USGS Science⌕ Search

Geology topics

John W. Lane

Publications and source records attributed to John W. Lane.

At least 37 records · Page 2Linked to original sources
USGS2019

Geophysical assessment of a proposed landfill site in Fredericktown, Missouri

In June 2018, U.S. Geological Survey in cooperation with the U.S. Environmental Protection Agency (EPA) collected geophysical measurements to help evaluate the suitability of a proposed landfill site for disposing mine-waste materials in Fredericktown, MO. The geophysical investigation included electromagnetic induction, electrical resistivity tomography, horizontal-to-vertical spectral ratio passive seismic, and shear-wave refraction to characterize the unconsolidated sediment or regolith above the bedrock and the depth to crystalline bedrock. Water-based electromagnetic surveys and forward looking infrared imagery were used along the lake shoreline to identify potential groundwater-surface water interactions. Nested piezometers were installed at two locations along the shoreline to further characterize and validate the groundwater-surface water interactions identified with geophysical methods. Collectively, geophysical surveys were used to evaluate the overall suitability of the proposed site for use as a mine waste-soil and sediment repository and to evaluate this suite of geophysical methods for rapid collection and assessment of very shallow sediments.

Missouri↗
USGS2019

Application of a towed time-domain electromagnetic (tTEM) imaging system in Jamestown, North Dakota

Time-Domain Electromagnetic (EM) methods have been used for decades in support of groundwater investigations. A new towed Time-Domain EM system called “tTEM”, designed by Aarhus University, is being tested and evaluated under a collaborative research agreement with the U.S. Geological Survey (USGS). The tTEM system is rapid and efficient, providing high-resolution, nearly continuous profiles of subsurface resistivity useful for hydrostratigraphic mapping and assessment of aquifer materials. Here we provide an example of a tTEM survey conducted in Jamestown, North Dakota (ND). The purpose of the ND investigation was to assess tTEM the ability of the system to map coarse-grained materials within the Spiritwood Aquifer. The tTEM survey results compare favorably with the results of an airborne EM (AEM) survey previously conducted in the area and to lithologic logs from nearby boreholes.

North Dakota↗
USGS2019

Remembering F. Peter Haeni - "What did we learn from this?"

Frederick Peter (‘Pete’) Haeni grew up on Long Island, New York, where he developed a lifelong love of the water —–a love that continued with his family in Deep River, Connecticut, and at their Eagle Island cottage in Maine. Pete was always at home on the water — whether sailing, motor boating, or collecting geophysical data. We remember Pete for a life well-lived and specifically for his contributions to and impact on the science of near-surface geophysics.

Conference Paper↗
USGS2019

Hydrogeology of an alpine talus aquifer: Cordillera Blanca, Peru

The dramatic loss of glacial mass in low latitudes is causing shifts in downstream water availability and use during the driest months of the year. The world’s largest concentration of tropical glaciers lies in the Cordillera Blanca range of Peru, where glacial runoff is declining and regional stresses are emerging over water resources. Throughout the Cordillera Blanca, groundwater inputs from alpine meadow–talus complexes, locally known as pampas, supply proglacial streams with up to 80% of their flow during the region’s dry season. Structural knowledge of the pampa aquifers is needed to estimate their drainable groundwater storage capacity and residence time, to elucidate the role and importance of alpine groundwater storage in the regional water budget of the Cordillera Blanca. To understand the structure of these proglacial aquifers, multiple near-surface geophysical methods were implemented in a proglacial valley near dense networks of spring-fed tributaries. Geophysical results and borehole logs suggest groundwater is stored in a confined aquifer composed of buried talus deposits overlain by lacustrine clay, while deeper portions of the unit, 10–15 m in depth, are relatively clay-free and more hydraulically conductive. Based on these findings and assumptions of aquifer porosity, the pampas of the Callejon de Huaylas may store from 0.006 to 0.02 km 3 of groundwater. Furthermore, these findings suggest that the talus aquifers of the Cordillera Blanca were formed in proglacial lakes, followed by infilling with fine lacustrine sediments that confine lower units and allow for groundwater discharge to springs via macropores and preferential flow.

Hydrogeology Journal↗
USGS2019

Wetland-scale mapping of preferential fresh groundwater discharge to the Colorado River

Quantitative evaluation of groundwater/surface water exchange dynamics is universally challenging in large river systems, because existing methodology often does not yield spatially‐distributed data and is difficult to apply in deeper water. Here we apply a combined near‐surface geophysical and direct groundwater chemical toolkit to refine fresh groundwater discharge estimates to the Colorado River through a 4‐km 2 wetland that borders the town of Moab, Utah, USA. Preliminary characterization of raw electromagnetic imaging (EMI) data, collected by kayak and by walking, was used to guide additional direct‐contact electrical measurements and installation of new monitoring wells. Chemical data from the wells strongly supported the EMI spatial characterization of preferential fresh groundwater discharge embedded in natural brine groundwaters and weighted to the southern wetland section. Inversion of the EMI data revealed sub‐meter scale detail regarding bulk electrical conductivity zonation across approximately 15.5 km of transects, collected in only 3 days. This electrical detail indicates processes such as salinization of the unsaturated zone and direct discharge through the Colorado River sediments and a tributary creek bed. Overall, the study contributed to a substantial reduction in fresh groundwater discharge estimates previously made using sparse existing well data and a simplified assumption of diffuse fresh groundwater discharge below the entire wetland. EMI will likely become a widely used tool in systems with natural electrical contrast as groundwater/surface water hydrogeologists continue to recognize the prevalence of preferential groundwater discharge processes.

Groundwater↗
USGS2019

Residence time controls on the fate of nitrogen in flow‐through lakebed sediments

For many glacial lakes with highly permeable sediments, water exchange rates control hydrologic residence times within the sediment‐water interface (SWI) and the removal of reactive compounds such as nitrate, a common pollutant in lakes and groundwater. Here we conducted a series of focused tracer injection experiments in the upper 20 cm of the naturally downwelling SWI in a flow‐through lake on Cape Cod, MA. We systematically varied residence time and reactant controls on nitrate processing, using isotopically labeled 15 N nitrate to monitor the effect of these changes on nitrate removal via denitrification. The addition of acetate, a labile carbon compound, triggered the lake SWI to switch from net production to net removal of nitrate. When acetate was combined with increased residence time created by controlled reductions in water flux, we observed a fivefold increase in nitrate removal, a 26‐fold increase in N 2 production, and a 42‐fold increase in N 2 O production. We demonstrate that water residence time is an important control on the fate of nitrate in these lake SWIs and illustrate that seasonal conditions that alter lake exchange rates and variability in lake carbon may predict dynamic nitrate removal across the SWI. Additionally, observed N 2 O production during the oxic pore water experiments paired with geophysical characterization of the sediment porosity revealed that the lake SWI has less mobile pores occupying upward of 50% of the total porosity volume, which function as reactive microzones for nitrate processing.

Journal of Geophysical Research: Biogeosciences↗
USGS2019

Geophysical mapping of plume discharge to surface water at a crude oil spill site: Inversion versus machine learning

The interpretation of geophysical survey results to answer hydrologic, engineering, and geologic questions is critical to diverse problems for management of water, energy, and mineral resources. Although geophysical images provide valuable qualitative insight into subsurface architecture and conditions, translating geophysical images into quantitative information (e.g., saturation, concentration, and hydraulic properties) often involves substantial nonuniqueness and uncertainty owing to the limited resolution of geophysical imaging and uncertainty in petrophysical relations. We have developed a machine-learning approach to address these challenges in the context of a field-based investigation to map zones where a hydrocarbon plume was discharging to surface water at the National Crude Oil Spill Fate and Natural Attenuation Research Site in Bemidji, Minnesota, USA. The two-step approach combines multiple types of geophysical and direct information and effectively bypasses inversion and its associated assumptions. Integrating multifrequency electromagnetic induction, ground-penetrating radar, and fluid-sampling data, we first identify discharge zones and second estimate specific conductance versus depth. Compared with conventional inversion results, the machine-learning results (1) directly address the study objectives (delineating the discharge zones); (2) better extract depth-dependent information from the data, for which sensitivity diminishes rapidly with depth; and (3) quantify the uncertainty of the predictions (i.e., discharge versus nondischarge zones), rather than the uncertainty of the geophysical estimates (i.e., the standard error of estimation for the logarithm of electrical conductivity).

Minnesota↗
USGS2018

Efficient hydrogeological characterization of remote stream corridors using drones

This project demonstrates the successful use of small unoccupied aircraft system (sUASs) for hydrogeological characterization of a remote stream reach in a rugged mountain terrain. Thermal infrared, visual imagery, and derived digital surface models are used to inform conceptual models of groundwater/surface‐water exchange and efficiently geolocate zones of preferential groundwater discharge that can be quantified using various ground‐based methodology.

Hydrological Processes↗
USGS2018

The dual‐domain porosity apparatus: Characterizing dual porosity at the sediment/water interface

The characterization of pore-space connectivity in porous media at the sediment/water interface is critical to understanding contaminant transport and reactive biogeochemical processes in zones of groundwater and surface-water exchange. Previous in situ studies of dual-domain (i.e., mobile/less-mobile porosity) studies have been limited to solute tracer injections at scales of meters to 100s of meters and subsequent numerical model parameterization using fluid concentration histories. Pairing fine-scale (e.g., sub-meter) geoelectrical measurements with fluid tracer data over time alleviates dependence on flowpath-scale experiments, enabling spatially targeted characterization of shallow sediment/water interface media where biogeochemical reactivity is often high. The Dual-Domain Porosity Apparatus is a field-tested device capable of variable rate-controlled downward flow experiments. The Dual-Domain Porosity Apparatus facilitates meter-scale inference of dual-domain parameters, i.e., mobile/less-mobile exchange rate coefficient and the ratio of less mobile to mobile porosity. The Dual-Domain Porosity Apparatus experimental procedure uses water electrical conductivity as a conservative tracer of differential loading and flushing of pore spaces within the region of measurement. Variable injection rates permit the direct quantification of the flow-dependence of dual-domain parameters, which has been theorized for decades but remains challenging to assess using existing experimental methodologies.

Groundwater↗
USGS2018

Hydrogeochemical controls on brook trout spawning habitats in a coastal stream

Brook trout ( Salvelinus fontinalis ) spawn in fall and overwintering egg development can benefit from stable, relatively warm temperatures in groundwater-seepage zones. However, eggs are also sensitive to dissolved oxygen concentration, which may be reduced in discharging groundwater (i.e., seepage). We investigated a 2 km reach of the coastal Quashnet River in Cape Cod, Massachusetts, USA, to relate preferred fish spawning habitats to geology, geomorphology, and discharging groundwater geochemistry. Thermal reconnaissance methods were used to locate zones of rapid groundwater discharge, which were predominantly found along the central channel of a wider stream valley section. Pore-water chemistry and temporal vertical groundwater flux were measured at a subset of these zones during field campaigns over several seasons. Seepage zones in open-valley sub-reaches generally showed suboxic conditions and higher dissolved solutes compared to the underlying glacial outwash aquifer. These discharge zones were cross-referenced with preferred brook trout redds and evaluated during 10 years of observation, all of which were associated with discrete alcove features in steep cutbanks, where stream meander bends intersect the glacial valley walls. Seepage in these repeat spawning zones was generally stronger and more variable than in open-valley sites, with higher dissolved oxygen and reduced solute concentrations. The combined evidence indicates that regional groundwater discharge along the broader valley bottom is predominantly suboxic due to the influence of near-stream organic deposits; trout show no obvious preference for these zones when spawning. However, the meander bends that cut into sandy deposits near the valley walls generate strong oxic seepage zones that are utilized routinely for redd construction and the overwintering of trout eggs. Stable water isotopic data support the conclusion that repeat spawning zones are located directly on preferential discharges of more localized groundwater. In similar coastal systems with extensive valley peat deposits, the specific use of groundwater-discharge points by brook trout may be limited to morphologies such as cutbanks, where groundwater flow paths do not encounter substantial buried organic material and remain oxygen-rich.

Hydrology and Earth System Sciences↗
USGS2018

Inversion of data from electrical resistivity imaging surveys in water-covered areas

Electrical resistivity imaging surveys widely used in many environmental and engineering studies have also been conducted in water-covered areas. Surveys in water-covered areas include conventional surveys using multi-electrode resistivity systems where part of the survey line crosses a river or stream, and surveys conducted entirely within a water-covered environment. Surveys that are located entirely within a water-covered environment utilise electrodes mounted on a streamer, towed behind a boat. The streamer can be dragged along the water bottom, or float on the water surface. In this paper, the smoothness-constrained least-squares inversion method commonly used to interpret electrical resistivity imaging data from land surveys is adapted for underwater surveys. To accommodate the water bottom topography, a distorted finite-element grid is used to calculate the apparent resistivity values for the inversion model. The first few rows of elements are used to model the water layer, while the lower part of the grid is used for the sub-bottom resistivity distribution. For robust inversion, the water column resistivity and geometry must be known accurately as a large proportion of the current flows through the water layer. The section of the Earth below the bottom surface is subdivided into a large number of rectangular cells. The water column resistivity and geometry in the earth model is fixed, and the inversion program attempts to determine the resistivity of the cells that would most accurately reproduce the observed resistivity measurements. Implementation of water column resistivity and geometric constraints is demonstrated using numerical simulations and field data. Examples of electrical resistivity imaging surveys conducted on and across water bodies including rivers and near-shore marine environments are shown.

Exploration Geophysics↗
USGS2018

Seismic hazard classifications and Vs30 in Connecticut using MASW and HVSR methods

Five new seismic hazard classifications for Hartford County, Connecticut (CT), were proposed by New England State Geologists (NESG) in an effort to improve the current USGS Seismic Hazard Map. These classes were derived from mapped surficial materials, but in situ information is required to verify this approach. Therefore, active and passive surface wave techniques were performed at thirty field sites to determine V S30 and compare the results to the NESG map. Passive data were processed using the Horizontal-to-Vertical Spectral Ratio (HVSR); active data were processed with the multi-channel analysis of surface waves (MASW) technique. The field investigation demonstrated that the surficial material-based system was not sufficient for 66% of the field sites and in-situ velocity information from at least two methods should be considered for improved classification. The geophysical work discussed here represents the first field de-rived V S30 values for Hartford County, CT.

Conference Paper↗
USGS2018

Direct observations of hydrologic exchange occurring with less‐mobile porosity and the development of anoxic microzones in sandy lakebed sediments

Quantifying coupled mobile/less‐mobile porosity dynamics is critical to the prediction of biogeochemical storage, release, and transformation processes in the zone where groundwater and surface water exchange. The recent development of fine‐scale geoelectrical monitoring paired with pore‐water sampling in groundwater systems enables direct characterization of hydrologic exchange between more‐ and less‐mobile porosity during tracer tests. We adapt this technique to sandy interface sediments at a groundwater flow‐through kettle lake. Tracer experiments were conducted within controlled‐head permeameters over a range of specified downward flow conditions over several days. Although the bed was predominantly composed of highly permeable sands and gravels, cobble inclusions created less‐mobile flow zones at the centimeter scale. Less‐mobile porosity fractions, residence times, and rates of exchange were inferred from paired bulk and fluid electrical conductivity data, without the need for inverse model calibration. The conservative solute experiments were paired with 15 NO 3 − and other reactive amendments, revealing anaerobic processes occurring at shallow sediment depths where pore‐water sampling indicated bulk‐oxic conditions. The average less‐mobile porosity residence times as evaluated with the geoelectrical method were on 1‐hr timescales, which appear to be biogeochemically important in the context of creating anoxic microzones within less‐mobile porosity of sandy interface sediments.

Water Resources Research↗
USGS2018

MoisturEC: a new R program for moisture content estimation from electrical conductivity data

Noninvasive geophysical estimation of soil moisture has potential to improve understanding of flow in the unsaturated zone for problems involving agricultural management, aquifer recharge, and optimization of landfill design and operations. In principle, several geophysical techniques (e.g., electrical resistivity, electromagnetic induction, and nuclear magnetic resonance) offer insight into soil moisture, but data‐analysis tools are needed to “translate” geophysical results into estimates of soil moisture, consistent with (1) the uncertainty of this translation and (2) direct measurements of moisture. Although geostatistical frameworks exist for this purpose, straightforward and user‐friendly tools are required to fully capitalize on the potential of geophysical information for soil‐moisture estimation. Here, we present MoisturEC, a simple R program with a graphical user interface to convert measurements or images of electrical conductivity (EC) to soil moisture. Input includes EC values, point moisture estimates, and definition of either Archie parameters (based on experimental or literature values) or empirical data of moisture vs. EC. The program produces two‐ and three‐dimensional images of moisture based on available EC and direct measurements of moisture, interpolating between measurement locations using a Tikhonov regularization approach.

Groundwater↗
USGS2018

Shallow bedrock limits groundwater seepage-based headwater climate refugia

Groundwater/surface-water exchanges in streams are inexorably linked to adjacent aquifer dynamics. As surface-water temperatures continue to increase with climate warming, refugia created by groundwater connectivity is expected to enable cold water fish species to survive. The shallow alluvial aquifers that source groundwater seepage to headwater streams, however, may also be sensitive to seasonal and long-term air temperature dynamics. Depth to bedrock can directly influence shallow aquifer flow and thermal sensitivity, but is typically ill-defined along the stream corridor in steep mountain catchments. We employ rapid, cost-effective passive seismic measurements to evaluate the variable thickness of the shallow colluvial and alluvial aquifer sediments along a headwater stream supporting cold water-dependent brook trout ( Salvelinus fontinalis ) in Shenandoah National Park, VA, USA. Using a mean depth to bedrock of 2.6 m, numerical models predicted strong sensitivity of shallow aquifer temperature to the downward propagation of surface heat. The annual temperature dynamics (annual signal amplitude attenuation and phase shift) of potential seepage sourced from the shallow modeled aquifer were compared to several years of paired observed stream and air temperature records. Annual stream water temperature patterns were found to lag local air temperature by ∼8–19 d along the stream corridor, indicating that thermal exchange between the stream and shallow groundwater is spatially variable. Locations with greater annual signal phase lag were also associated with locally increased amplitude attenuation, further suggestion of year-round buffering of channel water temperature by groundwater seepage. Numerical models of shallow groundwater temperature that incorporate regional expected climate warming trends indicate that the summer cooling capacity of this groundwater seepage will be reduced over time, and lower-elevation stream sections may no longer serve as larger-scale climate refugia for cold water fish species, even with strong groundwater discharge.

Limnologica - Ecology and Management of Inland Wat↗
USGS2018

Inferring watershed hydraulics and cold-water habitat persistence using multi-year air and stream temperature signals

Streams strongly influenced by groundwater discharge may serve as “climate refugia” for sensitive species in regions of increasingly marginal thermal conditions. The main goal of this study is to develop paired air and stream water annual temperature signal analysis techniques to elucidate the relative groundwater contribution to stream water and the effective groundwater flowpath depth. Groundwater discharge to streams attenuates surface water temperature signals, and this attenuation can be diagnostic of groundwater gaining systems. Additionally, discharge from shallow groundwater flowpaths can theoretically transfer lagged annual temperature signals from aquifer to stream water. Here we explore this concept using multi-year temperature records from 120 stream sites located across 18 mountain watersheds of Shenandoah National Park, VA, USA and a coastal watershed in Massachusetts, USA. Both areas constitute important cold-water habitat for native brook trout ( Salvelinus fontinalis ). Observed annual temperature signals indicate a dominance of shallow groundwater discharge to streams in the National Park, in contrast to the coastal watershed that has strong, apparently deeper, groundwater influence. The average phase lag from air to stream signals in Shenandoah National Park is 11 d; however, extended lags of approximately 1 month were observed in a subset of streams. In contrast, the coastal stream has pronounced attenuation of annual temperature signals without notable phase lag. To better understand these observed differences in signal characteristics, analytical and numerical models are used to quantify mixing of the annual temperature signals of surface and groundwater. Simulations using a total heat budget numerical model indicate groundwater-induced annual temperature signal phase lags are likely to show greater downstream propagation than the related signal amplitude attenuation. The measurement of multi-seasonal paired air and water temperatures offers great promise toward understanding catchment processes and informing current cold-water habitat management at ecologically-relevant scales.

Virginia↗
USGS2017

Scenario Evaluator for Electrical Resistivity survey pre-modeling tool

Geophysical tools have much to offer users in environmental, water resource, and geotechnical fields; however, techniques such as electrical resistivity imaging (ERI) are often oversold and/or overinterpreted due to a lack of understanding of the limitations of the techniques, such as the appropriate depth intervals or resolution of the methods. The relationship between ERI data and resistivity is nonlinear; therefore, these limitations depend on site conditions and survey design and are best assessed through forward and inverse modeling exercises prior to field investigations. In this approach, proposed field surveys are first numerically simulated given the expected electrical properties of the site, and the resulting hypothetical data are then analyzed using inverse models. Performing ERI forward/inverse modeling, however, requires substantial expertise and can take many hours to implement. We present a new spreadsheet-based tool, the Scenario Evaluator for Electrical Resistivity (SEER), which features a graphical user interface that allows users to manipulate a resistivity model and instantly view how that model would likely be interpreted by an ERI survey. The SEER tool is intended for use by those who wish to determine the value of including ERI to achieve project goals, and is designed to have broad utility in industry, teaching, and research.

Groundwater↗