Geology topics
John Stevens Schlee
Publications and source records attributed to John Stevens Schlee.
Our changing continent
Explore the source record for details and available documents.
Multichannel seismic-reflection profiles collected along the U.S. continental margin in 1978
During 1978, the U.S.. Geological Survey (USGS) contracted with Geophysical Services, Inc. (GSI) for GSI to collect 4,813 km of 48-channel seismic-reflection profiles along the continental margin between North Carolina and Maine. Fifteen lines were acquired perpendicular to the margin Clines 18 through 32), and six lines were acquired parallel to the margin Clines 33 through 38). The profiles were shot by the Motor Vessel (MV) CARINO and MV CECIL GREEN between May and November 1978. A 3,600-long hydrophone streamer was used; it was composed of 24 groups of 100-m length each near the ship, followed by 24 groups of 50-mlength each. Tuned airgun arrays totaling 2,000 and 1,400 cubic inches of air were used by the MV- CARINO and MV CECIL GREEN, respectively. The profiles were stacked by GSI and displayed in conventional time-variant scaled format to 12 seconds of recording time with vertical scales of .2.5 inches per second and horizontal scales of 1.2 km per inch. Additional protessing was applied to Line 25 across the Baltimore Canyon Trough and Line 32 across the Carolina Trough. Data collected along Line 25 over the Outer Shelf, Slope and upper Rise were restacked with 1 1/2-km-spaced velocity analyses, signature deconvolution, deep-water multiple deconvolution, velocity filtering Con shelf only), and time migration. The restacked part and remaining parts of Line 25 were converted to depth sections having a vertical scale of 1.2 km per inch (vertical exaggeration: 2/1). Data collected along two parts of Line 32 were also restacked with signature and deep-water multiple deconvolution. Line 32 was also converted to a depth section except for the first 80 km near shore. Profiles 18-38 may be inspected at the USGS in Woods Hole, MA 02543. Copies of the profiles may be, purchased only from the National Geophysical and Solar-Terrestrial Data Center, NOAA, Boulder, Co 80303.
A comparison of two Atlantic-type continental margins
Explore the source record for details and available documents.
Summary report of the sediments, structural framework, petroleum potential, and environmental conditions of the United States Mid-Atlantic continental margin in area of proposed Oil & Gas Lease Sale No. 59
This report has been compiled to update and summarize the geological information concerning the area of the Atlantic continental margin off the U.S. Mid-Atlantic proposed for Oil and Gas Lease Sale No. 59 (fig. 1). The region of interest lies between 35° and 41° N and 70.5° and 76° W. The north-south dimension is about 660 km (356 nautical miles, 410 statute miles) and the maximum east-west dimension is approximately 250 km (135 nautical miles, 155 statute miles). The area is centered toward the outer Continental Shelf off Delaware and contains more than 154,000 km2 (38,000,000 acres) off the coasts of North Carolina, Virginia, Maryland, Delaware, New Jersey and New York. Water depths within the region range from 20 to slightly more than 4,000 m (fig. 1). This report begins with a discussion of the regional geology and geophysics, followed by a description of the oil and gas potential and potential environmental hazards.
Summary report of the sediments, structural framework, petroleum potential, and environmental conditions of the United States northeastern Atlantic Continental Margin
Explore the source record for details and available documents.
Stratigraphy and Tertiary development of the continental margin east of Florida
Explore the source record for details and available documents.
Structure of continental margin off Mid-Atlantic states (Baltimore Canyon Trough)
Increasing interest in the Atlantic continental margin as a future petroleum province has resulted in several recent papers (Emmerich, 1974; Burk and Drake, 1974) that attempt to summarize the structure and stratigraphic framework of this area. Most papers tend to portray the margin as a wedge of Mesozoic and Cenozoic sediment that thins at the edge of the shelf over a "basement ridge" and then thickens again under the continental rise. Off the northeastern United States, the sediment wedge under the shelf attains a thickness of 8-11 km in the Georges Bank basin (Schultz and Glover, 1974; Mattick and others, 1974; Sheridan, 1974b; Behrendt and others, 1974) and 12 km in thickness in the Baltimore Canyon trough off the middle Atlantic states of Delaware, Maryland, Virginia and New Jersey (fig. 1). Seaward of the continental shelf and its sediment prism, Emery and Uchupi (1972, figs. 133-135) infer slump deposits (eroded in some areas) covering a buried ridge thought to extend from the Laurentian Channel to Cape Hatteras, where it splits in two. The lower slope and continental rise are inferred by Drake and later investigators to be a thick prism of deep sea sediment (turbidites, hemipelagic clays, slump deposits) overlying oceanic basement in a welt that parallels the continental edge and reaches a maximum thickness of 6 km (Emery and Uchupi, 1972, fig. 188). Our purpose is to present the results of a geophysical survey across the margin seaward of the middle Atlantic states that comments on the structural - stratigraphic framework of the margin.
Shallow structure and stratigraphy of the Liberian continental margin
No abstract available.
Acoustic-reflection profiles, Liberian continental margin: Leg 5, 1971 cruise, UNITEDGEO I
Explore the source record for details and available documents.
The Atlantic Continental Shelf and slope--A program for study
Explore the source record for details and available documents.
Geologic map of the Moquino quadrangle, New Mexico
Explore the source record for details and available documents.
Geologic map of the Mesita quadrangle, New Mexico
Explore the source record for details and available documents.