.html. Site descriptions can be found at the BSL at http://seismo.berkeley.edu/, and seismic data can be obtained from the Northern California Earthquake Data Center at http://www.ncedc.org/. The site http://ulfem-data.stanford.edu/ allows access to data from the Stanford-USGS sites JRSC, MHDL and BRIB, as well as UC Berkeley sites PKD and SAO.

Open-File Report↗

USGS2010

The age of the Steens reversal and the Columbia River Basalt Group

The Columbia River Basalt Group (CRBG) eruptions have a well-defined relative magnetostratigraphy but have not been definitively correlated to the geomagnetic polarity time scale. 40 Ar/ 39 Ar ages are presented from lavas erupted in the R 0 through N 1 magnetozones of the CRBG and in the transition between R 0 and N 0 . Four ages from transitionally magnetized lava flows at Steens Mountain, Catlow Peak, and Poker Jim Ridge with a weighted mean age 16.58 ± 0.10 Ma 1 and the more precise age 16.654 ± 0.025 Ma of the normally magnetized Oregon Canyon tuff at the top of the Catlow Peak section show that the oldest CRBG magnetozone ( R 0 ) correlates with the C5Cr chron. Bayesian statistical analysis applied to data from four flows at Catlow Peak (using the mean age of the Steens reversal) gives a best and preferred age of the Steens reversal of 16.73 + 0.13/−0.08 Ma (95% confidence). Depending on the geomagnetic polarity time scale model, the eruption rate from N 0 through R 2 (0.34–0.45 Ma in the middle and the bulk of the CRBG emplacement) averaged 0.30–0.41 km 3 /a and peaked at a rate 1 1/2 to 4 1/2 times higher during R 2.

Chemical Geology↗

USGS2009

Geophysical Studies in the Vicinity of the Warner Mountains and Surprise Valley, Northeast California, Northwest Nevada, and Southern Oregon

From May 2006 to August 2007, the U.S. Geological Survey (USGS) collected 793 gravity stations, about 102 line-kilometers of truck-towed and ground magnetometer data, and about 325 physical-property measurements in northeastern California, northwestern Nevada, and southern Oregon. Gravity, magnetic, and physical-property data were collected to study regional crustal structures and geology as an aid to understanding the geologic framework of the Surprise Valley geothermal area and, in general, geothermal systems throughout the Great Basin. The Warner Mountains and Surprise Valley mark the transition from the extended Basin and Range province to the unextended Modoc Plateau. This transition zone, in the northwestern corner of the Basin and Range, is relatively diffuse compared to other, more distinct boundaries, such as the Wasatch front in Utah and the eastern Sierran range front. In addition, this transition zone is the site of a geothermal system with potential for development, and previous studies have revealed a complex structural setting consisting of several obliquely oriented fault sets. As a result, this region has been the subject of several recent geological and geophysical investigations. The gravity and magnetic data presented here support and supplement those studies, and although the study area is composed predominantly of Tertiary volcanic rocks of the Modoc Plateau rocks, the physical properties of these and others rocks create a distinguishable pattern of gravity and magnetic anomalies that can be used to infer subsurface geologic structure.

Open-File Report↗

USGS2009

The Longview/Lakeview barite deposits, southern National Petroleum Reserve, Alaska (NPRA) — Potential-field models and preliminary size estimates

Longview and Lakeview are two of the larger stratiform barite deposits hosted in Mississippian Akmalik Chert in the Cutaway Basin area (Howard Pass C-3 quadrangle) of the southern National Petroleum Reserve, Alaska (NPRA). Geologic studies for the South NPRA Integrated Activity Plan and Environmental Impact Statement process included an attempt to evaluate the possible size of barite resources at Longview and Lakeview by using potential-field geophysical methods (gravity and magnetics). Gravity data from 227 new stations measured by the U.S. Geological Survey, sparse regional gravity data, and new, high-resolution aeromagnetic data were forward modeled simultaneously along seven profiles perpendicular to strike and two profiles along strike of the Longview and Lakeview deposits. These models indicate details of the size and shape of the barite deposits and suggest thicknesses of 15 to 24 m, and 9 to 24 m for the Longview and Lakeview deposits, respectively. Two groups of outcrops span 1.8 km of strike length and are likely connected below the surface by barite as much as 10 m thick. Barite of significant thickness (>-5 m) is unlikely to occur north of the presently known exposures of the Longview deposit. The barite bodies have irregular (nonplanar) bases suggestive of folding; northwest-trending structures of small apparent offset cross strike at several locations. Dip of the barite is 10 to 25 degrees to the southeast. True width of the bodies (the least certain dimension) is estimated to be 160 to 200 m for Longview and 220 to 260 m for Lakeview. The two bodies contain a minimum of 4.5 million metric tons of barite and more than 38 million metric tons are possible. Grades of the barite are relatively high, with high specific gravities and low impurities. The potential for the Cutaway Basin to host economically minable quantities of barite is uncertain. Heavy-mineral concentrate samples from streams in the area, trace-element analyses, and physicalproperty measurements of bulk samples derived from trenching or drilling would be valuable for future assessment work.

Alaska↗